New apps Added

.HA_VERSION

@@ -1 +1 @@
-2026.6.3
+2026.7.1

.ha_run.lock

@@ -1 +1 @@
-{"pid": 71, "version": 1, "ha_version": "2026.6.3", "start_ts": 1781553089.670326}
+{"pid": 71, "version": 1, "ha_version": "2026.7.1", "start_ts": 1783446559.6159952}

automations.yaml

@@ -189,7 +189,7 @@
       hours: 0
       minutes: 45
       seconds: 0
-    below: 1
+    below: 0.2
     id: freezer_down
   - trigger: numeric_state
     entity_id:
@@ -198,7 +198,7 @@
       hours: 0
       minutes: 20
       seconds: 0
-    below: 1
+    below: 0.2
     id: fridge_down
   conditions: []
   actions:
@@ -303,14 +303,12 @@
   mode: single
 - id: '1781034724187'
   alias: 'Office: Turn Off Lights on Exit'
-  description: Turns off office lights 2 minutes after the door closes, but only if  living
-    room motion was detected after the door shut.
+  description: Turns off office lights 2 minutes after the door closes, but only if
+    living room motion was detected after the door shut.
   triggers:
   - trigger: state
     entity_id: binary_sensor.office_door_contact
     to: 'off'
-    for:
-      minutes: 2
   conditions:
   - condition: state
     entity_id: light.playroom_light
@@ -319,6 +317,8 @@
     value_template: '{{ states.binary_sensor.basement.last_changed > states.binary_sensor.office_door_contact.last_changed
       }}'
   actions:
+  - delay:
+      minutes: 2
   - action: light.turn_off
     target:
       entity_id: light.playroom_light
@@ -708,16 +708,11 @@
     entity_id: sensor.coffee_maker_power
     above: 1000
     id: coffee_started
-  conditions: []
-  actions:
-  - choose:
-    - conditions:
-      - condition: trigger
-        id: coffee_started
+  conditions:
   - condition: state
     entity_id: input_boolean.coffee_maker_running
     state: 'off'
-      sequence:
+  actions:
   - action: input_boolean.turn_on
     target:
       entity_id: input_boolean.coffee_maker_running
@@ -733,13 +728,10 @@
       hours: 0
       minutes: 4
       seconds: 0
-      - wait_for_trigger:
-        - trigger: numeric_state
-          entity_id: sensor.coffee_maker_power
-          below: 350
+  - wait_template: '{{ states(''sensor.coffee_maker_power'') | float(0) < 350 }}'
     timeout:
       hours: 0
-          minutes: 3
+      minutes: 5
       seconds: 0
   - action: input_boolean.turn_off
     target:
@@ -749,3 +741,438 @@
       title: ☕ Coffee Ready
       message: Your coffee is ready to enjoy!
   mode: single
+- id: '1781793117883'
+  alias: Basement Temperature Change
+  description: ''
+  triggers:
+  - type: temperature
+    device_id: 3e67afd88a4b4d17552c8f370aaf40b5
+    entity_id: 64689573a8b11a83829efcae0022d7c1
+    domain: sensor
+    trigger: device
+    above: 15
+    below: 10
+  conditions: []
+  actions:
+  - action: notify.notify
+    metadata: {}
+    data:
+      title: Basement Temperature Change
+      message: Basement Temperature Changed!
+  mode: single
+- id: '1782161891986'
+  alias: 'Notification: Pool Sensor Low Battery'
+  description: Alert when the pool temperature sensor battery drops below 15%
+  triggers:
+  - entity_id: sensor.pool_temperature_battery
+    below: 15
+    trigger: numeric_state
+  conditions: []
+  actions:
+  - data:
+      title: Pool Sensor Battery Low
+      message: The pool temperature sensor battery is currently at {{ states('sensor.pool_temperature_battery')
+        }}%. Please change it soon.
+    action: notify.persistent_notification
+  - action: notify.notify
+    metadata: {}
+    data:
+      title: Pool Sensor Battery Low
+      message: The pool temperature sensor battery is currently at {{ states('sensor.pool_temperature_battery')
+        }}%. Please change it soon.
+  mode: single
+- &id001
+  id: commute_morning_traffic_alert_map
+  alias: 'Commute: Morning Traffic Alert with Map'
+  description: Checks commute times at 7:15 AM and attaches a map if traffic is bad.
+  triggers:
+  - at: 07:15:00
+    trigger: time
+  conditions:
+  - condition: or
+    conditions:
+    - condition: template
+      value_template: '{{ states(''sensor.google_travel_time_work_work'') | float(0)
+        > 35 }}'
+    - condition: template
+      value_template: '{{ states(''sensor.waze_travel_time'') | float(0) > 35 }}'
+  actions:
+  - action: camera.snapshot
+    target:
+      entity_id: camera.camera_commute_map
+    data:
+      filename: /config/www/commute_snapshot.jpg
+  - action: notify.notify
+    data:
+      title: "\U0001F6A8 Commute Delay Alert!"
+      message: "Traffic is heavier than usual this morning. \nGoogle Maps: {{ states('sensor.google_travel_time_work_work')
+        }} mins.  Waze: {{ states('sensor.waze_travel_time') }} mins."
+      data:
+        image: /local/commute_snapshot.jpg
+  - action: notify.persistent_notification
+    data:
+      title: "\U0001F6A8 Commute Delay Alert!"
+      message: "Traffic is heavier than usual this morning. \nGoogle Maps: {{ states('sensor.google_travel_time_work_work')
+        }} mins.  Waze: {{ states('sensor.waze_travel_time') }} mins.\n![Commute Map](/local/commute_snapshot.jpg)"
+  mode: single
+- *id001
+- *id001
+- id: '1782999027626'
+  alias: 'Commute: Morning Traffic Alert'
+  description: Pushes an interactive, live traffic map to my phone before the commute.
+  triggers:
+  - at: 07:15:00
+    trigger: time
+  actions:
+  - action: notify.notify
+    data:
+      title: Morning Commute Traffic
+      message: Swipe down to view live traffic along your route.
+      data:
+        push:
+          category: map
+        action_data:
+          latitude: '45.474668'
+          longitude: '-73.737158'
+          shows_traffic: true
+          shows_scale: true
+- id: '1783000087983'
+  alias: Morning Commute Alert
+  description: Notify when commute is longer than 35 minutes.
+  triggers:
+  - trigger: time
+    at: 07:15:00
+  conditions:
+  - condition: time
+    weekday:
+    - mon
+    - tue
+    - wed
+    - thu
+    - fri
+  - condition: or
+    conditions:
+    - condition: numeric_state
+      entity_id: sensor.google_travel_time_work_work
+      above: 35
+    - condition: numeric_state
+      entity_id: sensor.waze_travel_time
+      above: 35
+  actions:
+  - action: notify.notify
+    data:
+      title: "\U0001F697 Morning Commute"
+      message: "Google: {{ states('sensor.google_travel_time_work_work') }} min\nWaze:
+        {{ states('sensor.waze_travel_time') }} min\n{% set g = states('sensor.google_travel_time_work_work')
+        | float(0) %} {% if g > 50 %} \U0001F6A8 Major traffic delays. {% elif g >
+        40 %} ⚠️ Heavy traffic. {% else %} \U0001F7E1 Moderate traffic. {% endif %}"
+  mode: single
+- id: '1783049020714'
+  alias: Aqara-Magic-Cube-T1-Pro-(CTP-R01) - Franco
+  description: ''
+  use_blueprint:
+    path: SirGoodenough/Zigbee2MQTT-Aqara-Magic-Cube-T1-Pro-CTP-R01-Xiaomi-Lumi.yaml
+    input:
+      topic: zigbee2mqtt/Ziggy
+      action_slide_face_1:
+      - action: light.toggle
+        metadata: {}
+        target:
+          device_id: 2f8c5ab2ca0d4be31919fba6df365813
+        data:
+          brightness_pct: 25
+      action_doubletap_face_1: []
+      action_rotate_cw_face_1:
+      - action: script.cube_dimmer_control
+        metadata: {}
+        data:
+          light: light.playroom_light
+          angle: -20
+      action_rotate_ccw_face_1: []
+      action_flipped90_face_1: []
+- id: '1783162325964'
+  alias: Backyard Shed Camera Motion AI Description
+  description: Takes a snapshot when the Blink camera detects motion, analyzes it
+    with AI, and sends a mobile and persistent notification.
+  triggers:
+  - trigger: state
+    entity_id: binary_sensor.backyard_shed_motion
+    to: 'on'
+  actions:
+  - action: blink.trigger_camera
+    target:
+      entity_id: camera.backyard_shed
+  - delay: 00:00:02
+  - action: camera.snapshot
+    target:
+      entity_id: camera.backyard_shed
+    data:
+      filename: /media/blink.jpg
+  - action: camera.snapshot
+    target:
+      entity_id: camera.backyard_shed
+    data:
+      filename: /config/www/blink.jpg
+  - delay: 00:00:02
+  - action: ai_task.generate_data
+    continue_on_error: true
+    data:
+      task_name: Backyard Shed Camera Analysis
+      entity_id: ai_task.google_ai_task
+      instructions: Describe what you see in this image in brief. Focus on any people,
+        objects, animals or activities. Text needs to be max 240 characters.
+      attachments:
+      - media_content_id: media-source://media_source/local/blink.jpg
+        media_content_type: image/jpeg
+    response_variable: ai_profile
+  - action: notify.notify
+    continue_on_error: true
+    data:
+      title: Motion Detected - Backyard Shed
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}'
+  - action: notify.persistent_notification
+    data:
+      title: Motion Detected - Backyard Shed
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}
+
+        ![Snapshot](/local/blink.jpg)'
+      data:
+        notification_id: backyard_shed_motion
+  mode: queued
+  max: 10
+- id: '1783293479398'
+  alias: Blink Camera Fast Update Cycle
+  description: Polls the Blink cloud every 30 seconds to bypass the default 5-minute
+    delay and force instant motion detection state updates.
+  triggers:
+  - trigger: time_pattern
+    seconds: /30
+  actions:
+  - action: homeassistant.update_entity
+    target:
+      entity_id:
+      - binary_sensor.backyard_shed_motion
+      - binary_sensor.front_door_motion
+  mode: single
+- id: '1783304677475'
+  alias: Motion Detection AI Tree
+  description: Takes a snapshot when the Blink camera detects motion, analyzes it
+    with AI, and sends a mobile and persistent notification.
+  triggers:
+  - trigger: state
+    entity_id: binary_sensor.backyard_tree_motion
+    to: 'on'
+  conditions: []
+  actions:
+  - action: blink.trigger_camera
+    target:
+      entity_id: camera.backyard_tree
+  - delay: 00:00:02
+  - action: camera.snapshot
+    target:
+      entity_id: camera.backyard_tree
+    data:
+      filename: /media/blinkTree.jpg
+  - action: camera.snapshot
+    target:
+      entity_id: camera.backyard_tree
+    data:
+      filename: /config/www/blinkTree.jpg
+  - delay: 00:00:02
+  - action: ai_task.generate_data
+    continue_on_error: true
+    data:
+      task_name: Backyard Shed Camera Analysis
+      entity_id: ai_task.google_ai_task
+      instructions: Describe what you see in this image in brief. Focus on any people,
+        objects, animals or activities. Text needs to be max 240 characters.
+      attachments:
+      - media_content_id: media-source://media_source/local/blinkTree.jpg
+        media_content_type: image/jpeg
+    response_variable: ai_profile
+  - action: notify.notify
+    data:
+      title: Motion Detected - Backyard Tree
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}'
+  - action: persistent_notification.create
+    data:
+      title: Motion Detected - Backyard Tree
+      notification_id: backyard_tree_motion
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}
+
+        ![Snapshot](/local/blinkTree.jpg)'
+  mode: queued
+  max: 10
+- id: '1783387792679'
+  description: Takes a snapshot when the Blink camera detects motion, analyzes it
+    with AI, and sends a mobile and persistent notification.
+  triggers:
+  - trigger: state
+    entity_id: binary_sensor.backyard_shed_motion
+    to: 'on'
+  conditions: []
+  actions:
+  - action: blink.trigger_camera
+    target:
+      entity_id: camera.living_room_living_room_camera
+  - delay: 00:00:02
+  - action: camera.snapshot
+    target:
+      entity_id: camera.living_room_living_room_camera
+    data:
+      filename: /media/blink.jpg
+  - action: camera.snapshot
+    target:
+      entity_id: camera.living_room_living_room_camera
+    data:
+      filename: /config/www/nest.jpg
+  - delay: 00:00:02
+  - action: ai_task.generate_data
+    continue_on_error: true
+    data:
+      task_name: Backyard Shed Camera Analysis
+      entity_id: ai_task.google_ai_task
+      instructions: Describe what you see in this image in brief. Focus on any people,
+        objects, or activities. Text needs to be max 225 characters.
+      attachments:
+      - media_content_id: media-source://media_source/local/nest.jpg
+        media_content_type: image/jpeg
+    response_variable: ai_profile
+  - action: notify.notify
+    data:
+      title: Motion Detected - Backyard Shed
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}'
+  - action: persistent_notification.create
+    data:
+      title: Motion Detected - Backyard Shed
+      notification_id: backyard_shed_motion2
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}
+
+        ![Snapshot](/local/nest.jpg)'
+  mode: queued
+  max: 10
+- id: '1783452320698'
+  alias: Nest Test Motion
+  description: Takes a snapshot when the Blink camera detects motion, analyzes it
+    with AI, and sends a mobile and persistent notification.
+  triggers:
+  - trigger: state
+    entity_id: binary_sensor.backyard_tree_motion
+    to: 'on'
+  conditions: []
+  actions:
+  - delay: 00:00:02
+  - action: camera.snapshot
+    target:
+      entity_id:
+      - camera.front
+      - camera.backyard_shed
+    data:
+      filename: /media/nest_Living2.jpg
+  - action: camera.snapshot
+    target:
+      entity_id: camera.backyard_tree
+    data:
+      filename: /config/www/blinkTree.jpg
+  - delay: 00:00:02
+  - action: ai_task.generate_data
+    continue_on_error: true
+    data:
+      task_name: Backyard Shed Camera Analysis
+      entity_id: ai_task.google_ai_task
+      instructions: Describe what you see in this image in brief. Focus on any people,
+        objects, or activities. Text needs to be max 225 characters.
+      attachments:
+      - media_content_id: media-source://media_source/local/blinkTree.jpg
+        media_content_type: image/jpeg
+    response_variable: ai_profile
+  - action: notify.notify
+    data:
+      title: Motion Detected - Backyard Tree
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}'
+  - action: persistent_notification.create
+    data:
+      title: Motion Detected - Backyard Tree
+      notification_id: backyard_tree_motion
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}
+
+        ![Snapshot](/local/blinkTree.jpg)'
+  mode: queued
+  max: 10
+- id: '1783469453396'
+  alias: Motion Front Door  - AI Description
+  description: Takes a snapshot when the Nest camera detects motion, a person, an
+    animal, or a doorbell press, analyzes it with AI, and sends a mobile and persistent
+    notification.
+  triggers:
+  - trigger: event
+    event_type: state_changed
+    event_data:
+      entity_id: event.front_door_front_door_motion
+  conditions:
+  - condition: template
+    value_template: '{{ trigger.event.data.new_state.attributes.event_type in [''motion'',
+      ''person'', ''animal'', ''chime''] }}'
+  actions:
+  - action: blink.trigger_camera
+    target:
+      entity_id: camera.front
+    data: {}
+  - delay: 00:00:02
+  - action: camera.snapshot
+    target:
+      entity_id: camera.front
+    data:
+      filename: /media/blink_Front.jpg
+  - action: camera.snapshot
+    target:
+      entity_id: camera.front
+    data:
+      filename: /config/www/blink_Front.jpg
+  - delay: 00:00:02
+  - action: ai_task.generate_data
+    continue_on_error: true
+    data:
+      task_name: Nest Front Camera Analysis
+      entity_id: ai_task.google_ai_task
+      instructions: Describe what you see in this image in brief. Focus on any people,
+        objects, animals or activities. Text needs to be max 240 characters.
+      attachments:
+      - media_content_id: media-source://media_source/local/blink_Front.jpg
+        media_content_type: image/jpeg
+    response_variable: ai_profile
+  - action: notify.notify
+    continue_on_error: true
+    data:
+      title: Motion Detected - Backyard Shed
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}'
+  - action: notify.persistent_notification
+    data:
+      title: Motion Detected - Backyard Shed
+      message: '{{ ai_profile.data if ai_profile is defined and ''data'' in ai_profile
+        else ''Motion detected, but the AI Task integration failed to return a response.''
+        }}
+
+        ![Snapshot](/local/blink_Front.jpg)'
+      data:
+        notification_id: nest_front_motion
+  mode: queued
+  max: 10

blueprints/script/SirGoodenough/dimmer_control_4_magic_cube.yaml

@@ -0,0 +1,153 @@
+blueprint:
+  name: dimmer_control_4_magic_cube_and_other_things - 2023-12-07
+  author: SirGoodenough
+  domain: script
+  homeassistant:
+    min_version: 2023.8.0
+  source_url: https://github.com/SirGoodenough/HA_Blueprints/blob/master/Scripts/dimmer_control_4_magic_cube.yaml
+  description: "This script was invented to be used with my Magic Cube Blueprints.
+    I released it as a standalone Script Blueprint because I saw others struggling
+    with how so convert cube rotation to light dimming in other places.\n\nTo use
+    this blueprint, install it from the source in the normal way. After that add your
+    unique name for the Script, and add an icon and change the entity_id if desired.
+    You should only need to run the blueprint once, as you will be calling the unique
+    name/entity you added above to use the code. This script has 2 inputs in the Blueprint
+    screen to set the sensitivity of the rotation action and the minimum bbrightness
+    level for your lights. If the rotation is too sensitive the lights will change
+    from dim to bright in too short of a rotation so make it less sensitive. If the
+    lights flicker at low brightness, raise the minimum brightness level to stop it.
+    The data is sent to the generated script to control the action live at each use.
+    You only need to ececute this blueprint generator script if you wish to change
+    in input values or create another dimmer script.\n\nThis requires you call this
+    script wth 2 data values. One is a positive or negative number between 360 and
+    -360 that in the original, represents the input angle from the cube movement.
+    The other data point is the entity of the light or light group that you are trying
+    to control.\n***NOTE:*** the trigger variable below will be different for Z2M
+    and ZHA and others. Look at my documentation for that cube integration help if
+    you need it.\n\n## \U0001F5FFNotice\U0001F46E\U0001F3FF‍♂️:\n* Copies of the original
+    Blueprint that were converted via the 'Take Control' feature or other means are
+    officially not supported by me.\n\n* I may or may not be able to support you when
+    you have a problem after you make changes to my code, as some of the code is no
+    longer mine.\n\n* I & my license also require attribution as a link back to the
+    original should you use this code in your own creation.\n\n* [Here is a link to
+    my license & the original github post](https://github.com/SirGoodenough/HA_Blueprints?tab=License-1-ov-file)
+    expected to be followed & referenced as attribution should you use this code elsewhere.\n\n
+    \ Sample call / use of this script for ZHA:\n    ```yaml\n    - action: script.cube_dimmer_control_bp\n
+    \     data:\n        angle: '{{ trigger.event.data.args.relative_degrees | default(0.1)
+    | float(0.2) }}'\n        light: light.grp_studio\n    ```\n\n  Sample call /
+    use of this script for Z2M:\n    ```yaml\n    - action: script.cube_dimmer_control_bp\n
+    \     data:\n        angle: '{{ trigger.payload_json.action_angle | default(0.1)
+    | float(0.2) }}'\n        light: light.grp_kitch\n    ```\n"
+  input:
+    sensi:
+      name: Sensitivity of the cube rotational motion.
+      description: 'This sets how ''fast'' the changes happen compared to how far
+        you move the cube. Higher percentage is faster, lower is slower.
+
+        I have found that 40% is a good number, but you can adjust as desired.
+
+        '
+      default: 40
+      selector:
+        number:
+          min: 1.0
+          max: 200.0
+          step: 1.0
+          mode: box
+    min_b:
+      name: Minimum Brighness
+      description: 'This sets the lowest brightness it will set before it turns off.
+        Some bulbs react poorly below a certain percent, you can adjust that here.
+
+        I have found that 10% is a good number, but you can adjust as desired.
+
+        '
+      default: 10
+      selector:
+        number:
+          min: 5.0
+          max: 90.0
+          step: 1.0
+          mode: slider
+    transition_i:
+      name: Transition Input
+      description: Seconds to take to change light one level to another
+      default: []
+      selector:
+        number:
+          min: 0.0
+          max: 1800.0
+          step: 0.5
+          mode: slider
+fields:
+  angle:
+    name: Angle to represent new brightness
+    description: ' This is the new angle to be used in the calculation for Brightness'
+    required: true
+    example: '-120.7'
+    default: -120.7
+    selector:
+      number:
+        min: -360
+        max: 360
+        step: 0.1
+        mode: box
+  light:
+    name: Light entity to control
+    description: Add the light entity you want to control here
+    required: true
+    example: light.grp_studio
+    default: light.grp_studio
+    selector:
+      entity:
+        multiple: false
+        filter:
+          domain: light
+  transition:
+    name: Transition Field
+    description: Seconds to take to change light one level to another
+    required: false
+    example: '4'
+    selector:
+      number:
+        min: 0
+        max: 1800
+        step: 0.5
+variables:
+  sensi_var: !input sensi
+  sens_d: '{{ sensi_var / 100 | default( 0.4 ) }}'
+  min_b_var: !input min_b
+  bright_p: "{% set step_size = angle * sens_d %}\n  {# Get brightness as a percent.
+    #}\n{% set cb = (state_attr( light, 'brightness') | float(10) / 255.0) * 100.0
+    %} {% set new_brightness = cb | int(10) + step_size %} {% if new_brightness <
+    5 %}\n  {# If it gets really low set to 0. Adjust if needed for your lights. #}\n
+    \ 0\n{% elif new_brightness <= min_b_var %}\n  {# If it's not quite 0, set to
+    a minimum working brightness. #}\n  {{ min_b_var }}\n{% elif 91 <= new_brightness
+    < (90 + step_size) %}\n  {# If it's almost full brightness, set to 100%. #}\n
+    \ 100\n{% else %}\n  {# Send actual calculated value. #}\n{{ new_brightness }}
+    {% endif %}"
+  trans_i: !input transition_i
+  transition_var: "{% if is_number(transition | default('none')) %}\n  {{ transition
+    }}\n{% elif is_number(trans_i | default('none')) %}\n  {{ trans_i }}\n{% else
+    %}\n  none\n{% endif %}"
+sequence:
+- if:
+  - alias: turn the light & set brightness
+    condition: template
+    value_template: '{{ is_number(transition_var) }}'
+  then:
+  - alias: Transition number IS available
+    action: light.turn_on
+    data:
+      entity_id: '{{ light }}'
+      brightness_pct: '{{ bright_p }}'
+      transition: '{{ transition_var }}'
+  else:
+  - alias: NO transition number available
+    action: light.turn_on
+    data:
+      entity_id: '{{ light }}'
+      brightness_pct: '{{ bright_p }}'
+icon: mdi:lightbulb-on-50
+mode: queued
+max: 10

configuration.yaml

@@ -60,13 +60,13 @@ template:
         device_class: power
         state_class: measurement
         state: >
-          {% set hvac = states.climate | selectattr('entity_id', 'search', 'living_room') | map(attribute='entity_id') | first %}
-          {% if hvac %}
+          {% set hvac = 'climate.living_room_living_room' %}
+          {% if states(hvac) not in ['unknown', 'unavailable'] %}
             {% set action = state_attr(hvac, 'hvac_action') | string | lower %}
             {% if action == 'cooling' %}
               2.12
             {% elif action == 'heating' %}
-              {% if is_state_attr(hvac, 'is_aux_heat', true) %}
+              {% if is_state_attr(hvac, 'preset_mode', 'eco') or is_state_attr(hvac, 'aux_heat', 'on') %}
                 20.5
               {% else %}
                 2.5
@@ -116,9 +116,7 @@ http:
   use_x_forwarded_for: true
   trusted_proxies:
     - 192.168.122.1
-    - 192.168.1.130
-    - 192.168.1.125
-    - 192.168.1.135
+    - 192.168.1.0/24
 
 # Legacy and Integration Sensor Section
 sensor:

custom_components/album_slideshow/__init__.py

@@ -0,0 +1,431 @@
+from __future__ import annotations
+
+import asyncio
+import json
+import logging
+import os
+
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import EVENT_HOMEASSISTANT_STARTED
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers import entity_registry as er
+
+from .const import DOMAIN, SERVICE_NEXT_SLIDE, SERVICE_REFRESH_ALBUM, ATTR_ENTRY_ID
+from .store import SlideshowStore
+
+_LOGGER = logging.getLogger(__name__)
+
+PLATFORMS: list[str] = ["camera", "sensor", "button", "number", "select", "text", "switch"]
+
+CARD_STATIC_PATH = "/album_slideshow_static"
+CARD_FILE = "album-slideshow-card.js"
+
+
+async def _async_register_card(hass: HomeAssistant) -> None:
+    """Serve the Lovelace card JS and register it as a frontend module.
+
+    Idempotent: only the first config entry to load triggers registration
+    for the HA session. The card lets dashboards cross-fade between slides
+    in the browser (GPU compositor) instead of forcing the camera entity
+    to render a JPEG burst on the event loop.
+    """
+    if hass.data.get(DOMAIN, {}).get("card_registered"):
+        return
+
+    integration_dir = os.path.dirname(__file__)
+    www_dir = os.path.join(integration_dir, "www")
+    card_path = os.path.join(www_dir, CARD_FILE)
+
+    if not os.path.isfile(card_path):
+        # Some HACS upgrade paths (and broken zip extractors) drop the
+        # ``www/`` subdirectory. Try to recover by checking whether the
+        # integration root has the file under a literal-backslash name
+        # (a symptom of zips written with Windows path separators) or
+        # directly at the root, and salvage it into ``www/`` so the
+        # rest of the registration can proceed.
+        recovered = await hass.async_add_executor_job(
+            _recover_card_from_root, integration_dir, www_dir, card_path
+        )
+        if not recovered:
+            _LOGGER.warning(
+                "Album Slideshow card missing on disk (%s). Re-install"
+                " the integration via HACS (3-dot menu -> Redownload)"
+                " or copy %s/%s into the album_slideshow folder."
+                " The custom:album-slideshow-card type will not be"
+                " available until this is fixed.",
+                card_path,
+                "www",
+                CARD_FILE,
+            )
+            return
+
+    try:
+        from homeassistant.components.http import StaticPathConfig
+
+        await hass.http.async_register_static_paths(
+            [StaticPathConfig(CARD_STATIC_PATH, www_dir, False)]
+        )
+    except Exception:  # noqa: BLE001 - many possible failure modes here
+        _LOGGER.exception(
+            "Failed to register static path for Album Slideshow card"
+        )
+        return
+
+    # Cache-bust the card URL with the integration version so dashboards
+    # always pick up the script that matches the running integration
+    # rather than a stale copy from a previous release.
+    version = await hass.async_add_executor_job(
+        _read_manifest_version, integration_dir
+    )
+    card_url = f"{CARD_STATIC_PATH}/{CARD_FILE}"
+    if version:
+        card_url = f"{card_url}?v={version}"
+
+    # Prefer registering the card as a Lovelace resource for storage-mode
+    # dashboards. Resources are loaded as part of the Lovelace bootstrap,
+    # before any dashboard renders custom cards, which removes the race
+    # where the dashboard can hit "Custom element doesn't exist" if the
+    # browser hasn't finished loading the module yet (a real risk after
+    # HA restarts and integration upgrades that bust the cache).
+    #
+    # The storage-mode resources collection is only consumed by
+    # storage-mode dashboards; YAML-mode dashboards (whether the user
+    # has ``lovelace.mode: yaml`` globally or per-dashboard
+    # ``mode: yaml`` entries) read only the resources declared in their
+    # own YAML and would otherwise never load the card. That's why we
+    # *always* also call ``add_extra_js_url``: the frontend injects a
+    # ``<script>`` tag on every Lovelace render regardless of mode, so
+    # it's the universal fallback. Module loads are deduplicated by URL
+    # and the card's ``customElements.define()`` calls have an
+    # idempotency guard, so a storage-mode dashboard picking up both
+    # paths is a harmless no-op.
+    resource_registered = await _try_register_lovelace_resource(hass, card_url)
+    if resource_registered:
+        hass.data.setdefault(DOMAIN, {})[
+            "lovelace_resource_registered"
+        ] = True
+
+    try:
+        from homeassistant.components.frontend import add_extra_js_url
+
+        add_extra_js_url(hass, card_url)
+    except Exception:  # noqa: BLE001
+        _LOGGER.exception(
+            "Failed to add Album Slideshow card via add_extra_js_url"
+            " (URL %s); the card may still load if a Lovelace resource"
+            " was registered above.",
+            card_url,
+        )
+
+    hass.data.setdefault(DOMAIN, {})["card_registered"] = True
+    if resource_registered:
+        _LOGGER.info(
+            "Album Slideshow card registered (Lovelace resource +"
+            " add_extra_js_url) at %s",
+            card_url,
+        )
+    else:
+        _LOGGER.info(
+            "Album Slideshow card registered via add_extra_js_url at"
+            " %s; Lovelace resources collection was not available so"
+            " no resource entry was created.",
+            card_url,
+        )
+
+
+async def _try_register_lovelace_resource(
+    hass: HomeAssistant, card_url: str
+) -> bool:
+    """Register the card as a Lovelace resource for storage-mode dashboards.
+
+    Returns ``True`` if the resource was added (or already present at the
+    requested version); ``False`` if Lovelace isn't loaded, the dashboard
+    is in YAML mode, or anything else went wrong - in which case the
+    caller is expected to fall back to ``add_extra_js_url``.
+
+    The resource collection API is internal to HA and has changed shape
+    between versions, so we feel our way through it with ``getattr`` and
+    swallow any unexpected exception. The downside of getting this wrong
+    is one extra script tag in the dashboard, not a crash.
+    """
+    try:
+        lovelace_data = hass.data.get("lovelace")
+        if lovelace_data is None:
+            _LOGGER.debug(
+                "Lovelace data not yet present; cannot register resource"
+            )
+            return False
+
+        # In recent HA the lovelace key is a LovelaceData object exposing
+        # ``resources``; in older versions it was a dict with the same key.
+        if isinstance(lovelace_data, dict):
+            resources = lovelace_data.get("resources")
+        else:
+            resources = getattr(lovelace_data, "resources", None)
+
+        if resources is None or not hasattr(resources, "async_create_item"):
+            # YAML-mode dashboards expose a ResourceYAMLCollection that is
+            # read-only; users edit ``configuration.yaml`` themselves.
+            _LOGGER.debug(
+                "Lovelace resources unavailable or read-only;"
+                " falling back to add_extra_js_url"
+            )
+            return False
+
+        # Make sure the storage collection has loaded its file. Some HA
+        # versions lazy-load on first ``async_items()`` access; calling
+        # ``async_load`` explicitly is safe either way.
+        if hasattr(resources, "async_load"):
+            try:
+                await resources.async_load()
+            except Exception:  # noqa: BLE001
+                # Storage collection may be in an unloaded state with no
+                # file yet - treated the same as "no items".
+                pass
+
+        items = []
+        if hasattr(resources, "async_items"):
+            try:
+                items = list(resources.async_items())
+            except Exception:  # noqa: BLE001
+                items = []
+
+        base = card_url.split("?", 1)[0]
+        same_version_present = False
+        stale_ids: list[str] = []
+        for item in items:
+            if isinstance(item, dict):
+                url = item.get("url", "") or ""
+                item_id = item.get("id")
+            else:
+                url = getattr(item, "url", "") or ""
+                item_id = getattr(item, "id", None)
+            if url.split("?", 1)[0] != base:
+                continue
+            if url == card_url:
+                same_version_present = True
+            elif item_id:
+                stale_ids.append(item_id)
+
+        # Strip stale registrations (older versions of the card pinned via
+        # an out-of-date ``?v=...`` query) so the dashboard doesn't pull
+        # both the new and the old script.
+        for item_id in stale_ids:
+            try:
+                await resources.async_delete_item(item_id)
+            except Exception:  # noqa: BLE001
+                _LOGGER.debug(
+                    "Could not delete stale Lovelace resource id=%s",
+                    item_id,
+                    exc_info=True,
+                )
+
+        if not same_version_present:
+            await resources.async_create_item(
+                {"url": card_url, "res_type": "module"}
+            )
+        return True
+    except Exception:  # noqa: BLE001
+        _LOGGER.debug(
+            "Lovelace resource registration failed; will fall back to"
+            " add_extra_js_url",
+            exc_info=True,
+        )
+        return False
+
+
+def _read_manifest_version(integration_dir: str) -> str | None:
+    try:
+        with open(
+            os.path.join(integration_dir, "manifest.json"),
+            "r",
+            encoding="utf-8",
+        ) as fh:
+            return json.load(fh).get("version")
+    except Exception:  # noqa: BLE001
+        return None
+
+
+def _recover_card_from_root(
+    integration_dir: str, www_dir: str, card_path: str
+) -> bool:
+    """Salvage the card file from a broken extraction.
+
+    PowerShell's ``Compress-Archive`` writes zip entries with backslash
+    separators, which Linux unzip implementations may treat as literal
+    filenames. The resulting layout is::
+
+        custom_components/album_slideshow/www\\album-slideshow-card.js
+
+    instead of the expected ``www/album-slideshow-card.js``. Move it to
+    the right place so subsequent installs don't need a re-download.
+    """
+    candidates = [
+        os.path.join(integration_dir, f"www\\{CARD_FILE}"),
+        os.path.join(integration_dir, CARD_FILE),
+    ]
+    for src in candidates:
+        if os.path.isfile(src):
+            try:
+                os.makedirs(www_dir, exist_ok=True)
+                os.replace(src, card_path)
+                _LOGGER.info(
+                    "Recovered Album Slideshow card from %s", src
+                )
+                return True
+            except OSError:
+                _LOGGER.exception(
+                    "Found candidate card at %s but could not move it"
+                    " to %s",
+                    src,
+                    card_path,
+                )
+                return False
+    return False
+
+
+async def _async_cleanup_legacy_entities(hass: HomeAssistant, entry: ConfigEntry) -> None:
+    registry = er.async_get(hass)
+    # Server-side transitions were tried in earlier 0.7-rc builds and
+    # removed before the first public 0.7 pre-release because the
+    # resource cost on low-end hardware was too high. Drop any leftover
+    # transition entities so users don't see stale disabled rows under
+    # the device.
+    legacy_unique_ids = {
+        f"{entry.entry_id}_max_items",
+        f"{entry.entry_id}_transition",
+        f"{entry.entry_id}_transition_duration_ms",
+        f"{entry.entry_id}_transition_fps",
+    }
+
+    for entity in er.async_entries_for_config_entry(registry, entry.entry_id):
+        if entity.unique_id in legacy_unique_ids:
+            registry.async_remove(entity.entity_id)
+
+
+async def async_setup(hass: HomeAssistant, config: dict) -> bool:
+    """Register the Lovelace card during HA bootstrap.
+
+    Running this in ``async_setup`` (not only in ``async_setup_entry``)
+    registers the card's static path and frontend resource at
+    integration load time, well before any config entry finishes
+    setting up. The earlier the resource is registered, the smaller
+    the window in which a dashboard can render a card before the
+    script's ``customElements.define()`` has run, which is what
+    produces the intermittent "Custom element doesn't exist:
+    album-slideshow-card" errors on slow devices (tablets) that open
+    the dashboard during HA startup.
+
+    We also retry the Lovelace storage-resource registration once HA
+    finishes starting, because ``hass.data['lovelace']`` may not yet
+    be populated when ``async_setup`` runs. The storage-resource path
+    is the only mechanism that *gates* dashboard render on resource
+    load (``add_extra_js_url`` just injects a script tag with no
+    ordering guarantee), so we want it to succeed even if we beat
+    Lovelace to the punch on the first attempt.
+    """
+    hass.data.setdefault(DOMAIN, {})
+    await _async_register_card(hass)
+
+    async def _retry_lovelace_resource(_event) -> None:
+        if hass.data.get(DOMAIN, {}).get("lovelace_resource_registered"):
+            return
+        integration_dir = os.path.dirname(__file__)
+        version = await hass.async_add_executor_job(
+            _read_manifest_version, integration_dir
+        )
+        card_url = f"{CARD_STATIC_PATH}/{CARD_FILE}"
+        if version:
+            card_url = f"{card_url}?v={version}"
+        if await _try_register_lovelace_resource(hass, card_url):
+            hass.data.setdefault(DOMAIN, {})[
+                "lovelace_resource_registered"
+            ] = True
+            _LOGGER.info(
+                "Album Slideshow card registered as Lovelace resource"
+                " on HA started (late retry; Lovelace was not yet"
+                " ready during integration setup)"
+            )
+
+    hass.bus.async_listen_once(
+        EVENT_HOMEASSISTANT_STARTED, _retry_lovelace_resource
+    )
+    return True
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    from .coordinator import AlbumCoordinator
+
+    hass.data.setdefault(DOMAIN, {})
+    # Domain-wide concurrency limit on compose work. Multiple album cameras
+    # share HA's small executor pool; without coordination they can all
+    # decode + render in parallel and saturate the loop. One ticket means
+    # at most one album does PIL work at a time, queueing the rest.
+    if "compose_semaphore" not in hass.data[DOMAIN]:
+        hass.data[DOMAIN]["compose_semaphore"] = asyncio.Semaphore(1)
+
+    # Register the Lovelace card once per HA session. The card runs the
+    # GPU-composited transitions in the browser so the camera entity
+    # itself never has to render a transition burst on the event loop.
+    await _async_register_card(hass)
+
+    await _async_cleanup_legacy_entities(hass, entry)
+
+    store = SlideshowStore()
+    coordinator = AlbumCoordinator(hass, entry, store)
+    await coordinator.async_config_entry_first_refresh()
+
+    hass.data[DOMAIN][entry.entry_id] = {
+        "coordinator": coordinator,
+        "store": store,
+        "camera": None,
+    }
+
+    async def _next_slide(call) -> None:
+        entry_id = call.data.get(ATTR_ENTRY_ID)
+        if not entry_id:
+            return
+        data = hass.data.get(DOMAIN, {}).get(entry_id)
+        if not data:
+            return
+        cam = data.get("camera")
+        if cam:
+            await cam.async_force_next()
+
+    async def _refresh_album(call) -> None:
+        entry_id = call.data.get(ATTR_ENTRY_ID)
+        if not entry_id:
+            return
+        data = hass.data.get(DOMAIN, {}).get(entry_id)
+        if not data:
+            return
+        cam = data.get("camera")
+        if cam:
+            await cam.async_force_refresh()
+
+    if not hass.services.has_service(DOMAIN, SERVICE_NEXT_SLIDE):
+        hass.services.async_register(DOMAIN, SERVICE_NEXT_SLIDE, _next_slide)
+
+    if not hass.services.has_service(DOMAIN, SERVICE_REFRESH_ALBUM):
+        hass.services.async_register(DOMAIN, SERVICE_REFRESH_ALBUM, _refresh_album)
+
+    await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)
+
+    store.notify()
+
+    return True
+
+
+async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    unload_ok = await hass.config_entries.async_unload_platforms(entry, PLATFORMS)
+    if unload_ok:
+        domain_data = hass.data.get(DOMAIN, {})
+        domain_data.pop(entry.entry_id, None)
+        # Drop the shared semaphore once the last album is gone so it's
+        # re-created if the integration is re-added later.
+        entry_keys = [
+            k for k in domain_data.keys() if k != "compose_semaphore"
+        ]
+        if not entry_keys:
+            domain_data.pop("compose_semaphore", None)
+    return unload_ok

