1116 lines
53 KiB
JSON
1116 lines
53 KiB
JSON
{
|
|
"common": {
|
|
"source_entity": "Zdrojová entita",
|
|
"source_device": "Zdrojové zařízení",
|
|
"remarks_smart_switch": "Tento profil poskytuje pouze hodnoty napájení v pohotovostním režimu. \n Pokud máte spotřebič, který zapnutí spotřebovává pevně dané množství energie, můžete zadat tuto hodnotu v dalším kroku v nastavení",
|
|
"remarks_smart_dimmer": "Tento profil poskytuje pouze hodnoty spotřeby energie v pohotovostním režimu. \n V dalším kroku můžete volitelně zadat hodnoty připojeného světla"
|
|
},
|
|
"config": {
|
|
"abort": {
|
|
"already_configured": "Senzor je již nastaven, zadejte unikátní ID",
|
|
"cost_no_global_price": "Zatím není nakonfigurovaná žádná cena energie. Před vytvořením senzoru nákladů nastavte cenu energie v globální konfiguraci Powercalc. Viz [dokumentace]({url})."
|
|
},
|
|
"error": {
|
|
"cost_price_mandatory": "You must supply either an energy price or an energy price sensor",
|
|
"daily_energy_mandatory": "Musíte zadat alespoň jednu z možností „Hodnota“ nebo „Šablona hodnoty“",
|
|
"entity_mandatory": "Pro všechny strategie kromě playbook je nutné vybrat entitu",
|
|
"fixed_mandatory": "Musíte zadat alespoň jednu z následujících možností: Power, šablonu Power nebo States power",
|
|
"fixed_states_power_only": "This entity can only work with 'states_power' not 'power'",
|
|
"group_mandatory": "You must define at least subgroups or power and energy-entities",
|
|
"linear_mandatory": "You must supply at least one of max_power or calibrate",
|
|
"linear_min_higher_as_max": "Maximální spotřeba nebůže být nižší, nežli minimální spotřeba",
|
|
"linear_unsupported_domain": "Entity domain not supported for linear mode. Must be one of: fan, light or mediaplayer. You can use the calibrate option however",
|
|
"lut_unsupported_color_mode": "The LUT profile does not support one of the color modes of your light. See the logs for more info",
|
|
"lut_wrong_domain": "Only light entities can use the LUT mode",
|
|
"playbook_mandatory": "You need to specify at least one playbook",
|
|
"unknown": "Unknown error occured, please see the logs for additional information"
|
|
},
|
|
"flow_title": "{name} ({manufacturer} {model})",
|
|
"step": {
|
|
"assign_groups": {
|
|
"data": {
|
|
"group": "Vybrat skupinu(y)",
|
|
"new_group": "Nová skupina"
|
|
},
|
|
"data_description": {
|
|
"new_group": "Pro vytvoření nové skupiny zadejte název skupiny"
|
|
},
|
|
"title": "Přiřadit do skupiny"
|
|
},
|
|
"availability_entity": {
|
|
"data": {
|
|
"availability_entity": "Availability entity"
|
|
},
|
|
"data_description": {
|
|
"availability_entity": "When this entity is unavailable, the powercalc sensor will be unavailable as well"
|
|
},
|
|
"title": "Availability entity",
|
|
"description": "This profile is per device. Please select the entity which will be used to determine the availability of the powercalc sensor"
|
|
},
|
|
"daily_energy": {
|
|
"data": {
|
|
"create_utility_meters": "Create utility meters",
|
|
"daily_energy_value": "Daily energy value",
|
|
"name": "Název",
|
|
"on_time": "V čase",
|
|
"start_time": "Start time",
|
|
"unit_of_measurement": "Jednotka měření",
|
|
"update_frequency": "Frekvence aktualizace",
|
|
"value": "Hodnota",
|
|
"value_template": "Šablona hodnoty"
|
|
},
|
|
"data_description": {
|
|
"on_time": "Pokud ponecháte prázdné, výchozí hodnota je 1 den. Vždy zapnuto",
|
|
"update_frequency": "čas v sekundách mezi aktualizacemi stavu senzoru"
|
|
},
|
|
"title": "Vytvořit denní fixní senzor"
|
|
},
|
|
"energy_options": {
|
|
"title": "Možnosti energie",
|
|
"data": {
|
|
"energy_integration_method": "Metoda integrace",
|
|
"energy_sensor_unit_prefix": "Předpona jednotky",
|
|
"energy_filter_outlier_enabled": "Filtrovat odlehlé hodnoty",
|
|
"energy_filter_outlier_max_step": "Maximální krok filtru odlehlých hodnot"
|
|
},
|
|
"data_description": {
|
|
"energy_filter_outlier_enabled": "Povolit filtrování odlehlých hodnot v senzoru energie",
|
|
"energy_filter_outlier_max_step": "Maximální očekávaný krok v hodnotách výkonu (ve wattech) pro filtr odlehlých hodnot"
|
|
}
|
|
},
|
|
"group_domain": {
|
|
"data": {
|
|
"name": "Název",
|
|
"create_energy_sensor": "Vytvořit senzor energie",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Vytvořit senzor spotřeby",
|
|
"domain": "Entity domain",
|
|
"exclude_entities": "Vyloučit entity"
|
|
},
|
|
"title": "Create a domain based group sensor"
|
|
},
|
|
"fixed": {
|
|
"data": {
|
|
"fixed_value": "Fixed value"
|
|
},
|
|
"data_description": {
|
|
"fixed_value": "Fixed value in Watts when the entity is ON"
|
|
},
|
|
"description": "Definujte fixní hodnotu příkonu pro vaši entitu. Viz [documentation]({docs_uri}) pro více informací. Případně můžete definovat hodnotu příkonu pro jednotlivé stavy. Například:\n\n`playing: 8.3`\n`paused: 2.25`",
|
|
"title": "Fixed config"
|
|
},
|
|
"global_configuration": {
|
|
"title": "Globální konfigurace",
|
|
"description": "Setup global configuration for Powercalc. For more information see the [documentation]({docs_uri}). Additional options for energy sensors and utility meters can be provided in the next steps.",
|
|
"sections": {
|
|
"power_options": {
|
|
"name": "Senzor výkonu",
|
|
"data": {
|
|
"power_sensor_naming": "Power sensor name pattern",
|
|
"power_sensor_friendly_naming": "Power sensor friendly name pattern",
|
|
"power_sensor_category": "Power sensor category",
|
|
"power_sensor_precision": "Přesnost senzoru výkonu"
|
|
}
|
|
},
|
|
"features": {
|
|
"name": "Vytvořit senzory",
|
|
"data": {
|
|
"create_energy_sensors": "Create energy sensors",
|
|
"create_cost_sensors": "Create cost sensors",
|
|
"create_standby_group": "Create standby group",
|
|
"create_utility_meters": "Vytvořit senzor spotřeby"
|
|
},
|
|
"data_description": {
|
|
"create_energy_sensors": "Whether powercalc needs to create kWh sensors",
|
|
"create_cost_sensors": "Whether powercalc needs to create cost sensors. Requires an energy price to be configured in the next steps",
|
|
"create_standby_group": "Create group which sums all standby power consumption and self-usage of IOT devices",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc."