custom_components/album_slideshow/button.py

@@ -0,0 +1,68 @@
+from __future__ import annotations
+
+from homeassistant.components.button import ButtonEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+
+from .const import DOMAIN, SERVICE_NEXT_SLIDE, SERVICE_REFRESH_ALBUM, ATTR_ENTRY_ID
+from .coordinator import AlbumCoordinator
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    coordinator: AlbumCoordinator = hass.data[DOMAIN][entry.entry_id]["coordinator"]
+    async_add_entities(
+        [
+            NextSlideButton(hass, entry, coordinator),
+            RefreshAlbumButton(hass, entry, coordinator),
+        ]
+    )
+
+
+class _BaseButton(ButtonEntity):
+    _attr_has_entity_name = True
+
+    def __init__(self, hass: HomeAssistant, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        self.hass = hass
+        self.entry = entry
+        self.coordinator = coordinator
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+
+class NextSlideButton(_BaseButton):
+    def __init__(self, hass: HomeAssistant, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(hass, entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_next_button"
+        self._attr_name = "Next slide"
+        self._attr_icon = "mdi:skip-next"
+
+    async def async_press(self) -> None:
+        await self.hass.services.async_call(
+            DOMAIN,
+            SERVICE_NEXT_SLIDE,
+            {ATTR_ENTRY_ID: self.entry.entry_id},
+            blocking=False,
+        )
+
+
+class RefreshAlbumButton(_BaseButton):
+    def __init__(self, hass: HomeAssistant, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(hass, entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_refresh_button"
+        self._attr_name = "Refresh album"
+        self._attr_icon = "mdi:refresh"
+
+    async def async_press(self) -> None:
+        await self.hass.services.async_call(
+            DOMAIN,
+            SERVICE_REFRESH_ALBUM,
+            {ATTR_ENTRY_ID: self.entry.entry_id},
+            blocking=False,
+        )

custom_components/album_slideshow/camera.py

@@ -0,0 +1,922 @@
+from __future__ import annotations
+
+import asyncio
+from collections import OrderedDict
+import logging
+import random
+from pathlib import Path
+
+import async_timeout
+from PIL import Image
+
+from homeassistant.components.camera import Camera
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.aiohttp_client import async_get_clientsession
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+
+from .const import (
+    DOMAIN,
+    MAX_RESOLUTION_SHORT_EDGE,
+    ORIENTATION_MISMATCH_PAIR,
+    ORIENTATION_MISMATCH_AVOID,
+    ORDER_ALBUM,
+    ORDER_RANDOM,
+    PROVIDER_GOOGLE_SHARED,
+)
+from . import image_processing as ip
+from . import playlist
+from .coordinator import AlbumCoordinator, MediaItem
+from .store import SlideshowStore
+
+_LOGGER = logging.getLogger(__name__)
+
+# Cap a single download at 64 MB. Larger images are rejected before decode
+# to protect low-memory devices. This is well above any realistic camera
+# JPEG; RAW/NEF/etc. aren't supported as camera frames anyway.
+_MAX_DOWNLOAD_BYTES = 64 * 1024 * 1024
+
+# Only these content types are accepted as image bodies. If a server returns
+# HTML (captive portal, 404 page rendered as 200, etc.) we reject it early.
+_ACCEPTED_IMAGE_PREFIX = ("image/",)
+
+# Max candidates we'll scan when searching for a mismatched-orientation
+# pairing partner. Metadata-only checks are nearly free; decode-only checks
+# (no metadata available) are expensive.
+_PAIR_SEARCH_LIMIT = 12
+_SKIP_SEARCH_LIMIT = 30
+
+
+def _ts_to_iso(ts_ms: int | None) -> str | None:
+    """Convert epoch milliseconds to an ISO-8601 string in UTC, or None."""
+    if not isinstance(ts_ms, int):
+        return None
+    from datetime import datetime, timezone
+    try:
+        return datetime.fromtimestamp(ts_ms / 1000, tz=timezone.utc).isoformat()
+    except (OverflowError, OSError, ValueError):
+        return None
+
+
+class _DownloadCache:
+    """Byte-budget LRU cache for downloaded image data, O(1) per operation."""
+
+    def __init__(self, max_bytes: int) -> None:
+        self._cache: "OrderedDict[str, bytes]" = OrderedDict()
+        self._total_bytes: int = 0
+        self._max_bytes: int = max(max_bytes, 1)
+
+    @property
+    def total_bytes(self) -> int:
+        return self._total_bytes
+
+    def get(self, url: str) -> bytes | None:
+        data = self._cache.get(url)
+        if data is None:
+            return None
+        self._cache.move_to_end(url)
+        return data
+
+    def put(self, url: str, data: bytes) -> None:
+        if len(data) > self._max_bytes:
+            # Item exceeds the entire cache budget; skip caching but don't raise.
+            return
+        if url in self._cache:
+            self._total_bytes -= len(self._cache[url])
+            del self._cache[url]
+        self._cache[url] = data
+        self._total_bytes += len(data)
+        self._evict()
+
+    def resize(self, max_bytes: int) -> None:
+        self._max_bytes = max(max_bytes, 1)
+        self._evict()
+
+    def _evict(self) -> None:
+        while self._total_bytes > self._max_bytes and self._cache:
+            _, data = self._cache.popitem(last=False)
+            self._total_bytes -= len(data)
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    coordinator: AlbumCoordinator = hass.data[DOMAIN][entry.entry_id]["coordinator"]
+    store: SlideshowStore = hass.data[DOMAIN][entry.entry_id]["store"]
+
+    cam = AlbumSlideshowCamera(hass, entry, coordinator, store)
+    hass.data[DOMAIN][entry.entry_id]["camera"] = cam
+
+    async_add_entities([cam])
+
+
+class AlbumSlideshowCamera(Camera):
+    _attr_should_poll = False
+
+    def __init__(self, hass: HomeAssistant, entry: ConfigEntry, coordinator: AlbumCoordinator, store: SlideshowStore) -> None:
+        super().__init__()
+        self.hass = hass
+        self.entry = entry
+        self.coordinator = coordinator
+        self.store = store
+
+        self._attr_name = f"Album Slideshow {entry.title}"
+        self._attr_unique_id = f"{entry.entry_id}_camera"
+
+        self._rng = random.Random()
+        self._index = 0
+        self._random_order: list[int] = []
+        self._random_pos = 0
+
+        self._download_cache = _DownloadCache(
+            max_bytes=store.image_cache_mb * 1024 * 1024
+        )
+        self._recent_urls: list[str] = []
+        self._last_is_portrait: bool | None = None
+        # When the current frame is a paired image, this is [taken_a, taken_b]
+        # ISO strings (top/left first); None for single frames.
+        self._last_captured_at_pair: list[str | None] | None = None
+        # Full per-half caption metadata for a paired frame: a list of two
+        # dicts (top/left first) each carrying captured_at / location /
+        # latitude / longitude. None for single frames. Lets the Lovelace
+        # card overlay an accurate caption on each half of a pair.
+        self._last_pair_frames: list[dict] | None = None
+        # ``horizontal`` (side-by-side, left/right) or ``vertical`` (stacked,
+        # top/bottom) for a paired frame; None for single frames.
+        self._last_pair_orientation: str | None = None
+        # Cached effective playlist (after date filter + ordering). Invalidated
+        # by any store change or coordinator update.
+        self._effective_cache: tuple[int, list[MediaItem]] | None = None
+
+        self._framebuffer: bytes | None = None
+
+        # MJPEG subscribers. Each open stream owns an asyncio.Queue of JPEG
+        # byte payloads. The render loop pushes the latest still as soon
+        # as it's encoded; if a subscriber falls behind we drop frames
+        # for that subscriber rather than block the whole loop.
+        self._mjpeg_subscribers: set[asyncio.Queue[bytes]] = set()
+
+        # Monotonic counter incremented every time a new still is committed.
+        # Exposed as the ``frame_id`` state attribute so the Lovelace card
+        # has an unambiguous "new frame ready" signal even when other
+        # attributes happen not to change between slides.
+        self._frame_id: int = 0
+
+        self._interrupt_event: asyncio.Event = asyncio.Event()
+        self._force_next: bool = False
+        self._consecutive_failures: int = 0
+        self._render_task: asyncio.Task | None = None
+
+        def _on_coordinator_update() -> None:
+            self._effective_cache = None
+            self._interrupt_event.set()
+            self.async_write_ha_state()
+
+        coordinator.async_add_listener(_on_coordinator_update)
+
+        def _on_store_change() -> None:
+            self._download_cache.resize(self.store.image_cache_mb * 1024 * 1024)
+            self._effective_cache = None
+            self._interrupt_event.set()
+            self.async_write_ha_state()
+
+        store.add_listener(_on_store_change)
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        # Restore last framebuffer (if the store kept one) so the camera has
+        # something to show immediately after a restart, rather than a broken
+        # image placeholder while the first render completes.
+        restored = getattr(self.store, "last_frame", None)
+        if isinstance(restored, (bytes, bytearray)) and restored:
+            self._framebuffer = bytes(restored)
+        # Stagger the first render across multiple albums so they don't all
+        # decode + encode at the same instant on HA startup. Deterministic
+        # offset based on entry_id keeps the pattern stable across
+        # restarts. Up to ~3 s spread across albums.
+        startup_delay = (hash(self.entry.entry_id) % 3000) / 1000.0
+        self._render_task = self.hass.async_create_background_task(
+            self._render_loop(initial_delay=startup_delay),
+            name="album_slideshow_render_loop",
+        )
+
+    async def async_will_remove_from_hass(self) -> None:
+        if self._render_task is not None:
+            self._render_task.cancel()
+            try:
+                await self._render_task
+            except asyncio.CancelledError:
+                pass
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+    @property
+    def icon(self) -> str:
+        if self.coordinator.provider == PROVIDER_GOOGLE_SHARED:
+            return "mdi:google-photos"
+        return "mdi:folder-multiple-image"
+
+    @property
+    def extra_state_attributes(self):
+        data = self.coordinator.data or {}
+        items: list[MediaItem] = self._effective_items()
+        cur = items[self._index] if items and 0 <= self._index < len(items) else None
+        captured_at = _ts_to_iso(getattr(cur, "captured_at", None))
+        captured_at_pair = self._last_captured_at_pair
+        return {
+            "album_title": data.get("title"),
+            "media_count": len(items),
+            "media_count_total": len(data.get("items", []) or []),
+            "current_index": self._index,
+            "current_filename": getattr(cur, "filename", None),
+            "current_url": getattr(cur, "url", None),
+            "current_is_portrait": self._last_is_portrait,
+            "captured_at": captured_at_pair if captured_at_pair else captured_at,
+            "captured_at_primary": captured_at,
+            "uploaded_at": _ts_to_iso(getattr(cur, "uploaded_at", None)),
+            "byte_size": getattr(cur, "byte_size", None),
+            # GPS + reverse-geocoded label come from EXIF for local-folder
+            # entries; Google albums leave these as ``None``.
+            "latitude": getattr(cur, "latitude", None),
+            "longitude": getattr(cur, "longitude", None),
+            "location": getattr(cur, "location", None),
+            # Structured per-image caption metadata. A single-element list for
+            # normal slides; two elements (top/left first) for paired slides,
+            # so the card can overlay an accurate date/location on each half.
+            # ``pair_orientation`` tells the card how the two halves are laid
+            # out: ``horizontal`` (left/right) or ``vertical`` (top/bottom).
+            "caption_frames": self._caption_frames(cur, captured_at),
+            "pair_orientation": self._last_pair_orientation,
+            "slide_interval": int(self.store.slide_interval),
+            "fill_mode": self.store.fill_mode,
+            "portrait_mode": self.store.portrait_mode,
+            "order_mode": self.store.order_mode,
+            "date_filter": self.store.date_filter,
+            "paused": bool(self.store.paused),
+            "refresh_hours": int(self.store.refresh_hours),
+            "aspect_ratio": self.store.aspect_ratio,
+            "pair_divider_px": int(self.store.pair_divider_px),
+            "pair_divider_color": self.store.pair_divider_color,
+            "frame_id": self._frame_id,
+            "pagination_debug": data.get("pagination_debug"),
+        }
+
+    def _caption_frames(self, cur, captured_at: str | None) -> list[dict]:
+        """Per-image caption metadata for the current slide.
+
+        Returns a list with one dict for a normal slide, or two (top/left
+        first) for a paired slide. Each dict carries ``captured_at`` (ISO
+        string or ``None``), ``location`` (human label or ``None``), and
+        ``latitude`` / ``longitude``. The card reads this to overlay an
+        accurate caption on each image, including each half of a pair.
+        """
+        if self._last_pair_frames:
+            return self._last_pair_frames
+        return [
+            {
+                "captured_at": captured_at,
+                "location": getattr(cur, "location", None),
+                "latitude": getattr(cur, "latitude", None),
+                "longitude": getattr(cur, "longitude", None),
+            }
+        ]
+
+    @property
+    def entity_picture(self) -> str | None:
+        """Return the camera proxy URL with a per-frame cache-buster.
+
+        HA core's default ``entity_picture`` only changes when the access
+        token rotates (about every five minutes). Browsers happily serve
+        the cached image to the more-info dialog and other surfaces in
+        between rotations, so they end up showing the previous slide
+        while a fresh slide is already in the framebuffer. Appending the
+        ``frame_id`` invalidates that cache as soon as a new slide is
+        committed, no matter where in HA the picture is rendered.
+        """
+        base = super().entity_picture
+        if not base:
+            return base
+        sep = "&" if "?" in base else "?"
+        return f"{base}{sep}frame={self._frame_id}"
+
+    @property
+    def cache_usage_mb(self) -> float:
+        return round(self._download_cache.total_bytes / (1024 * 1024), 1)
+
+    def _effective_items(self) -> list[MediaItem]:
+        """Return the playlist after applying the date filter and order mode.
+
+        Cached until the coordinator or store changes (see invalidations
+        wired up in __init__).
+        """
+        data = self.coordinator.data or {}
+        raw: list[MediaItem] = data.get("items", []) or []
+        cache_key = (
+            id(raw),
+            self.store.date_filter,
+            self.store.order_mode,
+        )
+        if self._effective_cache is not None and self._effective_cache[0] == hash(cache_key):
+            return self._effective_cache[1]
+
+        filtered = playlist.filter_items(
+            raw,
+            mode=self.store.date_filter,
+        )
+        ordered = playlist.order_items(filtered, self.store.order_mode)
+        self._effective_cache = (hash(cache_key), ordered)
+        return ordered
+
+    async def async_force_next(self) -> None:
+        self._force_next = True
+        self._interrupt_event.set()
+        self.async_write_ha_state()
+
+    async def async_force_refresh(self) -> None:
+        await self.coordinator.async_request_refresh()
+
+    async def async_camera_image(self, width: int | None = None, height: int | None = None) -> bytes | None:
+        return self._framebuffer
+
+    async def handle_async_mjpeg_stream(self, request):
+        """Stream the slideshow as multipart MJPEG.
+
+        Each open client gets a bounded asyncio.Queue that the render loop
+        pushes JPEG payloads into when a new still is committed. Visible
+        transitions are now handled by the Lovelace card on the client
+        side, so this stream just emits the latest still per slide change.
+        """
+        # Imported lazily so the module still loads in test environments
+        # that stub out homeassistant without installing aiohttp.
+        from aiohttp import web
+
+        boundary = "frame"
+        response = web.StreamResponse(
+            status=200,
+            reason="OK",
+            headers={
+                "Content-Type": f"multipart/x-mixed-replace;boundary={boundary}",
+                "Cache-Control": "no-cache, private",
+                "Pragma": "no-cache",
+            },
+        )
+        await response.prepare(request)
+
+        # Bounded queue: a slow client should fall behind on slide commits
+        # rather than balloon memory.
+        queue: asyncio.Queue[bytes] = asyncio.Queue(maxsize=4)
+        self._mjpeg_subscribers.add(queue)
+
+        # Push the held still immediately so the client renders something
+        # before the next slide change.
+        if self._framebuffer is not None:
+            try:
+                queue.put_nowait(self._framebuffer)
+            except asyncio.QueueFull:
+                pass
+
+        try:
+            while True:
+                payload = await queue.get()
+                try:
+                    await response.write(
+                        b"--" + boundary.encode() + b"\r\n"
+                        b"Content-Type: image/jpeg\r\n"
+                        b"Content-Length: " + str(len(payload)).encode() + b"\r\n\r\n"
+                        + payload + b"\r\n"
+                    )
+                except (ConnectionResetError, asyncio.CancelledError):
+                    raise
+                except Exception as err:
+                    _LOGGER.debug("Album Slideshow: mjpeg client write failed: %s", err)
+                    break
+        except (ConnectionResetError, asyncio.CancelledError):
+            pass
+        finally:
+            self._mjpeg_subscribers.discard(queue)
+            try:
+                await response.write_eof()
+            except Exception:
+                pass
+
+        return response
+
+    # Older HA cores may dispatch via the alt name; alias for compatibility.
+    async def async_handle_async_mjpeg_stream(self, request):
+        return await self.handle_async_mjpeg_stream(request)
+
+    async def _wait_or_interrupt(self, timeout: float) -> bool:
+        """Wait up to ``timeout`` seconds, returning True if interrupted.
+
+        Safe wrapper around clear() + wait_for() - callers don't have to
+        worry about the ordering of the two operations. The clear() runs
+        synchronously before the awaitable is created, so no interrupt can
+        be lost on the single-threaded event loop.
+        """
+        self._interrupt_event.clear()
+        try:
+            await asyncio.wait_for(self._interrupt_event.wait(), timeout=timeout)
+            return True
+        except asyncio.TimeoutError:
+            return False
+
+    async def _render_loop(self, initial_delay: float = 0.0) -> None:
+        """Background task: render slides into _framebuffer, advance on timer or interrupt."""
+        if initial_delay > 0:
+            try:
+                await asyncio.sleep(initial_delay)
+            except asyncio.CancelledError:
+                raise
+        should_advance = False  # Don't advance on the very first render
+        while True:
+            try:
+                await self._render_cycle(advance=should_advance)
+                self._consecutive_failures = 0
+            except asyncio.CancelledError:
+                raise
+            except Exception as err:
+                self._consecutive_failures += 1
+                backoff = min(2 ** self._consecutive_failures, 60)
+                _LOGGER.warning(
+                    "Album Slideshow: render cycle failed (attempt %d), retrying in %ds: %s",
+                    self._consecutive_failures, backoff, err,
+                )
+                try:
+                    await asyncio.sleep(backoff)
+                except asyncio.CancelledError:
+                    raise
+                should_advance = True  # Skip the broken image on retry
+                continue
+
+            interrupted = await self._wait_or_interrupt(float(int(self.store.slide_interval)))
+            if interrupted:
+                should_advance = self._force_next
+                self._force_next = False
+            else:
+                # Paused slideshows hold the current frame until the user
+                # un-pauses or hits "next slide" explicitly.
+                should_advance = not bool(self.store.paused)
+
+    async def _render_cycle(self, advance: bool) -> None:
+        """Render one frame.
+
+        The slideshow is just "advance index, compose, encode, broadcast".
+        Visible transitions are handled by the Lovelace card client-side,
+        so this path stays minimal: at most one PIL decode + encode per
+        slide change.
+
+        Compose work is serialised across all albums via a domain-wide
+        semaphore so 4 cameras don't all decode + encode at once.
+        """
+        items: list[MediaItem] = self._effective_items()
+        if not items:
+            return
+
+        count = len(items)
+        if advance:
+            self._do_advance(count, items)
+
+        async with self._compose_semaphore:
+            composed, meta = await self._compose_for_index(items)
+            if composed is None:
+                return
+            try:
+                await self._commit_composed(composed, meta)
+            finally:
+                ip.safe_close(composed)
+
+    async def _commit_composed(self, composed: Image.Image, meta: dict) -> None:
+        """Encode the composed slide into the framebuffer and broadcast.
+
+        Encodes off the loop so the JPEG encode (30-80 ms at 1080p, more
+        at 4K) doesn't block HA.
+        """
+        encoded = await self.hass.async_add_executor_job(
+            ip.encode_image, composed
+        )
+
+        self._framebuffer = encoded
+        self.store.last_frame = encoded
+        self._frame_id += 1
+        if meta:
+            self._last_is_portrait = meta.get("is_portrait")
+        else:
+            self._last_is_portrait = None
+        self._last_captured_at_pair = meta.get("captured_at_pair") if meta else None
+        self._last_pair_frames = meta.get("pair_frames") if meta else None
+        self._last_pair_orientation = meta.get("pair_orientation") if meta else None
+
+        self._broadcast_frame(encoded)
+        self.async_write_ha_state()
+
+    @property
+    def _compose_semaphore(self) -> asyncio.Semaphore:
+        """Return the domain-wide compose semaphore, creating it on demand.
+
+        ``__init__.py`` populates it during setup, but defensive
+        initialisation here means a partially-loaded integration can
+        still render without crashing.
+        """
+        domain_data = self.hass.data.setdefault(DOMAIN, {})
+        sem = domain_data.get("compose_semaphore")
+        if sem is None:
+            sem = asyncio.Semaphore(1)
+            domain_data["compose_semaphore"] = sem
+        return sem
+
+    def _broadcast_frame(self, payload: bytes) -> None:
+        """Push a frame to every active MJPEG subscriber.
+
+        Slow subscribers get their frame dropped rather than backing up the
+        queue; the next still emission will catch them up.
+        """
+        for queue in list(self._mjpeg_subscribers):
+            try:
+                queue.put_nowait(payload)
+            except asyncio.QueueFull:
+                # Drain one and retry once so a wedged client still sees
+                # the latest frame eventually instead of forever stale.
+                try:
+                    queue.get_nowait()
+                except asyncio.QueueEmpty:
+                    pass
+                try:
+                    queue.put_nowait(payload)
+                except asyncio.QueueFull:
+                    pass
+
+    def _do_advance(self, count: int, items: list) -> None:
+        """Advance _index to the next slide and commit random-order position."""
+        if count <= 0:
+            self._index = 0
+            return
+
+        self._index %= count
+        order_mode = self.store.order_mode
+
+        # Sequential modes (album order + sorted-by-time orderings) walk in
+        # order. The list is already pre-sorted by ``order_items``, so we
+        # only need to step forward.
+        if order_mode != ORDER_RANDOM:
+            self._index = (self._index + 1) % count
+            return
+
+        self._index = self._next_random_index(count)
+        cur_url = items[self._index].url
+        self._recent_urls.append(cur_url)
+        keep = min(20, max(1, count - 1))
+        if len(self._recent_urls) > keep:
+            self._recent_urls = self._recent_urls[-keep:]
+
+    def _peek_advance(self, count: int, items: list) -> None:
+        """Advance _index without committing to random-order bookkeeping.
+
+        Used by the orientation-avoid search so that rejected candidates
+        don't burn through the random cycle and cause premature repeats.
+        """
+        if count <= 0:
+            self._index = 0
+            return
+        self._index = (self._index + 1) % count
+
+    async def _compose_for_index(
+        self, items: list[MediaItem]
+    ) -> tuple[Image.Image | None, dict | None]:
+        """Compose the slide at ``self._index`` into a PIL image.
+
+        Returns ``(composed, meta)`` where ``meta`` carries the orientation
+        and paired-capture metadata that ``_commit_composed`` will publish
+        as state attributes. Returns ``(None, None)`` if compose failed.
+
+        Pure compose - does NOT mutate ``self._framebuffer`` or
+        ``self._last_*`` state. The caller commits via ``_commit_composed``.
+        """
+        fill_mode = self.store.fill_mode
+        portrait_mode = self.store.portrait_mode
+        divider = max(0, int(self.store.pair_divider_px))
+        divider_fill, transparent_divider = ip.parse_divider_color(self.store.pair_divider_color)
+        max_short_edge = MAX_RESOLUTION_SHORT_EDGE.get(self.store.max_resolution)
+        width, height = ip.resolve_output_size(None, None, self.store.aspect_ratio, max_short_edge)
+
+        cur = items[self._index]
+        is_portrait_canvas = height > width
+
+        # Metadata fast path: if we can resolve orientation without downloading,
+        # we may short-circuit the mismatch handling before any bytes are read.
+        meta_portrait = ip.is_portrait_item_by_metadata(cur)
+        if (
+            meta_portrait is not None
+            and meta_portrait != is_portrait_canvas
+            and portrait_mode == ORIENTATION_MISMATCH_AVOID
+        ):
+            return await self._compose_skip_mismatch(items, width, height, fill_mode, is_portrait_canvas)
+
+        cur_bytes = await self._fetch_bytes(cur.url)
+        if not cur_bytes:
+            raise RuntimeError(f"Failed to fetch image: {cur.url}")
+
+        img = await self.hass.async_add_executor_job(
+            ip.open_image, cur_bytes, (width, height)
+        )
+        try:
+            cur_is_portrait = ip.is_portrait_item(cur, img)
+            orientation_mismatch = cur_is_portrait != is_portrait_canvas
+
+            if orientation_mismatch and portrait_mode == ORIENTATION_MISMATCH_AVOID:
+                ip.safe_close(img)
+                img = None
+                return await self._compose_skip_mismatch(items, width, height, fill_mode, is_portrait_canvas)
+
+            if orientation_mismatch and portrait_mode == ORIENTATION_MISMATCH_PAIR:
+                pair = await self._find_next_mismatch_image(
+                    items, is_portrait_canvas, width, height, limit=_PAIR_SEARCH_LIMIT
+                )
+                other_img = pair[0] if pair else None
+                other_item = pair[1] if pair else None
+                pair_meta: list[str | None] | None = None
+                pair_frames: list[dict] | None = None
+                try:
+                    if other_img is not None:
+                        composed = await self.hass.async_add_executor_job(
+                            ip.pair_images, img, other_img, width, height, fill_mode,
+                            is_portrait_canvas, divider, divider_fill, transparent_divider,
+                        )
+                        pair_frames = [
+                            {
+                                "captured_at": _ts_to_iso(getattr(cur, "captured_at", None)),
+                                "location": getattr(cur, "location", None),
+                                "latitude": getattr(cur, "latitude", None),
+                                "longitude": getattr(cur, "longitude", None),
+                            },
+                            {
+                                "captured_at": _ts_to_iso(getattr(other_item, "captured_at", None)),
+                                "location": getattr(other_item, "location", None),
+                                "latitude": getattr(other_item, "latitude", None),
+                                "longitude": getattr(other_item, "longitude", None),
+                            },
+                        ]
+                        pair_meta = [f["captured_at"] for f in pair_frames]
+                    else:
+                        composed = await self.hass.async_add_executor_job(
+                            ip.render_image, img, fill_mode, width, height,
+                        )
+                finally:
+                    ip.safe_close(other_img)
+                meta = {
+                    "is_portrait": cur_is_portrait,
+                    "captured_at_pair": pair_meta,
+                    "pair_frames": pair_frames,
+                    # ``pair_images`` stacks images top/bottom on a portrait
+                    # canvas and places them left/right on a landscape canvas.
+                    "pair_orientation": (
+                        ("vertical" if is_portrait_canvas else "horizontal")
+                        if pair_frames
+                        else None
+                    ),
+                }
+                return composed, meta
+
+            composed = await self.hass.async_add_executor_job(
+                ip.render_image, img, fill_mode, width, height
+            )
+            return composed, {
+                "is_portrait": cur_is_portrait,
+                "captured_at_pair": None,
+            }
+        finally:
+            ip.safe_close(img)
+
+    async def _compose_skip_mismatch(
+        self,
+        items: list[MediaItem],
+        width: int,
+        height: int,
+        fill_mode: str,
+        is_portrait_canvas: bool,
+    ) -> tuple[Image.Image | None, dict | None]:
+        """Skip-mismatch variant of ``_compose_for_index``.
+
+        Walks forward (peek-advancing for non-matches) until it finds an
+        image whose orientation matches the canvas, then composes it.
+        """
+        count = len(items)
+        if count <= 0:
+            return None, None
+
+        start = self._index
+
+        for _ in range(min(count, _SKIP_SEARCH_LIMIT)):
+            cur = items[self._index]
+
+            meta_portrait = ip.is_portrait_item_by_metadata(cur)
+            if meta_portrait is not None:
+                if meta_portrait != is_portrait_canvas:
+                    self._peek_advance(count, items)
+                    continue
+                if self._index != start:
+                    self._do_advance(count, items)
+                return await self._compose_single(cur, width, height, fill_mode)
+
+            b = await self._fetch_bytes(cur.url)
+            if not b:
+                self._peek_advance(count, items)
+                continue
+            img = await self.hass.async_add_executor_job(ip.open_image, b, (width, height))
+            try:
+                if ip.is_portrait_item(cur, img) != is_portrait_canvas:
+                    self._peek_advance(count, items)
+                    continue
+                if self._index != start:
+                    self._do_advance(count, items)
+                composed = await self.hass.async_add_executor_job(
+                    ip.render_image, img, fill_mode, width, height
+                )
+                return composed, {
+                    "is_portrait": is_portrait_canvas,
+                    "captured_at_pair": None,
+                }
+            finally:
+                ip.safe_close(img)
+
+        self._index = start
+        return await self._compose_single(items[self._index], width, height, fill_mode)
+
+    async def _compose_single(
+        self,
+        item: MediaItem,
+        width: int,
+        height: int,
+        fill_mode: str,
+    ) -> tuple[Image.Image | None, dict | None]:
+        b = await self._fetch_bytes(item.url)
+        if not b:
+            return None, None
+        img = await self.hass.async_add_executor_job(ip.open_image, b, (width, height))
+        try:
+            cur_is_portrait = ip.is_portrait_item(item, img)
+            composed = await self.hass.async_add_executor_job(
+                ip.render_image, img, fill_mode, width, height
+            )
+            return composed, {
+                "is_portrait": cur_is_portrait,
+                "captured_at_pair": None,
+            }
+        finally:
+            ip.safe_close(img)
+
+    async def _render_current(self, items: list[MediaItem]) -> bytes | None:
+        """Compatibility wrapper: compose + encode the current slide.
+
+        Kept as a thin wrapper because external code paths (e.g., tests)
+        may still call it. ``_render_cycle`` no longer does.
+        """
+        composed, _ = await self._compose_for_index(items)
+        if composed is None:
+            return None
+        try:
+            return await self.hass.async_add_executor_job(ip.encode_image, composed)
+        finally:
+            ip.safe_close(composed)
+
+    async def _find_next_mismatch_image(
+        self,
+        items: list[MediaItem],
+        is_portrait_canvas: bool,
+        width: int,
+        height: int,
+        limit: int = _PAIR_SEARCH_LIMIT,
+    ) -> tuple[Image.Image, MediaItem] | None:
+        """Find an image with the opposite orientation of the canvas.
+
+        Uses metadata wherever possible - only candidates without width/height
+        metadata are downloaded and decoded for their orientation. The returned
+        PIL image is the caller's to close. The matching ``MediaItem`` is
+        returned alongside so the caller can attribute timestamps etc.
+        """
+        if not items:
+            return None
+        n = len(items)
+        tries = 0
+        offset = 1
+        while tries < limit and offset < n:
+            idx = (self._index + offset) % n
+            it = items[idx]
+            offset += 1
+            tries += 1
+
+            if it.url in self._recent_urls:
+                continue
+
+            meta_portrait = ip.is_portrait_item_by_metadata(it)
+            if meta_portrait is not None and meta_portrait == is_portrait_canvas:
+                # Metadata says this one is the wrong orientation for pairing; skip.
+                continue
+
+            b = await self._fetch_bytes(it.url)
+            if not b:
+                continue
+
+            try:
+                img = await self.hass.async_add_executor_job(ip.open_image, b, (width, height))
+            except Exception:
+                continue
+
+            if ip.is_portrait_item(it, img) != is_portrait_canvas:
+                return img, it
+            ip.safe_close(img)
+
+        return None
+
+    def _next_random_index(self, count: int) -> int:
+        if count <= 1:
+            self._random_order = [0]
+            self._random_pos = 0
+            return 0
+
+        needs_new_cycle = len(self._random_order) != count or self._random_pos >= len(self._random_order)
+        if needs_new_cycle:
+            self._random_order = list(range(count))
+            self._rng.shuffle(self._random_order)
+            self._random_pos = 0
+
+            if self._random_order and self._random_order[0] == self._index:
+                self._random_order.append(self._random_order.pop(0))
+
+        idx = self._random_order[self._random_pos]
+        self._random_pos += 1
+        return idx
+
+    async def _fetch_bytes(self, url: str) -> bytes | None:
+        cached = self._download_cache.get(url)
+        if cached is not None:
+            return cached
+
+        if url.startswith("file://"):
+            try:
+                p = Path(url[7:])
+                data = await self.hass.async_add_executor_job(p.read_bytes)
+            except Exception as err:
+                _LOGGER.warning("Album Slideshow: failed to read local image: %s", err)
+                return None
+            if len(data) > _MAX_DOWNLOAD_BYTES:
+                _LOGGER.warning(
+                    "Album Slideshow: local image %s is %d bytes, exceeds %d byte limit; skipping",
+                    url, len(data), _MAX_DOWNLOAD_BYTES,
+                )
+                return None
+        else:
+            data = await self._http_get(url)
+            if data is None:
+                return None
+
+        self._download_cache.put(url, data)
+        return data
+
+    async def _http_get(self, url: str) -> bytes | None:
+        session = async_get_clientsession(self.hass)
+        try:
+            async with async_timeout.timeout(30):
+                async with session.get(url) as resp:
+                    resp.raise_for_status()
+
+                    content_type = resp.headers.get("Content-Type", "")
+                    primary = content_type.split(";", 1)[0].strip().lower()
+                    if primary and not primary.startswith(_ACCEPTED_IMAGE_PREFIX):
+                        _LOGGER.debug(
+                            "Album Slideshow: rejecting %s, content-type %r is not an image",
+                            url, primary,
+                        )
+                        return None
+
+                    content_length = resp.headers.get("Content-Length")
+                    if content_length is not None:
+                        try:
+                            declared = int(content_length)
+                        except ValueError:
+                            declared = -1
+                        if declared > _MAX_DOWNLOAD_BYTES:
+                            _LOGGER.warning(
+                                "Album Slideshow: %s advertises %d bytes, exceeds %d byte limit; skipping",
+                                url, declared, _MAX_DOWNLOAD_BYTES,
+                            )
+                            return None
+
+                    chunks: list[bytes] = []
+                    total = 0
+                    async for chunk in resp.content.iter_chunked(64 * 1024):
+                        total += len(chunk)
+                        if total > _MAX_DOWNLOAD_BYTES:
+                            _LOGGER.warning(
+                                "Album Slideshow: %s exceeded %d byte limit mid-download; aborting",
+                                url, _MAX_DOWNLOAD_BYTES,
+                            )
+                            return None
+                        chunks.append(chunk)
+                    return b"".join(chunks)
+        except Exception as err:
+            _LOGGER.warning("Album Slideshow: failed to fetch image: %s", err)
+            return None