|
|
}
|
|
},
|
|
"advanced": {
|
|
"name": "Pokročilé",
|
|
"data": {
|
|
"enable_analytics": "Enable anonymous analytics",
|
|
"ignore_unavailable_state": "Ignore unavailable state",
|
|
"include_non_powercalc_sensors": "Zahrnout ne-powercalc senzory",
|
|
"disable_extended_attributes": "Disable extended attributes",
|
|
"disable_library_download": "Disable remote library download"
|
|
},
|
|
"data_description": {
|
|
"enable_analytics": "Allow Powercalc to send anonymous, aggregated usage statistics to help improve the integration",
|
|
"ignore_unavailable_state": "Keep Powercalc sensors available, even when the source entity is unavailable",
|
|
"include_non_powercalc_sensors": "Control whether you want to include non powercalc sensors in groups",
|
|
"disable_extended_attributes": "Disable all extra attributes powercalc adds to the power, energy and group entity states. This will help keep the database size small",
|
|
"disable_library_download": "Disable the Powercalc library download feature"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"global_configuration_cost": {
|
|
"title": "Cost options",
|
|
"description": "Configure the energy price used to calculate cost sensors. Provide either a fixed price or a sensor which provides the current price per kWh. Další informace naleznete v [dokumentaci]({docs_uri})",
|
|
"sections": {
|
|
"cost_pricing": {
|
|
"name": "Pricing",
|
|
"data": {
|
|
"energy_price": "Fixed energy price",
|
|
"energy_price_multiplier": "Energy price multiplier",
|
|
"energy_price_sensor": "Energy price sensor",
|
|
"energy_price_surcharge": "Energy price surcharge"
|
|
},
|
|
"data_description": {
|
|
"energy_price": "A fixed price per kWh in your local currency",
|
|
"energy_price_multiplier": "Multiplier applied after the surcharge. Use this for percentage-based taxes or fees, for example 1.21 for 21%",
|
|
"energy_price_sensor": "A sensor which provides the current energy price per kWh (e.g. from a dynamic tariff integration). Leave the fixed price empty to use this sensor",
|
|
"energy_price_surcharge": "Additional fixed amount per kWh added to the fixed price or price sensor value"
|
|
}
|
|
},
|
|
"cost_naming": {
|
|
"name": "Naming",
|
|
"data": {
|
|
"cost_sensor_friendly_naming": "Cost sensor friendly name pattern",
|
|
"cost_sensor_naming": "Cost sensor name pattern"
|
|
},
|
|
"data_description": {
|
|
"cost_sensor_friendly_naming": "Pattern for the friendly name of the cost sensor. The source name is inserted at the placeholder position",
|
|
"cost_sensor_naming": "Pattern used to build the cost sensor name and entity id. The source name is inserted at the placeholder position"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"global_configuration_cost_apply": {
|
|
"title": "Apply cost sensors",
|
|
"description": "You changed the global cost sensors setting. Do you want to apply this change to all existing powercalc sensors that were created through the GUI?",
|
|
"data": {
|
|
"apply_to_all": "Apply to existing sensors"
|
|
},
|
|
"data_description": {
|
|
"apply_to_all": "Update every existing GUI powercalc sensor to match the new cost sensors setting"
|
|
}
|
|
},
|
|
"global_configuration_discovery": {
|
|
"title": "Možnosti objevování",
|
|
"description": "Powercalc může skenovat váš systém pro zařízení a entity, které mají profily v integrované knihovně. Níže uvedené možnosti vám umožňují toto chování přizpůsobit.",
|
|
"data": {
|
|
"enabled": "Povolit objevování",
|
|
"exclude_device_types": "Vyloučené typy zařízení",
|
|
"exclude_self_usage": "Vyloučit vlastní spotřebu"
|
|
},
|
|
"data_description": {
|
|
"exclude_device_types": "Vyloučit jeden nebo více konkrétních typů zařízení z objevování.",
|
|
"exclude_self_usage": "Vyloučit profily vlastní spotřeby pro chytré spínače."