custom_components/album_slideshow/config_flow.py

@@ -0,0 +1,194 @@
+from __future__ import annotations
+
+import re
+from typing import Any
+
+import voluptuous as vol
+from homeassistant import config_entries
+from homeassistant.core import callback
+from homeassistant.data_entry_flow import FlowResult
+
+from .const import (
+    DOMAIN,
+    CONF_PROVIDER,
+    CONF_ALBUM_NAME,
+    CONF_ALBUM_URL,
+    CONF_LOCAL_PATH,
+    CONF_RECURSIVE,
+    CONF_REVERSE_GEOCODE,
+    DEFAULT_REVERSE_GEOCODE,
+    PROVIDER_GOOGLE_SHARED,
+    PROVIDER_LOCAL_FOLDER,
+    DEFAULT_RECURSIVE,
+)
+
+
+def _normalize_local_path(hass, path: str) -> str:
+    p = path.strip()
+    if p.startswith("/local/"):
+        p = "/config/www/" + p[len("/local/"):]
+    elif p == "/local":
+        p = "/config/www"
+    elif p.startswith("local/"):
+        p = "/config/www/" + p[len("local/"):]
+    elif p.startswith("/media/local/"):
+        p = "/media/" + p[len("/media/local/"):]
+    elif p.startswith("media/local/"):
+        p = "/media/" + p[len("media/local/"):]
+    elif p.startswith("media/"):
+        p = "/media/" + p[len("media/"):]
+    elif p == "media":
+        p = "/media"
+    if not p.startswith("/"):
+        p = hass.config.path(p)
+    return p
+
+
+ALBUM_URL_RE = re.compile(r"^https?://photos\.app\.goo\.gl/[^/]+/?$")
+
+
+class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
+    VERSION = 1
+
+    def __init__(self) -> None:
+        self._provider: str | None = None
+
+    @staticmethod
+    @callback
+    def async_get_options_flow(
+        config_entry: config_entries.ConfigEntry,
+    ) -> config_entries.OptionsFlow:
+        """Return the options flow handler.
+
+        Only local-folder entries expose user-tunable options today (the
+        reverse-geocode toggle); Google entries get a no-op handler so
+        that the "Configure" button doesn't appear empty in the UI.
+
+        Note: do NOT pass ``config_entry`` to the OptionsFlow constructor.
+        Since Home Assistant 2024.12 the base class manages
+        ``self.config_entry`` as a property and assigning to it in
+        ``__init__`` raises (the symptom is a 500 when the user clicks
+        Configure).
+        """
+        if config_entry.data.get(CONF_PROVIDER) == PROVIDER_LOCAL_FOLDER:
+            return LocalFolderOptionsFlow()
+        return _NoOptionsFlow()
+
+    async def async_step_user(self, user_input: dict[str, Any] | None = None) -> FlowResult:
+        if user_input is not None:
+            self._provider = user_input[CONF_PROVIDER]
+            if self._provider == PROVIDER_LOCAL_FOLDER:
+                return await self.async_step_local_folder()
+            return await self.async_step_google_shared()
+
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_PROVIDER, default=PROVIDER_GOOGLE_SHARED): vol.In({
+                    PROVIDER_GOOGLE_SHARED: "Google Photos",
+                    PROVIDER_LOCAL_FOLDER: "Local Folder",
+                })
+            }
+        )
+        return self.async_show_form(step_id="user", data_schema=schema)
+
+    async def async_step_google_shared(self, user_input: dict[str, Any] | None = None) -> FlowResult:
+        errors: dict[str, str] = {}
+
+        if user_input is not None:
+            url = user_input[CONF_ALBUM_URL].strip()
+            name = user_input[CONF_ALBUM_NAME].strip()
+
+            if not ALBUM_URL_RE.match(url):
+                errors[CONF_ALBUM_URL] = "invalid_album_url"
+            else:
+                await self.async_set_unique_id(f"{DOMAIN}:{PROVIDER_GOOGLE_SHARED}:{url}")
+                self._abort_if_unique_id_configured()
+                return self.async_create_entry(
+                    title=name,
+                    data={
+                        CONF_PROVIDER: PROVIDER_GOOGLE_SHARED,
+                        CONF_ALBUM_URL: url,
+                        CONF_ALBUM_NAME: name,
+                    },
+                )
+
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_ALBUM_NAME): str,
+                vol.Required(CONF_ALBUM_URL): str,
+            }
+        )
+        return self.async_show_form(step_id="google_shared", data_schema=schema, errors=errors)
+
+    async def async_step_local_folder(self, user_input: dict[str, Any] | None = None) -> FlowResult:
+        errors: dict[str, str] = {}
+
+        if user_input is not None:
+            path = _normalize_local_path(self.hass, user_input[CONF_LOCAL_PATH])
+            name = user_input[CONF_ALBUM_NAME].strip()
+            recursive = bool(user_input.get(CONF_RECURSIVE, DEFAULT_RECURSIVE))
+
+            if not path:
+                errors[CONF_LOCAL_PATH] = "invalid_path"
+            else:
+                await self.async_set_unique_id(f"{DOMAIN}:{PROVIDER_LOCAL_FOLDER}:{path}")
+                self._abort_if_unique_id_configured()
+                return self.async_create_entry(
+                    title=name,
+                    data={
+                        CONF_PROVIDER: PROVIDER_LOCAL_FOLDER,
+                        CONF_LOCAL_PATH: path,
+                        CONF_RECURSIVE: recursive,
+                        CONF_ALBUM_NAME: name,
+                    },
+                )
+
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_ALBUM_NAME): str,
+                vol.Required(CONF_LOCAL_PATH): str,
+                vol.Optional(CONF_RECURSIVE, default=DEFAULT_RECURSIVE): bool,
+            }
+        )
+        return self.async_show_form(step_id="local_folder", data_schema=schema, errors=errors)
+
+
+class LocalFolderOptionsFlow(config_entries.OptionsFlow):
+    """Options for local-folder entries.
+
+    Currently exposes a single toggle: ``reverse_geocode``. Users with
+    privacy concerns about handing EXIF GPS coordinates to an external
+    OSM endpoint can turn this off; the GPS coordinates remain available
+    as ``latitude``/``longitude`` attributes regardless.
+
+    ``self.config_entry`` is provided by ``OptionsFlow`` as a managed
+    property (HA 2024.12+); we deliberately do NOT define ``__init__``
+    or assign to it, since doing so raises in newer cores.
+    """
+
+    async def async_step_init(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        if user_input is not None:
+            return self.async_create_entry(title="", data=user_input)
+
+        current = self.config_entry.options.get(
+            CONF_REVERSE_GEOCODE, DEFAULT_REVERSE_GEOCODE
+        )
+        schema = vol.Schema(
+            {
+                vol.Required(
+                    CONF_REVERSE_GEOCODE, default=bool(current)
+                ): bool,
+            }
+        )
+        return self.async_show_form(step_id="init", data_schema=schema)
+
+
+class _NoOptionsFlow(config_entries.OptionsFlow):
+    """Fallback options flow for providers that expose nothing tunable."""
+
+    async def async_step_init(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        return self.async_create_entry(title="", data={})

custom_components/album_slideshow/const.py

@@ -0,0 +1,94 @@
+DOMAIN = "album_slideshow"
+
+CONF_PROVIDER = "provider"
+CONF_ALBUM_URL = "album_url"
+CONF_ALBUM_NAME = "album_name"
+CONF_LOCAL_PATH = "local_path"
+CONF_RECURSIVE = "recursive"
+CONF_IMAGE_CACHE_MB = "image_cache_mb"
+# Local-folder option: when True (default) the coordinator does best-effort
+# reverse geocoding of EXIF GPS coordinates via the public Nominatim
+# (OpenStreetMap) endpoint and exposes a human-readable ``location``
+# attribute. Users with privacy concerns can disable this from the
+# integration's options dialog.
+CONF_REVERSE_GEOCODE = "reverse_geocode"
+DEFAULT_REVERSE_GEOCODE = True
+
+PROVIDER_GOOGLE_SHARED = "google_shared"
+PROVIDER_LOCAL_FOLDER = "local_folder"
+
+FILL_COVER = "cover"
+FILL_CONTAIN = "contain"
+FILL_BLUR = "blur"
+
+ORIENTATION_MISMATCH_PAIR = "pair"
+ORIENTATION_MISMATCH_SINGLE = "single"
+ORIENTATION_MISMATCH_AVOID = "avoid"
+
+ORDER_RANDOM = "random"
+ORDER_ALBUM = "album_order"
+ORDER_NEWEST_TAKEN = "newest_taken"
+ORDER_OLDEST_TAKEN = "oldest_taken"
+ORDER_NEWEST_ADDED = "newest_added"
+ORDER_OLDEST_ADDED = "oldest_added"
+
+ORDER_OPTIONS = [
+    ORDER_RANDOM,
+    ORDER_ALBUM,
+    ORDER_NEWEST_TAKEN,
+    ORDER_OLDEST_TAKEN,
+    ORDER_NEWEST_ADDED,
+    ORDER_OLDEST_ADDED,
+]
+
+DATE_FILTER_OFF = "off"
+DATE_FILTER_LAST_7 = "last_7_days"
+DATE_FILTER_LAST_30 = "last_30_days"
+DATE_FILTER_LAST_365 = "last_365_days"
+DATE_FILTER_THIS_MONTH = "this_month"
+DATE_FILTER_THIS_YEAR = "this_year"
+DATE_FILTER_ON_THIS_DAY = "on_this_day"
+
+DATE_FILTER_OPTIONS = [
+    DATE_FILTER_OFF,
+    DATE_FILTER_LAST_7,
+    DATE_FILTER_LAST_30,
+    DATE_FILTER_LAST_365,
+    DATE_FILTER_THIS_MONTH,
+    DATE_FILTER_THIS_YEAR,
+    DATE_FILTER_ON_THIS_DAY,
+]
+DEFAULT_DATE_FILTER = DATE_FILTER_OFF
+
+DEFAULT_SLIDE_INTERVAL = 60
+DEFAULT_REFRESH_HOURS = 24
+DEFAULT_FILL_MODE = FILL_BLUR
+DEFAULT_ORIENTATION_MISMATCH_MODE = ORIENTATION_MISMATCH_PAIR
+DEFAULT_ORDER_MODE = ORDER_RANDOM
+DEFAULT_ASPECT_RATIO = "16:9"
+DEFAULT_PAIR_DIVIDER_PX = 8
+DEFAULT_PAIR_DIVIDER_COLOR = "#FFFFFF"
+DEFAULT_RECURSIVE = True
+# Per-album download cache. Multiple albums add up: 4 × 150 MB = 600 MB
+# of just-in-case downloaded JPEGs. 75 MB caches roughly 10-20 photos
+# at typical Google Photos resolutions, which is enough for the preload
+# path. Users with one album and lots of RAM can bump this via the
+# Image cache size number entity.
+DEFAULT_IMAGE_CACHE_MB = 75
+
+MAX_RESOLUTION_OPTIONS = ["480p", "720p", "1080p", "1440p", "4K (2160p)", "original"]
+DEFAULT_MAX_RESOLUTION = "1080p"
+MAX_RESOLUTION_SHORT_EDGE: dict[str, int | None] = {
+    "480p": 480,
+    "720p": 720,
+    "1080p": 1080,
+    "1440p": 1440,
+    "4K (2160p)": 2160,
+    "original": None,
+}
+
+PUBLICALBUM_ENDPOINT = "https://www.publicalbum.org/api/v2/webapp/embed-player/jsonrpc"
+
+SERVICE_NEXT_SLIDE = "next_slide"
+SERVICE_REFRESH_ALBUM = "refresh_album"
+ATTR_ENTRY_ID = "entry_id"

custom_components/album_slideshow/google_scraper.py

@@ -0,0 +1,472 @@
+"""Google Photos shared album client that bypasses the ~300 item HTML cap.
+
+Strategy
+--------
+1. Fetch the share URL HTML (with browser User-Agent so Google serves the
+   real page, not a JS-only shim).
+2. Extract the album media key and auth key from the embedded
+   ``AF_dataServiceRequests`` blob - the same parameters Google's JS uses
+   when it scrolls and needs more pages.
+3. Page through the album by POSTing to the public ``batchexecute`` endpoint
+   with the ``snAcKc`` RPC (the same one googlephotos.com calls). Each page
+   carries up to 300 items plus a continuation token; we loop until the
+   token is empty.
+
+This mirrors the approach used by community projects like
+``xob0t/google-photos-toolkit``. It uses only undocumented public endpoints
+and no auth.
+
+Brittleness
+-----------
+Google occasionally reshuffles the per-item array layout. We keep parsing
+positional but verify each field at access time and skip malformed entries
+rather than failing the whole batch.
+"""
+from __future__ import annotations
+
+import json
+import logging
+import re
+from typing import Any
+from urllib.parse import quote
+
+from .coordinator import MediaItem
+
+_LOGGER = logging.getLogger(__name__)
+
+_BROWSER_UA = (
+    "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) "
+    "Chrome/124.0.0.0 Safari/537.36"
+)
+
+# AF_dataServiceRequests block in the HTML carries the snAcKc request payload:
+#   "snAcKc",ext: ... ,request:["<albumKey>",null,null,"<authKey>"]
+_REQUEST_RE = re.compile(
+    r"snAcKc[^}]*?request:\s*\[\s*\"([A-Za-z0-9_-]+)\"\s*,\s*null\s*,\s*null\s*,\s*\"([A-Za-z0-9_-]+)\"",
+    re.DOTALL,
+)
+
+# XSSI prefix Google prepends to batchexecute responses. We strip it before parsing.
+_XSSI = ")]}'"
+
+# Hard ceiling - matches the upstream Google album item limit.
+_MAX_ITEMS = 20_000
+
+# Per-page item count Google returns. Used only for sanity logging.
+_PAGE_SIZE = 300
+
+# Strip any existing ``=w...-h...`` suffix from a Google CDN URL so we can
+# attach our own size hint based on the photo's known dimensions.
+_SIZE_SUFFIX_RE = re.compile(r"=[wh]\d+(?:-[a-z0-9]+)*$", re.IGNORECASE)
+
+_VIDEO_DURATION_KEY = 76647426  # presence indicates a video; we skip those
+_LIVEPHOTO_KEY = 146008172
+
+
+class _AlbumKeys:
+    __slots__ = ("album_key", "auth_key")
+
+    def __init__(self, album_key: str, auth_key: str) -> None:
+        self.album_key = album_key
+        self.auth_key = auth_key
+
+
+async def fetch_album(session, share_url: str, *, timeout: float = 30.0) -> tuple[str | None, list[MediaItem]]:
+    """Fetch a shared album in full. Returns (title, items).
+
+    The HTML page is fetched once - just to recover the album/auth keys and
+    title. All actual photo enumeration goes through Google's ``batchexecute``
+    endpoint, which is the only way to reach photos beyond the first ~300.
+    """
+    keys, title = await _fetch_album_keys(session, share_url, timeout=timeout)
+    if keys is None:
+        return None, []
+
+    items: list[MediaItem] = []
+    seen_urls: set[str] = set()
+    page_id: str | None = None
+    page_no = 0
+    while True:
+        page_no += 1
+        try:
+            page_items, page_id = await _fetch_album_page(
+                session, keys, page_id, timeout=timeout
+            )
+        except Exception as err:
+            _LOGGER.warning(
+                "Album scrape: page %d batchexecute failed (%s); returning %d items so far",
+                page_no, err, len(items),
+            )
+            break
+
+        added = 0
+        for it in page_items:
+            if it.url in seen_urls:
+                continue
+            seen_urls.add(it.url)
+            items.append(it)
+            added += 1
+            if len(items) >= _MAX_ITEMS:
+                break
+        _LOGGER.debug(
+            "Album scrape: page %d returned %d items (%d new), running total %d",
+            page_no, len(page_items), added, len(items),
+        )
+        if not page_id or len(items) >= _MAX_ITEMS or added == 0:
+            break
+
+    _LOGGER.info(
+        "Album scraper: batchexecute fetched %d photos in %d page(s)",
+        len(items), page_no,
+    )
+    return title, items
+
+
+# -- Internals ---------------------------------------------------------------
+
+async def _fetch_album_keys(
+    session, share_url: str, *, timeout: float
+) -> tuple[_AlbumKeys | None, str | None]:
+    """Fetch the share URL HTML and extract the album/auth keys + title."""
+    headers = {
+        "User-Agent": _BROWSER_UA,
+        "Accept": "text/html,application/xhtml+xml",
+        "Accept-Language": "en-US,en;q=0.9",
+    }
+    try:
+        async with session.get(
+            share_url, headers=headers, timeout=timeout, allow_redirects=True
+        ) as resp:
+            resp.raise_for_status()
+            ct = resp.headers.get("Content-Type", "").lower()
+            if "html" not in ct and "text" not in ct:
+                _LOGGER.debug("Album scrape: unexpected content-type %r", ct)
+                return None, None
+            html = await resp.text()
+    except Exception as err:
+        _LOGGER.debug("Album scrape: failed to fetch %s: %s", share_url, err)
+        return None, None
+
+    keys = _extract_keys(html)
+    if keys is None:
+        _LOGGER.debug("Album scrape: could not locate album keys in HTML")
+        return None, None
+
+    return keys, _extract_title(html)
+
+
+def _extract_keys(html: str) -> _AlbumKeys | None:
+    m = _REQUEST_RE.search(html)
+    if not m:
+        return None
+    return _AlbumKeys(album_key=m.group(1), auth_key=m.group(2))
+
+
+def _extract_title(html: str) -> str | None:
+    m = re.search(r"<title[^>]*>(.*?)</title>", html, re.IGNORECASE | re.DOTALL)
+    if not m:
+        return None
+    title = m.group(1).strip()
+    suffix = " - Google Photos"
+    if title.endswith(suffix):
+        title = title[: -len(suffix)].strip()
+    return title or None
+
+
+def _extract_first_page_items(html: str) -> list[MediaItem]:
+    """Pull the first 300 items out of the AF_initDataCallback blocks.
+
+    Returns an empty list if the embedded data can't be parsed - the caller
+    will still get the rest via batchexecute pagination.
+    """
+    candidates: list[list[Any]] = []
+    for blob in _iter_af_data_blobs(html):
+        try:
+            tree = json.loads(blob)
+        except json.JSONDecodeError:
+            continue
+        candidates.extend(_collect_album_item_lists(tree))
+
+    if not candidates:
+        return []
+
+    best = max(candidates, key=len)
+    items: list[MediaItem] = []
+    seen: set[str] = set()
+    for raw in best:
+        item = _parse_album_item(raw)
+        if item is None or item.url in seen:
+            continue
+        seen.add(item.url)
+        items.append(item)
+    return items
+
+
+def _next_page_token_for_first_page(
+    first_items: list[MediaItem], first_page_size: int
+) -> str | None:
+    """The first page's nextPageId isn't easy to find in the HTML AF blob.
+
+    Strategy: if the first page is exactly the standard page size we use a
+    sentinel empty token so the caller fetches page 2 with ``pageId=None``.
+    The batchexecute endpoint, given ``pageId=None``, returns page 1 again
+    along with the real continuation token, which we then use for the rest.
+    Slightly wasteful (we re-fetch page 1) but robust to layout changes.
+    """
+    if first_page_size >= _PAGE_SIZE:
+        return ""  # sentinel: drives the first batchexecute call
+    return None
+
+
+async def _fetch_album_page(
+    session,
+    keys: _AlbumKeys,
+    page_id: str | None,
+    *,
+    timeout: float,
+) -> tuple[list[MediaItem], str | None]:
+    """Call snAcKc once. ``page_id=""`` is treated as ``None`` (initial fetch)."""
+    pid = page_id or None
+    inner = json.dumps([keys.album_key, pid, None, keys.auth_key])
+    envelope = json.dumps([[["snAcKc", inner, None, "generic"]]])
+    form = f"f.req={quote(envelope)}"
+
+    url = (
+        "https://photos.google.com/u/0/_/PhotosUi/data/batchexecute"
+        f"?rpcids=snAcKc&source-path=/share/{quote(keys.album_key)}"
+    )
+    headers = {
+        "User-Agent": _BROWSER_UA,
+        "Content-Type": "application/x-www-form-urlencoded;charset=UTF-8",
+        "Accept": "*/*",
+        "Origin": "https://photos.google.com",
+        "Referer": f"https://photos.google.com/share/{keys.album_key}?key={keys.auth_key}",
+    }
+    async with session.post(url, data=form, headers=headers, timeout=timeout) as resp:
+        resp.raise_for_status()
+        body = await resp.text()
+    return _parse_batchexecute_album_page(body)
+
+
+def _parse_batchexecute_album_page(body: str) -> tuple[list[MediaItem], str | None]:
+    """Parse a batchexecute response for one snAcKc call.
+
+    Format (per line, after the XSSI prefix):
+      [["wrb.fr", "snAcKc", "<json-encoded inner>", null, null, "generic"], ...]
+    The inner data shape (per gptk-toolkit):
+      data[1] = list of album items
+      data[2] = nextPageId (str) or null
+    """
+    text = body.lstrip()
+    if text.startswith(_XSSI):
+        text = text[len(_XSSI):]
+    text = text.lstrip()
+
+    line = text.split("\n", 1)[0].strip()
+    if not line:
+        return [], None
+    try:
+        outer = json.loads(line)
+    except json.JSONDecodeError:
+        return [], None
+
+    inner_json: str | None = None
+    for entry in outer:
+        if isinstance(entry, list) and len(entry) >= 3 and entry[0] == "wrb.fr":
+            inner_json = entry[2]
+            break
+    if not isinstance(inner_json, str):
+        return [], None
+
+    try:
+        inner = json.loads(inner_json)
+    except json.JSONDecodeError:
+        return [], None
+
+    raw_items = inner[1] if len(inner) > 1 and isinstance(inner[1], list) else []
+    next_page = inner[2] if len(inner) > 2 and isinstance(inner[2], str) else None
+    if next_page == "":
+        next_page = None
+
+    items: list[MediaItem] = []
+    for raw in raw_items:
+        item = _parse_album_item(raw)
+        if item is not None:
+            items.append(item)
+    return items, next_page
+
+
+def _parse_album_item(raw: Any) -> MediaItem | None:
+    """Parse a single album item array.
+
+    Layout used in both AF blocks and snAcKc responses:
+      [mediaKey, [url, w, h, ..., [byte_size]], captured_ms, dedupKey,
+       timezoneOffsetMin, uploaded_ms, ..., {<numeric_keys>: ...}]
+    """
+    if not isinstance(raw, list) or len(raw) < 2:
+        return None
+    visual = raw[1]
+    if not isinstance(visual, list) or len(visual) < 3:
+        return None
+
+    url = visual[0]
+    if not isinstance(url, str) or not url.startswith("http"):
+        return None
+    width = visual[1] if isinstance(visual[1], int) else None
+    height = visual[2] if isinstance(visual[2], int) else None
+
+    # Skip videos: their last element is a dict with key 76647426 (duration).
+    if raw and isinstance(raw[-1], dict):
+        if _VIDEO_DURATION_KEY in raw[-1] or "76647426" in raw[-1]:
+            # Note: live photos also carry a duration but are still images;
+            # we treat the presence of duration as "video". If a user reports
+            # missing live photos we can revisit by checking 146008172 too.
+            return None
+
+    captured_at = raw[2] if len(raw) > 2 and _looks_like_timestamp_ms(raw[2]) else None
+    uploaded_at = raw[5] if len(raw) > 5 and _looks_like_timestamp_ms(raw[5]) else None
+
+    # File size, when present, lives at visual[-1][0] as a single int.
+    byte_size: int | None = None
+    if visual and isinstance(visual[-1], list) and visual[-1]:
+        candidate = visual[-1][0]
+        if isinstance(candidate, int) and candidate > 0:
+            byte_size = candidate
+
+    return MediaItem(
+        url=_normalise_size(url, width, height),
+        width=width,
+        height=height,
+        mime_type=None,
+        filename=None,
+        captured_at=captured_at,
+        uploaded_at=uploaded_at,
+        byte_size=byte_size,
+    )
+
+
+# Plausible epoch-ms range: 2000-01-01 to 2100-01-01.
+_MIN_TS_MS = 946_684_800_000
+_MAX_TS_MS = 4_102_444_800_000
+
+
+def _looks_like_timestamp_ms(value: Any) -> bool:
+    return isinstance(value, int) and _MIN_TS_MS <= value <= _MAX_TS_MS
+
+
+# -- AF block parsing (for the initial 300 items embedded in the HTML) ------
+
+_AF_BLOCK_RE = re.compile(r"AF_initDataCallback\s*\(\s*\{", re.DOTALL)
+_DATA_KEY_RE = re.compile(r"[\s,{]data\s*:\s*\[", re.DOTALL)
+
+
+def _iter_af_data_blobs(html: str):
+    """Yield the JSON text of every AF_initDataCallback ``data:`` value."""
+    for m in _AF_BLOCK_RE.finditer(html):
+        block_end = _balanced_close(html, m.end() - 1, "{", "}")
+        if block_end is None:
+            continue
+        block = html[m.end() - 1: block_end + 1]
+        data_match = _DATA_KEY_RE.search(block)
+        if data_match is None:
+            continue
+        open_pos = data_match.end() - 1
+        close_pos = _balanced_close(block, open_pos, "[", "]")
+        if close_pos is None:
+            continue
+        yield block[open_pos: close_pos + 1]
+
+
+def _balanced_close(s: str, open_idx: int, open_char: str, close_char: str) -> int | None:
+    if open_idx >= len(s) or s[open_idx] != open_char:
+        return None
+    depth = 0
+    in_string: str | None = None
+    i = open_idx
+    n = len(s)
+    while i < n:
+        c = s[i]
+        if in_string is not None:
+            if c == "\\":
+                i += 2
+                continue
+            if c == in_string:
+                in_string = None
+            i += 1
+            continue
+        if c in ("'", '"'):
+            in_string = c
+            i += 1
+            continue
+        if c == open_char:
+            depth += 1
+        elif c == close_char:
+            depth -= 1
+            if depth == 0:
+                return i
+        i += 1
+    return None
+
+
+def _collect_album_item_lists(node: Any, _out: list[list[Any]] | None = None) -> list[list[Any]]:
+    """Walk the AF data tree, collecting lists of album-item-shaped entries."""
+    out = _out if _out is not None else []
+    if isinstance(node, list):
+        if _list_looks_like_album_items(node):
+            out.append(node)
+        for child in node:
+            _collect_album_item_lists(child, out)
+    elif isinstance(node, dict):
+        for child in node.values():
+            _collect_album_item_lists(child, out)
+    return out
+
+
+def _list_looks_like_album_items(lst: list[Any]) -> bool:
+    if not lst:
+        return False
+    sample = lst[:20]
+    for item in sample:
+        if _parse_album_item(item) is None:
+            return False
+    return True
+
+
+# -- URL normalisation -------------------------------------------------------
+
+def _normalise_size(url: str, width: int | None, height: int | None) -> str:
+    """Strip any existing size suffix and request a 4K-capped version."""
+    base = _SIZE_SUFFIX_RE.sub("", url)
+    if width and height:
+        try:
+            w = int(width)
+            h = int(height)
+        except (TypeError, ValueError):
+            return f"{base}=w1920-h1080"
+        longest = max(w, h)
+        if longest > 3840:
+            scale = 3840 / longest
+            w = max(1, int(round(w * scale)))
+            h = max(1, int(round(h * scale)))
+        return f"{base}=w{w}-h{h}"
+    return f"{base}=w1920-h1080"
+
+
+# Backwards-compatible names so the existing tests still find the helpers.
+def parse_album_html(html: str) -> list[MediaItem]:
+    """Parse only the first-page items embedded in the HTML.
+
+    Retained for backwards compatibility with the 0.5.0-rc1 surface; new
+    callers should use ``fetch_album`` for the full paginated result.
+    """
+    return _extract_first_page_items(html)
+
+
+_PHOTO_HOST_RE = re.compile(
+    r"^https?://(?:[a-z0-9-]+\.)?(?:googleusercontent\.com|google\.com)/",
+    re.IGNORECASE,
+)
+
+
+def _is_dimension(v: Any) -> bool:
+    return isinstance(v, int) and 16 <= v <= 20_000

custom_components/album_slideshow/image_processing.py

@@ -0,0 +1,277 @@
+from __future__ import annotations
+
+import io
+import logging
+
+from PIL import Image, ImageColor, ImageFilter, ImageOps
+
+from .coordinator import MediaItem
+
+_LOGGER = logging.getLogger(__name__)
+
+# Re-export fill mode constants so callers can import from here.
+FILL_COVER = "cover"
+FILL_CONTAIN = "contain"
+FILL_BLUR = "blur"
+
+# Absolute pixel ceiling. A 20000x20000 JPEG decodes to ~1.2 GB of RGB; Pillow
+# raises DecompressionBombError above MAX_IMAGE_PIXELS. We set this high enough
+# that 4K+ sources still decode, but reject anything absurd to protect
+# low-memory devices like the Home Assistant Green.
+_MAX_IMAGE_PIXELS = 80_000_000  # ~8K x 10K
+Image.MAX_IMAGE_PIXELS = _MAX_IMAGE_PIXELS
+
+
+def open_image(
+    data: bytes,
+    target_size: tuple[int, int] | None = None,
+) -> Image.Image:
+    """Open image bytes, apply EXIF orientation, normalise to RGB/RGBA.
+
+    If ``target_size`` is given, uses PIL's ``draft`` mode so libjpeg decodes
+    at a reduced scale. Big speed/memory win on low-power devices when the
+    source is much larger than the output canvas.
+    """
+    img = Image.open(io.BytesIO(data))
+    if target_size is not None and img.format == "JPEG":
+        try:
+            img.draft("RGB", target_size)
+        except Exception:
+            pass
+    img = ImageOps.exif_transpose(img)
+    # Force pixel data into memory; BytesIO must stay reachable until here.
+    img.load()
+    if img.mode not in ("RGB", "RGBA"):
+        img = img.convert("RGB")
+    return img
+
+
+def safe_close(img: Image.Image | None) -> None:
+    """Close a PIL image without raising. No-op on None."""
+    if img is None:
+        return
+    try:
+        img.close()
+    except Exception:
+        pass
+
+
+def is_portrait_img(img: Image.Image) -> bool:
+    try:
+        w, h = img.size
+        return h >= w
+    except Exception:
+        return False
+
+
+def is_portrait_item(item: MediaItem, img: Image.Image | None = None) -> bool:
+    by_meta = _is_portrait_dims(item.width, item.height)
+    if by_meta is not None:
+        return by_meta
+    if img is not None:
+        return is_portrait_img(img)
+    return False
+
+
+def is_portrait_item_by_metadata(item: MediaItem) -> bool | None:
+    """Return portrait/landscape from item metadata only, or None if unknown."""
+    return _is_portrait_dims(item.width, item.height)
+
+
+def resolve_output_size(
+    req_w: int | None,
+    req_h: int | None,
+    ratio: str,
+    max_short_edge: int | None = None,
+) -> tuple[int, int]:
+    ratio_w, ratio_h = _parse_aspect_ratio(ratio)
+    target = ratio_w / ratio_h
+
+    if req_w is None and req_h is None:
+        if ratio_w >= ratio_h:
+            width = 3840
+            height = max(1, int(round(width / target)))
+        else:
+            height = 3840
+            width = max(1, int(round(height * target)))
+    elif req_w is None:
+        height = max(1, int(req_h or 2160))
+        width = max(1, int(round(height * target)))
+    elif req_h is None:
+        width = max(1, int(req_w or 3840))
+        height = max(1, int(round(width / target)))
+    else:
+        req_w = max(1, int(req_w))
+        req_h = max(1, int(req_h))
+        if (req_w / req_h) >= target:
+            height = req_h
+            width = max(1, int(round(height * target)))
+        else:
+            width = req_w
+            height = max(1, int(round(width / target)))
+
+    if max_short_edge is not None:
+        short = min(width, height)
+        if short > max_short_edge:
+            scale = max_short_edge / short
+            width = max(1, int(round(width * scale)))
+            height = max(1, int(round(height * scale)))
+
+    return (width, height)
+
+
+def render_image(img: Image.Image, fill_mode: str, width: int, height: int) -> Image.Image:
+    """Render img into a (width x height) canvas using the given fill mode."""
+    if fill_mode == FILL_CONTAIN:
+        return _resize_contain(img, width, height)
+    if fill_mode == FILL_BLUR:
+        return _blur_fill(img, width, height)
+    return _resize_cover(img, width, height)
+
+
+def pair_images(
+    img1: Image.Image,
+    img2: Image.Image,
+    target_w: int,
+    target_h: int,
+    fill_mode: str,
+    portrait_canvas: bool,
+    divider: int,
+    divider_fill: tuple[int, int, int] | tuple[int, int, int, int],
+    transparent_divider: bool,
+) -> Image.Image:
+    canvas_mode = "RGBA" if transparent_divider else "RGB"
+    canvas = Image.new(canvas_mode, (target_w, target_h), divider_fill)
+
+    if portrait_canvas:
+        top_h = max(1, (target_h - divider) // 2)
+        bottom_h = max(1, target_h - divider - top_h)
+        top_img = render_image(img1, fill_mode, target_w, top_h)
+        bottom_img = render_image(img2, fill_mode, target_w, bottom_h)
+        canvas.paste(top_img.convert(canvas_mode), (0, 0))
+        canvas.paste(bottom_img.convert(canvas_mode), (0, top_h + divider))
+        safe_close(top_img)
+        safe_close(bottom_img)
+        return canvas
+
+    left_w = max(1, (target_w - divider) // 2)
+    right_w = max(1, target_w - divider - left_w)
+    left_img = render_image(img1, fill_mode, left_w, target_h)
+    right_img = render_image(img2, fill_mode, right_w, target_h)
+    canvas.paste(left_img.convert(canvas_mode), (0, 0))
+    canvas.paste(right_img.convert(canvas_mode), (left_w + divider, 0))
+    safe_close(left_img)
+    safe_close(right_img)
+    return canvas
+
+
+def encode_image(img: Image.Image) -> bytes:
+    """Encode a PIL image to a client-compatible JPEG or PNG.
+
+    JPEGs are written as baseline (non-progressive) with 4:2:0 subsampling and
+    without EXIF, which maximises compatibility with Android WebView and older
+    clients. RGBA images are encoded as PNG to preserve alpha.
+    """
+    out = io.BytesIO()
+    if "A" in img.getbands():
+        img.save(out, format="PNG", optimize=True)
+        return out.getvalue()
+    rgb = img if img.mode == "RGB" else img.convert("RGB")
+    rgb.save(
+        out,
+        format="JPEG",
+        quality=88,
+        optimize=True,
+        progressive=False,
+        subsampling=2,
+    )
+    if rgb is not img:
+        safe_close(rgb)
+    return out.getvalue()
+
+
+def parse_divider_color(color: str) -> tuple[tuple[int, int, int] | tuple[int, int, int, int], bool]:
+    raw = (color or "").strip().lower()
+    compact = raw.replace(" ", "")
+    if compact in ("transparent", "transperant", "none", "clear", "rgba(0,0,0,0)"):
+        return (0, 0, 0, 0), True
+    try:
+        return ImageColor.getrgb(color), False
+    except Exception:
+        return (255, 255, 255), False
+
+
+# -- Private helpers ---------------------------------------------------------
+
+def _is_portrait_dims(width: int | None, height: int | None) -> bool | None:
+    if not width or not height:
+        return None
+    try:
+        w, h = int(width), int(height)
+        if w <= 0 or h <= 0:
+            return None
+        return h >= w
+    except Exception:
+        return None
+
+
+def _parse_aspect_ratio(ratio: str) -> tuple[int, int]:
+    try:
+        left, right = ratio.split(":", maxsplit=1)
+        w, h = int(left), int(right)
+        if w > 0 and h > 0:
+            return (w, h)
+    except Exception:
+        pass
+    return (16, 9)
+
+
+def _resize_cover(img: Image.Image, target_w: int, target_h: int) -> Image.Image:
+    src_w, src_h = img.size
+    if src_w <= 0 or src_h <= 0:
+        return img.resize((target_w, target_h))
+    scale = max(target_w / src_w, target_h / src_h)
+    new_w = max(1, int(round(src_w * scale)))
+    new_h = max(1, int(round(src_h * scale)))
+    resized = img.resize((new_w, new_h), Image.Resampling.LANCZOS)
+    left = max(0, int(round((new_w - target_w) / 2)))
+    top = max(0, int(round((new_h - target_h) / 2)))
+    cropped = resized.crop((left, top, left + target_w, top + target_h))
+    if cropped is not resized:
+        safe_close(resized)
+    return cropped
+
+
+def _resize_contain(img: Image.Image, target_w: int, target_h: int, bg=(0, 0, 0)) -> Image.Image:
+    src_w, src_h = img.size
+    if src_w <= 0 or src_h <= 0:
+        return img.resize((target_w, target_h))
+    scale = min(target_w / src_w, target_h / src_h)
+    new_w = max(1, int(src_w * scale))
+    new_h = max(1, int(src_h * scale))
+    resized = img.resize((new_w, new_h), Image.Resampling.LANCZOS)
+    canvas = Image.new("RGB", (target_w, target_h), bg)
+    rgb_resized = resized if resized.mode == "RGB" else resized.convert("RGB")
+    canvas.paste(rgb_resized, ((target_w - new_w) // 2, (target_h - new_h) // 2))
+    if rgb_resized is not resized:
+        safe_close(rgb_resized)
+    safe_close(resized)
+    return canvas
+
+
+def _blur_fill(img: Image.Image, target_w: int, target_h: int) -> Image.Image:
+    bg = _resize_cover(img, target_w, target_h).filter(ImageFilter.GaussianBlur(radius=24))
+    src_w, src_h = img.size
+    if src_w <= 0 or src_h <= 0:
+        return bg
+    scale = min(target_w / src_w, target_h / src_h)
+    new_w = max(1, int(src_w * scale))
+    new_h = max(1, int(src_h * scale))
+    fg = img.resize((new_w, new_h), Image.Resampling.LANCZOS)
+    rgb_fg = fg if fg.mode == "RGB" else fg.convert("RGB")
+    bg.paste(rgb_fg, ((target_w - new_w) // 2, (target_h - new_h) // 2))
+    if rgb_fg is not fg:
+        safe_close(rgb_fg)
+    safe_close(fg)
+    return bg
+