|
|
}
|
|
},
|
|
"global_configuration_energy": {
|
|
"title": "Energy options",
|
|
"data": {
|
|
"energy_integration_method": "Energy integration method",
|
|
"energy_sensor_category": "Energy sensor category",
|
|
"energy_sensor_friendly_naming": "Energy sensor friendly name pattern",
|
|
"energy_sensor_naming": "Energy sensor name pattern",
|
|
"energy_sensor_precision": "Přesnost senzoru energie",
|
|
"energy_sensor_unit_prefix": "Předpona jednotky senzoru energie"
|
|
}
|
|
},
|
|
"global_configuration_throttling": {
|
|
"title": "Throttling options",
|
|
"description": "Set update intervals for the different sensor types. See [documentation]({docs_uri}) for more info",
|
|
"data": {
|
|
"group_energy_update_interval": "Group energy update interval",
|
|
"group_power_update_interval": "Group power update interval",
|
|
"energy_update_interval": "Energy update interval",
|
|
"power_update_interval": "Power update interval"
|
|
},
|
|
"data_description": {
|
|
"group_energy_update_interval": "Interval at which group energy sensors are updated. In seconds. Set to 0 to disable",
|
|
"group_power_update_interval": "Interval at which group power sensors are updated. In seconds. Set to 0 to disable",
|
|
"energy_update_interval": "Interval at which energy sensors are updated. In seconds. Set to 0 to disable",
|
|
"power_update_interval": "Interval at which energy sensors are force updated. In seconds. Set to 0 to disable"
|
|
}
|
|
},
|
|
"global_configuration_utility_meter": {
|
|
"title": "Utility meter options",
|
|
"data": {
|
|
"utility_meter_net_consumption": "Utility meter net consumption",
|
|
"utility_meter_tariffs": "Utility meter tariffs",
|
|
"utility_meter_types": "Utility meter types"
|
|
}
|
|
},
|
|
"group_custom": {
|
|
"data": {
|
|
"name": "Název"
|
|
},
|
|
"sections": {
|
|
"members": {
|
|
"name": "Členové",
|
|
"data": {
|
|
"group_member_sensors": "Member powercalc sensors",
|
|
"group_member_devices": "Member devices",
|
|
"group_power_entities": "Additional power entities",
|
|
"group_energy_entities": "Additional energy entities",
|
|
"sub_groups": "Podskupiny",
|
|
"area": "Oblast",
|
|
"floor": "Floor"
|
|
},
|
|
"data_description": {
|
|
"group_member_sensors": "Powercalc sensors to include in the group",
|
|
"group_member_devices": "Add power and energy entities from the selected devices to the group",
|
|
"group_power_entities": "Další senzory energie (W) z vaší instalace HA k přidání",
|
|
"group_energy_entities": "Další senzory energie (kWh) z vaší instalace HA k přidání",
|
|
"sub_groups": "All containing sensors from the selected subgroups will be added to this group as well",
|
|
"area": "Přidá všechny energetické senzory z určené oblasti",
|
|
"floor": "Adds all power sensors from the specified floor"
|
|
}
|
|
},
|
|
"options": {
|
|
"name": "Možnosti",
|
|
"data": {
|
|
"device": "Zařízení",
|
|
"hide_members": "Skrýt členy",
|
|
"include_non_powercalc_sensors": "Zahrnout ne-powercalc senzory",
|
|
"force_calculate_group_energy": "Force calculate energy",
|
|
"group_energy_start_at_zero": "Začít na nule",
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_utility_meters": "Create utility meters"
|
|
},
|
|
"data_description": {
|
|
"device": "Add the group entities powercalc creates to an existing device",
|
|
"include_non_powercalc_sensors": "Control whether to include non powercalc sensors when using the area option",
|
|
"force_calculate_group_energy": "By default powercalc sums the energy sensors from the member sensors. Toggle this option to force creating a Riemann Sum sensor",
|
|
"group_energy_start_at_zero": "When enabled, the energy sensor will start at zero when the sensor is created. Otherwise it will sum all the current member energy sensor states",
|
|
"create_energy_sensor": "Whether powercalc needs to create a kWh sensor"
|
|
}
|
|
}
|
|
},
|
|
"title": "Create a group sensor"
|
|
},
|
|
"group_subtract": {
|
|
"data": {
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Create utility meters",
|
|
"entity_id": "Základní entita",
|
|
"name": "Název",
|
|
"subtract_entities": "Odečíst entity"
|
|
},
|
|
"data_description": {
|
|
"entity_id": "Základní entita, od které se bude odečítat výkon",
|
|
"subtract_entities": "Vyberte všechny entity které chcete odečíst od základní entity"
|
|
},
|
|
"title": "Subtract group sensor"
|
|
},
|
|
"group_tracked_untracked": {
|
|
"data": {
|
|
"main_power_sensor": "Senzor síťového napájení",
|
|
"group_tracked_auto": "Automaticky přidané entity",
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Create utility meters"
|
|
},
|
|
"data_description": {
|
|
"main_power_sensor": "Select the power sensor containing your total power usage. When left empty, only an tracked power sensor will be created",
|
|
"group_tracked_auto": "Powercalc will automatically add all power sensors to the tracked group, skipping powercalc groups. Disable this when you'd like to manually define the tracked entities",
|
|
"create_energy_sensor": "Whether powercalc needs to create a kWh sensor",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc."
|
|
},
|
|
"description": "Create a group sensor for all tracked and untracked power",
|
|
"title": "Create a tracked power sensor"
|
|
},
|
|
"group_tracked_untracked_manual": {
|
|
"data": {
|
|
"group_tracked_entities": "Tracked entities"
|
|
},
|
|
"description": "Select all the power sensors which are part of the tracked consumption. It is already automatically populated, but you can manually adjust it",
|
|
"title": "Select power entities"
|
|
},
|
|
"group_tracked_untracked_auto": {
|
|
"data": {
|
|
"exclude_entities": "Exclude entities"
|
|
},
|
|
"description": "Exclude specific entities from the auto tracked group",
|
|
"title": "Auto tracked configuration"
|
|
},
|
|
"library": {
|
|
"data": {
|
|
"confirm_autodisovered_model": "Potvrdit model"
|
|
},
|
|
"data_description": {
|
|
"confirm_autodisovered_model": "Pokud se rozhodnete nepotvrzovat, pak můžete zadat výrobce a model manuálně"
|
|
},
|
|
"description": "{source}\n\nVýrobce \"{manufacturer}\" a model \"{model}\" byl automaticky detekován pro vaše zařízení.{remarks}",
|
|
"title": "Knihovna"
|
|
},
|
|
"library_custom_fields": {
|
|
"title": "Profile configuration",
|
|
"data": {
|
|
"power_factor": "Power Factor"
|
|
},
|
|
"data_description": {
|
|
"power_factor": "Ratio of real power to apparent power. Use 0.6 for computers/electronics, 0.7 for mixed loads, 1.0 for resistive loads like heaters."
|
|
}
|
|
},
|
|
"library_multi_profile": {
|
|
"data": {
|
|
"model": "Select model"
|
|
},
|
|
"description": "Manufacturer \"{manufacturer}\" and model \"{model}\" were automatically detected for your device. There are multiple profiles found for the entity which can potentially be used. Please look up the exact model of your device in [Powercalc library]({library_link}) and select the correct one",
|
|
"title": "Knihovna"
|
|
},
|
|
"linear": {
|
|
"data": {
|
|
"attribute": "Atribut",
|
|
"calibrate": "Kalibrační hodnoty",
|
|
"gamma_curve": "Gama křivka",
|
|
"max_power": "Maximální spotřeba",
|
|
"min_power": "Minimální spotřeba"
|
|
},
|
|
"data_description": {
|
|
"attribute": "Specify the attribute. When left empty will be brightness for lights and percentage for fans",
|
|
"calibrate": "Put a calibration value on each line. Example\n\n1: 20"
|
|
},
|
|
"description": "Define the linear power calculation options. See the [documentation]({docs_uri}) for more information. Use either min/max power or calibration values which allows for more points of control.",
|
|
"title": "Lineární konfigurace"
|
|
},
|
|
"manufacturer": {
|
|
"data": {
|
|
"manufacturer": "Výrobce"
|
|
},
|
|
"description": "Vyberte výrobce zařízení",
|
|
"title": "Nastavení výrobce"
|
|
},
|
|
"model": {
|
|
"data": {
|
|
"model": "ID modelu"
|
|
},
|
|
"description": "Vyberte model zařízení. Viz [list]({supported_models_link}) podporovaných modelů pro více informací",
|
|
"title": "Nastavení modelu"
|
|
},
|
|
"menu_group": {
|
|
"menu_options": {
|
|
"group_custom": "Standard group",
|
|
"group_domain": "Domain based group",
|
|
"group_subtract": "Subtract",
|
|
"group_tracked_untracked": "Tracked/untracked power"
|
|
},
|
|
"title": "Choose the group type",
|
|
"description": "Select the type of group sensor you want to create. Choose domain based group if you want to group all entities of a specific domain, or create a sensor summing all your energy sensors. Choose standard group otherwise."
|
|
},
|
|
"multi_switch": {
|
|
"data": {
|
|
"entities": "Switch entities",
|
|
"power": "Power ON",
|
|
"power_off": "Power OFF"
|
|
},
|
|
"data_description": {
|
|
"entities": "Select all the individual switches that are part of the multi switch",
|
|
"power": "Power for a single switch when turned on",
|
|
"power_off": "Power for a single switch when turned off"
|
|
},
|
|
"description": "Define the Multi switch power calculation options. See the [documentation]({docs_uri}) for more information.",
|
|
"title": "Multi switch config"
|
|
},
|
|
"playbook": {
|
|
"data": {
|
|
"autostart": "Autostart",
|
|
"playbooks": "Playbooks",
|
|
"repeat": "Opakovat",
|
|
"states_trigger": "State trigger"
|
|
},
|
|
"data_description": {
|
|
"autostart": "Indicate to start a certain playbook when HA starts. i.e. 'program1'",
|
|
"repeat": "Toggle when you want to keep repeating the playbook after it completes",
|
|
"states_trigger": "Trigger a playbook based on a state change. Example\n\nplaying: program1"
|
|
},
|
|
"description": "Define the playbook options. See the [documentation]({docs_uri}) for more information.",
|
|
"title": "Playbook config"
|
|
},
|
|
"power_advanced": {
|
|
"data": {
|
|
"calculation_enabled_condition": "Podmínka povolení výpočtu",
|
|
"energy_integration_method": "Metoda energetické integrace",
|
|
"energy_sensor_unit_prefix": "Energy sensor unit prefix",
|
|
"energy_filter_outlier_enabled": "Energy filter outliers",
|
|
"energy_filter_outlier_max_step": "Outlier filter max step",
|
|
"ignore_unavailable_state": "Ignorovat nedostupný stav",
|
|
"multiply_factor": "Koeficient násobení",
|
|
"multiply_factor_standby": "Pohotovostní koeficient násobení",
|
|
"unavailable_power": "Napájení není k dispozici"
|
|
},
|
|
"data_description": {
|
|
"calculation_enabled_condition": "Konfigurovaná strategie výpočtu spotřeby bude aplikováná, pouze pokud se tato šablona vyhodnotí jako true nebo 1. Jinak bude senzor zobrazovat 0",
|
|
"energy_filter_outlier_enabled": "Enable filtering of outlier values in the energy sensor",
|
|
"energy_filter_outlier_max_step": "Maximum expected step in power values (in watts) for the outlier filter",
|
|
"ignore_unavailable_state": "Přepněte toto nastavení, pokud chcete, aby byl senzor energie k dispozici i v případě, že zdrojová entita není dostupná",
|
|
"multiply_factor": "Multiplies the calculated power by this ratio. Can be useful for light groups",
|
|
"multiply_factor_standby": "Použít multiplikační faktor na pohotovostní režim",
|
|
"unavailable_power": "Power in W to record when the source entity has an unavailable state"
|
|
},
|
|
"description": "Níže uvedené možnosti jsou pro pokročilou konfiguraci powercalc. Většina uživatelů je nebude používat, takže je můžete přeskočit",
|
|
"title": "Pokročilá nastavení"
|
|
},
|
|
"real_power": {
|
|
"data": {
|
|
"create_utility_meters": "Create utility meters",
|
|
"entity_id": "Power sensor id",
|
|
"name": "Název",
|
|
"device": "Zařízení"
|
|
},
|
|
"data_description": {
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc.",
|
|
"name": "Base name for the energy and utility meter. Full entity name will be set accordingly to energy_sensor_naming setting",
|
|
"device": "Add the created energy sensor to an specific device"
|
|
},
|
|
"description": "Currently specific settings can only be configured globally",
|
|
"title": "Create an energy sensor for an existing power sensor"
|
|
},
|
|
"cost": {
|
|
"data": {
|
|
"energy_sensor_id": "Energetický senzor",
|
|
"name": "Název"
|
|
},
|
|
"data_description": {
|
|
"energy_sensor_id": "Existující energetický senzor (kWh), pro který se má vypočítat cena. Může to být senzor z libovolné integrace, nejen z Powercalc",
|
|
"name": "Základní název senzoru nákladů. Plný název entity se nastaví podle nastavení cost_sensor_naming"
|
|
},
|
|
"description": "Vytvořit senzor nákladů pro existující energetický senzor. Cena energie se bere z globální konfigurace Powercalc.",
|
|
"title": "Vytvořit senzor nákladů"
|
|
},
|
|
"sub_profile": {
|
|
"data": {
|
|
"sub_profile": "Sub profile"
|
|
},
|
|
"description": "This model has multiple sub profiles. Select one that suites your device\n\n\"{entity_id}\"{remarks}",
|
|
"title": "Sub profile config"
|
|
},
|
|
"sub_profile_per_device": {
|
|
"data": {
|
|
"sub_profile": "Sub profile"
|
|
},
|
|
"description": "This device has a model with multiple sub profiles. {remarks}",
|
|
"title": "Sub profile config"
|
|
},
|
|
"smart_switch": {
|
|
"data": {
|
|
"power": "Power",
|
|
"self_usage_included": "Self usage included"
|
|
},
|
|
"data_description": {
|
|
"power": "A fixed power value in Watts for the connected appliance",
|
|
"self_usage_included": "Whether the power value includes the power consumed by the smart switch itself. When you omit it Powercalc will add the self usage of the smart switch to the power value, which is {self_usage_power}W"
|
|
},
|
|
"description": "Define the power consumption of the connected appliance. When it doesn't use a fixed amount of power you can skip this step. Powercalc will setup a power sensor for the self usage of the smart switch itself",
|
|
"title": "Smart switch config"
|
|
},
|
|
"user": {
|
|
"data": {
|
|
"sensor_type": "Typ senzoru"
|
|
},
|
|
"menu_options": {
|
|
"cost": "Senzor nákladů (z existujícího energetického senzoru)",
|
|
"daily_energy": "Denní energie",
|
|
"group": "Skupina",
|
|
"global_configuration": "Global configuration",
|
|
"menu_group": "Group",
|
|
"menu_library": "Virtual power (library)",
|
|
"real_power": "Energy from real power sensor",
|
|
"virtual_power": "Virtual power (manual)"
|
|
},
|
|
"title": "Zvolte typ senzoru"
|
|
},
|
|
"utility_meter_options": {
|
|
"title": "Utility meter options",
|
|
"description": "Define the settings for utility meter creation here",
|
|
"data": {
|
|
"utility_meter_net_consumption": "Net consumption",
|
|
"utility_meter_types": "Cycles",
|
|
"utility_meter_tariffs": "Tariffs"
|
|
},
|
|
"data_description": {
|
|
"utility_meter_net_consumption": "Enable this if you would like to treat the source as a net meter. This will allow your counter to go both positive and negative.",
|
|
"utility_meter_types": "Create utility meters for specified cycles",
|
|
"utility_meter_tariffs": "A list of supported tariffs, leave empty if only a single tariff is needed."