custom_components/album_slideshow/manifest.json

@@ -0,0 +1,12 @@
+{
+  "domain": "album_slideshow",
+  "name": "Album Slideshow Camera",
+  "codeowners": ["@eyalgal"],
+  "config_flow": true,
+  "dependencies": ["http", "frontend"],
+  "documentation": "https://github.com/eyalgal/album_slideshow",
+  "iot_class": "cloud_polling",
+  "issue_tracker": "https://github.com/eyalgal/album_slideshow/issues",
+  "requirements": ["Pillow"],
+  "version": "1.0.0"
+}

custom_components/album_slideshow/number.py

@@ -0,0 +1,174 @@
+from __future__ import annotations
+
+from homeassistant.components.number import NumberEntity, NumberMode
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.restore_state import RestoreEntity
+
+from .const import DOMAIN
+from .coordinator import AlbumCoordinator
+from .store import SlideshowStore
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    store: SlideshowStore = hass.data[DOMAIN][entry.entry_id]["store"]
+    coordinator: AlbumCoordinator = hass.data[DOMAIN][entry.entry_id]["coordinator"]
+
+    async_add_entities(
+        [
+            SlideIntervalNumber(entry, store),
+            RefreshHoursNumber(entry, store, coordinator),
+            PairDividerWidthNumber(entry, store),
+            ImageCacheMbNumber(entry, store),
+        ]
+    )
+
+
+class _BaseNumber(NumberEntity, RestoreEntity):
+    _attr_has_entity_name = True
+    _attr_should_poll = False
+    _attr_mode = NumberMode.BOX
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        self.entry = entry
+        self.store = store
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        self.store.add_listener(self.async_write_ha_state)
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+
+class SlideIntervalNumber(_BaseNumber):
+    _attr_icon = "mdi:timer-outline"
+    _attr_native_min_value = 3
+    _attr_native_max_value = 3600
+    _attr_native_step = 1
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_interval"
+        self._attr_name = "Slide interval (seconds)"
+
+    @property
+    def native_value(self):
+        return int(self.store.slide_interval)
+
+    async def async_set_native_value(self, value: float) -> None:
+        self.store.slide_interval = int(value)
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state not in (None, "unknown", "unavailable"):
+            try:
+                self.store.slide_interval = int(float(old.state))
+                self.store.notify()
+            except Exception:
+                return
+
+
+class RefreshHoursNumber(_BaseNumber):
+    _attr_icon = "mdi:refresh"
+    _attr_native_min_value = 1
+    _attr_native_max_value = 168
+    _attr_native_step = 1
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore, coordinator: AlbumCoordinator) -> None:
+        super().__init__(entry, store)
+        self.coordinator = coordinator
+        self._attr_unique_id = f"{entry.entry_id}_refresh_minutes"
+        self._attr_name = "Album refresh (hours)"
+
+    @property
+    def native_value(self):
+        return int(self.store.refresh_hours)
+
+    async def async_set_native_value(self, value: float) -> None:
+        self.store.refresh_hours = int(value)
+        self.store.notify()
+        await self.coordinator.async_request_refresh()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state not in (None, "unknown", "unavailable"):
+            try:
+                val = int(float(old.state))
+                # Migration: old values were in minutes; convert if above max hours
+                if val > self._attr_native_max_value:
+                    val = max(int(val / 60), int(self._attr_native_min_value))
+                self.store.refresh_hours = val
+                self.store.notify()
+            except Exception:
+                return
+
+
+class PairDividerWidthNumber(_BaseNumber):
+    _attr_icon = "mdi:border-vertical"
+    _attr_native_min_value = 0
+    _attr_native_max_value = 64
+    _attr_native_step = 1
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_pair_divider_px"
+        self._attr_name = "Pair divider size (px)"
+
+    @property
+    def native_value(self):
+        return int(self.store.pair_divider_px)
+
+    async def async_set_native_value(self, value: float) -> None:
+        self.store.pair_divider_px = max(0, int(value))
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state not in (None, "unknown", "unavailable"):
+            try:
+                self.store.pair_divider_px = max(0, int(float(old.state)))
+                self.store.notify()
+            except Exception:
+                return
+
+
+class ImageCacheMbNumber(_BaseNumber):
+    _attr_icon = "mdi:database-outline"
+    _attr_native_min_value = 50
+    _attr_native_max_value = 1000
+    _attr_native_step = 50
+    _attr_native_unit_of_measurement = "MB"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_image_cache_mb"
+        self._attr_name = "Image cache size (MB)"
+
+    @property
+    def native_value(self):
+        return int(self.store.image_cache_mb)
+
+    async def async_set_native_value(self, value: float) -> None:
+        self.store.image_cache_mb = max(50, int(value))
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state not in (None, "unknown", "unavailable"):
+            try:
+                self.store.image_cache_mb = max(50, int(float(old.state)))
+                self.store.notify()
+            except Exception:
+                return

custom_components/album_slideshow/playlist.py

@@ -0,0 +1,138 @@
+"""Playlist construction: ordering and date filtering.
+
+Pure, dependency-free helpers so the camera and tests can share a single
+implementation. Operates on ``MediaItem``-like objects that expose
+``captured_at`` / ``uploaded_at`` (epoch ms or ``None``).
+"""
+from __future__ import annotations
+
+from datetime import datetime, timedelta, timezone
+from typing import Iterable, TypeVar
+
+from .const import (
+    DATE_FILTER_LAST_7,
+    DATE_FILTER_LAST_30,
+    DATE_FILTER_LAST_365,
+    DATE_FILTER_OFF,
+    DATE_FILTER_ON_THIS_DAY,
+    DATE_FILTER_THIS_MONTH,
+    DATE_FILTER_THIS_YEAR,
+    ORDER_ALBUM,
+    ORDER_NEWEST_ADDED,
+    ORDER_NEWEST_TAKEN,
+    ORDER_OLDEST_ADDED,
+    ORDER_OLDEST_TAKEN,
+    ORDER_RANDOM,
+)
+
+T = TypeVar("T")
+
+
+def order_items(items: list[T], order_mode: str) -> list[T]:
+    """Return a new list ordered per ``order_mode``.
+
+    ``random`` and ``album_order`` are no-ops here - random shuffling lives
+    in the camera so it can dedupe recent slides; ``album_order`` keeps the
+    source order untouched. The taken/added orderings are stable; items
+    without the required timestamp keep their relative position at the end.
+    """
+    if order_mode == ORDER_RANDOM or order_mode == ORDER_ALBUM:
+        return list(items)
+
+    key_attr, reverse = _order_key(order_mode)
+    if key_attr is None:
+        return list(items)
+
+    with_ts: list[tuple[int, int, T]] = []
+    without_ts: list[tuple[int, T]] = []
+    for idx, it in enumerate(items):
+        ts = getattr(it, key_attr, None)
+        if isinstance(ts, int):
+            with_ts.append((ts, idx, it))
+        else:
+            without_ts.append((idx, it))
+
+    with_ts.sort(key=lambda t: (t[0], t[1]), reverse=reverse)
+    return [it for _, _, it in with_ts] + [it for _, it in without_ts]
+
+
+def _order_key(order_mode: str) -> tuple[str | None, bool]:
+    if order_mode == ORDER_NEWEST_TAKEN:
+        return "captured_at", True
+    if order_mode == ORDER_OLDEST_TAKEN:
+        return "captured_at", False
+    if order_mode == ORDER_NEWEST_ADDED:
+        return "uploaded_at", True
+    if order_mode == ORDER_OLDEST_ADDED:
+        return "uploaded_at", False
+    return None, False
+
+
+def filter_items(
+    items: Iterable[T],
+    *,
+    mode: str,
+    now: datetime | None = None,
+) -> list[T]:
+    """Filter items by ``captured_at`` according to ``mode``.
+
+    Items with no ``captured_at`` are kept by default unless the mode is
+    ``on_this_day`` (treated as a strict filter).
+
+    ``now`` is overridable for deterministic tests.
+    """
+    if not mode or mode == DATE_FILTER_OFF:
+        return list(items)
+
+    today_utc = (now or datetime.now(timezone.utc)).astimezone(timezone.utc)
+
+    pred, strict = _build_predicate(mode, today_utc)
+    if pred is None:
+        return list(items)
+
+    out: list[T] = []
+    for it in items:
+        ts = getattr(it, "captured_at", None)
+        if not isinstance(ts, int):
+            if not strict:
+                out.append(it)
+            continue
+        if pred(ts):
+            out.append(it)
+    return out
+
+
+def _build_predicate(
+    mode: str,
+    today_utc: datetime,
+):
+    """Return (predicate, strict). ``strict`` drops items without timestamps."""
+    if mode == DATE_FILTER_LAST_7:
+        cutoff = int((today_utc - timedelta(days=7)).timestamp() * 1000)
+        return (lambda ts: ts >= cutoff), False
+    if mode == DATE_FILTER_LAST_30:
+        cutoff = int((today_utc - timedelta(days=30)).timestamp() * 1000)
+        return (lambda ts: ts >= cutoff), False
+    if mode == DATE_FILTER_LAST_365:
+        cutoff = int((today_utc - timedelta(days=365)).timestamp() * 1000)
+        return (lambda ts: ts >= cutoff), False
+    if mode == DATE_FILTER_THIS_MONTH:
+        start = today_utc.replace(day=1, hour=0, minute=0, second=0, microsecond=0)
+        cutoff = int(start.timestamp() * 1000)
+        return (lambda ts: ts >= cutoff), False
+    if mode == DATE_FILTER_THIS_YEAR:
+        start = today_utc.replace(month=1, day=1, hour=0, minute=0, second=0, microsecond=0)
+        cutoff = int(start.timestamp() * 1000)
+        return (lambda ts: ts >= cutoff), False
+    if mode == DATE_FILTER_ON_THIS_DAY:
+        # Match items whose UTC month+day equals today's. Useful for daily
+        # "memories"-style rotation across all years.
+        today_md = (today_utc.month, today_utc.day)
+
+        def _on_this_day(ts: int) -> bool:
+            d = datetime.fromtimestamp(ts / 1000, tz=timezone.utc)
+            return (d.month, d.day) == today_md
+
+        return _on_this_day, True
+
+    return None, False

custom_components/album_slideshow/select.py

@@ -0,0 +1,241 @@
+from __future__ import annotations
+
+from homeassistant.components.select import SelectEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.restore_state import RestoreEntity
+
+from .const import (
+    DOMAIN,
+    FILL_COVER,
+    FILL_CONTAIN,
+    FILL_BLUR,
+    MAX_RESOLUTION_OPTIONS,
+    ORIENTATION_MISMATCH_PAIR,
+    ORIENTATION_MISMATCH_SINGLE,
+    ORIENTATION_MISMATCH_AVOID,
+    ORDER_OPTIONS,
+    ORDER_RANDOM,
+    DATE_FILTER_OPTIONS,
+    DATE_FILTER_OFF,
+)
+from .store import SlideshowStore
+
+ASPECT_RATIO_OPTIONS = ["16:9", "16:10", "4:3", "1:1", "3:4", "10:16", "9:16"]
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    store: SlideshowStore = hass.data[DOMAIN][entry.entry_id]["store"]
+    async_add_entities(
+        [
+            FillModeSelect(entry, store),
+            PortraitModeSelect(entry, store),
+            OrderModeSelect(entry, store),
+            AspectRatioSelect(entry, store),
+            MaxResolutionSelect(entry, store),
+            DateFilterSelect(entry, store),
+        ]
+    )
+
+
+class _BaseSelect(SelectEntity, RestoreEntity):
+    _attr_has_entity_name = True
+    _attr_should_poll = False
+    _attr_entity_registry_enabled_default = True
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        self.entry = entry
+        self.store = store
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        self.store.add_listener(self.async_write_ha_state)
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+
+class FillModeSelect(_BaseSelect):
+    _attr_icon = "mdi:aspect-ratio"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_fill_mode"
+        self._attr_name = "Fill mode"
+        self._attr_options = [FILL_BLUR, FILL_COVER, FILL_CONTAIN]
+
+    @property
+    def current_option(self):
+        value = self.store.fill_mode
+        return value if value in self.options else self.options[0]
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.fill_mode = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state in self.options:
+            self.store.fill_mode = old.state
+            self.store.notify()
+
+
+class PortraitModeSelect(_BaseSelect):
+    _attr_icon = "mdi:account-box-outline"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_portrait_mode"
+        self._attr_name = "Orientation mismatch mode"
+        self._attr_options = [
+            ORIENTATION_MISMATCH_PAIR,
+            ORIENTATION_MISMATCH_SINGLE,
+            ORIENTATION_MISMATCH_AVOID,
+        ]
+
+    @property
+    def current_option(self):
+        value = self.store.portrait_mode
+        return value if value in self.options else self.options[0]
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.portrait_mode = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old:
+            restored = old.state
+            if restored in ("blur", "crop"):
+                restored = ORIENTATION_MISMATCH_SINGLE
+            if restored in self.options:
+                self.store.portrait_mode = restored
+                self.store.notify()
+
+
+class OrderModeSelect(_BaseSelect):
+    _attr_icon = "mdi:shuffle-variant"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_order_mode"
+        self._attr_name = "Order mode"
+        self._attr_options = list(ORDER_OPTIONS)
+
+    @property
+    def current_option(self):
+        value = self.store.order_mode
+        return value if value in self.options else ORDER_RANDOM
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.order_mode = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state in self.options:
+            self.store.order_mode = old.state
+            self.store.notify()
+
+
+class AspectRatioSelect(_BaseSelect):
+    _attr_icon = "mdi:crop"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_aspect_ratio"
+        self._attr_name = "Aspect ratio"
+        self._attr_options = ASPECT_RATIO_OPTIONS
+
+    @property
+    def current_option(self):
+        value = self.store.aspect_ratio
+        return value if value in self.options else self.options[0]
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.aspect_ratio = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state in self.options:
+            self.store.aspect_ratio = old.state
+            self.store.notify()
+
+
+class MaxResolutionSelect(_BaseSelect):
+    _attr_icon = "mdi:image-size-select-large"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_max_resolution"
+        self._attr_name = "Max resolution"
+        self._attr_options = MAX_RESOLUTION_OPTIONS
+
+    @property
+    def current_option(self):
+        value = self.store.max_resolution
+        return value if value in self.options else self.options[0]
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.max_resolution = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state in self.options:
+            self.store.max_resolution = old.state
+            self.store.notify()
+
+
+class DateFilterSelect(_BaseSelect):
+    _attr_icon = "mdi:calendar-filter"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        super().__init__(entry, store)
+        self._attr_unique_id = f"{entry.entry_id}_date_filter"
+        self._attr_name = "Date filter"
+        self._attr_options = list(DATE_FILTER_OPTIONS)
+
+    @property
+    def current_option(self):
+        value = self.store.date_filter
+        return value if value in self.options else DATE_FILTER_OFF
+
+    async def async_select_option(self, option: str) -> None:
+        if option not in self.options:
+            return
+        self.store.date_filter = option
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        old = await self.async_get_last_state()
+        if old and old.state in self.options:
+            self.store.date_filter = old.state
+            self.store.notify()

custom_components/album_slideshow/sensor.py

@@ -0,0 +1,150 @@
+from __future__ import annotations
+
+from homeassistant.components.sensor import SensorEntity, SensorStateClass
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity import EntityCategory
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+
+from .const import DOMAIN, PROVIDER_GOOGLE_SHARED, PROVIDER_LOCAL_FOLDER
+from .coordinator import AlbumCoordinator
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    coordinator: AlbumCoordinator = hass.data[DOMAIN][entry.entry_id]["coordinator"]
+    entities: list[SensorEntity] = [
+        AlbumCountSensor(entry, coordinator),
+        AlbumTitleSensor(entry, coordinator),
+        CacheUsageSensor(entry, coordinator),
+    ]
+    if coordinator.provider == PROVIDER_LOCAL_FOLDER:
+        # Diagnostic surface for the local-folder background enrichment
+        # (EXIF reads + reverse-geocode). For Google albums there's no
+        # enrichment work, so this sensor is omitted to keep the device
+        # screen tidy.
+        entities.append(EnrichmentProgressSensor(entry, coordinator))
+    async_add_entities(entities)
+
+
+class _BaseAlbumSensor(SensorEntity):
+    _attr_should_poll = False
+    _attr_has_entity_name = True
+
+    def __init__(self, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        self.entry = entry
+        self.coordinator = coordinator
+        coordinator.async_add_listener(self.async_write_ha_state)
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+    def _provider_icon(self) -> str:
+        if self.coordinator.provider == PROVIDER_GOOGLE_SHARED:
+            return "mdi:google-photos"
+        return "mdi:folder-multiple-image"
+
+
+class AlbumCountSensor(_BaseAlbumSensor):
+    def __init__(self, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_count"
+        self._attr_name = "Photo count"
+
+    @property
+    def icon(self) -> str:
+        return self._provider_icon()
+
+    @property
+    def native_value(self):
+        data = self.coordinator.data or {}
+        return len(data.get("items", []))
+
+
+class AlbumTitleSensor(_BaseAlbumSensor):
+    def __init__(self, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_title"
+        self._attr_name = "Album title"
+
+    @property
+    def icon(self) -> str:
+        return self._provider_icon()
+
+    @property
+    def native_value(self):
+        data = self.coordinator.data or {}
+        return data.get("title")
+
+
+class CacheUsageSensor(_BaseAlbumSensor):
+    _attr_entity_category = EntityCategory.DIAGNOSTIC
+    _attr_native_unit_of_measurement = "MB"
+    _attr_state_class = SensorStateClass.MEASUREMENT
+    _attr_icon = "mdi:database"
+    _attr_should_poll = True
+
+    def __init__(self, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_cache_usage"
+        self._attr_name = "Image cache usage"
+
+    @property
+    def native_value(self):
+        cam = self.hass.data.get(DOMAIN, {}).get(self.entry.entry_id, {}).get("camera")
+        if cam is None:
+            return None
+        return cam.cache_usage_mb
+
+
+class EnrichmentProgressSensor(_BaseAlbumSensor):
+    """Percent-complete sensor for the local-folder enrichment worker.
+
+    Reports the slower-changing of the two phases:
+    - ``exif``: reading capture date + GPS from EXIF tags.
+    - ``geocoding``: reverse-geocoding GPS to a city/country label.
+
+    Holds at ``100`` when both phases finish and stays there until the
+    next coordinator refresh discovers new files. The ``phase`` and
+    raw counts are surfaced as state attributes so dashboards can show
+    progress text alongside the bar.
+    """
+
+    _attr_entity_category = EntityCategory.DIAGNOSTIC
+    _attr_native_unit_of_measurement = "%"
+    _attr_state_class = SensorStateClass.MEASUREMENT
+    _attr_icon = "mdi:map-marker-radius"
+
+    def __init__(self, entry: ConfigEntry, coordinator: AlbumCoordinator) -> None:
+        super().__init__(entry, coordinator)
+        self._attr_unique_id = f"{entry.entry_id}_enrichment_progress"
+        self._attr_name = "Enrichment progress"
+
+    @property
+    def native_value(self):
+        prog = getattr(self.coordinator, "_enrich_progress", None) or {}
+        phase = prog.get("phase")
+        if phase == "geocoding":
+            total = prog.get("geocode_total") or 0
+            done = prog.get("geocode_done") or 0
+        else:
+            total = prog.get("exif_total") or 0
+            done = prog.get("exif_done") or 0
+        if total <= 0:
+            return None
+        return max(0, min(100, round(100 * done / total)))
+
+    @property
+    def extra_state_attributes(self):
+        prog = getattr(self.coordinator, "_enrich_progress", None) or {}
+        return {
+            "phase": prog.get("phase"),
+            "exif_total": prog.get("exif_total", 0),
+            "exif_done": prog.get("exif_done", 0),
+            "geocode_total": prog.get("geocode_total", 0),
+            "geocode_done": prog.get("geocode_done", 0),
+        }

custom_components/album_slideshow/services.yaml

@@ -0,0 +1,21 @@
+next_slide:
+  name: Next slide
+  description: Advance the slideshow to the next image for a specific config entry.
+  fields:
+    entry_id:
+      name: Entry ID
+      description: The config entry id for the album slideshow instance.
+      required: true
+      selector:
+        text:
+
+refresh_album:
+  name: Refresh album
+  description: Refresh the album list for a specific config entry.
+  fields:
+    entry_id:
+      name: Entry ID
+      description: The config entry id for the album slideshow instance.
+      required: true
+      selector:
+        text:

custom_components/album_slideshow/store.py

@@ -0,0 +1,55 @@
+from __future__ import annotations
+
+from dataclasses import dataclass, field
+from typing import Callable
+
+from .const import (
+    DEFAULT_SLIDE_INTERVAL,
+    DEFAULT_REFRESH_HOURS,
+    DEFAULT_FILL_MODE,
+    DEFAULT_ORIENTATION_MISMATCH_MODE,
+    DEFAULT_ORDER_MODE,
+    DEFAULT_ASPECT_RATIO,
+    DEFAULT_PAIR_DIVIDER_PX,
+    DEFAULT_PAIR_DIVIDER_COLOR,
+    DEFAULT_IMAGE_CACHE_MB,
+    DEFAULT_MAX_RESOLUTION,
+    DEFAULT_DATE_FILTER,
+)
+
+
+Listener = Callable[[], None]
+
+
+@dataclass
+class SlideshowStore:
+    slide_interval: int = DEFAULT_SLIDE_INTERVAL
+    refresh_hours: int = DEFAULT_REFRESH_HOURS
+    fill_mode: str = DEFAULT_FILL_MODE
+    portrait_mode: str = DEFAULT_ORIENTATION_MISMATCH_MODE
+    order_mode: str = DEFAULT_ORDER_MODE
+    aspect_ratio: str = DEFAULT_ASPECT_RATIO
+    pair_divider_px: int = DEFAULT_PAIR_DIVIDER_PX
+    pair_divider_color: str = DEFAULT_PAIR_DIVIDER_COLOR
+    image_cache_mb: int = DEFAULT_IMAGE_CACHE_MB
+    max_resolution: str = DEFAULT_MAX_RESOLUTION
+
+    # Date filter mode (preset windows like this_year / on_this_day).
+    date_filter: str = DEFAULT_DATE_FILTER
+
+    # Pause toggle - when True, the slideshow holds on the current frame.
+    paused: bool = False
+
+    # In-memory last rendered frame. Not user-configurable; used to re-serve
+    # the previous slide instantly across a camera reload.
+    last_frame: bytes | None = None
+
+    _listeners: list[Listener] = field(default_factory=list)
+
+    def add_listener(self, cb: Listener) -> None:
+        if cb not in self._listeners:
+            self._listeners.append(cb)
+
+    def notify(self) -> None:
+        for cb in list(self._listeners):
+            cb()

custom_components/album_slideshow/strings.json

@@ -0,0 +1,45 @@
+{
+  "config": {
+    "step": {
+      "user": {
+        "title": "Add album slideshow",
+        "description": "Choose a source for the slideshow.",
+        "data": {
+          "provider": "Source"
+        }
+      },
+      "google_shared": {
+        "title": "Google Photos",
+        "description": "Paste a Google Photos shared album share link.",
+        "data": {
+          "album_name": "Album name",
+          "album_url": "Shared album link"
+        }
+      },
+      "local_folder": {
+        "title": "Local Folder",
+        "description": "Pick a folder path on your Home Assistant filesystem. Use /local/... (maps to /config/www/...) or /media/local/... for NAS-mounted media folders. See the README for details.",
+        "data": {
+          "album_name": "Album name",
+          "local_path": "Folder path",
+          "recursive": "Include subfolders"
+        }
+      }
+    },
+    "error": {
+      "invalid_album_url": "That does not look like a Google Photos shared album link.",
+      "invalid_path": "Path is empty or invalid."
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Local Folder options",
+        "description": "Reverse geocoding sends your photos' EXIF GPS coordinates to the public OpenStreetMap Nominatim service to look up a human-readable place name. Coordinates are rounded to ~100 m before lookup and cached on disk. Turn this off to keep coordinates entirely local; the latitude and longitude attributes still work either way.",
+        "data": {
+          "reverse_geocode": "Reverse-geocode EXIF GPS coordinates via OpenStreetMap"
+        }
+      }
+    }
+  }
+}

custom_components/album_slideshow/switch.py

@@ -0,0 +1,55 @@
+from __future__ import annotations
+
+from homeassistant.components.switch import SwitchEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.restore_state import RestoreEntity
+
+from .const import DOMAIN
+from .store import SlideshowStore
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    store: SlideshowStore = hass.data[DOMAIN][entry.entry_id]["store"]
+    async_add_entities([PauseSwitch(entry, store)])
+
+
+class PauseSwitch(SwitchEntity, RestoreEntity):
+    _attr_has_entity_name = True
+    _attr_should_poll = False
+    _attr_icon = "mdi:pause"
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        self.entry = entry
+        self.store = store
+        self._attr_unique_id = f"{entry.entry_id}_paused"
+        self._attr_name = "Pause slideshow"
+
+    @property
+    def is_on(self) -> bool:
+        return bool(self.store.paused)
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+    async def async_turn_on(self, **kwargs) -> None:
+        self.store.paused = True
+        self.store.notify()
+
+    async def async_turn_off(self, **kwargs) -> None:
+        self.store.paused = False
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        self.store.add_listener(self.async_write_ha_state)
+        old = await self.async_get_last_state()
+        if old is not None and old.state in ("on", "off"):
+            self.store.paused = old.state == "on"
+            self.store.notify()

custom_components/album_slideshow/text.py

@@ -0,0 +1,60 @@
+from __future__ import annotations
+
+from homeassistant.components.text import TextEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.restore_state import RestoreEntity
+
+from .const import DOMAIN, DEFAULT_PAIR_DIVIDER_COLOR
+from .store import SlideshowStore
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback) -> None:
+    store: SlideshowStore = hass.data[DOMAIN][entry.entry_id]["store"]
+    async_add_entities([PairDividerColorText(entry, store)])
+
+
+class PairDividerColorText(TextEntity, RestoreEntity):
+    _attr_has_entity_name = True
+    _attr_should_poll = False
+    _attr_icon = "mdi:palette"
+    _attr_native_min = 1
+    _attr_native_max = 32
+
+    def __init__(self, entry: ConfigEntry, store: SlideshowStore) -> None:
+        self.entry = entry
+        self.store = store
+
+        self._attr_unique_id = f"{entry.entry_id}_pair_divider_color"
+        self._attr_name = "Pair divider color"
+
+        def _on_store_change() -> None:
+            self.async_write_ha_state()
+
+        store.add_listener(_on_store_change)
+
+    @property
+    def native_value(self) -> str:
+        return self.store.pair_divider_color
+
+    @property
+    def device_info(self):
+        return {
+            "identifiers": {(DOMAIN, self.entry.entry_id)},
+            "name": f"Album Slideshow {self.entry.title}",
+            "manufacturer": "Album Slideshow",
+        }
+
+    async def async_set_value(self, value: str) -> None:
+        val = (value or "").strip()
+        self.store.pair_divider_color = val or DEFAULT_PAIR_DIVIDER_COLOR
+        self.store.notify()
+
+    async def async_added_to_hass(self) -> None:
+        await super().async_added_to_hass()
+        self.store.add_listener(self.async_write_ha_state)
+        old = await self.async_get_last_state()
+        if old and old.state not in (None, "unknown", "unavailable"):
+            self.store.pair_divider_color = old.state.strip() or DEFAULT_PAIR_DIVIDER_COLOR
+            self.store.notify()

custom_components/album_slideshow/translations/en.json

@@ -0,0 +1,45 @@
+{
+  "config": {
+    "step": {
+      "user": {
+        "title": "Add album slideshow",
+        "description": "Choose a source for the slideshow.",
+        "data": {
+          "provider": "Source"
+        }
+      },
+      "google_shared": {
+        "title": "Google Photos",
+        "description": "Paste a Google Photos shared album share link.",
+        "data": {
+          "album_name": "Album name",
+          "album_url": "Shared album link"
+        }
+      },
+      "local_folder": {
+        "title": "Local Folder",
+        "description": "Pick a folder path on your Home Assistant filesystem. Use /local/... (maps to /config/www/...) or /media/local/... for NAS-mounted media folders. See the README for details.",
+        "data": {
+          "album_name": "Album name",
+          "local_path": "Folder path",
+          "recursive": "Include subfolders"
+        }
+      }
+    },
+    "error": {
+      "invalid_album_url": "That does not look like a Google Photos shared album link.",
+      "invalid_path": "Path is empty or invalid."
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Local Folder options",
+        "description": "Reverse geocoding sends your photos' EXIF GPS coordinates to the public OpenStreetMap Nominatim service to look up a human-readable place name. Coordinates are rounded to ~100 m before lookup and cached on disk. Turn this off to keep coordinates entirely local; the latitude and longitude attributes still work either way.",
+        "data": {
+          "reverse_geocode": "Reverse-geocode EXIF GPS coordinates via OpenStreetMap"
+        }
+      }
+    }
+  }
+}

custom_components/climate_scheduler/__init__.py

@@ -0,0 +1,405 @@
+"""The Climate Scheduler integration."""
+import logging
+import json
+import time
+from datetime import datetime, timedelta
+from pathlib import Path
+
+from homeassistant.config_entries import ConfigEntry
+from homeassistant import config_entries
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.typing import ConfigType
+from homeassistant.components.http import HomeAssistantView, StaticPathConfig
+from homeassistant.util import json as json_util
+from aiohttp import web
+
+from .const import DOMAIN, UPDATE_INTERVAL_SECONDS
+from .coordinator import HeatingSchedulerCoordinator
+from .storage import ScheduleStorage
+# Expose dynamic service descriptions for Home Assistant UI
+from .services import async_get_services  # noqa: E402,F401
+
+_LOGGER = logging.getLogger(__name__)
+
+
+async def _async_setup_common(hass: HomeAssistant) -> None:
+    """Common setup for storage, coordinator, services and panel."""
+    if DOMAIN not in hass.data:
+        hass.data[DOMAIN] = {}
+
+    # Initialize storage once
+    storage: ScheduleStorage | None = hass.data[DOMAIN].get("storage")
+    if storage is None:
+        storage = ScheduleStorage(hass)
+        await storage.async_load()
+        hass.data[DOMAIN]["storage"] = storage
+
+    # Initialize coordinator once
+    coordinator: HeatingSchedulerCoordinator | None = hass.data[DOMAIN].get("coordinator")
+    if coordinator is None:
+        coordinator = HeatingSchedulerCoordinator(
+            hass,
+            storage,
+            timedelta(seconds=UPDATE_INTERVAL_SECONDS)
+        )
+        hass.data[DOMAIN]["coordinator"] = coordinator
+
+        # Start coordinator updates
+        _LOGGER.info(f"Starting coordinator with {UPDATE_INTERVAL_SECONDS}s update interval")
+        await coordinator.async_refresh()
+        _LOGGER.info("Forcing initial temperature sync for all entities")
+        await coordinator.force_update_all()
+
+        # Schedule periodic updates
+        async def _scheduled_update(now):
+            """Handle scheduled update."""
+            await coordinator.async_request_refresh()
+
+        from homeassistant.helpers.event import async_track_time_interval
+        async_track_time_interval(
+            hass,
+            _scheduled_update,
+            timedelta(seconds=UPDATE_INTERVAL_SECONDS)
+        )
+
+    # Avoid re-registering services, but be robust across updates/reloads.
+    # During an in-process reload/upgrade, `hass.data` can persist while new
+    # services from a newer version are missing. If so, re-register.
+    if hass.data[DOMAIN].get("services_registered"):
+        # Keep this list in sync with the services registered in `services.py`.
+        expected_services = (
+            "recreate_all_sensors",
+            "cleanup_malformed_sensors",
+            "set_schedule",
+            "get_schedule",
+            "clear_schedule",
+            "enable_schedule",
+            "disable_schedule",
+            "set_ignored",
+            "sync_all",
+            "create_group",
+            "delete_group",
+            "rename_group",
+            "add_to_group",
+            "remove_from_group",
+            "get_groups",
+            "list_groups",
+            "list_profiles",
+            "set_group_schedule",
+            "enable_group",
+            "disable_group",
+            "get_settings",
+            "save_settings",
+            "reload_integration",
+            "advance_schedule",
+            "advance_group",
+            "cancel_advance",
+            "get_advance_status",
+            "clear_advance_history",
+            "test_fire_event",
+            "create_profile",
+            "delete_profile",
+            "rename_profile",
+            "set_active_profile",
+            "get_profiles",
+            "cleanup_derivative_sensors",
+            "factory_reset",
+            "reregister_card",
+            "diagnostics",
+        )
+        missing = [s for s in expected_services if not hass.services.has_service(DOMAIN, s)]
+        if not missing:
+            # Services are already registered; still ensure frontend resources
+            # are registered/updated (important after install/upgrade or when
+            # Lovelace wasn't ready earlier during startup).
+            await _register_frontend_resources(hass)
+            return
+        _LOGGER.warning(
+            "Climate Scheduler services flagged as registered but missing %s; re-registering services",
+            missing,
+        )
+        hass.data[DOMAIN]["services_registered"] = False
+
+    # Register services from services module  
+    from . import services as service_module
+    await service_module.async_setup_services(hass)
+
+    hass.data[DOMAIN]["services_registered"] = True
+
+    # Register frontend card resources
+    await _register_frontend_resources(hass)
+
+
+async def _register_frontend_resources(hass: HomeAssistant) -> None:
+    """Register the bundled frontend card as a Lovelace resource."""
+    # Get version from manifest.json first
+    manifest_path = Path(__file__).parent / "manifest.json"
+    try:
+        import json
+        manifest_text = await hass.async_add_executor_job(manifest_path.read_text)
+        manifest = json.loads(manifest_text)
+        frontend_version = manifest.get("version", f"u{int(time.time())}")
+        _LOGGER.debug("Current integration version: %s", frontend_version)
+    except Exception as e:
+        _LOGGER.warning("Failed to read manifest version: %s", e)
+        frontend_version = f"u{int(time.time())}"
+    
+    # Always attempt to (re)register frontend resources on startup/update.
+    # We intentionally do not short-circuit when the stored version matches
+    # the current one, because we want to remove any existing resource
+    # entries and recreate them during install/update/reboot.
+
+    # Register static path for frontend files
+    frontend_path = Path(__file__).parent / "frontend"
+    if not frontend_path.exists():
+        _LOGGER.warning("Frontend directory not found at %s", frontend_path)
+        return
+
+    # Register the static path using the correct HA API.
+    # This only needs to happen once per HA runtime; avoid repeated registration
+    # and noisy logs when config entries reload.
+    should_cache = False
+    if not hass.data[DOMAIN].get("frontend_static_registered"):
+        # Expose at /<domain>/static so integrations can reliably reference it
+        await hass.http.async_register_static_paths([
+            StaticPathConfig(f"/{DOMAIN}/static", str(frontend_path), should_cache)
+        ])
+        hass.data[DOMAIN]["frontend_static_registered"] = True
+        _LOGGER.info("Registered frontend static path: %s -> %s", f"/{DOMAIN}/static", frontend_path)
+    else:
+        _LOGGER.debug("Frontend static path already registered")
+
+    # Register Lovelace resource
+    try:
+        # Get lovelace resources
+        lovelace_data = hass.data.get("lovelace")
+        if lovelace_data is None:
+            _LOGGER.warning("Lovelace integration not available, card will need manual registration")
+            hass.data[DOMAIN]["frontend_registered_version"] = frontend_version
+            return
+
+        # Get resources based on HA version
+        from homeassistant.const import __version__ as ha_version
+        version_parts = [int(x) for x in ha_version.split(".")[:2]]
+        version_number = version_parts[0] * 1000 + version_parts[1]
+        
+        if version_number >= 2025002:  # 2025.2.0 and later
+            resources = lovelace_data.resources
+        else:
+            resources = lovelace_data.get("resources")
+
+        if resources is None:
+            _LOGGER.warning("Lovelace resources not available, card will need manual registration")
+            return
+
+        # Check for YAML mode
+        if not hasattr(resources, "store") or resources.store is None:
+            _LOGGER.info("Lovelace YAML mode detected, card must be registered manually")
+            
+            # Check if the card is already registered in YAML
+            base_url = f"/{DOMAIN}/static/climate-scheduler-card.js"
+            card_already_registered = False
+            
+            try:
+                for entry in resources.async_items():
+                    entry_url = entry.get("url", "")
+                    entry_base_url = entry_url.split("?")[0]
+                    if entry_base_url == base_url:
+                        card_already_registered = True
+                        _LOGGER.info("Card is already registered in YAML configuration")
+                        # Dismiss any existing notification since card is now present
+                        await hass.services.async_call(
+                            "persistent_notification",
+                            "dismiss",
+                            {"notification_id": f"{DOMAIN}_yaml_mode"},
+                        )
+                        break
+            except Exception as e:
+                _LOGGER.debug("Could not check YAML resources: %s", e)
+            
+            # Only create notification if card is NOT registered
+            if not card_already_registered:
+                _LOGGER.warning("Card is not registered in YAML configuration - notification will be created")
+                await hass.services.async_call(
+                    "persistent_notification",
+                    "create",
+                    {
+                        "notification_id": f"{DOMAIN}_yaml_mode",
+                        "title": "Climate Scheduler: Manual Card Registration Required",
+                        "message": (
+                            "Your Lovelace dashboard is configured via YAML mode. "
+                            "The Climate Scheduler card cannot be auto-registered.\n\n"
+                            "**To add the card manually:**\n\n"
+                            "Add this to your Lovelace resources configuration:\n\n"
+                            f"```yaml\n"
+                            f"lovelace:\n"
+                            f"  mode: yaml\n"
+                            f"  resources:\n"
+                            f"    - url: /{DOMAIN}/static/climate-scheduler-card.js?v={frontend_version}\n"
+                            f"      type: module\n"
+                            f"```\n\n"
+                            "Then restart Home Assistant and refresh your browser."
+                        ),
+                    },
+                )
+            return
+
+        # Ensure resources are loaded
+        if not resources.loaded:
+            await resources.async_load()
+
+        # Build URL with version for cache busting
+        # Use the integration-hosted static path we just registered
+        base_url = f"/{DOMAIN}/static/climate-scheduler-card.js"
+        url = f"{base_url}?v={frontend_version}"
+        
+        # Check for old standalone card installations and remove them
+        old_card_patterns = [
+            "/hacsfiles/climate-scheduler/",
+            "/local/community/climate-scheduler/",
+            "climate-scheduler-card.js",
+            f"/{DOMAIN}/static/"
+        ]
+        
+        existing_entry = None
+        removed_old = False
+        for entry in list(resources.async_items()):
+            entry_url = entry["url"]
+            entry_base_url = entry_url.split("?")[0]
+            
+            # Check if this is our new bundled card
+            if entry_base_url == base_url:
+                existing_entry = entry
+                continue
+            
+            # Check if this is an old standalone card installation
+            if any(pattern in entry_url for pattern in old_card_patterns):
+                _LOGGER.info("Removing old standalone card registration: %s", entry_url)
+                await resources.async_delete_item(entry["id"])
+                removed_old = True
+
+        # If there's an existing bundled registration, remove it first so
+        # we always create a fresh entry (ensures consistent behavior on
+        # install/update/reboot and avoids stale IDs or metadata).
+        if existing_entry:
+            try:
+                _LOGGER.info("Removing existing bundled frontend card registration: %s", existing_entry.get("url"))
+                await resources.async_delete_item(existing_entry["id"])
+            except Exception:  # noqa: BLE001
+                _LOGGER.debug("Failed to remove existing bundled frontend resource, will attempt to (re)create it")
+
+        # Create a new resource entry for the bundled card
+        if hasattr(resources, "async_create_item"):
+            await resources.async_create_item({"res_type": "module", "url": url})
+            
+            if removed_old:
+                _LOGGER.info("Successfully migrated to bundled frontend card (version %s)", frontend_version)
+            else:
+                _LOGGER.info("Successfully registered bundled frontend card (version %s)", frontend_version)
+        else:
+            _LOGGER.warning("Cannot auto-register card: Lovelace resources are in YAML mode")
+        
+        # Note: Version mismatch detection and refresh notification is handled by the frontend
+        # JavaScript, which can accurately detect when the browser cache is stale
+
+    except Exception as err:
+        _LOGGER.error("Failed to auto-register frontend card: %s", err)
+    
+    # Store the version we just registered
+    hass.data[DOMAIN]["frontend_registered_version"] = frontend_version
+
+
+async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
+    """Set up via YAML by importing into a config entry, else no-op."""
+    if DOMAIN in config:
+        # Import legacy YAML into a config entry
+        hass.async_create_task(
+            hass.config_entries.flow.async_init(
+                DOMAIN, context={"source": config_entries.SOURCE_IMPORT}
+            )
+        )
+    return True
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Set up Climate Scheduler from a config entry."""
+    await _async_setup_common(hass)
+    
+    # Get current version from manifest
+    manifest_path = Path(__file__).parent / "manifest.json"
+    current_version = None
+    try:
+        manifest_text = await hass.async_add_executor_job(manifest_path.read_text)
+        manifest = json.loads(manifest_text)
+        current_version = manifest.get("version")
+    except Exception as e:
+        _LOGGER.warning("Failed to read manifest version: %s", e)
+    
+    # Check if this is first install or an upgrade
+    stored_version = entry.data.get("version")
+    is_first_install = stored_version is None
+    is_upgrade = stored_version is not None and current_version != stored_version
+    
+    # Update version in config entry if changed
+    if current_version and (is_first_install or is_upgrade):
+        new_data = dict(entry.data)
+        new_data["version"] = current_version
+        hass.config_entries.async_update_entry(entry, data=new_data)
+        
+        if is_first_install:
+            _LOGGER.info("First install detected (version %s) - will reload integration after setup", current_version)
+        elif is_upgrade:
+            _LOGGER.info("Upgrade detected (%s -> %s) - will reload integration after setup", stored_version, current_version)
+    
+    # Forward entry setup to sensor, climate, and switch platforms
+    await hass.config_entries.async_forward_entry_setups(entry, ["sensor", "climate", "switch"])
+    
+    # Reload integration after first install or upgrade to ensure UI is properly initialized
+    if is_first_install or is_upgrade:
+        async def _delayed_reload():
+            """Reload integration after a short delay to allow setup to complete."""
+            await asyncio.sleep(2)  # Wait for platforms to fully initialize
+            try:
+                _LOGGER.info("Performing post-setup reload to initialize UI")
+                await hass.config_entries.async_reload(entry.entry_id)
+            except Exception as e:
+                _LOGGER.warning("Post-setup reload failed: %s", e)
+        
+        import asyncio
+        hass.async_create_task(_delayed_reload())
+    
+    return True
+
+
+async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Unload a config entry."""
+    # Unload all platforms
+    unload_ok = await hass.config_entries.async_unload_platforms(entry, ["sensor", "climate", "switch"])
+    
+    # Remove panel and services only if this is the last entry
+    entries = hass.config_entries.async_entries(DOMAIN)
+    if len(entries) <= 1:
+        _LOGGER.debug("[BACKEND] Unloading last config entry - removing all services (including set_group_schedule)")
+        # Unregister services
+        for svc in [
+            "set_schedule","get_schedule","clear_schedule","enable_schedule","disable_schedule",
+            "sync_all","create_group","delete_group","add_to_group","remove_from_group",
+            "get_groups","set_group_schedule","enable_group","disable_group","get_settings",
+            "save_settings","reload_integration","advance_schedule","advance_group",
+            "cancel_advance","get_advance_status","clear_advance_history","test_fire_event","create_profile",
+            "delete_profile","rename_profile","set_active_profile","get_profiles",
+            "cleanup_derivative_sensors","factory_reset"
+        ]:
+            try:
+                hass.services.async_remove(DOMAIN, svc)
+                if svc == "set_group_schedule":
+                    _LOGGER.debug("[BACKEND] Removed service: set_group_schedule")
+            except Exception:  # noqa: BLE001
+                pass
+        _LOGGER.info("[BACKEND] All services removed during unload")
+        hass.data.pop(DOMAIN, None)
+    else:
+        _LOGGER.info("[BACKEND] Unloading entry but keeping services (not last entry)")
+    
+    return unload_ok
+

custom_components/climate_scheduler/climate.py

@@ -0,0 +1,481 @@
+"""Climate platform for Climate Scheduler."""
+import asyncio
+import logging
+from typing import Any, Dict, List, Optional
+from datetime import datetime, timedelta, time
+
+from homeassistant.components.climate import (
+    ClimateEntity,
+    ClimateEntityFeature,
+    HVACMode,
+    HVACAction,
+)
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import ATTR_TEMPERATURE, UnitOfTemperature
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+from homeassistant.util.unit_conversion import TemperatureConverter
+
+from .const import DOMAIN
+from .coordinator import HeatingSchedulerCoordinator
+from .storage import ScheduleStorage
+
+_LOGGER = logging.getLogger(__name__)
+
+__all__ = ["async_setup_entry", "ClimateSchedulerGroupEntity"]
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up Climate Scheduler climate entities from a config entry."""
+    storage: ScheduleStorage = hass.data[DOMAIN]["storage"]
+    coordinator: HeatingSchedulerCoordinator = hass.data[DOMAIN]["coordinator"]
+    
+    # Get all groups - create climate cards for all groups with entities
+    groups = await storage.async_get_groups()
+    entities = []
+    groups_normalized = False
+    
+    for group_name, group_data in groups.items():
+        # Normalize _is_single_entity_group flag based on actual entity count
+        # This fixes inconsistency where groups with 1 entity might not have the flag set
+        entity_count = len(group_data.get("entities", []))
+        is_single_entity = entity_count == 1
+        has_flag = group_data.get("_is_single_entity_group", False)
+        
+        # If flag doesn't match actual entity count, normalize it
+        if is_single_entity != has_flag:
+            group_data["_is_single_entity_group"] = is_single_entity
+            groups_normalized = True
+            _LOGGER.info(
+                f"Normalized _is_single_entity_group flag for group '{group_name}': "
+                f"entity_count={entity_count}, flag={is_single_entity}"
+            )
+        
+        # Skip virtual groups (no entities) - but include all groups with at least one entity
+        if entity_count == 0:
+            continue
+        
+        # Create climate entity for this group (including single-entity groups)
+        entities.append(
+            ClimateSchedulerGroupEntity(
+                coordinator,
+                storage,
+                group_name,
+                group_data,
+            )
+        )
+        _LOGGER.info(f"Created climate entity for group '{group_name}' with {entity_count} entities")
+    
+    # Save normalized flags if any were updated
+    if groups_normalized:
+        await storage.async_save()
+        _LOGGER.info("Saved normalized group flags to storage")
+    
+    if entities:
+        async_add_entities(entities, True)
+        _LOGGER.info(f"Added {len(entities)} climate scheduler group entities")
+
+
+class ClimateSchedulerGroupEntity(CoordinatorEntity, ClimateEntity):
+    """Climate entity representing a schedule group."""
+
+    _attr_has_entity_name = True
+
+    def __init__(
+        self,
+        coordinator: HeatingSchedulerCoordinator,
+        storage: ScheduleStorage,
+        group_name: str,
+        group_data: Dict[str, Any],
+    ) -> None:
+        """Initialize the climate entity."""
+        super().__init__(coordinator)
+        
+        self._storage = storage
+        self._group_name = group_name
+        self._attr_has_entity_name = True
+        self._attr_name = f"Climate Schedule {group_name}"
+        self._attr_unique_id = f"climate_scheduler_group_{group_name.lower().replace(' ', '_')}"
+        
+        # Climate entity configuration - will be set when added to hass
+        self._attr_temperature_unit = UnitOfTemperature.CELSIUS  # Default, updated in async_added_to_hass
+        self._attr_supported_features = (
+            ClimateEntityFeature.TARGET_TEMPERATURE |
+            ClimateEntityFeature.TURN_ON |
+            ClimateEntityFeature.TURN_OFF |
+            ClimateEntityFeature.PRESET_MODE
+        )
+        
+        # Temperature control settings
+        self._attr_min_temp = 5.0
+        self._attr_max_temp = 35.0
+        self._attr_target_temp_step = 0.5
+        
+        # Simplified modes: Auto (Active - follows schedule) or Off (Idle)
+        self._attr_hvac_modes = [
+            HVACMode.AUTO,  # Active - follows schedule
+            HVACMode.OFF,   # Idle - turns off members
+        ]
+        
+        # Preset modes from profiles
+        profiles = group_data.get("profiles", {})
+        self._attr_preset_modes = list(profiles.keys()) if profiles else []
+        self._attr_preset_mode = group_data.get("active_profile", "Default")
+        
+        # State tracking
+        self._member_entities: List[str] = group_data.get("entities", [])
+        self._enabled: bool = group_data.get("enabled", True)
+        self._attr_current_temperature: Optional[float] = None
+        self._attr_target_temperature: Optional[float] = None
+        self._attr_hvac_mode: Optional[HVACMode] = HVACMode.AUTO if self._enabled else HVACMode.OFF
+        self._attr_hvac_action: Optional[HVACAction] = None  # Will be set in _update_state
+        
+        # Cache for attributes
+        self._active_node: Optional[Dict[str, Any]] = None
+        self._next_node: Optional[Dict[str, Any]] = None
+        self._member_temps: Dict[str, float] = {}
+    
+    async def async_added_to_hass(self) -> None:
+        """When entity is added to hass, set temperature unit from system config."""
+        await super().async_added_to_hass()
+        # Use the same approach as storage.py - get temperature unit from system config
+        self._attr_temperature_unit = self.hass.config.units.temperature_unit
+        
+        # Set temperature step from first member entity if available
+        if self._member_entities:
+            first_member = self.hass.states.get(self._member_entities[0])
+            if first_member:
+                member_step = first_member.attributes.get("target_temp_step", 0.5)
+                self._attr_target_temp_step = member_step
+        
+        _LOGGER.debug(
+            "Climate entity %s initialized with temperature unit: %s, step: %s",
+            self.entity_id,
+            self._attr_temperature_unit,
+            self._attr_target_temp_step,
+        )
+        # Perform initial state update
+        self._update_state()
+        
+    @property
+    def unique_id(self) -> str:
+        """Return unique ID."""
+        return self._attr_unique_id
+    
+    @property
+    def device_info(self):
+        """Return device info to link this entity to the Climate Scheduler integration."""
+        return {
+            "identifiers": {(DOMAIN, "climate_scheduler")},
+            "name": "Climate Scheduler",
+            "manufacturer": "Climate Scheduler",
+            "model": "Schedule Manager",
+        }
+    
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        # Update enabled state and profiles from storage
+        group_data = self._storage._data.get("groups", {}).get(self._group_name)
+        if group_data:
+            self._enabled = group_data.get("enabled", True)
+            profiles = group_data.get("profiles", {})
+            self._attr_preset_modes = list(profiles.keys()) if profiles else []
+            self._attr_preset_mode = group_data.get("active_profile", "Default")
+            # Update HVAC mode based on enabled state
+            self._attr_hvac_mode = HVACMode.AUTO if self._enabled else HVACMode.OFF
+        self._update_state()
+        self.async_write_ha_state()
+    
+    def _update_state(self) -> None:
+        """Update entity state from member entities and schedule."""
+        # 1. Calculate average current temperature from members (in their native unit)
+        temps = []
+        temp_map = {}
+        
+        for entity_id in self._member_entities:
+            state = self.hass.states.get(entity_id)
+            if state and state.attributes.get("current_temperature") is not None:
+                try:
+                    temp = float(state.attributes["current_temperature"])
+                    # Store temperature in its native unit, no conversion
+                    temps.append(temp)
+                    temp_map[entity_id] = round(temp, 1)
+                except (ValueError, TypeError):
+                    pass
+        
+        if temps:
+            self._attr_current_temperature = round(sum(temps) / len(temps), 1)
+        else:
+            self._attr_current_temperature = None
+        
+        self._member_temps = temp_map
+        
+        # 2. Check if any member is actively requesting heat/cool and determine overall action
+        heating_count = 0
+        cooling_count = 0
+        for entity_id in self._member_entities:
+            state = self.hass.states.get(entity_id)
+            if state:
+                hvac_action = state.attributes.get("hvac_action")
+                if hvac_action == "heating":
+                    heating_count += 1
+                elif hvac_action == "cooling":
+                    cooling_count += 1
+        
+        # Set hvac_action based on member states and enabled status
+        if not self._enabled:
+            self._attr_hvac_action = HVACAction.OFF
+        elif heating_count > 0:
+            self._attr_hvac_action = HVACAction.HEATING
+        elif cooling_count > 0:
+            self._attr_hvac_action = HVACAction.COOLING
+        else:
+            self._attr_hvac_action = HVACAction.IDLE
+        
+        # 3. Get active node from schedule to determine setpoint
+        current_time = datetime.now().time()
+        current_day = datetime.now().strftime('%a').lower()
+        
+        # Get the schedule data from storage (synchronously accessible)
+        group_data = self._storage._data.get("groups", {}).get(self._group_name, {})
+        schedule_mode = group_data.get("schedule_mode", "all_days")
+        schedules = group_data.get("schedules", {})
+        
+        # Get nodes for current day using the same logic as coordinator
+        if schedule_mode == "all_days":
+            nodes = schedules.get("all_days", [])
+        elif schedule_mode == "5/2":
+            if current_day in ["mon", "tue", "wed", "thu", "fri"]:
+                nodes = schedules.get("weekday", [])
+            else:
+                nodes = schedules.get("weekend", [])
+        else:  # individual
+            nodes = schedules.get(current_day, [])
+        
+        # In individual or 5/2 mode, if current time is before all nodes today,
+        # use previous day's last node
+        if schedule_mode in ["individual", "5/2"] and nodes:
+            sorted_nodes = sorted(nodes, key=lambda n: self._storage._time_to_minutes(n["time"]))
+            current_minutes = current_time.hour * 60 + current_time.minute
+            if sorted_nodes and current_minutes < self._storage._time_to_minutes(sorted_nodes[0]["time"]):
+                # We're before the first node of today, need previous day/period's last node
+                days_of_week = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun']
+                current_day_index = days_of_week.index(current_day)
+                prev_day = days_of_week[(current_day_index - 1) % 7]
+                
+                # Get previous day's nodes based on schedule mode
+                if schedule_mode == "5/2":
+                    # In 5/2 mode, determine if previous day is weekday or weekend
+                    if prev_day in ["mon", "tue", "wed", "thu", "fri"]:
+                        prev_day_nodes = schedules.get("weekday", [])
+                    else:
+                        prev_day_nodes = schedules.get("weekend", [])
+                else:
+                    # In individual mode, use specific day
+                    prev_day_nodes = schedules.get(prev_day, [])
+                
+                if prev_day_nodes:
+                    sorted_prev_nodes = sorted(prev_day_nodes, key=lambda n: self._storage._time_to_minutes(n["time"]))
+                    last_prev_node = sorted_prev_nodes[-1]
+                    # Prepend previous day's last node with time "00:00"
+                    carryover_node = {**last_prev_node, "time": "00:00"}
+                    nodes = [carryover_node] + nodes
+        
+        # Determine the active setpoint from schedule
+        active_setpoint = None
+        if nodes:
+            active_node = self._storage.get_active_node(nodes, current_time)
+            if active_node:
+                active_setpoint = active_node.get("temp")
+                _LOGGER.debug(f"Active node for {self._group_name}: temp={active_setpoint}")
+            else:
+                _LOGGER.debug(f"No active node for {self._group_name} at {current_time}")
+        else:
+            _LOGGER.debug(f"No schedule data for {self._group_name} on {current_day}")
+        
+        # Show the scheduled setpoint as target temperature, or use a default
+        if active_setpoint is not None:
+            self._attr_target_temperature = active_setpoint
+        else:
+            # Fallback: use average of member target temps, or 20°C default
+            member_targets = []
+            for entity_id in self._member_entities:
+                state = self.hass.states.get(entity_id)
+                if state and state.attributes.get("temperature") is not None:
+                    try:
+                        member_targets.append(float(state.attributes["temperature"]))
+                    except (ValueError, TypeError):
+                        pass
+            
+            if member_targets:
+                self._attr_target_temperature = round(sum(member_targets) / len(member_targets), 1)
+            else:
+                self._attr_target_temperature = 20.0  # Default fallback
+            
+            _LOGGER.debug(f"No schedule setpoint for {self._group_name}, using fallback: {self._attr_target_temperature}")
+        
+        # HVAC mode reflects enabled state (not member states)
+        # This is already set in _handle_coordinator_update
+        
+        self._active_node = None
+        self._next_node = None
+    
+    def _map_hvac_mode(self, mode_str: str) -> HVACMode:
+        """Map string hvac_mode to HVACMode enum."""
+        mapping = {
+            "off": HVACMode.OFF,
+            "heat": HVACMode.HEAT,
+            "cool": HVACMode.COOL,
+            "heat_cool": HVACMode.HEAT_COOL,
+            "auto": HVACMode.AUTO,
+            "dry": HVACMode.DRY,
+            "fan_only": HVACMode.FAN_ONLY,
+        }
+        return mapping.get(mode_str.lower() if mode_str else "heat", HVACMode.HEAT)
+    
+    @property
+    def extra_state_attributes(self) -> Dict[str, Any]:
+        """Return entity specific state attributes."""
+        attrs = {
+            "member_entities": self._member_entities,
+            "member_count": len(self._member_entities),
+            "group_name": self._group_name,
+            "schedule_enabled": self._enabled,
+        }
+        
+        # Add member temperatures if available
+        if self._member_temps:
+            attrs["member_temperatures"] = self._member_temps
+        
+        # Placeholder for future phases - active node info
+        if self._active_node:
+            attrs["active_node"] = {
+                "time": self._active_node.get("time"),
+                "temp": self._active_node.get("temp"),
+                "hvac_mode": self._active_node.get("hvac_mode"),
+            }
+        
+        if self._next_node:
+            attrs["next_node"] = {
+                "time": self._next_node.get("time"),
+                "temp": self._next_node.get("temp"),
+                "hvac_mode": self._next_node.get("hvac_mode"),
+            }
+        
+        return attrs
+    
+    async def async_set_temperature(self, **kwargs) -> None:
+        """Set new target temperature for all member entities."""
+        temperature = kwargs.get("temperature")
+        if temperature is None:
+            _LOGGER.warning("No temperature provided to async_set_temperature")
+            return
+        
+        # Apply temperature to all member entities
+        for entity_id in self._member_entities:
+            try:
+                await self.hass.services.async_call(
+                    "climate",
+                    "set_temperature",
+                    {
+                        "entity_id": entity_id,
+                        "temperature": temperature,
+                    },
+                    blocking=True,
+                )
+                _LOGGER.info(f"Set temperature {temperature} for {entity_id}")
+            except Exception as e:
+                _LOGGER.error(f"Failed to set temperature for {entity_id}: {e}")
+        
+        # Set override for each member until next scheduled node
+        current_time = datetime.now().time()
+        current_day = datetime.now().strftime('%a').lower()
+        
+        group_data = self._storage._data.get("groups", {}).get(self._group_name, {})
+        schedules = group_data.get("schedules", {})
+        schedule_data = schedules.get(current_day)
+        
+        if schedule_data and "nodes" in schedule_data:
+            nodes = schedule_data["nodes"]
+            next_node = self._storage.get_next_node(nodes, current_time)
+            if next_node:
+                # Calculate when override expires (at next node time)
+                next_node_time_str = next_node["time"]
+                next_node_hours, next_node_minutes = map(int, next_node_time_str.split(":"))
+                override_until = datetime.now().replace(
+                    hour=next_node_hours, 
+                    minute=next_node_minutes, 
+                    second=0, 
+                    microsecond=0
+                )
+                # If next node time is earlier in the day than current time, it's tomorrow
+                if override_until <= datetime.now():
+                    override_until += timedelta(days=1)
+                
+                # Set override for all members
+                for entity_id in self._member_entities:
+                    self.coordinator.override_until[entity_id] = override_until
+                
+                _LOGGER.info(
+                    f"Set manual override for group {self._group_name} until {override_until}"
+                )
+        
+        # Update target temperature immediately and trigger state refresh
+        self._attr_target_temperature = temperature
+        
+        # Schedule a state update after a short delay to allow member entities to react
+        async def delayed_update():
+            await asyncio.sleep(2)  # Wait for members to start heating
+            self._update_state()
+            self.async_write_ha_state()
+        
+        self.hass.async_create_task(delayed_update())
+        self.async_write_ha_state()
+    
+    async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
+        """Set HVAC mode - AUTO (active) or OFF (idle)."""
+        if hvac_mode == HVACMode.OFF:
+            # Turn off schedule (idle mode)
+            await self.async_turn_off()
+        elif hvac_mode == HVACMode.AUTO:
+            # Turn on schedule (active mode)
+            await self.async_turn_on()
+        else:
+            _LOGGER.warning(f"Unsupported HVAC mode {hvac_mode} for climate scheduler group")
+    
+    async def async_set_preset_mode(self, preset_mode: str) -> None:
+        """Set the preset mode (profile) for this group."""
+        try:
+            await self._storage.async_set_active_profile(self._group_name, preset_mode)
+        except ValueError as err:
+            _LOGGER.error(f"Profile switch failed for group {self._group_name}: {err}")
+            return
+        
+        # Force coordinator refresh to apply new schedule immediately
+        await self.coordinator.async_request_refresh()
+        
+        _LOGGER.info(f"Set profile {preset_mode} for group {self._group_name}")
+    
+    async def async_turn_on(self) -> None:
+        """Enable the schedule."""
+        # Enable schedule for all member entities
+        for entity_id in self._member_entities:
+            await self._storage.async_set_enabled(entity_id, True)
+        self._enabled = True
+        self.async_write_ha_state()
+        _LOGGER.info("Enabled schedule for group %s", self._group_name)
+    
+    async def async_turn_off(self) -> None:
+        """Disable the schedule."""
+        # Disable schedule for all member entities
+        for entity_id in self._member_entities:
+            await self._storage.async_set_enabled(entity_id, False)
+        self._enabled = False
+        self.async_write_ha_state()
+        _LOGGER.info("Disabled schedule for group %s", self._group_name)

custom_components/climate_scheduler/config_flow.py

@@ -0,0 +1,28 @@
+from __future__ import annotations
+
+import voluptuous as vol
+from homeassistant import config_entries
+from homeassistant.core import HomeAssistant
+
+from .const import DOMAIN
+
+
+class ClimateSchedulerConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
+    VERSION = 1
+
+    async def async_step_user(self, user_input: dict | None = None):
+        # Only allow a single entry
+        if self._async_current_entries():
+            return self.async_abort(reason="already_configured")
+
+        if user_input is not None:
+            return self.async_create_entry(title="Climate Scheduler", data={})
+
+        # No options to configure — empty form confirms creation
+        return self.async_show_form(step_id="user", data_schema=vol.Schema({}))
+
+    async def async_step_import(self, user_input: dict | None = None):
+        # Support YAML import for backward compatibility
+        if self._async_current_entries():
+            return self.async_abort(reason="already_configured")
+        return self.async_create_entry(title="Climate Scheduler", data={})

custom_components/climate_scheduler/const.py

@@ -0,0 +1,24 @@
+"""Constants for the Climate Scheduler integration."""
+
+DOMAIN = "climate_scheduler"
+
+# Storage
+STORAGE_VERSION = 1
+STORAGE_KEY = "climate_scheduler_data"
+
+# Default schedule nodes (time in HH:MM format, temp in Celsius)
+DEFAULT_SCHEDULE = []
+
+# Temperature settings (in Celsius)
+MIN_TEMP = 5.0
+MAX_TEMP = 30.0
+NO_CHANGE_TEMP = None  # Special value to indicate temperature should not be changed
+
+# Update interval
+UPDATE_INTERVAL_SECONDS = 60  # Check schedules every minute
+# Settings keys
+SETTING_USE_WORKDAY = "use_workday_integration"  # Whether to use Workday integration for 5/2 scheduling
+SETTING_WORKDAYS = "workdays"  # List of days considered workdays (e.g., ["mon", "tue", "wed", "thu", "fri"])
+
+# Default workdays (Monday through Friday)
+DEFAULT_WORKDAYS = ["mon", "tue", "wed", "thu", "fri"]

custom_components/climate_scheduler/frontend/.version

@@ -0,0 +1 @@
+1.15.1

custom_components/climate_scheduler/frontend/ha-api.js

@@ -0,0 +1,673 @@
+/**
+ * Home Assistant API Integration
+ * Handles communication with Home Assistant via WebSocket API
+ * Supports both custom panel mode (using hass object) and iframe mode (WebSocket)
+ */
+
+class HomeAssistantAPI {
+    constructor() {
+        this.connection = null;
+        this.messageId = 1;
+        this.pendingRequests = new Map();
+        this.stateUpdateCallbacks = [];
+        this.hass = null; // For custom panel mode
+        this.usingHassObject = false; // Track which mode we're in
+    }
+    
+    /**
+     * Set hass object (custom panel mode)
+     */
+    setHassObject(hass) {
+        this.hass = hass;
+        this.usingHassObject = true;
+    }
+    
+    async connect() {
+        // If we already have a hass object, we're in custom panel mode
+        if (this.hass && this.usingHassObject) {
+            console.log('Using existing hass connection from custom panel');
+            return Promise.resolve();
+        }
+        
+        try {
+            // Get auth token - works in both browser and mobile app
+            const authToken = await this.getAuthToken();
+            
+            // Connect to Home Assistant WebSocket API
+            // Use relative path for mobile app compatibility
+            const protocol = window.location.protocol === 'https:' ? 'wss:' : 'ws:';
+            const host = window.location.host;
+            const wsUrl = `${protocol}//${host}/api/websocket`;
+            
+            this.connection = new WebSocket(wsUrl);
+            
+            return new Promise((resolve, reject) => {
+                this.connection.onopen = () => {
+                    console.log('WebSocket connected');
+                };
+                
+                this.connection.onmessage = (event) => {
+                    const message = JSON.parse(event.data);
+                    this.handleMessage(message, authToken, resolve, reject);
+                };
+                
+                this.connection.onerror = (error) => {
+                    console.error('WebSocket error:', error);
+                    reject(error);
+                };
+                
+                this.connection.onclose = () => {
+                    console.log('WebSocket disconnected');
+                };
+            });
+        } catch (error) {
+            console.error('Failed to connect:', error);
+            throw error;
+        }
+    }
+    
+    handleMessage(message, authToken, resolveConnection, rejectConnection) {
+        if (message.type === 'auth_required') {
+            // Send authentication
+            this.send({
+                type: 'auth',
+                access_token: authToken
+            });
+        } else if (message.type === 'auth_ok') {
+            console.log('Authenticated successfully');
+            resolveConnection();
+        } else if (message.type === 'auth_invalid') {
+            console.error('Authentication failed');
+            rejectConnection(new Error('Authentication failed'));
+        } else if (message.type === 'result') {
+            // Handle response to our request
+            const pending = this.pendingRequests.get(message.id);
+            if (pending) {
+                if (message.success) {
+                    pending.resolve(message.result);
+                } else {
+                    pending.reject(message.error);
+                }
+                this.pendingRequests.delete(message.id);
+            }
+        } else if (message.type === 'event') {
+            // Handle state change events
+            if (message.event && message.event.event_type === 'state_changed') {
+                this.notifyStateUpdate(message.event.data);
+            }
+        }
+    }
+    
+    async getAuthToken() {
+        // Method 1: Check if running in Home Assistant panel context (works in mobile app)
+        if (window.hassConnection) {
+            try {
+                const auth = await window.hassConnection;
+                if (auth && auth.auth && auth.auth.data && auth.auth.data.access_token) {
+                    return auth.auth.data.access_token;
+                }
+            } catch (e) {
+                console.warn('Could not get token from hassConnection:', e);
+            }
+        }
+        
+        // Method 2: Try to get from parent window context
+        if (window.parent && window.parent.hassConnection && window.parent !== window) {
+            try {
+                const auth = await window.parent.hassConnection;
+                if (auth && auth.auth && auth.auth.data && auth.auth.data.access_token) {
+                    return auth.auth.data.access_token;
+                }
+            } catch (e) {
+                console.warn('Could not get token from parent.hassConnection:', e);
+            }
+        }
+        
+        // Method 3: Fallback to localStorage (browser only)
+        try {
+            const token = localStorage.getItem('hassTokens');
+            if (token) {
+                const tokens = JSON.parse(token);
+                if (tokens.access_token) {
+                    return tokens.access_token;
+                }
+            }
+        } catch (e) {
+            console.warn('Could not get token from localStorage:', e);
+        }
+        
+        throw new Error('No authentication token found. Please ensure the panel is loaded within Home Assistant.');
+    }
+    
+    send(message) {
+        if (this.connection && this.connection.readyState === WebSocket.OPEN) {
+            this.connection.send(JSON.stringify(message));
+        } else {
+            throw new Error('WebSocket not connected');
+        }
+    }
+    
+    async sendRequest(message) {
+        // If using hass object (custom panel mode), use hass.callWS
+        if (this.hass && this.usingHassObject) {
+            try {
+                return await this.hass.callWS(message);
+            } catch (error) {
+                console.error('Error calling hass.callWS:', error);
+                throw error;
+            }
+        }
+        
+        // Fallback to WebSocket mode
+        const id = this.messageId++;
+        const request = { id, ...message };
+        
+        return new Promise((resolve, reject) => {
+            this.pendingRequests.set(id, { resolve, reject });
+            this.send(request);
+            
+            // Timeout after 30 seconds
+            setTimeout(() => {
+                if (this.pendingRequests.has(id)) {
+                    this.pendingRequests.delete(id);
+                    reject(new Error('Request timeout'));
+                }
+            }, 30000);
+        });
+    }
+    
+    async getStates() {
+        // Custom panel mode
+        if (this.hass && this.usingHassObject) {
+            return Object.values(this.hass.states);
+        }
+        // WebSocket mode
+        return await this.sendRequest({ type: 'get_states' });
+    }
+    
+    async getConfig() {
+        // Custom panel mode
+        if (this.hass && this.usingHassObject) {
+            return this.hass.config;
+        }
+        // WebSocket mode
+        return await this.sendRequest({ type: 'get_config' });
+    }
+    
+    async getClimateEntities() {
+        const states = await this.getStates();
+        return states.filter(state => 
+            state.entity_id.startsWith('climate.') && 
+            !state.entity_id.startsWith('climate.climate_scheduler_')
+        );
+    }
+    
+    async callService(domain, service, serviceData, returnResponse = false) {
+        // Custom panel mode
+        if (this.hass && this.usingHassObject) {
+            // Use callWS for return_response to avoid triggering haptic feedback
+            if (returnResponse) {
+                const result = await this.hass.callWS({
+                    type: 'call_service',
+                    domain,
+                    service,
+                    service_data: serviceData,
+                    return_response: true
+                });
+                return result?.response;
+            } else {
+                // Use callService for non-return-response calls
+                return await this.hass.callService(domain, service, serviceData);
+            }
+        }
+        
+        // WebSocket mode
+        const requestData = {
+            type: 'call_service',
+            domain,
+            service,
+            service_data: serviceData
+        };
+        
+        if (returnResponse) {
+            requestData.return_response = true;
+        }
+        
+        return await this.sendRequest(requestData);
+    }
+    
+    async setLogLevel(level = 'debug') {
+        return await this.callService('logger', 'set_level', {
+            'custom_components.climate_scheduler': level
+        });
+    }
+    
+    async getSchedule(entityId, day = null) {
+        try {
+            const serviceData = {
+                schedule_id: entityId
+            };
+            
+            if (day) {
+                serviceData.day = day;
+            }
+            
+            // Call our custom service to get schedule with return_response
+            const result = await this.callService('climate_scheduler', 'get_schedule', 
+                serviceData, true);  // Pass true to enable return_response
+            return result;
+        } catch (error) {
+            console.error('Failed to get schedule:', error);
+            return null;
+        }
+    }
+    
+    async setSchedule(entityId, nodes, day = null, scheduleMode = null) {
+        const serviceData = {
+            schedule_id: entityId,
+            nodes: nodes
+        };
+        
+        if (day) {
+            serviceData.day = day;
+        }
+        if (scheduleMode) {
+            serviceData.schedule_mode = scheduleMode;
+        }
+        
+        return await this.callService('climate_scheduler', 'set_schedule', serviceData);
+    }
+    
+    async enableSchedule(entityId) {
+        return await this.callService('climate_scheduler', 'enable_schedule', {
+            schedule_id: entityId
+        });
+    }
+    
+    async disableSchedule(entityId) {
+        return await this.callService('climate_scheduler', 'disable_schedule', {
+            schedule_id: entityId
+        });
+    }
+    
+    async advanceSchedule(entityId) {
+        return await this.callService('climate_scheduler', 'advance_schedule', {
+            schedule_id: entityId
+        });
+    }
+    
+    async advanceGroup(groupName) {
+        return await this.callService('climate_scheduler', 'advance_group', {
+            schedule_id: groupName
+        });
+    }
+    
+    async cancelAdvance(entityId) {
+        return await this.callService('climate_scheduler', 'cancel_advance', {
+            schedule_id: entityId
+        });
+    }
+    
+    async getAdvanceStatus(entityId) {
+        try {
+            const result = await this.callService('climate_scheduler', 'get_advance_status', {
+                schedule_id: entityId
+            }, true);
+            // Normalize across modes:
+            // - hass.callWS path returns `result.response`
+            // - websocket path may return `{response: ...}`
+            return result?.response ?? result;
+        } catch (error) {
+            console.error('Failed to get advance status:', error);
+            return { is_active: false, history: [] };
+        }
+    }
+    
+    async clearAdvanceHistory(entityId) {
+        return await this.callService('climate_scheduler', 'clear_advance_history', {
+            schedule_id: entityId
+        });
+    }
+    
+    async testFireEvent(groupName, node, day) {
+        return await this.callService('climate_scheduler', 'test_fire_event', {
+            schedule_id: groupName,
+            node: JSON.stringify(node),
+            day: day
+        });
+    }
+
+    
+    async getOverrideStatus(entityId) {
+        try {
+            const result = await this.callService('climate_scheduler', 'get_override_status', {
+                schedule_id: entityId
+            }, true);
+            return result;
+        } catch (error) {
+            console.error('Failed to get override status:', error);
+            return { has_override: false };
+        }
+    }
+    
+    async clearSchedule(entityId) {
+        return await this.callService('climate_scheduler', 'clear_schedule', {
+            schedule_id: entityId
+        });
+    }
+    
+    async setIgnored(entityId, ignored) {
+        return await this.callService('climate_scheduler', 'set_ignored', {
+            schedule_id: entityId,
+            ignored: ignored
+        });
+    }
+    
+    // Group management methods
+    async createGroup(groupName) {
+        return await this.callService('climate_scheduler', 'create_group', {
+            schedule_id: groupName
+        });
+    }
+    
+    async deleteGroup(groupName) {
+        return await this.callService('climate_scheduler', 'delete_group', {
+            schedule_id: groupName
+        });
+    }
+    
+    async renameGroup(oldName, newName) {
+        return await this.callService('climate_scheduler', 'rename_group', {
+            old_name: oldName,
+            new_name: newName
+        });
+    }
+    
+    async addToGroup(groupName, entityId) {
+        return await this.callService('climate_scheduler', 'add_to_group', {
+            schedule_id: groupName,
+            entity_id: entityId
+        });
+    }
+    
+    async removeFromGroup(groupName, entityId) {
+        return await this.callService('climate_scheduler', 'remove_from_group', {
+            schedule_id: groupName,
+            entity_id: entityId
+        });
+    }
+    
+    async getGroups() {
+        try {
+            const result = await this.callService('climate_scheduler', 'get_groups', {}, true);
+            return result;
+        } catch (error) {
+            console.error('Failed to get groups:', error);
+            return { groups: {} };
+        }
+    }
+    
+    async setGroupSchedule(groupName, nodes, day = null, scheduleMode = null, profileName = null) {
+        const callStartTime = performance.now();
+        console.debug('[HA-API] setGroupSchedule called', {
+            timestamp: new Date().toISOString(),
+            groupName,
+            nodeCount: nodes?.length,
+            day,
+            scheduleMode,
+            profileName,
+            usingHassObject: this.usingHassObject
+        });
+        
+        // Guard: ensure a valid groupName is provided before calling HA service.
+        if (!groupName) {
+            const msg = 'setGroupSchedule called without a valid groupName';
+            console.error('[HA-API]', msg, groupName, nodes, day, scheduleMode);
+            // Throw so callers can handle the error rather than sending null to HA
+            throw new Error(msg);
+        }
+
+        const serviceData = {
+            schedule_id: groupName,
+            nodes: nodes
+        };
+        
+        if (day) {
+            serviceData.day = day;
+        }
+        if (scheduleMode) {
+            serviceData.schedule_mode = scheduleMode;
+        }
+        if (profileName) {
+            serviceData.profile_name = profileName;
+        }
+        
+        console.debug('[HA-API] Calling climate_scheduler.set_group_schedule', {
+            serviceData: { ...serviceData, nodes: `[${nodes?.length} nodes]` },
+            connectionMode: this.usingHassObject ? 'hass-object' : 'websocket'
+        });
+        
+        try {
+            const result = await this.callService('climate_scheduler', 'set_group_schedule', serviceData);
+            console.debug('[HA-API] set_group_schedule succeeded', {
+                duration: (performance.now() - callStartTime).toFixed(2) + 'ms',
+                result
+            });
+            return result;
+        } catch (error) {
+            console.error('[HA-API] setGroupSchedule failed:', {
+                error,
+                errorCode: error?.code,
+                errorMessage: error?.message,
+                translationKey: error?.translation_key,
+                translationPlaceholders: error?.translation_placeholders,
+                groupName,
+                duration: (performance.now() - callStartTime).toFixed(2) + 'ms',
+                connectionMode: this.usingHassObject ? 'hass-object' : 'websocket'
+            });
+            throw error;
+        }
+    }
+    
+    async enableGroup(groupName) {
+        return await this.callService('climate_scheduler', 'enable_group', {
+            schedule_id: groupName
+        });
+    }
+    
+    async disableGroup(groupName) {
+        return await this.callService('climate_scheduler', 'disable_group', {
+            schedule_id: groupName
+        });
+    }
+    
+    async getHistory(entityId, startTime, endTime) {
+        try {
+            // Format times as ISO strings
+            const start = startTime.toISOString();
+            const end = endTime ? endTime.toISOString() : new Date().toISOString();
+            
+            // Use recorder history API
+            const result = await this.sendRequest({
+                type: 'history/history_during_period',
+                start_time: start,
+                end_time: end,
+                entity_ids: [entityId],
+                minimal_response: false,
+                no_attributes: false
+            });
+            
+            return result;
+        } catch (error) {
+            console.error('Failed to get history:', error);
+            return null;
+        }
+    }
+    
+    async subscribeToStateChanges() {
+        // Custom panel mode - hass object handles state updates automatically
+        if (this.hass && this.usingHassObject) {
+            // Set up listener for hass state changes
+            // The panel will call updateHassConnection when hass changes
+            console.log('Using hass object state updates');
+            return Promise.resolve();
+        }
+        
+        // WebSocket mode
+        return await this.sendRequest({
+            type: 'subscribe_events',
+            event_type: 'state_changed'
+        });
+    }
+    
+    async getSettings() {
+        try {
+            const result = await this.callService('climate_scheduler', 'get_settings', {}, true);
+
+            // Normalize across execution modes:
+            // - In custom panel mode, callService(..., true) returns the service response directly.
+            // - In raw websocket mode, callService may return { response: <service_response> }.
+            const payload = result?.response ?? result ?? {};
+
+            // Service response includes version metadata, but app.js expects the raw settings dict.
+            // If the response shape is { settings: {...}, version: {...} }, return settings.
+            if (
+                payload &&
+                typeof payload === 'object' &&
+                payload.version &&
+                payload.settings &&
+                typeof payload.settings === 'object'
+            ) {
+                return payload.settings;
+            }
+
+            return payload;
+        } catch (error) {
+            console.error('Failed to get settings:', error);
+            return {};
+        }
+    }
+    
+    async saveSettings(settings) {
+        try {
+            await this.callService('climate_scheduler', 'save_settings', { settings: JSON.stringify(settings) });
+            return true;
+        } catch (error) {
+            console.error('Failed to save settings:', error);
+            throw error;
+        }
+    }
+    
+    async cleanupDerivativeSensors(confirmDeleteAll = false) {
+        try {
+            const result = await this.callService('climate_scheduler', 'cleanup_derivative_sensors', {
+                confirm_delete_all: confirmDeleteAll
+            }, true);
+            return result?.response || result || {};
+        } catch (error) {
+            console.error('Failed to cleanup derivative sensors:', error);
+            throw error;
+        }
+    }
+    
+    async cleanupOrphanedClimateEntities(deleteEntities = false) {
+        try {
+            const result = await this.callService('climate_scheduler', 'cleanup_orphaned_climate_entities', {
+                delete: deleteEntities
+            }, true);
+            return result?.response || result || {};
+        } catch (error) {
+            console.error('Failed to cleanup orphaned climate entities:', error);
+            throw error;
+        }
+    }
+
+    async cleanupUnmonitoredStorage(deleteEntries = false) {
+        try {
+            const result = await this.callService('climate_scheduler', 'cleanup_unmonitored_storage', {
+                delete: deleteEntries
+            }, true);
+            return result?.response || result || {};
+        } catch (error) {
+            console.error('Failed to cleanup unmonitored storage:', error);
+            throw error;
+        }
+    }
+    
+    // Profile management methods
+    async createProfile(scheduleId, profileName) {
+        return await this.callService('climate_scheduler', 'create_profile', {
+            schedule_id: scheduleId,
+            profile_name: profileName
+        });
+    }
+    
+    async deleteProfile(scheduleId, profileName) {
+        return await this.callService('climate_scheduler', 'delete_profile', {
+            schedule_id: scheduleId,
+            profile_name: profileName
+        });
+    }
+    
+    async renameProfile(scheduleId, oldName, newName) {
+        return await this.callService('climate_scheduler', 'rename_profile', {
+            schedule_id: scheduleId,
+            old_name: oldName,
+            new_name: newName
+        });
+    }
+    
+    async setActiveProfile(scheduleId, profileName) {
+        return await this.callService('climate_scheduler', 'set_active_profile', {
+            schedule_id: scheduleId,
+            profile_name: profileName
+        });
+    }
+    
+    async getProfiles(scheduleId) {
+        try {
+            const result = await this.callService('climate_scheduler', 'get_profiles', {
+                schedule_id: scheduleId
+            }, true);
+            return result;
+        } catch (error) {
+            console.error('Failed to get profiles:', error);
+            return { profiles: {}, active_profile: null };
+        }
+    }
+    
+    async runDiagnostics() {
+        try {
+            const result = await this.callService('climate_scheduler', 'diagnostics', {}, true);
+            return result;
+        } catch (error) {
+            console.error('Failed to run diagnostics:', error);
+            throw error;
+        }
+    }
+    
+    onStateUpdate(callback) {
+        this.stateUpdateCallbacks.push(callback);
+    }
+    
+    notifyStateUpdate(data) {
+        this.stateUpdateCallbacks.forEach(callback => {
+            try {
+                callback(data);
+            } catch (error) {
+                console.error('Error in state update callback:', error);
+            }
+        });
+    }
+    
+    async subscribeToEvents(eventType, callback) {
+        if (this.usingHassObject && this.hass) {
+            // Use hass connection for event subscription
+            const conn = this.hass.connection;
+            if (conn && conn.subscribeEvents) {
+                return await conn.subscribeEvents(callback, eventType);
+            }
+        }
+        console.warn('Event subscription not available');
+        return null;
+    }}