|
|
}
|
|
},
|
|
"virtual_power": {
|
|
"data": {
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Create utility meters",
|
|
"entity_id": "Source entity",
|
|
"mode": "Výpočetní strategie",
|
|
"name": "Název",
|
|
"standby_power": "Standby power"
|
|
},
|
|
"data_description": {
|
|
"create_energy_sensor": "Whether powercalc needs to create a kWh sensor",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc.",
|
|
"entity_id": "entity the virtual power is based on, the power sensor will listen to state changes of this entity to be updated",
|
|
"name": "Leaving blank will take the name from the source entity",
|
|
"standby_power": "Define the amount of power the device is consuming when in an OFF state"
|
|
},
|
|
"description": "See the readme for more information about the possible strategies and configuration options",
|
|
"title": "Create a virtual power sensor"
|
|
},
|
|
"wled": {
|
|
"data": {
|
|
"power_factor": "Power factor",
|
|
"voltage": "Napětí"
|
|
},
|
|
"description": "Make sure to enable brightness limiter in WLED software. Also see {docs_uri}",
|
|
"title": "Konfigurace WLED"
|
|
}
|
|
}
|
|
},
|
|
"issues": {
|
|
"deprecated_platform_yaml": {
|
|
"description": "Configuring sensors using `sensor->platform` has been deprecated. You need to change your configuration to `powercalc->sensors`. Click on 'Learn more' for further instructions.",
|
|
"title": "Nastavení Powercalc YAML bylo přesunuto"
|
|
},
|
|
"legacy_config": {
|
|
"title": "Konfigurace YAML pro objevování se změnila",
|
|
"description": "Vaše konfigurace YAML pro {type} musí být aktualizována na novou strukturu. Klikněte na 'Další informace' pro více informací."
|
|
},
|
|
"sub_profile": {
|
|
"fix_flow": {
|
|
"step": {
|
|
"sub_profile": {
|
|
"description": "This device has a model with multiple sub profiles. Select one that corresponds to the following entity of this device:\n\n\"{entity_id}\"\n\nManufacturer: {manufacturer}\nModel: {model}{remarks}",
|
|
"title": "Select correct sub profile",
|
|
"data": {
|
|
"sub_profile": "Sub profile"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"title": "Sub profile selection required for {entry}"
|
|
}
|
|
},
|
|
"options": {
|
|
"abort": {
|
|
"model_not_support": "Model not supported"
|
|
},
|
|
"error": {
|
|
"cost_price_mandatory": "You must supply either an energy price or an energy price sensor",
|
|
"fixed_mandatory": "You must supply at least one of Power, Power template or States power",
|
|
"fixed_states_power_only": "This entity can only work with 'states_power' not 'power'",
|
|
"group_mandatory": "You must define at least subgroups or power and energy-entities",
|
|
"linear_mandatory": "You must supply at least one of max_power or calibrate",
|
|
"linear_min_higher_as_max": "Maximální spotřeba nebůže být nižší, nežli minimální spotřeba",
|
|
"linear_unsupported_domain": "Entity domain not supported for linear mode. Must be one of: fan, light or mediaplayer. You can use the calibrate option however",
|
|
"unknown": "Došlo k neznámé chybě. Více informací najdete v logu"
|
|
},
|
|
"step": {
|
|
"advanced_options": {
|
|
"title": "Advanced options",
|
|
"data": {
|
|
"calculation_enabled_condition": "Podmínka povolení výpočtu",
|
|
"energy_integration_method": "Energy integration method",
|
|
"ignore_unavailable_state": "Ignore unavailable state",
|
|
"multiply_factor": "Koeficient násobení",
|
|
"multiply_factor_standby": "Multiply factor standby",
|
|
"unavailable_power": "Unavailable power"
|
|
},
|
|
"data_description": {
|
|
"calculation_enabled_condition": "The configured power calculation strategy will only be executed when this template evaluates to true or 1, otherwise the power sensor will display 0",
|
|
"ignore_unavailable_state": "Toggle this setting when you want the power sensor to stay available even if the source entity is unavailable",
|
|
"multiply_factor": "Multiplies the calculated power by this ratio. Can be useful for light groups",
|
|
"multiply_factor_standby": "Whether to also apply multiplication factor to standby power",
|
|
"unavailable_power": "Power in W to record when the source entity has an unavailable state"
|
|
}
|
|
},
|
|
"basic_options": {
|
|
"title": "Basic options",
|
|
"data": {
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Create utility meters",
|
|
"entity_id": "Source entity",
|
|
"name": "Name",
|
|
"standby_power": "Standby power"
|
|
},
|
|
"data_description": {
|
|
"create_energy_sensor": "Whether powercalc needs to create a kWh sensor",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc.",
|
|
"entity_id": "entity the virtual power is based on, the power sensor will listen to state changes of this entity to be updated",
|
|
"name": "Leaving blank will take the name from the source entity",
|
|
"standby_power": "Define the amount of power the device is consuming when in an OFF state"
|
|
}
|
|
},
|
|
"daily_energy": {
|
|
"title": "Daily energy options",
|
|
"data": {
|
|
"daily_energy_value": "Daily energy value",
|
|
"name": "Name",
|
|
"on_time": "On time",
|
|
"start_time": "Start time",
|
|
"unit_of_measurement": "Jednotka měření",
|
|
"update_frequency": "Frekvence aktualizace",
|
|
"value": "Hodnota",
|
|
"value_template": "Šablona hodnoty"
|
|
},
|
|
"data_description": {
|
|
"on_time": "When left empty defaults to 1 day. always on",
|
|
"update_frequency": "time in seconds between state updates of the sensor"
|
|
}
|
|
},
|
|
"energy_options": {
|
|
"title": "Energy options",
|
|
"data": {
|
|
"energy_integration_method": "Integration method",
|
|
"energy_sensor_unit_prefix": "Unit prefix",
|
|
"energy_filter_outlier_enabled": "Filter outliers",
|
|
"energy_filter_outlier_max_step": "Outlier filter max step"
|
|
},
|
|
"data_description": {
|
|
"energy_filter_outlier_enabled": "Enable filtering of outlier values in the energy sensor",
|
|
"energy_filter_outlier_max_step": "Maximum expected step in power values (in watts) for the outlier filter"
|
|
}
|
|
},
|
|
"fixed": {
|
|
"title": "Fixed options",
|
|
"data": {
|
|
"fixed_value": "Fixed value",
|
|
"self_usage_included": "Self usage included"
|
|
},
|
|
"data_description": {
|
|
"self_usage_included": "Whether the power value includes the power consumed by the smart switch itself."