custom_components/climate_scheduler/frontend/panel.js

@@ -0,0 +1,598 @@
+/**
+ * Climate Scheduler Custom Panel
+ * Modern Home Assistant custom panel implementation (replaces legacy iframe approach)
+ */
+// Version checking - detect if browser cache is stale
+(async function () {
+    try {
+        const scriptUrl = document.currentScript?.src || new URL(import.meta.url).href;
+        const loadedVersion = new URL(scriptUrl).searchParams.get('v');
+        // Fetch the current server version
+        const response = await fetch('/climate_scheduler/static/.version');
+        if (response.ok) {
+            const serverVersion = (await response.text()).trim().split(',')[0];
+            // Compare versions - check the aren't None and if they don't match, user has stale cache
+            if ((loadedVersion && serverVersion) && loadedVersion !== serverVersion) {
+                console.warn('[Climate Scheduler] Version mismatch detected. Loaded:', loadedVersion, 'Server:', serverVersion);
+                // Store in sessionStorage to avoid showing repeatedly
+                const notificationKey = 'climate_scheduler_refresh_shown';
+                const shownVersion = sessionStorage.getItem(notificationKey);
+                if (shownVersion !== serverVersion) {
+                    // Show persistent notification
+                    const event = new CustomEvent('hass-notification', {
+                        bubbles: true,
+                        cancelable: false,
+                        composed: true,
+                        detail: {
+                            message: 'Climate Scheduler has been updated. Please refresh your browser (Ctrl+F5 or Cmd+Shift+R) to load the new version.',
+                            duration: 0 // Persistent notification
+                        }
+                    });
+                    document.body.dispatchEvent(event);
+                    // Mark as shown for this session
+                    sessionStorage.setItem(notificationKey, serverVersion);
+                    console.info('[Climate Scheduler] Refresh notification displayed');
+                }
+            }
+        }
+    }
+    catch (e) {
+        console.warn('[Climate Scheduler] Version check failed:', e);
+    }
+})();
+// Load other JavaScript files
+const loadScript = (src) => {
+    return new Promise((resolve, reject) => {
+        const script = document.createElement('script');
+        script.src = src;
+        script.onload = () => resolve();
+        script.onerror = reject;
+        document.head.appendChild(script);
+    });
+};
+// Track if scripts are loaded
+let scriptsLoaded = false;
+const getVersion = () => {
+    const scriptUrl = import.meta.url;
+    const version = new URL(scriptUrl).searchParams.get('v');
+    if (!version)
+        return null;
+    // If version has comma (dev: "tag,timestamp"), use timestamp for cache busting
+    if (version.includes(',')) {
+        const parts = version.split(',');
+        return parts[1]; // timestamp
+    }
+    // Otherwise use version as-is (HACS tag or production tag)
+    return version;
+};
+// Load dependencies in order
+const loadScripts = () => {
+    if (scriptsLoaded)
+        return Promise.resolve();
+    // Determine base path from where panel.js was loaded
+    const scriptUrl = import.meta.url;
+    const url = new URL(scriptUrl);
+    // Remove panel.js and query params to get base path
+    const basePath = url.origin + url.pathname.substring(0, url.pathname.lastIndexOf('/'));
+    const version = getVersion();
+    return Promise.all([
+        loadScript(`${basePath}/utils.js?v=${version}`),
+        loadScript(`${basePath}/ha-api.js?v=${version}`)
+    ]).then(() => {
+        return loadScript(`${basePath}/app.js?v=${version}`);
+    }).then(() => {
+        scriptsLoaded = true;
+    }).catch(error => {
+        console.error('Failed to load Climate Scheduler scripts:', error);
+        throw error;
+    });
+};
+class ClimateSchedulerPanel extends HTMLElement {
+    constructor() {
+        super();
+        this._hass = null;
+        this.narrow = false;
+        this.panel = null;
+    }
+    // Declare properties that Home Assistant looks for
+    static get properties() {
+        return {
+            hass: { type: Object },
+            narrow: { type: Boolean },
+            route: { type: Object },
+            panel: { type: Object }
+        };
+    }
+    async connectedCallback() {
+        this.render();
+        // Store reference to this panel element globally so app.js can query within it
+        window.climateSchedulerPanelRoot = this;
+        // Wait for scripts to load before initializing
+        try {
+            await loadScripts();
+            // Small delay to ensure DOM is fully rendered
+            await new Promise(resolve => setTimeout(resolve, 100));
+            // Update version info in footer
+            const versionElement = this.querySelector('#version-info');
+            if (versionElement) {
+                try {
+                    const scriptUrl = import.meta.url;
+                    const versionParam = new URL(scriptUrl).searchParams.get('v');
+                    let version = '';
+                    if (versionParam) {
+                        if (versionParam.includes(',')) {
+                            // Has timestamp - dev deployment: "tag,timestamp"
+                            const parts = versionParam.split(',');
+                            const tag = (parts[0] || 'unknown').replace(/^v/, '');
+                            version = `v${tag} (dev)`;
+                        }
+                        else {
+                            // No timestamp - production: just tag
+                            const tag = versionParam.replace(/^v/, '');
+                            version = `v${tag}`;
+                        }
+                    }
+                    else {
+                        version = '(manual)';
+                    }
+                    versionElement.textContent = `Climate Scheduler ${version}`;
+                }
+                catch (e) {
+                    console.warn('Failed to determine version:', e);
+                    versionElement.textContent = 'Climate Scheduler';
+                }
+            }
+            // Initialize the app when panel is loaded and scripts are ready
+            if (window.initClimateSchedulerApp) {
+                window.initClimateSchedulerApp(this.hass);
+            }
+        }
+        catch (error) {
+            console.error('Failed to initialize Climate Scheduler:', error);
+        }
+    }
+    set hass(value) {
+        this._hass = value;
+        // Apply theme based on Home Assistant theme mode
+        if (value && value.themes) {
+            const isDark = value.themes.darkMode;
+            if (isDark) {
+                // Dark mode is default, remove attribute
+                document.documentElement.removeAttribute('data-theme');
+                this.removeAttribute('data-theme');
+            }
+            else {
+                // Light mode needs explicit attribute
+                document.documentElement.setAttribute('data-theme', 'light');
+                this.setAttribute('data-theme', 'light');
+            }
+        }
+        // Pass hass object to app if it's already initialized
+        if (window.updateHassConnection && value) {
+            window.updateHassConnection(value);
+        }
+    }
+    get hass() {
+        return this._hass;
+    }
+    render() {
+        if (!this.querySelector('.container')) {
+            // Load CSS using same base path detection as scripts
+            const scriptUrl = import.meta.url;
+            const url = new URL(scriptUrl);
+            const basePath = url.origin + url.pathname.substring(0, url.pathname.lastIndexOf('/'));
+            const version = getVersion();
+            const styleLink = document.createElement('link');
+            styleLink.rel = 'stylesheet';
+            styleLink.href = `${basePath}/styles.css?v=${version}`;
+            this.appendChild(styleLink);
+            // Create container div for content
+            const container = document.createElement('div');
+            container.innerHTML = `
+                <div class="container">
+                    <section class="entity-selector">
+                        <div class="groups-section">
+                            <h3 class="section-title">Monitored (<span id="groups-count">0</span>)</h3>
+                            <div id="groups-list" class="groups-list">
+                                <!-- Dynamically populated with groups -->
+                            </div>
+                        </div>
+
+                        <div class="profiles-section">
+                            <div class="group-container collapsed" id="global-profile-container">
+                                <div class="group-header" id="toggle-global-profiles">
+                                    <div style="display: flex; align-items: center; gap: 8px;">
+                                        <span class="group-toggle-icon" style="transform: rotate(-90deg);">▼</span>
+                                        <span class="group-title">Profiles</span>
+                                    </div>
+                                </div>
+                                <div id="global-profile-list" style="display: none; padding: 12px 16px;">
+                                    <div class="profile-controls">
+                                        <select id="profile-dropdown" class="profile-dropdown">
+                                            <option value="" disabled selected>Select a profile to edit...</option>
+                                        </select>
+                                        <button id="new-profile-btn" class="btn-profile" title="Create new profile">＋</button>
+                                        <button id="rename-profile-btn" class="btn-profile" title="Rename profile">✎</button>
+                                        <button id="delete-profile-btn" class="btn-profile" title="Delete profile">🗑</button>
+                                    </div>
+                                </div>
+                            </div>
+                        </div>
+                        
+                        <div class="ignored-section">
+                            <div class="group-container collapsed" id="ignored-container">
+                                <div class="group-header" id="toggle-ignored">
+                                    <div style="display: flex; align-items: center; gap: 8px;">
+                                        <span class="group-toggle-icon" style="transform: rotate(-90deg);">▼</span>
+                                        <span class="group-title">Unmonitored</span>
+                                    </div>
+                                </div>
+                                <div id="ignored-entity-list" class="entity-list ignored-list" style="display: none;">
+                                    <div class="filter-box">
+                                        <input type="text" id="ignored-filter" placeholder="Filter by name..." />
+                                    </div>
+                                    <div id="ignored-entities-container">
+                                        <span id="ignored-count" style="display: none;">0</span>
+                                        <!-- Dynamically populated -->
+                                    </div>
+                                </div>
+                            </div>
+                        </div>
+                    </section>
+
+                    <!-- Modals -->
+                    <div id="confirm-modal" class="modal" style="display: none;">
+                        <div class="modal-content">
+                            <div class="modal-header">
+                                <h3>Clear Schedule?</h3>
+                            </div>
+                            <div class="modal-body">
+                                <p>Are you sure you want to clear the entire schedule for <strong id="confirm-entity-name"></strong>?</p>
+                                <p>This action cannot be undone.</p>
+                            </div>
+                            <div class="modal-actions">
+                                <button id="confirm-cancel" class="btn-secondary">Cancel</button>
+                                <button id="confirm-clear" class="btn-danger">Clear Schedule</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <div id="create-group-modal" class="modal" style="display: none;">
+                        <div class="modal-content">
+                            <div class="modal-header">
+                                <h3>Create New Group</h3>
+                            </div>
+                            <div class="modal-body">
+                                <label for="new-group-name">Group Name:</label>
+                                <input type="text" id="new-group-name" placeholder="e.g., Bedrooms" style="width: 100%; padding: 8px; margin-top: 8px;" />
+                            </div>
+                            <div class="modal-actions">
+                                <button id="create-group-cancel" class="btn-secondary">Cancel</button>
+                                <button id="create-group-confirm" class="btn-primary">Create Group</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <div id="add-to-group-modal" class="modal" style="display: none;">
+                        <div class="modal-content">
+                            <div class="modal-header">
+                                <h3>Add to Group</h3>
+                            </div>
+                            <div class="modal-body">
+                                <p>Add <strong id="add-entity-name"></strong> to group:</p>
+                                <select id="add-to-group-select" style="width: 100%; padding: 8px; margin-top: 8px; margin-bottom: 8px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius: 6px;">
+                                    <!-- Populated dynamically -->
+                                </select>
+                                <p style="text-align: center; color: var(--text-secondary); margin: 8px 0;">or</p>
+                                <input type="text" id="new-group-name-inline" placeholder="Create new group..." style="width: 100%; padding: 8px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius: 6px;" />
+                            </div>
+                            <div class="modal-actions">
+                                <button id="add-to-group-cancel" class="btn-secondary">Cancel</button>
+                                <button id="add-to-group-confirm" class="btn-primary">Add to Group</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <div id="convert-temperature-modal" class="modal" style="display: none;">
+                        <div class="modal-content">
+                            <div class="modal-header">
+                                <h3>Convert All Schedules</h3>
+                            </div>
+                            <div class="modal-body">
+                                <p style="margin-bottom: 16px;">This will convert all saved schedules (entities and groups) as well as the default schedule and min/max settings.</p>
+                                
+                                <div style="margin-bottom: 16px;">
+                                    <label style="display: block; margin-bottom: 8px; font-weight: 600;">Current unit (convert FROM):</label>
+                                    <div style="display: flex; gap: 16px;">
+                                        <label style="display: flex; align-items: center; gap: 8px; cursor: pointer;">
+                                            <input type="radio" name="convert-from-unit" value="°C" id="convert-from-celsius" style="cursor: pointer;">
+                                            <span>Celsius (°C)</span>
+                                        </label>
+                                        <label style="display: flex; align-items: center; gap: 8px; cursor: pointer;">
+                                            <input type="radio" name="convert-from-unit" value="°F" id="convert-from-fahrenheit" style="cursor: pointer;">
+                                            <span>Fahrenheit (°F)</span>
+                                        </label>
+                                    </div>
+                                </div>
+                                
+                                <div style="margin-bottom: 16px;">
+                                    <label style="display: block; margin-bottom: 8px; font-weight: 600;">Target unit (convert TO):</label>
+                                    <div style="display: flex; gap: 16px;">
+                                        <label style="display: flex; align-items: center; gap: 8px; cursor: pointer;">
+                                            <input type="radio" name="convert-to-unit" value="°C" id="convert-to-celsius" style="cursor: pointer;">
+                                            <span>Celsius (°C)</span>
+                                        </label>
+                                        <label style="display: flex; align-items: center; gap: 8px; cursor: pointer;">
+                                            <input type="radio" name="convert-to-unit" value="°F" id="convert-to-fahrenheit" style="cursor: pointer;">
+                                            <span>Fahrenheit (°F)</span>
+                                        </label>
+                                    </div>
+                                </div>
+                                
+                                <p style="color: var(--warning, #ff9800); font-size: 0.9rem;"><strong>Warning:</strong> This action cannot be undone. Make sure you select the correct source and target units.</p>
+                            </div>
+                            <div class="modal-actions">
+                                <button id="convert-temperature-cancel" class="btn-secondary">Cancel</button>
+                                <button id="convert-temperature-confirm" class="btn-primary">Convert Schedules</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <div id="edit-group-modal" class="modal" style="display: none;">
+                        <div class="modal-content">
+                            <div class="modal-header">
+                                <h3>Edit Group</h3>
+                            </div>
+                            <div class="modal-body">
+                                <label for="edit-group-name">Group Name:</label>
+                                <input type="text" id="edit-group-name" placeholder="Group name" style="width: 100%; padding: 8px; margin-top: 8px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius: 6px;" />
+                            </div>
+                            <div class="modal-actions">
+                                <button id="edit-group-delete" class="btn-danger">Delete Group</button>
+                                <div style="flex: 1;"></div>
+                                <button id="edit-group-cancel" class="btn-secondary">Cancel</button>
+                                <button id="edit-group-save" class="btn-primary">Save</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <!-- Instructions Section (Collapsible) -->
+                    <div class="instructions-container">
+                        <div id="global-instructions-toggle" class="instructions-toggle">
+                            <span class="toggle-icon">▶</span>
+                            <span class="toggle-text">Instructions</span>
+                        </div>
+                        <div id="global-graph-instructions" class="graph-instructions collapsed" style="display: none;">
+                            <p>📍 <strong>Double-click or double-tap</strong> the line to add a new node</p>
+                            <p>👆 <strong>Drag nodes</strong> vertically to change temperature or horizontally to move their time</p>
+                            <p>⬌ <strong>Drag the horizontal segment</strong> between two nodes to shift that period while preserving its duration</p>
+                            <p>📋 <strong>Copy / Paste</strong> buttons duplicate a schedule across days or entities</p>
+                            <p>⚙️ <strong>Tap a node</strong> to open its settings panel for HVAC/fan/swing/preset values</p>
+                        </div>
+                    </div>
+
+                    <!-- Settings Panel -->
+                    <div id="settings-panel" class="settings-panel collapsed">
+                        <div class="settings-header" id="settings-toggle">
+                            <div style="display: flex; align-items: center; gap: 8px;">
+                                <span class="collapse-indicator" style="transform: rotate(-90deg);">▼</span>
+                                <h3>Settings</h3>
+                            </div>
+                        </div>
+                        <div class="settings-content">
+                            <div class="settings-flex" style="display: flex; gap: 24px; align-items: flex-start;">
+                                <div class="settings-main" style="flex: 1; min-width: 0;">
+                                    <div class="settings-section">
+                                        <h4>Group Management</h4>
+                                        <button id="create-group-btn" class="btn-secondary" style="width: 100%;">
+                                            + Create New Group
+                                        </button>
+                                    </div>
+                                    
+                                    <div class="settings-section">
+                                        <h4>Default Schedule</h4>
+                                        <p class="settings-description">Set the default temperature schedule used when clearing or creating new schedules</p>
+                                        
+                                        <div class="graph-container">
+                                            <keyframe-timeline id="default-schedule-graph" class="temperature-graph" showHeader="false"></keyframe-timeline>
+                                        </div>
+                                        
+                                        <div style="margin-top: 8px;">
+                                            <button id="clear-default-schedule-btn" class="btn-danger-outline">Clear Schedule</button>
+                                        </div>
+                                        
+                                        <div id="default-node-settings-panel" class="node-settings-panel" style="display: none;">
+                                            <div style="display: flex; justify-content: space-between; align-items: center;">
+                                                <h4>Node Settings</h4>
+                                                <button id="default-delete-node-btn" class="btn-danger-outline" style="padding: 4px 12px; font-size: 0.9rem;">Delete Node</button>
+                                            </div>
+                                            <div class="node-info">
+                                                <span>Time: <strong id="default-node-time">--:--</strong></span>
+                                                <span>Temperature: <strong id="default-node-temp">--°C</strong></span>
+                                            </div>
+                                            
+                                            <div class="setting-item" id="default-hvac-mode-item">
+                                                <label for="default-node-hvac-mode">HVAC Mode:</label>
+                                                <select id="default-node-hvac-mode"><option value="">-- No Change --</option></select>
+                                            </div>
+                                            
+                                            <div class="setting-item" id="default-fan-mode-item">
+                                                <label for="default-node-fan-mode">Fan Mode:</label>
+                                                <select id="default-node-fan-mode"><option value="">-- No Change --</option></select>
+                                            </div>
+                                            
+                                            <div class="setting-item" id="default-swing-mode-item">
+                                                <label for="default-node-swing-mode">Swing Mode:</label>
+                                                <select id="default-node-swing-mode"><option value="">-- No Change --</option></select>
+                                            </div>
+                                            
+                                            <div class="setting-item" id="default-preset-mode-item">
+                                                <label for="default-node-preset-mode">Preset Mode:</label>
+                                                <select id="default-node-preset-mode"><option value="">-- No Change --</option></select>
+                                            </div>
+                                        </div>
+                                    </div>
+                                    
+                                    <div class="settings-section">
+                                        <h4>Graph Options</h4>
+                                        <div class="setting-row" style="display:flex; gap:18px; align-items:flex-start; flex-wrap: wrap;">
+                                            <div class="setting-item" style="flex:1; min-width:280px;">
+                                                <label for="tooltip-mode">Tooltip Display:</label>
+                                                <select id="tooltip-mode">
+                                                    <option value="history">Show Historical Temperature</option>
+                                                    <option value="cursor">Show Cursor Position</option>
+                                                </select>
+                                                <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;">Choose what information to display when hovering over the graph</p>
+                                            </div>
+                                            <div style="display:flex; gap:12px; align-items:center;">
+                                                <div style="display:flex; flex-direction:column; gap:6px;">
+                                                    <label for="min-temp" style="font-weight:600;">Min Temp (<span id="min-unit">°C</span>)</label>
+                                                    <input id="min-temp" type="number" step="0.1" placeholder="e.g. 5.0" style="width:120px; padding:6px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius:6px;" />
+                                                </div>
+                                                <div style="display:flex; flex-direction:column; gap:6px;">
+                                                    <label for="max-temp" style="font-weight:600;">Max Temp (<span id="max-unit">°C</span>)</label>
+                                                    <input id="max-temp" type="number" step="0.1" placeholder="e.g. 30.0" style="width:120px; padding:6px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius:6px;" />
+                                                </div>
+                                            </div>
+                                        </div>
+                                        <div class="setting-item" style="margin-top: 12px;">
+                                            <label>
+                                                <input type="checkbox" id="debug-panel-toggle" style="margin-right: 8px;"> Show Debug Panel
+                                            </label>
+                                        </div>
+                                    </div>
+                                    
+                                    <div class="settings-section">
+                                        <h4>Temperature Precision</h4>
+                                        <div class="setting-row" style="display:flex; gap:18px; align-items:flex-start; flex-wrap: wrap;">
+                                            <div class="setting-item" style="flex:1; min-width:280px;">
+                                                <label for="graph-snap-step">Graph Snap Step:</label>
+                                                <select id="graph-snap-step" style="padding:6px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius:6px;">
+                                                    <option value="0.1">0.1°</option>
+                                                    <option value="0.5">0.5°</option>
+                                                    <option value="1">1.0°</option>
+                                                </select>
+                                                <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;">Temperature rounding when dragging nodes on the graph</p>
+                                            </div>
+                                            <div class="setting-item" style="flex:1; min-width:280px;">
+                                                <label for="input-temp-step">Input Field Step:</label>
+                                                <select id="input-temp-step" style="padding:6px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius:6px;">
+                                                    <option value="0.1">0.1°</option>
+                                                    <option value="0.5">0.5°</option>
+                                                    <option value="1">1.0°</option>
+                                                </select>
+                                                <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;">Step size for temperature input fields and up/down buttons</p>
+                                            </div>
+                                            <div class="setting-item" style="flex:1; min-width:280px;">
+                                                <label for="humidity-step">Humidity Slider Step:</label>
+                                                <select id="humidity-step" style="padding:6px; background: var(--surface-light); color: var(--text-primary); border: 1px solid var(--border); border-radius:6px;">
+                                                    <option value="1">1%</option>
+                                                    <option value="2">2%</option>
+                                                    <option value="5">5%</option>
+                                                </select>
+                                                <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;">Step size for humidity slider in node settings dialog</p>
+                                            </div>
+                                        </div>
+                                    </div>
+                                    
+                                    <div class="settings-section">
+                                        <h4>Derivative Sensors</h4>
+                                        <p class="settings-description">Automatically create sensors to track heating/cooling rates for performance analysis</p>
+                                        <div class="setting-item" style="max-width: 100%;">
+                                            <label>
+                                                <input type="checkbox" id="create-derivative-sensors" style="margin-right: 8px;"> Auto-create derivative sensors
+                                            </label>
+                                            <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;">When enabled, creates sensor.climate_scheduler_[name]_rate for each thermostat to track temperature change rate (°C/h)</p>
+                                        </div>
+                                    </div>
+                                    
+                                    <div class="settings-section">
+                                        <h4>Workday Integration</h4>
+                                        <p class="settings-description">Configure which days are workdays for 5/2 mode scheduling</p>
+                                        <div class="setting-item" style="max-width: 100%;">
+                                            <label id="use-workday-label" style="display: flex; align-items: center; gap: 8px; cursor: pointer;">
+                                                <input type="checkbox" id="use-workday-integration" style="margin-right: 8px;" disabled> 
+                                                <span>Use Workday integration for 5/2 scheduling</span>
+                                            </label>
+                                            <p class="settings-description" style="margin-top: 5px; font-size: 0.85rem;" id="workday-help-text">Checking if Workday integration is installed...</p>
+                                        </div>
+                                        
+                                        <div id="workday-selector" style="margin-top: 16px; display: none;">
+                                            <label style="display: block; margin-bottom: 8px; font-weight: 600;">Select Workdays:</label>
+                                            <p class="settings-description" style="margin-bottom: 8px; font-size: 0.85rem;">Choose which days are considered workdays when Workday integration is disabled</p>
+                                            <div style="display: flex; gap: 8px; flex-wrap: wrap;">
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="mon" style="cursor: pointer;">
+                                                    <span>Monday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="tue" style="cursor: pointer;">
+                                                    <span>Tuesday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="wed" style="cursor: pointer;">
+                                                    <span>Wednesday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="thu" style="cursor: pointer;">
+                                                    <span>Thursday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="fri" style="cursor: pointer;">
+                                                    <span>Friday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="sat" style="cursor: pointer;">
+                                                    <span>Saturday</span>
+                                                </label>
+                                                <label style="display: flex; align-items: center; gap: 4px; padding: 6px 12px; background: var(--surface-light); border: 1px solid var(--border); border-radius: 6px; cursor: pointer;">
+                                                    <input type="checkbox" class="workday-checkbox" value="sun" style="cursor: pointer;">
+                                                    <span>Sunday</span>
+                                                </label>
+                                            </div>
+                                        </div>
+                                    </div>
+                                </div>
+
+                                <!-- right column removed: min/max now inline in Graph Options -->
+                            </div>
+
+                            <div class="settings-actions" style="margin-top: 12px; display: flex; gap: 12px; flex-wrap: wrap;">
+                                <button id="refresh-entities-menu" class="btn-secondary">Refresh Entities</button>
+                                <button id="sync-all-menu" class="btn-secondary">Sync All Thermostats</button>
+                                <button id="reload-integration-menu" class="btn-secondary">Reload Integration</button>
+                                <button id="convert-temperature-btn" class="btn-secondary">Convert All Schedules...</button>
+                                <button id="run-diagnostics-btn" class="btn-secondary">Run Diagnostics</button>
+                                <button id="cleanup-derivative-sensors-btn" class="btn-secondary">Cleanup Derivative Sensors</button>
+                                <button id="cleanup-orphaned-climate-btn" class="btn-secondary">Cleanup Orphaned Entities</button>
+                                <button id="cleanup-storage-btn" class="btn-secondary">Cleanup Unmonitored Storage</button>
+                                <button id="reset-defaults" class="btn-secondary">Reset to Defaults</button>
+                            </div>
+                        </div>
+                    </div>
+
+                    <!-- Debug Panel -->
+                    <div id="debug-panel" class="debug-panel" style="display: none;">
+                        <div class="debug-header">
+                            <h3>Debug Console</h3>
+                            <button id="clear-debug" class="btn-secondary" style="padding: 4px 8px; font-size: 0.85rem;">Clear</button>
+                        </div>
+                        <div id="debug-content" class="debug-content">
+                            <!-- Debug messages will appear here -->
+                        </div>
+                    </div>
+
+                    <footer>
+                        <img alt="Integration Usage" src="https://img.shields.io/badge/dynamic/json?color=41BDF5&logo=home-assistant&label=integration%20usage&suffix=%20installs&cacheSeconds=15600&url=https://analytics.home-assistant.io/custom_integrations.json&query=$.climate_scheduler.total" />
+                            <p><span id="version-info">Climate Scheduler</span>, created by <a href="https://neave.engineering" target="_blank" rel="noopener noreferrer" style="color: var(--primary)">Keegan Neave</a></p>
+                            <p><a href="https://www.buymeacoffee.com/kneave" target="_blank" rel="noopener noreferrer" style="color: var(--primary);">☕ Buy me a coffee</a></p>
+                        </div>
+                    </footer>
+                </div>
+            `;
+            this.appendChild(container);
+        }
+    }
+}
+customElements.define('climate-scheduler-panel', ClimateSchedulerPanel);
+//# sourceMappingURL=panel.js.map

custom_components/climate_scheduler/frontend/utils.js

@@ -0,0 +1,185 @@
+/**
+ * Shared Utility Functions
+ * Common utilities used across the Climate Scheduler frontend
+ */
+
+// ============================================================================
+// TIMEZONE UTILITIES
+// ============================================================================
+
+/**
+ * Get a Date-like object in the server's timezone
+ * @param {Date} date - The UTC date to convert
+ * @param {string} serverTimeZone - The server's timezone (e.g., 'America/New_York')
+ * @returns {Object} Date-like object with methods that return values in server timezone
+ */
+function getServerDate(date, serverTimeZone) {
+    if (!serverTimeZone) return date; // Fallback to local time if no timezone set
+    
+    // Use Intl.DateTimeFormat to get date components in server timezone
+    const formatter = new Intl.DateTimeFormat('en-US', {
+        timeZone: serverTimeZone,
+        year: 'numeric',
+        month: '2-digit',
+        day: '2-digit',
+        hour: '2-digit',
+        minute: '2-digit',
+        second: '2-digit',
+        hour12: false
+    });
+    
+    const parts = formatter.formatToParts(date);
+    const partsObj = {};
+    parts.forEach(part => {
+        partsObj[part.type] = part.value;
+    });
+    
+    return {
+        getFullYear: () => parseInt(partsObj.year),
+        getMonth: () => parseInt(partsObj.month) - 1, // JS months are 0-indexed
+        getDate: () => parseInt(partsObj.day),
+        getHours: () => parseInt(partsObj.hour),
+        getMinutes: () => parseInt(partsObj.minute),
+        getSeconds: () => parseInt(partsObj.second),
+        getTime: () => date.getTime(),
+        _originalDate: date
+    };
+}
+
+/**
+ * Get current server time as Date-like object
+ * @param {string} serverTimeZone - The server's timezone
+ * @returns {Object} Date-like object with current time in server timezone
+ */
+function getServerNow(serverTimeZone) {
+    return getServerDate(new Date(), serverTimeZone);
+}
+
+/**
+ * Convert UTC timestamp to server timezone Date-like object
+ * @param {Date} utcDate - The UTC date to convert
+ * @param {string} serverTimeZone - The server's timezone
+ * @returns {Object} Date-like object in server timezone
+ */
+function utcToServerDate(utcDate, serverTimeZone) {
+    return getServerDate(utcDate, serverTimeZone);
+}
+
+// ============================================================================
+// TEMPERATURE CONVERSION UTILITIES
+// ============================================================================
+
+/**
+ * Convert Celsius to Fahrenheit
+ * @param {number} celsius - Temperature in Celsius
+ * @returns {number} Temperature in Fahrenheit
+ */
+function celsiusToFahrenheit(celsius) {
+    return (celsius * 9/5) + 32;
+}
+
+/**
+ * Convert Fahrenheit to Celsius
+ * @param {number} fahrenheit - Temperature in Fahrenheit
+ * @returns {number} Temperature in Celsius
+ */
+function fahrenheitToCelsius(fahrenheit) {
+    return (fahrenheit - 32) * 5/9;
+}
+
+/**
+ * Convert temperature between units
+ * @param {number} temp - Temperature value
+ * @param {string} fromUnit - Source unit ('°C' or '°F')
+ * @param {string} toUnit - Target unit ('°C' or '°F')
+ * @returns {number} Converted temperature
+ */
+function convertTemperature(temp, fromUnit, toUnit) {
+    if (fromUnit === toUnit) return temp;
+    if (fromUnit === '°C' && toUnit === '°F') return celsiusToFahrenheit(temp);
+    if (fromUnit === '°F' && toUnit === '°C') return fahrenheitToCelsius(temp);
+    return temp;
+}
+
+// ============================================================================
+// TIME UTILITIES
+// ============================================================================
+
+/**
+ * Convert time string to minutes since midnight
+ * @param {string} timeStr - Time in 'HH:MM' format
+ * @returns {number} Minutes since midnight
+ */
+function timeToMinutes(timeStr) {
+    const [hours, minutes] = timeStr.split(':').map(Number);
+    return hours * 60 + minutes;
+}
+
+/**
+ * Convert minutes since midnight to time string
+ * @param {number} minutes - Minutes since midnight
+ * @returns {string} Time in 'HH:MM' format
+ */
+function minutesToTime(minutes) {
+    const hours = Math.floor(minutes / 60);
+    const mins = Math.floor(minutes % 60);
+    return `${hours.toString().padStart(2, '0')}:${mins.toString().padStart(2, '0')}`;
+}
+
+/**
+ * Format hours and minutes as 'HH:MM' time string
+ * @param {number} hours - Hours (0-23)
+ * @param {number} minutes - Minutes (0-59)
+ * @returns {string} Time in 'HH:MM' format
+ */
+function formatTimeString(hours, minutes) {
+    return `${hours.toString().padStart(2, '0')}:${minutes.toString().padStart(2, '0')}`;
+}
+
+/**
+ * Adjust time by adding/subtracting minutes with 24-hour wraparound
+ * @param {string} timeStr - Time in 'HH:MM' format
+ * @param {number} minutesToAdd - Minutes to add (negative to subtract)
+ * @returns {string} New time in 'HH:MM' format
+ */
+function adjustTime(timeStr, minutesToAdd) {
+    let totalMinutes = timeToMinutes(timeStr) + minutesToAdd;
+    
+    // Handle wraparound
+    while (totalMinutes < 0) totalMinutes += 1440;
+    while (totalMinutes >= 1440) totalMinutes -= 1440;
+    
+    return minutesToTime(totalMinutes);
+}
+
+/**
+ * Interpolate temperature at a given time (step function - hold until next node)
+ * @param {Array} nodes - Array of schedule nodes with {time, temp} properties
+ * @param {string} timeStr - Time in 'HH:MM' format
+ * @returns {number} Interpolated temperature
+ */
+function interpolateTemperature(nodes, timeStr) {
+    if (nodes.length === 0) return 18;
+    
+    const sorted = [...nodes].sort((a, b) => timeToMinutes(a.time) - timeToMinutes(b.time));
+    const currentMinutes = timeToMinutes(timeStr);
+    
+    // Find the most recent node before or at current time
+    let activeNode = null;
+    
+    for (let i = 0; i < sorted.length; i++) {
+        const nodeMinutes = timeToMinutes(sorted[i].time);
+        if (nodeMinutes <= currentMinutes) {
+            activeNode = sorted[i];
+        } else {
+            break;
+        }
+    }
+    
+    // If no node found before current time, use last node (wrap around from previous day)
+    if (!activeNode) {
+        activeNode = sorted[sorted.length - 1];
+    }
+    
+    return activeNode.temp;
+}

custom_components/climate_scheduler/manifest.json

@@ -0,0 +1,20 @@
+{
+    "domain":  "climate_scheduler",
+    "name":  "Climate Scheduler",
+    "codeowners":  [
+                       "@kneave"
+                   ],
+    "config_flow":  true,
+    "dependencies":  [
+                         "climate",
+                         "http"
+                     ],
+    "documentation":  "https://github.com/kneave/climate-scheduler",
+    "integration_type":  "hub",
+    "iot_class":  "local_polling",
+    "issue_tracker":  "https://github.com/kneave/climate-scheduler/issues",
+    "requirements":  [
+
+                     ],
+    "version":  "1.15.1"
+}

custom_components/climate_scheduler/sensor.py

@@ -0,0 +1,452 @@
+"""Sensor platform for Climate Scheduler."""
+import logging
+from datetime import timedelta
+from typing import Any
+
+from homeassistant.components.sensor import (
+    SensorDeviceClass,
+    SensorEntity,
+    SensorStateClass,
+)
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import UnitOfTemperature
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers import device_registry as dr
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.event import async_track_state_change_event
+from homeassistant.util import dt as dt_util
+
+from .const import DOMAIN
+
+_LOGGER = logging.getLogger(__name__)
+
+# How many historical samples to keep for derivative calculation
+SAMPLE_SIZE = 10
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up Climate Scheduler sensors from a config entry."""
+    from homeassistant.helpers import device_registry as dr, entity_registry as er
+    
+    storage = hass.data[DOMAIN]["storage"]
+    coordinator = hass.data[DOMAIN]["coordinator"]
+    
+    # Get settings to check if derivative sensors are enabled
+    settings = storage._data.get("settings", {})
+    sensors = []
+    
+    # Always create coldest and warmest sensors
+    sensors.append(ColdestEntitySensor(hass, storage, coordinator))
+    sensors.append(WarmestEntitySensor(hass, storage, coordinator))
+    
+    if not settings.get("create_derivative_sensors", True):
+        async_add_entities(sensors, True)
+        return
+    
+    # Get registries
+    entity_registry = er.async_get(hass)
+    device_registry = dr.async_get(hass)
+    
+    # Get all entities from groups (both single and multi-entity groups)
+    all_entity_ids = await storage.async_get_all_entities()
+    
+    for entity_id in all_entity_ids:
+        # Skip ignored entities
+        if await storage.async_is_ignored(entity_id):
+            continue
+        
+        # Find the device for this climate entity
+        entity_entry = entity_registry.async_get(entity_id)
+        _LOGGER.debug(f"Entity entry for {entity_id}: {entity_entry}")
+        
+        device_id = None
+        if entity_entry and entity_entry.device_id:
+            device_id = entity_entry.device_id
+            _LOGGER.debug(f"Found device {device_id} for {entity_id}")
+        
+        # Create main temperature rate sensor
+        _LOGGER.debug(f"Creating derivative sensor for {entity_id}")
+        sensors.append(ClimateSchedulerRateSensor(hass, entity_id, entity_id, "current_temperature", device_id))
+        
+        if device_id:
+            # Find all sensor entities on the same device
+            device_sensors = [
+                entry for entry in entity_registry.entities.values()
+                if entry.device_id == device_id 
+                and entry.domain == "sensor"
+                and "floor" in entry.entity_id.lower()  # Look for "floor" in the entity_id
+            ]
+            
+            _LOGGER.debug(f"Found {len(device_sensors)} floor sensors for {entity_id}: {[s.entity_id for s in device_sensors]}")
+            
+            # Create derivative sensors for floor temperature sensors
+            for floor_sensor in device_sensors:
+                _LOGGER.debug(f"Creating floor derivative sensor for {entity_id} tracking {floor_sensor.entity_id}")
+                sensors.append(ClimateSchedulerRateSensor(
+                    hass, 
+                    entity_id,  # Associated climate entity
+                    floor_sensor.entity_id,  # Floor sensor to track
+                    "state",  # Use state instead of attribute
+                    device_id  # Link to same device
+                ))
+        else:
+            _LOGGER.warning(f"No device found for {entity_id}, skipping floor sensor detection")
+    
+    if sensors:
+        async_add_entities(sensors, True)
+
+
+class ClimateSchedulerRateSensor(SensorEntity):
+    """Sensor that tracks the rate of temperature change for a climate entity."""
+
+    def __init__(
+        self, 
+        hass: HomeAssistant, 
+        climate_entity_id: str, 
+        source_entity_id: str,
+        temperature_attribute: str = "current_temperature",
+        device_id: str = None
+    ) -> None:
+        """Initialize the sensor."""
+        self.hass = hass
+        self._climate_entity_id = climate_entity_id
+        self._source_entity_id = source_entity_id
+        self._temperature_attribute = temperature_attribute
+        self._device_id = device_id  # Store device_id for device_info
+        
+        # Extract name from entity_id (e.g., climate.bedroom -> bedroom)
+        entity_name = climate_entity_id.split(".")[-1]
+        friendly_name = entity_name.replace("_", " ").title()
+        
+        # Determine if this is a floor sensor (tracking a separate sensor entity)
+        is_floor = source_entity_id != climate_entity_id
+        
+        if is_floor:
+            # For floor sensors, include the floor sensor name in unique_id to avoid collisions
+            floor_sensor_name = source_entity_id.split(".")[-1]
+            # Strip any previously-created climate_scheduler prefix to avoid recursive names
+            if floor_sensor_name.startswith("climate_scheduler_"):
+                floor_sensor_name = floor_sensor_name[len("climate_scheduler_") :]
+            # Strip trailing _rate if present
+            if floor_sensor_name.endswith("_rate"):
+                floor_sensor_name = floor_sensor_name[: -len("_rate")]
+
+            # Prevent duplicated segments like "front_room_front_room_..."
+            if floor_sensor_name.startswith(f"{entity_name}_"):
+                floor_sensor_suffix = floor_sensor_name[len(entity_name) + 1 :]
+            else:
+                floor_sensor_suffix = floor_sensor_name
+
+            suffix = f"{floor_sensor_suffix.replace('_', ' ').title()} Rate"
+            unique_suffix = f"{floor_sensor_suffix}_rate"
+        else:
+            suffix = "Rate"
+            unique_suffix = "rate"
+        
+        _LOGGER.debug(f"Creating sensor climate_scheduler_{entity_name}_{unique_suffix} with device_id: {device_id}")
+        
+        self._attr_name = f"Climate Scheduler {friendly_name} {suffix}"
+        self._attr_unique_id = f"climate_scheduler_{entity_name}_{unique_suffix}"
+        # Let Home Assistant manage the `entity_id` from the `unique_id`
+        self._attr_device_class = None  # No standard device class for rate
+        self._attr_state_class = SensorStateClass.MEASUREMENT
+        self._attr_native_unit_of_measurement = "°C/h"
+        self._attr_icon = "mdi:thermometer-lines" if not is_floor else "mdi:floor-plan"
+        
+        # Storage for temperature samples (timestamp, temperature)
+        self._samples = []
+        self._attr_native_value = 0.0  # Start at 0 instead of None
+        
+        # Set device_info during initialization to ensure proper device linking
+        if device_id:
+            device_registry = dr.async_get(hass)
+            device = device_registry.async_get(device_id)
+            
+            if device:
+                self._attr_device_info = {
+                    "identifiers": device.identifiers,
+                }
+                _LOGGER.debug(f"Linked sensor {self._attr_unique_id} to device {device_id} with identifiers {device.identifiers}")
+            else:
+                _LOGGER.error(f"Could not find device {device_id} in registry for sensor {self._attr_unique_id}")
+        else:
+            _LOGGER.warning(f"No device_id provided for sensor {self._attr_unique_id}")
+    
+    async def async_added_to_hass(self) -> None:
+        """Register state listener when entity is added."""
+        # Listen to state changes of the source entity
+        self.async_on_remove(
+            async_track_state_change_event(
+                self.hass,
+                [self._source_entity_id],
+                self._async_source_state_changed,
+            )
+        )
+        
+        # Get initial state
+        state = self.hass.states.get(self._source_entity_id)
+        if state:
+            # For separate sensor entities, use the state value
+            if self._temperature_attribute == "state":
+                try:
+                    temp = float(state.state)
+                    now = dt_util.utcnow()
+                    self._samples.append((now, temp))
+                except (ValueError, TypeError):
+                    pass
+            # For climate entity attributes, use the attribute
+            elif state.attributes.get(self._temperature_attribute) is not None:
+                temp = float(state.attributes[self._temperature_attribute])
+                now = dt_util.utcnow()
+                self._samples.append((now, temp))
+
+    @callback
+    def _async_source_state_changed(self, event) -> None:
+        """Handle source entity state changes."""
+        new_state = event.data.get("new_state")
+        if not new_state:
+            return
+        
+        try:
+            # For separate sensor entities, use the state value
+            if self._temperature_attribute == "state":
+                temp = float(new_state.state)
+            # For climate entity attributes, use the attribute
+            else:
+                current_temp = new_state.attributes.get(self._temperature_attribute)
+                if current_temp is None:
+                    return
+                temp = float(current_temp)
+            now = dt_util.utcnow()
+            
+            # Add new sample
+            self._samples.append((now, temp))
+            
+            # Keep only last SAMPLE_SIZE samples
+            if len(self._samples) > SAMPLE_SIZE:
+                self._samples = self._samples[-SAMPLE_SIZE:]
+            
+            # Calculate derivative if we have enough samples
+            if len(self._samples) >= 2:
+                self._calculate_rate()
+            
+            self.async_write_ha_state()
+        except (ValueError, TypeError) as e:
+            _LOGGER.debug(f"Error processing temperature for {self._climate_entity_id}: {e}")
+
+    def _calculate_rate(self) -> None:
+        """Calculate the rate of temperature change."""
+        if len(self._samples) < 2:
+            self._attr_native_value = 0.0  # Not enough data, rate is 0
+            return
+        
+        # Get oldest and newest samples
+        oldest_time, oldest_temp = self._samples[0]
+        newest_time, newest_temp = self._samples[-1]
+        
+        # Calculate time difference in hours
+        time_diff = (newest_time - oldest_time).total_seconds() / 3600
+        
+        if time_diff == 0:
+            self._attr_native_value = 0.0
+            return
+        
+        # Calculate temperature change rate (°C per hour)
+        temp_diff = newest_temp - oldest_temp
+        rate = temp_diff / time_diff
+        
+        # Round to 2 decimal places
+        self._attr_native_value = round(rate, 2)
+
+    @property
+    def extra_state_attributes(self) -> dict[str, Any]:
+        """Return additional state attributes."""
+        return {
+            "climate_entity": self._climate_entity_id,
+            "source_entity": self._source_entity_id,
+            "temperature_attribute": self._temperature_attribute,
+            "sample_count": len(self._samples),
+            "time_window_minutes": 5,
+        }
+
+
+class ColdestEntitySensor(SensorEntity):
+    """Sensor that shows the coldest climate entity."""
+
+    def __init__(
+        self, 
+        hass: HomeAssistant,
+        storage,
+        coordinator
+    ) -> None:
+        """Initialize the sensor."""
+        self.hass = hass
+        self._storage = storage
+        self._coordinator = coordinator
+        
+        self._attr_name = "Climate Scheduler Coldest Entity"
+        self._attr_unique_id = "climate_scheduler_coldest_entity"
+        # Let Home Assistant manage the `entity_id` from the `unique_id`
+        self._attr_device_class = SensorDeviceClass.TEMPERATURE
+        self._attr_state_class = SensorStateClass.MEASUREMENT
+        self._attr_native_unit_of_measurement = UnitOfTemperature.CELSIUS
+        self._attr_icon = "mdi:snowflake"
+        self._attr_native_value = None
+        self._coldest_entity_id = None
+        self._coldest_friendly_name = None
+        self._remove_listener = None
+    
+    async def async_added_to_hass(self) -> None:
+        """Register state listener when entity is added."""
+        # Listen to coordinator updates
+        self._remove_listener = self._coordinator.async_add_listener(self._handle_coordinator_update)
+        # Initial update
+        await self._async_update()
+
+    async def async_will_remove_from_hass(self) -> None:
+        """Unregister listener when entity is removed."""
+        if self._remove_listener:
+            self._remove_listener()
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.hass.async_create_task(self._async_update())
+
+    async def _async_update(self) -> None:
+        """Update the sensor value."""
+        # Get all entities from groups
+        all_entities = await self._storage.async_get_all_entities()
+        
+        coldest_temp = None
+        coldest_entity = None
+        coldest_name = None
+        
+        for entity_id in all_entities:
+            # Skip ignored entities
+            if await self._storage.async_is_ignored(entity_id):
+                continue
+            
+            state = self.hass.states.get(entity_id)
+            if not state:
+                continue
+            
+            # Check if entity has current_temperature attribute
+            current_temp = state.attributes.get("current_temperature")
+            if current_temp is None:
+                continue
+            
+            try:
+                temp = float(current_temp)
+                if coldest_temp is None or temp < coldest_temp:
+                    coldest_temp = temp
+                    coldest_entity = entity_id
+                    coldest_name = state.attributes.get("friendly_name", entity_id)
+            except (ValueError, TypeError):
+                continue
+        
+        self._attr_native_value = coldest_temp
+        self._coldest_entity_id = coldest_entity
+        self._coldest_friendly_name = coldest_name
+        self.async_write_ha_state()
+
+    @property
+    def extra_state_attributes(self) -> dict[str, Any]:
+        """Return additional state attributes."""
+        return {
+            "entity_id": self._coldest_entity_id,
+            "friendly_name": self._coldest_friendly_name,
+        }
+
+
+class WarmestEntitySensor(SensorEntity):
+    """Sensor that shows the warmest climate entity."""
+
+    def __init__(
+        self, 
+        hass: HomeAssistant,
+        storage,
+        coordinator
+    ) -> None:
+        """Initialize the sensor."""
+        self.hass = hass
+        self._storage = storage
+        self._coordinator = coordinator
+        
+        self._attr_name = "Climate Scheduler Warmest Entity"
+        self._attr_unique_id = "climate_scheduler_warmest_entity"
+        # Let Home Assistant manage the `entity_id` from the `unique_id`
+        self._attr_device_class = SensorDeviceClass.TEMPERATURE
+        self._attr_state_class = SensorStateClass.MEASUREMENT
+        self._attr_native_unit_of_measurement = UnitOfTemperature.CELSIUS
+        self._attr_icon = "mdi:fire"
+        self._attr_native_value = None
+        self._warmest_entity_id = None
+        self._warmest_friendly_name = None
+        self._remove_listener = None
+    
+    async def async_added_to_hass(self) -> None:
+        """Register state listener when entity is added."""
+        # Listen to coordinator updates
+        self._remove_listener = self._coordinator.async_add_listener(self._handle_coordinator_update)
+        # Initial update
+        await self._async_update()
+
+    async def async_will_remove_from_hass(self) -> None:
+        """Unregister listener when entity is removed."""
+        if self._remove_listener:
+            self._remove_listener()
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.hass.async_create_task(self._async_update())
+
+    async def _async_update(self) -> None:
+        """Update the sensor value."""
+        # Get all entities from groups
+        all_entities = await self._storage.async_get_all_entities()
+        
+        warmest_temp = None
+        warmest_entity = None
+        warmest_name = None
+        
+        for entity_id in all_entities:
+            # Skip ignored entities
+            if await self._storage.async_is_ignored(entity_id):
+                continue
+            
+            state = self.hass.states.get(entity_id)
+            if not state:
+                continue
+            
+            # Check if entity has current_temperature attribute
+            current_temp = state.attributes.get("current_temperature")
+            if current_temp is None:
+                continue
+            
+            try:
+                temp = float(current_temp)
+                if warmest_temp is None or temp > warmest_temp:
+                    warmest_temp = temp
+                    warmest_entity = entity_id
+                    warmest_name = state.attributes.get("friendly_name", entity_id)
+            except (ValueError, TypeError):
+                continue
+        
+        self._attr_native_value = warmest_temp
+        self._warmest_entity_id = warmest_entity
+        self._warmest_friendly_name = warmest_name
+        self.async_write_ha_state()
+
+    @property
+    def extra_state_attributes(self) -> dict[str, Any]:
+        """Return additional state attributes."""
+        return {
+            "entity_id": self._warmest_entity_id,
+            "friendly_name": self._warmest_friendly_name,
+        }

custom_components/climate_scheduler/services.yaml

@@ -0,0 +1,499 @@
+# Static service definitions for Climate Scheduler.
+# These provide UI documentation and selectors. The services are still
+# registered dynamically in Python; keep this file up-to-date when fields
+# or selectors change.
+
+recreate_all_sensors:
+  name: Recreate all sensors
+  description: >-
+    Delete ALL Climate Scheduler sensor entities and reload the integration to
+    recreate them cleanly. Requires confirmation.
+  fields:
+    confirm:
+      description: Must be set to true to confirm deletion of all sensors
+      example: true
+      required: true
+      selector:
+        boolean: {}
+
+cleanup_malformed_sensors:
+  name: Cleanup malformed sensors
+  description: >-
+    Scan for unexpected Climate Scheduler sensor entities and optionally remove
+    them. Returns expected and unexpected sensor entity lists.
+  fields:
+    delete:
+      description: Whether to actually delete the unexpected entities (default
+        is false for dry-run)
+      required: false
+      example: true
+      selector:
+        boolean: {}
+
+cleanup_orphaned_climate_entities:
+  name: Cleanup orphaned entities
+  description: >-
+    Scan for orphaned Climate Scheduler entities (climate, sensor, and switch entities without matching
+    groups or climate entities in storage) and optionally remove them. Returns expected count and orphaned entity lists.
+  fields:
+    delete:
+      description: Whether to actually delete the orphaned entities (default
+        is false for dry-run)
+      required: false
+      example: true
+      selector:
+        boolean: {}
+
+set_schedule:
+  name: Set climate schedule
+  description: Configure temperature schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      example: climate.living_room
+      selector:
+        entity:
+          domain: climate
+    nodes:
+      description: >-
+        List of schedule nodes with time and temperature (JSON string).
+      required: true
+      example: '[{"time": "07:00", "temp": 21}, {"time": "23:00", "temp": 18}]'
+    day:
+      description: Day of week for this schedule (all_days, mon, tue, wed, thu,
+        fri, sat, sun, weekday, weekend)
+      required: false
+      default: all_days
+      selector:
+        text: {}
+    schedule_mode:
+      description: Schedule mode (all_days, 5/2, individual)
+      required: false
+      default: all_days
+      selector:
+        text: {}
+
+
+get_schedule:
+  name: Get climate schedule
+  description: Retrieve the current schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        entity:
+          domain: climate
+
+clear_schedule:
+  name: Clear climate schedule
+  description: Clear the schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        entity:
+          domain: climate
+
+enable_schedule:
+  name: Enable schedule
+  description: Enable the schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        text: {}
+
+disable_schedule:
+  name: Disable schedule
+  description: Disable the schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        text: {}
+
+set_ignored:
+  name: Set ignored status
+  description: Mark a schedule target as ignored or not
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        text: {}
+    ignored:
+      description: True to ignore, False to un-ignore
+      required: true
+      selector:
+        boolean: {}
+
+sync_all:
+  name: Sync all
+  description: Force immediate sync of all thermostats managed by Climate Scheduler
+  fields: {}
+
+create_group:
+  name: Create group
+  description: Create a new Climate Scheduler group
+  fields:
+    schedule_id:
+      description: New group name
+      required: true
+      selector:
+        text: {}
+
+delete_group:
+  name: Delete group
+  description: Delete an existing group
+  fields:
+    schedule_id:
+      description: Group name to delete
+      required: true
+      selector:
+        text: {}
+
+rename_group:
+  name: Rename group
+  description: Rename an existing group
+  fields:
+    old_name:
+      description: Existing group name
+      required: true
+      selector:
+        text: {}
+    new_name:
+      description: New group name
+      required: true
+      selector:
+        text: {}
+
+add_to_group:
+  name: Add entity to group
+  description: Add a climate entity to a group
+  fields:
+    schedule_id:
+      description: Target group name
+      required: true
+      selector:
+        text: {}
+    entity_id:
+      description: Climate entity id to add
+      required: true
+      selector:
+        entity:
+          domain: climate
+
+remove_from_group:
+  name: Remove entity from group
+  description: Remove a climate entity from a group
+  fields:
+    schedule_id:
+      description: Target group name
+      required: true
+      selector:
+        text: {}
+    entity_id:
+      description: Climate entity id to remove
+      required: true
+      selector:
+        entity:
+          domain: climate
+
+get_groups:
+  name: Get groups
+  description: Return stored groups data
+  fields: {}
+
+list_groups:
+  name: List groups
+  description: Return a simple list of group names
+  fields: {}
+
+list_profiles:
+  name: List profiles
+  description: Return a list of profiles across all groups
+  fields: {}
+
+set_group_schedule:
+  name: Set group schedule
+  description: Set schedule for a whole group
+  fields:
+    schedule_id:
+      description: Target group name
+      required: true
+      selector:
+        text: {}
+    nodes:
+      description: JSON string of schedule nodes
+      required: true
+      selector:
+        text: {}
+    day:
+      description: Day identifier
+      required: false
+      selector:
+        text: {}
+    schedule_mode:
+      description: Schedule mode
+      required: false
+      selector:
+        text: {}
+
+enable_group:
+  name: Enable group
+  description: Enable a group's schedule
+  fields:
+    schedule_id:
+      description: Group name
+      required: true
+      selector:
+        text: {}
+
+disable_group:
+  name: Disable group
+  description: Disable a group's schedule
+  fields:
+    schedule_id:
+      description: Group name
+      required: true
+      selector:
+        text: {}
+
+get_settings:
+  name: Get settings
+  description: Retrieve current integration settings and version info
+  fields: {}
+
+save_settings:
+  name: Save settings
+  description: Save integration settings (JSON string)
+  fields:
+    settings:
+      description: Settings JSON string
+      required: true
+      selector:
+        text: {}
+
+reload_integration:
+  name: Reload integration
+  description: Reload the Climate Scheduler integration
+  fields: {}
+
+reregister_card:
+  name: Reregister card
+  description: >-
+    Automatically registers the Climate Scheduler card in Lovelace resources.
+    Removes any existing registrations and creates a fresh entry.
+    Use this if the card is not appearing in the card picker.
+  fields:
+    resource_url:
+      description: >-
+        (Optional) Custom URL for the card resource. If not provided,
+        automatically uses the bundled card with the current integration version.
+      required: false
+      example: /climate_scheduler/static/climate-scheduler-card.js
+      selector:
+        text: {}
+    resource_type:
+      description: Resource type (e.g. `module` or `js`)
+      required: false
+      default: module
+      selector:
+        text: {}
+
+advance_schedule:
+  name: Advance schedule
+  description: Temporarily advance a schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID
+      required: true
+      selector:
+        text: {}
+
+advance_group:
+  name: Advance group
+  description: Advance schedule for a group
+  fields:
+    schedule_id:
+      description: Group name
+      required: true
+      selector:
+        text: {}
+
+cancel_advance:
+  name: Cancel advance
+  description: Cancel an advanced schedule for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id)
+      required: true
+      selector:
+        text: {}
+
+get_advance_status:
+  name: Get advance status
+  description: Get current advance status for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id)
+      required: true
+      selector:
+        text: {}
+
+clear_advance_history:
+  name: Clear advance history
+  description: Clear the advance history for a schedule target
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id)
+      required: true
+      selector:
+        text: {}
+
+test_fire_event:
+  name: Test fire event
+  description: Fire a test node_activated event with specific node settings for testing automations
+  fields:
+    schedule_id:
+      description: Group name or entity ID to fire event for
+      required: true
+      example: Downstairs
+      selector:
+        text: {}
+    node:
+      description: Node data (time, temp, hvac_mode, etc.) as JSON string
+      required: false
+      example: '{"time": "08:00", "temp": 21, "hvac_mode": "heat"}'
+      selector:
+        text: {}
+    day:
+      description: Day of week (mon, tue, wed, thu, fri, sat, sun)
+      required: false
+      example: mon
+      selector:
+        text: {}
+
+create_profile:
+  name: Create profile
+  description: Create a profile for a schedule
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id or group id)
+      required: true
+      selector:
+        text: {}
+    profile_name:
+      description: New profile name
+      required: true
+      selector:
+        text: {}
+
+delete_profile:
+  name: Delete profile
+  description: Delete a profile from a schedule
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id or group id)
+      required: true
+      selector:
+        text: {}
+    profile_name:
+      description: Profile name to delete
+      required: true
+      selector:
+        text: {}
+
+rename_profile:
+  name: Rename profile
+  description: Rename a profile
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id or group id)
+      required: true
+      selector:
+        text: {}
+    old_name:
+      description: Existing profile name
+      required: true
+      selector:
+        text: {}
+    new_name:
+      description: New profile name
+      required: true
+      selector:
+        text: {}
+
+set_active_profile:
+  name: Set active profile
+  description: Set the active profile for a schedule
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id or group id)
+      required: true
+      selector:
+        text: {}
+    profile_name:
+      description: Profile name to set active
+      required: true
+      selector:
+        text: {}
+
+get_profiles:
+  name: Get profiles
+  description: Get profiles for a schedule
+  fields:
+    schedule_id:
+      description: Schedule ID (entity id or group id)
+      required: true
+      selector:
+        text: {}
+
+cleanup_derivative_sensors:
+  name: Cleanup derivative sensors
+  description: Remove derivative sensors based on auto-creation setting
+  fields:
+    confirm_delete_all:
+      description: Confirm deletion of all derivative sensors
+      required: false
+      default: false
+      example: false
+      selector:
+        boolean: {}
+
+cleanup_unmonitored_storage:
+  name: Cleanup unmonitored storage
+  description: >-
+    Remove stale storage references for unmonitored or missing entities,
+    including obsolete groups, invalid profiles, stale entity references,
+    and orphaned advance history entries.
+  fields:
+    delete:
+      description: Execute deletion; set false to preview only
+      required: false
+      default: false
+      example: true
+      selector:
+        boolean: {}
+
+factory_reset:
+  name: Factory reset
+  description: Reset all stored data
+  fields:
+    confirm:
+      description: Must be set to true to confirm factory reset
+      required: true
+      selector:
+        boolean: {}
+
+diagnostics:
+  name: Run diagnostics
+  description: >-
+    Run comprehensive diagnostics to troubleshoot card visibility issues.
+    Returns integration version, card registration status, and accessibility checks.
+    Use this when users report they cannot find the card in Lovelace.