|
|
}
|
|
},
|
|
"global_configuration": {
|
|
"title": "Basic options",
|
|
"sections": {
|
|
"power_options": {
|
|
"name": "Senzor výkonu",
|
|
"data": {
|
|
"power_sensor_naming": "Power sensor name pattern",
|
|
"power_sensor_friendly_naming": "Power sensor friendly name pattern",
|
|
"power_sensor_category": "Power sensor category",
|
|
"power_sensor_precision": "Přesnost senzoru výkonu"
|
|
}
|
|
},
|
|
"features": {
|
|
"name": "Vytvořit senzory",
|
|
"data": {
|
|
"create_energy_sensors": "Create energy sensors",
|
|
"create_cost_sensors": "Create cost sensors",
|
|
"create_standby_group": "Create standby group",
|
|
"create_utility_meters": "Create utility meters"
|
|
},
|
|
"data_description": {
|
|
"create_energy_sensors": "Whether powercalc needs to create kWh sensors",
|
|
"create_cost_sensors": "Whether powercalc needs to create cost sensors. Requires an energy price to be configured in the next steps",
|
|
"create_standby_group": "Create group which sums all standby power consumption and self-usage of IOT devices",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc."
|
|
}
|
|
},
|
|
"advanced": {
|
|
"name": "Pokročilé",
|
|
"data": {
|
|
"enable_analytics": "Enable anonymous analytics",
|
|
"ignore_unavailable_state": "Ignore unavailable state",
|
|
"include_non_powercalc_sensors": "Include non powercalc sensors",
|
|
"disable_extended_attributes": "Disable extended attributes",
|
|
"disable_library_download": "Disable remote library download"
|
|
},
|
|
"data_description": {
|
|
"enable_analytics": "Allow Powercalc to send anonymous, aggregated usage statistics to help improve the integration",
|
|
"ignore_unavailable_state": "Keep Powercalc sensors available, even when the source entity is unavailable",
|
|
"include_non_powercalc_sensors": "Control whether you want to include non powercalc sensors in groups",
|
|
"disable_extended_attributes": "Disable all extra attributes powercalc adds to the power, energy and group entity states. This will help keep the database size small",
|
|
"disable_library_download": "Disable the Powercalc library download feature"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"global_configuration_cost": {
|
|
"title": "Cost options",
|
|
"description": "Configure the energy price used to calculate cost sensors. Provide either a fixed price or a sensor which provides the current price per kWh. Další informace naleznete v [dokumentaci]({docs_uri})",
|
|
"sections": {
|
|
"cost_pricing": {
|
|
"name": "Pricing",
|
|
"data": {
|
|
"energy_price": "Fixed energy price",
|
|
"energy_price_multiplier": "Energy price multiplier",
|
|
"energy_price_sensor": "Energy price sensor",
|
|
"energy_price_surcharge": "Energy price surcharge"
|
|
},
|
|
"data_description": {
|
|
"energy_price": "A fixed price per kWh in your local currency",
|
|
"energy_price_multiplier": "Multiplier applied after the surcharge. Use this for percentage-based taxes or fees, for example 1.21 for 21%",
|
|
"energy_price_sensor": "A sensor which provides the current energy price per kWh (e.g. from a dynamic tariff integration). Leave the fixed price empty to use this sensor",
|
|
"energy_price_surcharge": "Additional fixed amount per kWh added to the fixed price or price sensor value"
|
|
}
|
|
},
|
|
"cost_naming": {
|
|
"name": "Naming",
|
|
"data": {
|
|
"cost_sensor_friendly_naming": "Cost sensor friendly name pattern",
|
|
"cost_sensor_naming": "Cost sensor name pattern"
|
|
},
|
|
"data_description": {
|
|
"cost_sensor_friendly_naming": "Pattern for the friendly name of the cost sensor. The source name is inserted at the placeholder position",
|
|
"cost_sensor_naming": "Pattern used to build the cost sensor name and entity id. The source name is inserted at the placeholder position"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"global_configuration_cost_apply": {
|
|
"title": "Apply cost sensors",
|
|
"description": "You changed the global cost sensors setting. Do you want to apply this change to all existing powercalc sensors that were created through the GUI?",
|
|
"data": {
|
|
"apply_to_all": "Apply to existing sensors"
|
|
},
|
|
"data_description": {
|
|
"apply_to_all": "Update every existing GUI powercalc sensor to match the new cost sensors setting"
|
|
}
|
|
},
|
|
"global_configuration_discovery": {
|
|
"title": "Možnosti objevování",
|
|
"description": "Spravujte nastavení objevování. Viz [dokumentace]({docs_uri}) pro více informací",
|
|
"data": {
|
|
"enabled": "Povolit objevování",
|
|
"exclude_device_types": "Vyloučené typy zařízení",
|
|
"exclude_self_usage": "Vyloučit vlastní spotřebu"
|
|
},
|
|
"data_description": {
|
|
"exclude_device_types": "Vyloučit jeden nebo více konkrétních typů zařízení z objevování.",
|
|
"exclude_self_usage": "Vyloučit profily vlastní spotřeby pro chytré spínače."