custom_components/climate_scheduler/switch.py

@@ -0,0 +1,421 @@
+"""Switch platform for Climate Scheduler - Exposes schedules in scheduler-component format."""
+import logging
+import hashlib
+from datetime import datetime, time, timedelta
+from typing import Any, Dict, List, Optional
+
+from homeassistant.components.switch import SwitchEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+from homeassistant.util import dt as dt_util
+
+from .const import DOMAIN
+
+_LOGGER = logging.getLogger(__name__)
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up Climate Scheduler switch entities from a config entry."""
+    from homeassistant.helpers import entity_registry as er
+    
+    storage = hass.data[DOMAIN]["storage"]
+    coordinator = hass.data[DOMAIN]["coordinator"]
+    entity_registry = er.async_get(hass)
+    
+    # Clean up old switch entities that don't have the token suffix
+    # (These are from before we added the unique_id token)
+    old_entities_removed = 0
+    for entry in list(entity_registry.entities.values()):
+        if entry.platform != DOMAIN or entry.domain != "switch":
+            continue
+        
+        # Old entities have unique_id like "climate_scheduler_schedule_bathroom"
+        # New entities have unique_id like "climate_scheduler_schedule_climate.bathroom_abc123"
+        # or "climate_scheduler_schedule_Bathroom_abc123"
+        if entry.unique_id and entry.unique_id.startswith(f"{DOMAIN}_schedule_"):
+            # Check if it's missing the token (no underscore followed by 6 hex chars at the end)
+            parts = entry.unique_id.split("_")
+            last_part = parts[-1] if parts else ""
+            
+            # If the last part is not a 6-character hex token, it's an old entity
+            if len(last_part) != 6 or not all(c in "0123456789abcdef" for c in last_part.lower()):
+                _LOGGER.info(f"Removing old scheduler entity: {entry.entity_id} (unique_id: {entry.unique_id})")
+                entity_registry.async_remove(entry.entity_id)
+                old_entities_removed += 1
+    
+    if old_entities_removed > 0:
+        _LOGGER.info(f"Removed {old_entities_removed} old scheduler switch entities")
+    
+    switches = []
+    
+    # Create switch entity for each group (including single-entity groups)
+    all_groups = await storage.async_get_groups()
+    for group_name, group_data in all_groups.items():
+        # Skip ignored groups
+        if group_data.get("ignored", False):
+            continue
+        
+        switches.append(ClimateSchedulerSwitch(
+            hass,
+            coordinator,
+            storage,
+            group_name,
+            group_data
+        ))
+    
+    if switches:
+        async_add_entities(switches, True)
+        _LOGGER.info(f"Created {len(switches)} scheduler switch entities")
+
+
+class ClimateSchedulerSwitch(CoordinatorEntity, SwitchEntity):
+    """Switch entity that exposes a climate schedule in scheduler-component format."""
+
+    def __init__(
+        self,
+        hass: HomeAssistant,
+        coordinator,
+        storage,
+        group_name: str,
+        group_data: Dict[str, Any],
+    ) -> None:
+        """Initialize the switch."""
+        super().__init__(coordinator)
+        self.hass = hass
+        self.storage = storage
+        self._group_name = group_name
+        self._group_data = group_data
+        
+        # Generate a stable token for the entity_id (6 chars like scheduler-component)
+        token = hashlib.md5(group_name.encode()).hexdigest()[:6]
+        
+        # For single-entity groups, use a cleaner name
+        if group_name.startswith("__entity_"):
+            entity_id = group_name.replace("__entity_", "")
+            self._attr_name = f"Schedule {entity_id.split('.')[-1]}"
+            self._attr_unique_id = f"{DOMAIN}_schedule_{entity_id}_{token}"
+        else:
+            self._attr_name = f"Schedule {group_name}"
+            self._attr_unique_id = f"{DOMAIN}_schedule_{group_name}_{token}"
+        
+        self._attr_has_entity_name = False
+        self._attr_should_poll = True
+        
+        # Cache for computed attributes
+        self._cached_next_trigger: Optional[datetime] = None
+        self._cached_next_slot: Optional[int] = None
+        self._cached_actions: List[Dict[str, Any]] = []
+        self._cached_next_entries: List[Dict[str, Any]] = []
+
+    @property
+    def is_on(self) -> bool:
+        """Return true if schedule is enabled."""
+        # Refresh group data from storage
+        self._refresh_group_data()
+        return self._group_data.get("enabled", True)
+
+    @property
+    def state(self) -> str:
+        """Return the state of the scheduler.
+        
+        States match scheduler-component:
+        - off: Schedule is disabled
+        - on: Schedule is enabled and waiting for next trigger
+        - triggered: Currently executing (we'll use this briefly after firing)
+        """
+        if not self.is_on:
+            return "off"
+        
+        # Check if this was recently triggered (within last minute)
+        # For now, we'll just return "on" - can enhance later
+        return "on"
+
+    @property
+    def extra_state_attributes(self) -> Dict[str, Any]:
+        """Return scheduler-component compatible attributes."""
+        self._refresh_group_data()
+        self._compute_schedule_attributes()
+        
+        active_profile = self._group_data.get("active_profile", "Default")
+        profiles = self._group_data.get("profiles", {})
+        profile_data = profiles.get(active_profile, {})
+        
+        schedule_mode = profile_data.get("schedule_mode", "all_days")
+        schedules = profile_data.get("schedules", {})
+        
+        # Get entities affected by this schedule
+        entities = self._group_data.get("entities", [])
+        
+        attrs = {
+            # Core scheduler-component attributes
+            "next_trigger": self._cached_next_trigger.isoformat() if self._cached_next_trigger else None,
+            "next_slot": self._cached_next_slot,
+            "actions": self._cached_actions,
+            
+            # Fallback format
+            "next_entries": self._cached_next_entries,
+            
+            # Additional metadata
+            "schedule_mode": schedule_mode,
+            "schedules": schedules,
+            "active_profile": active_profile,
+            "profiles": list(profiles.keys()),
+            "entities": entities,
+            
+            # Compatibility fields
+            "weekdays": self._get_weekdays_list(schedule_mode),
+            "timeslots": self._cached_actions,  # Alias
+        }
+        
+        return attrs
+
+    def _refresh_group_data(self) -> None:
+        """Refresh group data from storage."""
+        # This is called frequently, so we cache the lookup
+        import asyncio
+        if asyncio.iscoroutinefunction(self.storage.async_get_group):
+            # Can't call async from sync property, so we'll need to handle this differently
+            # For now, keep the cached version and update on coordinator updates
+            pass
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        # Refresh group data when coordinator updates
+        loop = self.hass.loop
+        if loop and loop.is_running():
+            loop.create_task(self._async_refresh_group_data())
+        self.async_write_ha_state()
+
+    async def _async_refresh_group_data(self) -> None:
+        """Async refresh of group data."""
+        group_data = await self.storage.async_get_group(self._group_name)
+        if group_data:
+            self._group_data = group_data
+
+    def _compute_schedule_attributes(self) -> None:
+        """Compute next_trigger, next_slot, actions, and next_entries."""
+        now = dt_util.now()
+        current_time = now.time()
+        current_day = now.strftime("%a").lower()  # mon, tue, wed, etc.
+        
+        active_profile = self._group_data.get("active_profile", "Default")
+        profiles = self._group_data.get("profiles", {})
+        profile_data = profiles.get(active_profile, {})
+        
+        schedule_mode = profile_data.get("schedule_mode", "all_days")
+        schedules = profile_data.get("schedules", {})
+        
+        # Determine which schedule to use based on mode and current day
+        current_schedule = self._get_schedule_for_day(schedules, schedule_mode, current_day)
+        
+        if not current_schedule:
+            self._cached_next_trigger = None
+            self._cached_next_slot = None
+            self._cached_actions = []
+            self._cached_next_entries = []
+            return
+        
+        # Sort nodes by time
+        sorted_nodes = sorted(current_schedule, key=lambda n: self._time_str_to_minutes(n.get("time", "00:00")))
+        
+        # Find next node
+        next_node = None
+        next_node_index = None
+        
+        for idx, node in enumerate(sorted_nodes):
+            node_time_str = node.get("time", "00:00")
+            node_minutes = self._time_str_to_minutes(node_time_str)
+            current_minutes = current_time.hour * 60 + current_time.minute
+            
+            if node_minutes > current_minutes:
+                next_node = node
+                next_node_index = idx
+                break
+        
+        # If no node found after current time, use first node tomorrow
+        if next_node is None and sorted_nodes:
+            next_node = sorted_nodes[0]
+            next_node_index = 0
+            # Add one day
+            next_trigger_dt = now.replace(hour=0, minute=0, second=0, microsecond=0) + timedelta(days=1)
+        else:
+            next_trigger_dt = now.replace(hour=0, minute=0, second=0, microsecond=0)
+        
+        if next_node:
+            # Parse time
+            time_str = next_node.get("time", "00:00")
+            try:
+                hours, minutes = time_str.split(":")
+                next_trigger_dt = next_trigger_dt.replace(hour=int(hours), minute=int(minutes))
+            except (ValueError, AttributeError):
+                _LOGGER.warning(f"Invalid time format: {time_str}")
+                next_trigger_dt = None
+            
+            self._cached_next_trigger = next_trigger_dt
+            self._cached_next_slot = next_node_index
+            
+            # Build actions list for all nodes
+            entities = self._group_data.get("entities", [])
+            
+            # If entities list is empty, try to derive from group name for single-entity groups
+            if not entities and self._group_name.startswith("__entity_"):
+                entities = [self._group_name.replace("__entity_", "")]
+                _LOGGER.debug(f"Derived entity from group name: {entities}")
+            
+            self._cached_actions = []
+            
+            for node in sorted_nodes:
+                temp = node.get("temp")
+                
+                # If still no entities, create a generic action without entity_id
+                # This allows the data structure to be populated even if entities are missing
+                if not entities:
+                    action = {
+                        "entity_id": "unknown",
+                        "service": "climate.set_temperature",
+                        "data": {"temperature": temp}
+                    }
+                    
+                    # Add HVAC mode if present
+                    if "hvac_mode" in node:
+                        action["data"]["hvac_mode"] = node["hvac_mode"]
+                    
+                    # Add preset mode if present
+                    if "preset_mode" in node:
+                        action["service"] = "climate.set_preset_mode"
+                        action["data"] = {"preset_mode": node["preset_mode"]}
+                    
+                    self._cached_actions.append(action)
+                else:
+                    # Normal case: create actions for each entity
+                    for entity_id in entities:
+                        action = {
+                            "entity_id": entity_id,
+                            "service": "climate.set_temperature",
+                            "data": {"temperature": temp}
+                        }
+                        
+                        # Add HVAC mode if present
+                        if "hvac_mode" in node:
+                            action["data"]["hvac_mode"] = node["hvac_mode"]
+                        
+                        # Add preset mode if present
+                        if "preset_mode" in node:
+                            action["service"] = "climate.set_preset_mode"
+                            action["data"] = {"preset_mode": node["preset_mode"]}
+                        
+                        self._cached_actions.append(action)
+            
+            # Build next_entries (fallback format)
+            self._cached_next_entries = []
+            for node in sorted_nodes:
+                temp = node.get("temp")
+                time_str = node.get("time", "00:00")
+                
+                # Calculate absolute datetime for this node
+                try:
+                    hours, minutes = time_str.split(":")
+                    node_dt = now.replace(hour=int(hours), minute=int(minutes), second=0, microsecond=0)
+                    
+                    # If node time is in the past today, it's for tomorrow
+                    if node_dt < now:
+                        node_dt += timedelta(days=1)
+                    
+                    entry_actions = []
+                    
+                    # If still no entities, create a generic action
+                    if not entities:
+                        entry_actions.append({
+                            "entity_id": "unknown",
+                            "service": "climate.set_temperature",
+                            "data": {"temperature": temp}
+                        })
+                    else:
+                        for entity_id in entities:
+                            entry_actions.append({
+                                "entity_id": entity_id,
+                                "service": "climate.set_temperature",
+                                "data": {"temperature": temp}
+                            })
+                    
+                    self._cached_next_entries.append({
+                        "time": node_dt.isoformat(),
+                        "trigger_time": node_dt.isoformat(),
+                        "actions": entry_actions
+                    })
+                except (ValueError, AttributeError):
+                    continue
+        else:
+            self._cached_next_trigger = None
+            self._cached_next_slot = None
+            self._cached_actions = []
+            self._cached_next_entries = []
+
+    def _get_schedule_for_day(
+        self,
+        schedules: Dict[str, List[Dict[str, Any]]],
+        schedule_mode: str,
+        current_day: str
+    ) -> List[Dict[str, Any]]:
+        """Get the appropriate schedule for the current day."""
+        if schedule_mode == "all_days":
+            return schedules.get("all_days", [])
+        elif schedule_mode == "5/2":
+            if current_day in ["mon", "tue", "wed", "thu", "fri"]:
+                return schedules.get("weekday", [])
+            else:
+                return schedules.get("weekend", [])
+        elif schedule_mode == "individual":
+            return schedules.get(current_day, [])
+        else:
+            return schedules.get("all_days", [])
+
+    def _get_weekdays_list(self, schedule_mode: str) -> List[str]:
+        """Get weekdays list for scheduler-component compatibility."""
+        if schedule_mode == "all_days":
+            return ["daily"]
+        elif schedule_mode == "5/2":
+            return ["workday", "weekend"]
+        elif schedule_mode == "individual":
+            return ["mon", "tue", "wed", "thu", "fri", "sat", "sun"]
+        else:
+            return ["daily"]
+
+    @staticmethod
+    def _time_str_to_minutes(time_str: str) -> int:
+        """Convert HH:MM string to minutes since midnight."""
+        try:
+            hours, minutes = time_str.split(":")
+            return int(hours) * 60 + int(minutes)
+        except (ValueError, AttributeError):
+            return 0
+
+    async def async_turn_on(self, **kwargs: Any) -> None:
+        """Enable the schedule."""
+        await self.storage.async_enable_schedule(self._group_name)
+        await self.coordinator.async_request_refresh()
+        self.async_write_ha_state()
+
+    async def async_turn_off(self, **kwargs: Any) -> None:
+        """Disable the schedule."""
+        await self.storage.async_disable_schedule(self._group_name)
+        await self.coordinator.async_request_refresh()
+        self.async_write_ha_state()
+
+    @property
+    def device_info(self) -> Dict[str, Any]:
+        """Return device info for this scheduler."""
+        return {
+            "identifiers": {(DOMAIN, f"scheduler_{self._group_name}")},
+            "name": self._attr_name,
+            "manufacturer": "Climate Scheduler",
+            "model": "Schedule Controller",
+            "sw_version": "1.0",
+        }

custom_components/climate_scheduler/translations/en.json

@@ -0,0 +1,151 @@
+{
+  "title": "Climate Scheduler",
+  "config": {
+    "step": {
+      "user": {
+        "title": "Configure Climate Scheduler",
+        "description": "Climate Scheduler is ready to use. No additional configuration needed."
+      }
+    }
+  },
+  "services": {
+    "set_schedule": {
+      "name": "Set climate schedule",
+      "description": "Configure temperature schedule for a schedule target"
+    },
+    "get_schedule": {
+      "name": "Get climate schedule",
+      "description": "Retrieve the current schedule for a schedule target"
+    },
+    "clear_schedule": {
+      "name": "Clear climate schedule",
+      "description": "Clear the schedule for a schedule target"
+    },
+    "enable_schedule": {
+      "name": "Enable climate schedule",
+      "description": "Enable the schedule for a schedule target"
+    },
+    "disable_schedule": {
+      "name": "Disable climate schedule",
+      "description": "Disable the schedule for a schedule target"
+    },
+    "create_group": {
+      "name": "Create thermostat group",
+      "description": "Create a new group to share schedules between multiple thermostats"
+    },
+    "delete_group": {
+      "name": "Delete thermostat group",
+      "description": "Delete a thermostat group"
+    },
+    "add_to_group": {
+      "name": "Add thermostat to group",
+      "description": "Add a climate entity to a group"
+    },
+    "remove_from_group": {
+      "name": "Remove thermostat from group",
+      "description": "Remove a climate entity from a group"
+    },
+    "get_groups": {
+      "name": "Get all groups",
+      "description": "Retrieve all thermostat groups"
+    },
+    "set_group_schedule": {
+      "name": "Set group schedule",
+      "description": "Set schedule for all thermostats in a group"
+    },
+    "sync_all": {
+      "name": "Sync all thermostats",
+      "description": "Force synchronization of all enabled thermostats with their schedules"
+    },
+    "enable_group": {
+      "name": "Enable group schedule",
+      "description": "Enable automatic scheduling for all thermostats in a group"
+    },
+    "disable_group": {
+      "name": "Disable group schedule",
+      "description": "Disable automatic scheduling for all thermostats in a group"
+    },
+    "get_settings": {
+      "name": "Get settings",
+      "description": "Retrieve global integration settings (min/max temp, default schedule, etc.)"
+    },
+    "save_settings": {
+      "name": "Save settings",
+      "description": "Save global integration settings"
+    },
+    "reload_integration": {
+      "name": "Reload integration (Dev)",
+      "description": "Reload the Climate Scheduler integration (development only)"
+    }
+    ,
+    "reregister_card": {
+      "name": "Reregister card",
+      "description": "Automatically registers the Climate Scheduler card in Lovelace resources. Removes any existing registrations and creates a fresh entry."
+    }
+    ,
+    "recreate_all_sensors": {
+      "name": "Recreate all sensors",
+      "description": "Delete and recreate all derivative sensors"
+    },
+    "cleanup_malformed_sensors": {
+      "name": "Cleanup malformed sensors",
+      "description": "Scan for unexpected derivative sensors and optionally remove them"
+    },
+    "set_ignored": {
+      "name": "Set ignored",
+      "description": "Mark a schedule target as ignored or not"
+    },
+    "advance_schedule": {
+      "name": "Advance schedule",
+      "description": "Temporarily advance a schedule for a schedule target"
+    },
+    "advance_group": {
+      "name": "Advance group",
+      "description": "Temporarily advance schedules for a group"
+    },
+    "cancel_advance": {
+      "name": "Cancel advance",
+      "description": "Cancel an advanced schedule action for a schedule target"
+    },
+    "get_advance_status": {
+      "name": "Get advance status",
+      "description": "Get current advance status for a schedule target"
+    },
+    "clear_advance_history": {
+      "name": "Clear advance history",
+      "description": "Clear stored advance history for a schedule target"
+    },
+    "test_fire_event": {
+      "name": "Test fire event",
+      "description": "Fire a test node_activated event with the current active node settings for testing automations"
+    },
+    "create_profile": {
+      "name": "Create profile",
+      "description": "Create a profile for a schedule"
+    },
+    "delete_profile": {
+      "name": "Delete profile",
+      "description": "Delete a profile from a schedule"
+    },
+    "rename_profile": {
+      "name": "Rename profile",
+      "description": "Rename a profile"
+    },
+    "set_active_profile": {
+      "name": "Set active profile",
+      "description": "Set the active profile for a schedule"
+    },
+    "get_profiles": {
+      "name": "Get profiles",
+      "description": "Get profiles for a schedule"
+    },
+    "cleanup_derivative_sensors": {
+      "name": "Cleanup derivative sensors",
+      "description": "Remove derivative sensors based on the auto-creation setting"
+    },
+    "factory_reset": {
+      "name": "Factory reset",
+      "description": "Reset all Climate Scheduler data to a fresh state (destructive)"
+    }
+  }
+}

custom_components/climate_scheduler/translations/sk.json

@@ -0,0 +1,151 @@
+{
+  "title": "Climate Scheduler",
+  "config": {
+    "step": {
+      "user": {
+        "title": "Konfigurácia plánovača klimatizácie",
+        "description": "Plánovač klimatizácie je pripravený na použitie. Nie je potrebná žiadna ďalšia konfigurácia."
+      }
+    }
+  },
+  "services": {
+    "set_schedule": {
+      "name": "Nastavenie klimatického harmonogramu",
+      "description": "Konfigurácia teplotného plánu pre cieľový plán"
+    },
+    "get_schedule": {
+      "name": "Získajte klimatický harmonogram",
+      "description": "Načítať aktuálny rozvrh pre cieľ rozvrhu"
+    },
+    "clear_schedule": {
+        "name": "Vymazať klimatický harmonogram",
+      "description": "Vymazať plán pre cieľ plánu"
+    },
+    "enable_schedule": {
+      "name": "Povoliť klimatický plán",
+      "description": "Povoliť plán pre cieľ plánu"
+    },
+    "disable_schedule": {
+      "name": "Zakázať klimatizačný plán",
+      "description": "Zakázať plán pre cieľ plánu"
+    },
+    "create_group": {
+      "name": "Vytvoriť skupinu termostatov",
+      "description": "Vytvorte novú skupinu na zdieľanie harmonogramov medzi viacerými termostatmi"
+    },
+    "delete_group": {
+      "name": "Odstrániť skupinu termostatov",
+      "description": "Odstrániť skupinu termostatov"
+    },
+    "add_to_group": {
+      "name": "Pridať termostat do skupiny",
+      "description": "Pridanie klimatickej entity do skupiny"
+    },
+    "remove_from_group": {
+      "name": "Odstrániť termostat zo skupiny",
+      "description": "Odstránenie klimatickej entity zo skupiny"
+    },
+    "get_groups": {
+      "name": "Získať všetky skupiny",
+      "description": "Načítať všetky skupiny termostatov"
+    },
+    "set_group_schedule": {
+      "name": "Nastaviť rozvrh skupiny",
+      "description": "Nastavenie plánu pre všetky termostaty v skupine"
+    },
+    "sync_all": {
+      "name": "Synchronizovať všetky termostaty",
+      "description": "Vynútiť synchronizáciu všetkých povolených termostatov s ich harmonogramami"
+    },
+    "enable_group": {
+      "name": "Povoliť skupinový rozvrh",
+      "description": "Povoliť automatické plánovanie pre všetky termostaty v skupine"
+    },
+    "disable_group": {
+      "name": "Zakázať skupinový rozvrh",
+      "description": "Zakázať automatické plánovanie pre všetky termostaty v skupine"
+    },
+    "get_settings": {
+      "name": "Získať nastavenia",
+      "description": "Získanie globálnych nastavení integrácie (min./max. teplota, predvolený harmonogram atď.)"
+    },
+    "save_settings": {
+      "name": "Uložiť nastavenia",
+      "description": "Uložiť nastavenia globálnej integrácie"
+    },
+    "reload_integration": {
+      "name": "Integrácia obnovenia (vývojár)",
+      "description": "Obnoviť integráciu plánovača klimatizácie (iba pre vývojárov)"
+    }
+    ,
+    "reregister_card": {
+      "name": "Znovu zaregistrovať kartu",
+      "description": "Automaticky zaregistruje kartu Climate Scheduler v zdrojoch Lovelace. Odstráni existujúce registrácie a vytvorí novú."
+    }
+    ,
+    "recreate_all_sensors": {
+      "name": "Znovu vytvorte všetky senzory",
+      "description": "Odstráňte a znovu vytvorte všetky odvodené senzory"
+    },
+    "cleanup_malformed_sensors": {
+      "name": "Vyčistenie chybných senzorov",
+      "description": "Vyhľadajte neočakávané derivačné senzory a voliteľne ich odstráňte"
+    },
+    "set_ignored": {
+      "name": "Ignorované",
+      "description": "Označiť cieľ plánu ako ignorovaný alebo nie"
+    },
+    "advance_schedule": {
+      "name": "Pokročilý rozvrh",
+      "description": "Dočasný pokročilý plán pre cieľ plánu"
+    },
+    "advance_group": {
+      "name": "Pokročilá skupina",
+      "description": "Dočasné pokročilé rozvrhy pre skupinu"
+    },
+    "cancel_advance": {
+      "name": "Zrušiť pokročilé",
+      "description": "Zrušenie rozšírenej akcie plánovania pre cieľ plánovania"
+    },
+    "get_advance_status": {
+      "name": "Získať stav zálohy",
+      "description": "Získanie aktuálneho stavu zálohy pre cieľ plánu"
+    },
+    "clear_advance_history": {
+      "name": "Vymazať históriu záloh",
+      "description": "Vymazať uloženú históriu predbežných nastavení pre cieľ plánu"
+    },
+    "test_fire_event": {
+      "name": "Test fire event",
+      "description": "Fire a test node_activated event with the current active node settings for testing automations"
+    },
+    "create_profile": {
+      "name": "Vytvorriť profil",
+      "description": "Vytvorenie profilu pre rozvrh"
+    },
+    "delete_profile": {
+      "name": "Zmazať profil",
+      "description": "Odstránenie profilu z rozvrhu"
+    },
+    "rename_profile": {
+      "name": "Premenovať profil",
+      "description": "Premenovať profil"
+    },
+    "set_active_profile": {
+      "name": "Nastaviť aktívny profil",
+      "description": "Nastavenie aktívneho profilu pre plán"
+    },
+    "get_profiles": {
+      "name": "Získať profily",
+      "description": "Získajte profily pre rozvrh"
+    },
+    "cleanup_derivative_sensors": {
+      "name": "Čistenie derivačných senzorov",
+      "description": "Odstrániť odvodené senzory na základe nastavenia automatického vytvárania"
+    },
+    "factory_reset": {
+      "name": "Obnovenie továrenských nastavení",
+      "description": "Obnoviť všetky údaje plánovača klimatizácie do nového stavu (deštruktívne)"
+    }
+  }
+}

custom_components/intelligent_heating_pilot/__init__.py

@@ -0,0 +1,446 @@
+"""The Intelligent Heating Pilot integration - DDD Architecture.
+
+This module sets up the integration using a clean DDD architecture:
+- Domain: Pure business logic (entities, value objects, services)
+- Infrastructure: HA adapters (readers, commanders, event bridge)
+- Application: Use case orchestration
+
+The coordinator here is reduced to a thin setup/teardown manager.
+"""
+
+from __future__ import annotations
+
+import hashlib
+import logging
+
+import voluptuous as vol
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import EVENT_HOMEASSISTANT_STARTED, Platform
+from homeassistant.core import HomeAssistant, ServiceCall, SupportsResponse, callback
+from homeassistant.exceptions import ServiceValidationError
+from homeassistant.helpers import config_validation as cv
+from homeassistant.helpers import entity_registry as er
+from homeassistant.helpers.event import async_track_point_in_time
+from homeassistant.util import dt as dt_util
+
+from .const import CONF_IHP_ENABLED, DOMAIN, SERVICE_CALCULATE_ANTICIPATED_START_TIME
+from .heating_application import HeatingApplication
+from .utils.config_helpers import as_bool
+from .view import async_register_http_views
+
+_LOGGER = logging.getLogger(__name__)
+
+PLATFORMS: list[str] = [Platform.SENSOR, Platform.SWITCH]
+
+_STARTUP_UPDATE_BASE_DELAY_SECONDS = 5
+_STARTUP_UPDATE_JITTER_SECONDS = 55
+_STARTUP_EXTRACTION_BASE_DELAY_SECONDS = 120
+_STARTUP_EXTRACTION_JITTER_SECONDS = 600
+_LATE_UPDATE_BASE_DELAY_SECONDS = 30
+_LATE_UPDATE_JITTER_SECONDS = 90
+
+
+def _stable_jitter_seconds(seed: str, spread_seconds: int) -> int:
+    """Return deterministic jitter in [0, spread_seconds] for a given seed."""
+    if spread_seconds <= 0:
+        return 0
+    digest = hashlib.blake2s(seed.encode("utf-8"), digest_size=4).digest()
+    value = int.from_bytes(digest, "big")
+    return value % (spread_seconds + 1)
+
+
+async def async_setup(hass: HomeAssistant, config: dict) -> bool:
+    """Set up the Intelligent Heating Pilot component."""
+    hass.data.setdefault(DOMAIN, {})
+
+    # Initialize shared recorder access queue (FIFO) for all IHP devices.
+    # This must be created before any device entry setup to ensure all adapters
+    # share the same queue and recorder access is serialized across instances.
+    from .infrastructure.recorder_queue import get_recorder_queue
+
+    get_recorder_queue(hass)
+
+    # Store hass in http app context for REST API views to access it
+    hass.http.app["hass"] = hass
+
+    # Register HTTP views once at the integration level (not per device)
+    await async_register_http_views(hass)
+
+    return True
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Set up Intelligent Heating Pilot from a config entry.
+
+    REFACTORED: Now uses HADeviceConfigReader to extract configuration
+    and injects DeviceConfig into the Coordinator instead of passing
+    config_entry directly.
+
+    Args:
+        hass: Home Assistant instance
+        entry: Config entry to set up
+
+    Returns:
+        True if setup succeeded
+    """
+    _LOGGER.debug("Setting up IHP config entry: %s", entry.entry_id)
+
+    hass.data.setdefault(DOMAIN, {})
+
+    # ============================================================================
+    # REFACTORING: Create device config reader and extract configuration
+    # ============================================================================
+    # Instead of passing config_entry to the Coordinator, we:
+    # 1. Create HADeviceConfigReader (infrastructure adapter)
+    # 2. Read DeviceConfig from config_entry (data + options)
+    # 3. Inject DeviceConfig into Coordinator (dependency injection)
+
+    from .infrastructure.adapters.device_config_reader import HADeviceConfigReader
+
+    # Create device configuration reader (infrastructure layer)
+    device_config_reader = HADeviceConfigReader(hass, entry)
+
+    # Read complete device configuration (applies "options override data" logic)
+    try:
+        device_config = await device_config_reader.get_device_config(entry.entry_id)
+    except ValueError as err:
+        _LOGGER.error("Failed to load device configuration: %s", err)
+        return False
+
+    _LOGGER.debug(
+        "Loaded device configuration: vtherm=%s, schedulers=%d, ihp_enabled=%s",
+        device_config.vtherm_entity_id,
+        len(device_config.scheduler_entities),
+        device_config.ihp_enabled,
+    )
+
+    # ============================================================================
+    # Create and load coordinator with injected configuration
+    # ============================================================================
+    # NEW: Coordinator ONLY receives device_config (pure DDD)
+    # config_entry is passed later via setup_config_entry_access for options updates
+
+    coordinator = HeatingApplication(hass, device_config)
+    coordinator.setup_config_entry_access(entry)
+    coordinator._options_snapshot = dict(entry.options)
+    await coordinator.async_load()
+
+    # Store coordinator
+    hass.data[DOMAIN][entry.entry_id] = coordinator
+
+    # Setup event listeners
+    coordinator.setup_listeners()
+
+    def _schedule_startup_work() -> None:
+        """Schedule startup work with deterministic per-entry staggering.
+
+        This avoids synchronized bursts when many IHP entries start together.
+        """
+        extraction_delay = _STARTUP_EXTRACTION_BASE_DELAY_SECONDS + _stable_jitter_seconds(
+            f"{entry.entry_id}:extract", _STARTUP_EXTRACTION_JITTER_SECONDS
+        )
+        update_delay = _STARTUP_UPDATE_BASE_DELAY_SECONDS + _stable_jitter_seconds(
+            f"{entry.entry_id}:update", _STARTUP_UPDATE_JITTER_SECONDS
+        )
+
+        @callback
+        def _run_extraction(_now):
+            hass.async_create_task(coordinator.async_initialize_cycle_extraction())
+
+        @callback
+        def _run_update(_now):
+            hass.async_create_task(coordinator.async_update())
+
+        entry.async_on_unload(
+            async_track_point_in_time(
+                hass,
+                _run_update,
+                dt_util.now() + dt_util.dt.timedelta(seconds=update_delay),
+            )
+        )
+        entry.async_on_unload(
+            async_track_point_in_time(
+                hass,
+                _run_extraction,
+                dt_util.now() + dt_util.dt.timedelta(seconds=extraction_delay),
+            )
+        )
+
+        _LOGGER.info(
+            "[%s] Startup workload staggered: update in %ss, extraction in %ss",
+            entry.entry_id,
+            update_delay,
+            extraction_delay,
+        )
+
+    # Wait for HA to be fully started before initializing cycle extraction and first update
+    # This ensures all entities (especially VTherm and scheduler entities) are available
+    @callback
+    def _ha_started(_event):
+        _LOGGER.info(
+            "[%s] HA started, initializing cycle extraction and triggering updates", entry.entry_id
+        )
+        _schedule_startup_work()
+
+    # Schedule initial tasks asynchronously to avoid blocking config flow
+    # This prevents HA watchdog restart during device creation with scheduler
+    if hass.is_running:
+        _LOGGER.debug("[%s] HA already running, scheduling staggered startup work", entry.entry_id)
+        _schedule_startup_work()
+    else:
+        _LOGGER.debug("[%s] Waiting for HA start event before initialization", entry.entry_id)
+        hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STARTED, _ha_started)
+
+    # Small delayed update for late attribute population
+    @callback
+    def _delayed_update(_now):
+        _LOGGER.debug("[%s] Delayed update", entry.entry_id)
+        hass.async_create_task(coordinator.async_update())
+
+    late_update_delay = _LATE_UPDATE_BASE_DELAY_SECONDS + _stable_jitter_seconds(
+        f"{entry.entry_id}:late_update", _LATE_UPDATE_JITTER_SECONDS
+    )
+
+    entry.async_on_unload(
+        async_track_point_in_time(
+            hass,
+            _delayed_update,
+            dt_util.now() + dt_util.dt.timedelta(seconds=late_update_delay),
+        )
+    )
+
+    # Register options update listener
+    entry.async_on_unload(entry.add_update_listener(async_update_options))
+
+    # Register services (once per integration, not per device)
+    def _resolve_coordinator(entity_id: str) -> HeatingApplication:
+        """Resolve an IHP coordinator from an entity ID.
+
+        Looks up the entity in the entity registry to find its config entry,
+        then returns the corresponding HeatingApplication coordinator.
+
+        Raises:
+            ServiceValidationError: If the entity or its coordinator cannot be found,
+                so callers receive immediate actionable feedback in the HA UI.
+        """
+        entity_reg = er.async_get(hass)
+        entity_entry = entity_reg.async_get(entity_id)
+        if not entity_entry:
+            raise ServiceValidationError(
+                f"Entity '{entity_id}' was not found in the Home Assistant entity registry. "
+                "Please provide a valid IHP sensor entity ID, for example: "
+                "sensor.intelligent_heating_pilot_<device_name>_anticipated_start_time."
+            )
+        coord = hass.data[DOMAIN].get(entity_entry.config_entry_id)
+        if not coord or not isinstance(coord, HeatingApplication):
+            raise ServiceValidationError(
+                f"No IHP device found for entity '{entity_id}' "
+                f"(config_entry_id={entity_entry.config_entry_id}). "
+                "Make sure the IHP integration is properly configured."
+            )
+        return coord
+
+    if not hass.services.has_service(DOMAIN, "reset_learning"):
+
+        async def handle_reset_learning(call: ServiceCall) -> None:
+            """Handle reset_learning service.
+
+            Resolves the target IHP device from the entity_id provided in the service
+            call, then delegates to that device's orchestrator.  This allows callers
+            to choose which device to reset when multiple IHP config entries exist.
+            """
+            _LOGGER.debug("Entering handle_reset_learning")
+
+            coord = _resolve_coordinator(call.data["entity_id"])
+            await coord._orchestrator.reset_all_learning_data(
+                device_id=coord.get_device_id()
+            )
+            _LOGGER.info(
+                "reset_learning: learning data cleared for device %s", coord.get_device_id()
+            )
+
+        reset_learning_schema = vol.Schema(
+            {
+                vol.Required("entity_id"): cv.entity_id,
+            }
+        )
+
+        hass.services.async_register(
+            DOMAIN,
+            "reset_learning",
+            handle_reset_learning,
+            schema=reset_learning_schema,
+        )
+
+    if not hass.services.has_service(DOMAIN, SERVICE_CALCULATE_ANTICIPATED_START_TIME):
+
+        async def handle_calculate_anticipated_start_time(call: ServiceCall):
+            """Handle calculate_anticipated_start_time service.
+
+            This service calculates the anticipated start time for a given IHP device
+            to reach a target temperature at a specified time.
+
+            Delegates to orchestrator's calculate_anticipation_only() - no business logic here.
+            """
+            _LOGGER.debug("Entering handle_calculate_anticipated_start_time")
+
+            # Extract service call parameters
+            entity_id = call.data["entity_id"]
+            target_time = call.data["target_time"]
+            target_temp = call.data.get("target_temp")
+
+            # Ensure target_time has timezone
+            if target_time.tzinfo is None:
+                target_time = dt_util.as_local(target_time)
+
+            # Resolve the coordinator for this device
+            device_coordinator = _resolve_coordinator(entity_id)
+
+            # Get target_temp from service call or VTherm
+            if target_temp is None:
+                # Try to get target temp from VTherm using public accessor
+                vtherm_entity_id = device_coordinator.get_vtherm_entity()
+                if vtherm_entity_id:
+                    vtherm_state = hass.states.get(vtherm_entity_id)
+                    if vtherm_state:
+                        target_temp = vtherm_state.attributes.get("temperature")
+            if target_temp is not None:
+                target_temp = float(target_temp)
+
+            # Delegate to orchestrator (pure routing - no business logic)
+            anticipation_data = await device_coordinator._orchestrator.calculate_anticipation_only(
+                target_time=target_time,
+                target_temp=target_temp,
+            )
+
+            # Extract fields from anticipation_data (which is already structured)
+            anticipated_start_time = anticipation_data.get("anticipated_start_time")
+            response_target_time = anticipation_data.get("next_schedule_time") or target_time
+            response_target_temp = anticipation_data.get("next_target_temperature")
+            if response_target_temp is None:
+                response_target_temp = target_temp
+            if anticipated_start_time is None:
+                _LOGGER.warning("Could not calculate anticipated start time (insufficient data)")
+                # Return structure with None values
+                return {
+                    "anticipated_start_time": None,
+                    "target_time": response_target_time.isoformat(),
+                    "target_temp": response_target_temp,
+                    "current_temp": anticipation_data.get("current_temp"),
+                    "estimated_duration_minutes": None,
+                    "learned_heating_slope": anticipation_data.get("learned_heating_slope"),
+                    "confidence_level": None,
+                }
+
+            _LOGGER.info(
+                "Service calculate_anticipated_start_time: "
+                "anticipated_start=%s, target_time=%s, target_temp=%.1f°C, "
+                "current_temp=%.1f°C, LHS=%.2f°C/h, confidence=%.2f",
+                anticipated_start_time.isoformat(),
+                response_target_time.isoformat(),
+                response_target_temp or 0.0,
+                anticipation_data.get("current_temp") or 0.0,
+                anticipation_data.get("learned_heating_slope") or 0.0,
+                anticipation_data.get("confidence_level") or 0.0,
+            )
+
+            # Return the result as service response data
+            return {
+                "anticipated_start_time": anticipated_start_time.isoformat(),
+                "target_time": response_target_time.isoformat(),
+                "target_temp": response_target_temp,
+                "current_temp": anticipation_data.get("current_temp"),
+                "estimated_duration_minutes": anticipation_data.get("estimated_duration_minutes"),
+                "learned_heating_slope": anticipation_data.get("learned_heating_slope"),
+                "confidence_level": anticipation_data.get("confidence_level"),
+            }
+
+        # Define service schema
+        calculate_anticipated_start_time_schema = vol.Schema(
+            {
+                vol.Required("entity_id"): cv.entity_id,
+                vol.Required("target_time"): cv.datetime,
+                vol.Optional("target_temp"): vol.Coerce(float),
+            }
+        )
+
+        hass.services.async_register(
+            DOMAIN,
+            SERVICE_CALCULATE_ANTICIPATED_START_TIME,
+            handle_calculate_anticipated_start_time,
+            schema=calculate_anticipated_start_time_schema,
+            supports_response=SupportsResponse.ONLY,
+        )
+
+    # Forward setup to platforms
+    await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)
+
+    return True
+
+
+async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Unload a config entry."""
+    coordinator = hass.data[DOMAIN].get(entry.entry_id)
+    if coordinator:
+        await coordinator.async_cleanup()
+
+    if unload_ok := await hass.config_entries.async_unload_platforms(entry, PLATFORMS):
+        hass.data[DOMAIN].pop(entry.entry_id)
+
+    return bool(unload_ok)
+
+
+async def async_update_options(hass: HomeAssistant, entry: ConfigEntry) -> None:
+    """Update options and reload integration."""
+    from .const import CONF_DATA_RETENTION_DAYS
+
+    coordinator: HeatingApplication | None = hass.data[DOMAIN].get(entry.entry_id)
+
+    previous_options = (
+        dict(getattr(coordinator, "_options_snapshot", {}) or {}) if coordinator else {}
+    )
+    previous_no_toggle = {k: v for k, v in previous_options.items() if k != CONF_IHP_ENABLED}
+    current_no_toggle = {k: v for k, v in entry.options.items() if k != CONF_IHP_ENABLED}
+    ihp_enabled = as_bool(entry.options.get(CONF_IHP_ENABLED), default=True)
+
+    # Check if only retention days changed (reconfiguration of cycle refresh)
+    retention_only_changed = (
+        coordinator is not None
+        and previous_no_toggle != current_no_toggle
+        and len(set(previous_no_toggle.keys()) ^ set(current_no_toggle.keys())) == 1
+        and CONF_DATA_RETENTION_DAYS
+        in (set(previous_no_toggle.keys()) ^ set(current_no_toggle.keys()))
+    )
+
+    if retention_only_changed:
+        # Handle retention change without reload
+        new_retention_days = int(entry.options.get(CONF_DATA_RETENTION_DAYS, 10))
+        _LOGGER.info(
+            "[%s] Data retention changed to %d days, updating cycle refresh",
+            entry.entry_id,
+            new_retention_days,
+        )
+        if coordinator:
+            coordinator._options_snapshot = dict(entry.options)
+            coordinator._ihp_enabled = ihp_enabled
+            await coordinator.async_notify_retention_change(new_retention_days)
+        return
+
+    # If only the ihp_enabled flag changed, skip full reload
+    if coordinator and previous_no_toggle == current_no_toggle:
+        _LOGGER.info("[%s] Options updated (ihp_enabled only), skipping reload", entry.entry_id)
+        coordinator._options_snapshot = dict(entry.options)
+        coordinator._ihp_enabled = ihp_enabled
+        await coordinator.async_update()
+        return
+
+    _LOGGER.info("[%s] Options updated, reloading", entry.entry_id)
+    if coordinator:
+        coordinator._options_snapshot = dict(entry.options)
+
+    await hass.config_entries.async_reload(entry.entry_id)
+
+    # Schedule async update after reload (non-blocking)
+    coordinator = hass.data[DOMAIN].get(entry.entry_id)
+    if coordinator:
+        hass.async_create_task(coordinator.async_update())

custom_components/intelligent_heating_pilot/application/__init__.py

@@ -0,0 +1,7 @@
+"""Application layer - use case orchestration."""
+
+from __future__ import annotations
+
+from .orchestrator import HeatingOrchestrator
+
+__all__ = ["HeatingOrchestrator"]