|
|
}
|
|
},
|
|
"global_configuration_energy": {
|
|
"title": "Energy options",
|
|
"description": "Define the default settings for energy sensors here. See [documentation]({docs_uri}) for more information",
|
|
"data": {
|
|
"energy_integration_method": "Energy integration method",
|
|
"energy_sensor_category": "Energy sensor category",
|
|
"energy_sensor_friendly_naming": "Energy sensor friendly name pattern",
|
|
"energy_sensor_naming": "Energy sensor name pattern",
|
|
"energy_sensor_precision": "Energy sensor precision",
|
|
"energy_sensor_unit_prefix": "Energy sensor unit prefix"
|
|
}
|
|
},
|
|
"global_configuration_throttling": {
|
|
"title": "Throttling options",
|
|
"description": "Set update intervals for the different sensor types. See [documentation]({docs_uri}) for more info",
|
|
"data": {
|
|
"group_energy_update_interval": "Group energy update interval",
|
|
"group_power_update_interval": "Group power update interval",
|
|
"energy_update_interval": "Energy update interval",
|
|
"power_update_interval": "Power update interval"
|
|
},
|
|
"data_description": {
|
|
"group_energy_update_interval": "Interval at which group energy sensors are updated. In seconds. Set to 0 to disable",
|
|
"group_power_update_interval": "Interval at which group power sensors are updated. In seconds. Set to 0 to disable",
|
|
"energy_update_interval": "Interval at which energy sensors are updated. In seconds. Set to 0 to disable",
|
|
"power_update_interval": "Interval at which power sensors are force updated. In seconds. Set to 0 to disable"
|
|
}
|
|
},
|
|
"global_configuration_utility_meter": {
|
|
"title": "Utility meter options",
|
|
"description": "Define the default settings for utility meters here. See [documentation]({docs_uri}) for more information",
|
|
"data": {
|
|
"utility_meter_net_consumption": "Utility meter net consumption",
|
|
"utility_meter_tariffs": "Utility meter tariffs",
|
|
"utility_meter_types": "Utility meter types"
|
|
}
|
|
},
|
|
"group_custom": {
|
|
"title": "Group options",
|
|
"sections": {
|
|
"members": {
|
|
"name": "Členové",
|
|
"data": {
|
|
"group_member_sensors": "Member powercalc sensors",
|
|
"group_member_devices": "Member devices",
|
|
"group_power_entities": "Additional power entities",
|
|
"group_energy_entities": "Additional energy entities",
|
|
"sub_groups": "Podskupiny",
|
|
"area": "Oblast",
|
|
"floor": "Floor"
|
|
},
|
|
"data_description": {
|
|
"group_member_sensors": "Powercalc sensors to include in the group",
|
|
"group_member_devices": "Add power and energy entities from the selected devices to the group",
|
|
"group_power_entities": "Additional power sensors (W) from your HA installation to include",
|
|
"group_energy_entities": "Additional energy sensors (kWh) from your HA installation to include",
|
|
"sub_groups": "All containing sensors from the selected subgroups will be added to this group as well",
|
|
"area": "Přidá všechny powercalc senzory z určené oblasti",
|
|
"floor": "Adds all power sensors from the specified floor"
|
|
}
|
|
},
|
|
"options": {
|
|
"name": "Možnosti",
|
|
"data": {
|
|
"device": "Zařízení",
|
|
"hide_members": "Hide members",
|
|
"include_non_powercalc_sensors": "Include non powercalc sensors",
|
|
"force_calculate_group_energy": "Force calculate energy"
|
|
},
|
|
"data_description": {
|
|
"device": "Add the group entities powercalc creates to an existing device",
|
|
"include_non_powercalc_sensors": "Control whether to include non powercalc sensors when using the area option",
|
|
"force_calculate_group_energy": "By default powercalc sums the energy sensors from the member sensors. Toggle this option to force creating a Riemann Sum sensor"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"group_subtract": {
|
|
"data": {
|
|
"entity_id": "Base entity",
|
|
"subtract_entities": "Subtract entities"
|
|
},
|
|
"data_description": {
|
|
"entity_id": "The base entity to subtract the power from",
|
|
"subtract_entities": "Select all the entities you want to subtract from the base entity"
|
|
},
|
|
"title": "Group options"
|
|
},
|
|
"group_tracked_untracked": {
|
|
"data": {
|
|
"main_power_sensor": "Mains power sensor",
|
|
"group_tracked_auto": "Entities auto added",
|
|
"create_energy_sensor": "Create energy sensor",
|
|
"create_cost_sensor": "Create cost sensor",
|
|
"create_utility_meters": "Create utility meters"
|
|
},
|
|
"data_description": {
|
|
"main_power_sensor": "Select the power sensor containing your total power usage. When left empty, only an tracked power sensor will be created",
|
|
"group_tracked_auto": "Powercalc will automatically add all power sensors to the tracked group, skipping powercalc groups. Disable this when you'd like to manually define the tracked entities",
|
|
"create_energy_sensor": "Whether powercalc needs to create a kWh sensor",
|
|
"create_utility_meters": "Let powercalc create utility meters, which cycle daily, hourly etc."
|
|
},
|
|
"title": "Možnosti sledované/nesledované skupiny"
|
|
},
|
|
"group_tracked_untracked_manual": {
|
|
"data": {
|
|
"group_tracked_entities": "Tracked entities"
|
|
},
|
|
"title": "Select power entities"
|
|
},
|
|
"init": {
|
|
"menu_options": {
|
|
"advanced_options": "Advanced options",
|
|
"basic_options": "Basic options",
|
|
"cost": "Možnosti nákladů",
|
|
"daily_energy": "Daily energy options",
|
|
"energy_options": "Energy options",
|
|
"fixed": "Fixed options",
|
|
"group_custom": "Group options",
|
|
"group_subtract": "Group options",
|
|
"group_tracked_untracked": "Group options",
|
|
"group_tracked_untracked_manual": "Tracked entities",
|
|
"library_options": "Library options",
|
|
"linear": "Linear options",
|
|
"playbook": "Playbook options",
|
|
"multi_switch": "Multi switch options",
|
|
"real_power": "Real power options",
|
|
"utility_meter_options": "Utility meter options",
|
|
"wled": "WLED options"
|
|
}
|
|
},
|
|
"library_options": {
|
|
"title": "Library options",
|
|
"description": "Currently the following library profile is selected: \n manufacturer: {manufacturer}\n model: {model}\n\nIf you want to change the profile, click next."
|
|
},
|
|
"linear": {
|
|
"title": "Linear options",
|
|
"data": {
|
|
"attribute": "Atribut",
|
|
"calibrate": "Kalibrační hodnoty",
|
|
"gamma_curve": "Gamma curve",
|
|
"max_power": "Maximální spotřeba",
|
|
"min_power": "Minimální spotřeba"
|
|
},
|
|
"data_description": {
|
|
"attribute": "Specify the attribute. When left empty will be brightness for lights and percentage for fans",
|
|
"calibrate": "Kalibrační hodnoty uveďte na samostatné řádky. Příklad\n\n1: 20"
|
|
}
|
|
},
|
|
"multi_switch": {
|
|
"title": "Multi switch options",
|
|
"data": {
|
|
"entities": "Switch entities",
|
|
"power": "Power ON",
|
|
"power_off": "Power OFF"
|
|
},
|
|
"data_description": {
|
|
"entities": "Select all the individual switches that are part of the multi switch",
|
|
"power": "Power for a single switch when turned on",
|
|
"power_off": "Power for a single switch when turned off"
|
|
}
|
|
},
|
|
"playbook": {
|
|
"title": "Playbook options",
|
|
"data": {
|
|
"autostart": "Autostart",
|
|
"playbooks": "Playbooks",
|
|
"repeat": "Opakovat",
|
|
"states_trigger": "State trigger"
|
|
},
|
|
"data_description": {
|
|
"autostart": "Indicate to start a certain playbook when HA starts. i.e. 'program1'",
|
|
"repeat": "Toggle when you want to keep repeating the playbook after it completes",
|
|
"states_trigger": "Trigger a playbook based on a state change. Example\n\nplaying: program1"
|
|
}
|
|
},
|
|
"real_power": {
|
|
"title": "Real power options",
|
|
"data": {
|
|
"device": "Zařízení"
|
|
},
|
|
"data_description": {
|
|
"device": "Add the created energy sensor to an specific device"
|
|
}
|
|
},
|
|
"cost": {
|
|
"title": "Možnosti nákladů",
|
|
"data": {
|
|
"energy_sensor_id": "Energetický senzor"
|
|
},
|
|
"data_description": {
|
|
"energy_sensor_id": "Existující energetický senzor (kWh), pro který se má vypočítat cena"
|
|
}
|
|
},
|
|
"utility_meter_options": {
|
|
"title": "Utility meter options",
|
|
"data": {
|
|
"utility_meter_net_consumption": "Net consumption",
|
|
"utility_meter_types": "Cycles",
|
|
"utility_meter_tariffs": "Utility meter tariffs"
|
|
},
|
|
"data_description": {
|
|
"utility_meter_net_consumption": "Enable this if you would like to treat the source as a net meter. This will allow your counter to go both positive and negative.",
|
|
"utility_meter_types": "Create utility meters for specified cycles",
|
|
"utility_meter_tariffs": "A list of supported tariffs, leave empty if only a single tariff is needed."
|
|
}
|
|
},
|
|
"wled": {
|
|
"title": "WLED options",
|
|
"data": {
|
|
"power_factor": "Power factor",
|
|
"voltage": "Voltage"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
"selector": {
|
|
"daily_energy_value": {
|
|
"choices": {
|
|
"value": "Value",
|
|
"value_template": "Value template"
|
|
}
|
|
},
|
|
"fixed_value": {
|
|
"choices": {
|
|
"power": "Power",
|
|
"power_template": "Power template",
|
|
"states_power": "States power"
|
|
}
|
|
}
|
|
},
|
|
"services": {
|
|
"activate_playbook": {
|
|
"description": "Start execution of a playbook.",
|
|
"fields": {
|
|
"playbook_id": {
|
|
"description": "Playbook identifier.",
|
|
"name": "Playbook"
|
|
}
|
|
},
|
|
"name": "Activate playbook"
|
|
},
|
|
"calibrate_energy": {
|
|
"description": "Sets the energy sensor to a given kWh value.",
|
|
"fields": {
|
|
"value": {
|
|
"description": "The value to set.",
|
|
"name": "Hodnota"
|
|
}
|
|
},
|
|
"name": "Kalibrovat senzor energie"
|
|
},
|
|
"calibrate_cost": {
|
|
"description": "Sets the cost sensor to a given monetary value.",
|
|
"fields": {
|
|
"value": {
|
|
"description": "The value to set.",
|
|
"name": "Value"
|
|
}
|
|
},
|
|
"name": "Calibrate cost sensor"
|
|
},
|
|
"calibrate_utility_meter": {
|
|
"description": "Calibrates a utility meter sensor.",
|
|
"fields": {
|
|
"value": {
|
|
"description": "The value to set.",
|
|
"name": "Hodnota"
|
|
}
|
|
},
|
|
"name": "Calibrate utility meter"
|
|
},
|
|
"change_gui_config": {
|
|
"description": "Batch change configuration of all Powercalc config entries",
|
|
"fields": {
|
|
"field": {
|
|
"description": "Pole, které chcete změnit",
|
|
"name": "Hodnota"
|
|
},
|
|
"value": {
|
|
"description": "The value to set.",
|
|
"name": "Hodnota"
|
|
}
|
|
},
|
|
"name": "Change GUI config"
|
|
},
|
|
"debug_group": {
|
|
"description": "Get a debug overview of a group power or energy sensor including current member values.",
|
|
"name": "Debug group"
|
|
},
|
|
"get_active_playbook": {
|
|
"description": "Get current running playbook",
|
|
"name": "Get active playbook"
|
|
},
|
|
"get_group_entities": {
|
|
"description": "Retrieve all entity id's of a group energy or power sensor",
|
|
"name": "Get group entities"
|
|
},
|
|
"increase_daily_energy": {
|
|
"description": "Increases the sensor with a given amount.",
|
|
"fields": {
|
|
"value": {
|
|
"description": "Hodnota, která se připočítá k senzoru.",
|
|
"name": "Value"
|
|
}
|
|
},
|
|
"name": "Increase daily energy sensor"
|
|
},
|
|
"reload": {
|
|
"description": "Reload Powercalc configuration and entities",
|
|
"name": "Reload"
|
|
},
|
|
"reset_energy": {
|
|
"description": "Reset an energy sensor to zero kWh.",
|
|
"name": "Reset energy sensor"
|
|
},
|
|
"reset_cost": {
|
|
"description": "Reset a cost sensor to zero.",
|
|
"name": "Reset cost sensor"
|
|
},
|
|
"stop_playbook": {
|
|
"description": "Stop currently active playbook.",
|
|
"name": "Stop playbook"
|
|
},
|
|
"switch_sub_profile": {
|
|
"description": "Some profiles in the library has different sub profiles. This service allows you to switch to another one.",
|
|
"fields": {
|
|
"profile": {
|
|
"name": "Sub profile",
|
|
"description": "Define one of the possible sub profiles"
|
|
}
|
|
},
|
|
"name": "Switch to another sub profile"
|
|
}
|
|
}
|
|
}
|