10 files
This commit is contained in:
Home Assistant Version Control
@@ -21,42 +21,143 @@
|
||||
"not_K": "Not a K-series printer"
|
||||
}
|
||||
},
|
||||
"common": {
|
||||
"title_fallback": "Creality Printer",
|
||||
"channel_live": "3D Print",
|
||||
"channel_finished": "3D Print Finished",
|
||||
"channel_alerts": "3D Print Alerts",
|
||||
"channel_soon": "3D Print Finishing Soon",
|
||||
"action_pause": "Pause",
|
||||
"action_resume": "Resume",
|
||||
"action_stop": "Stop",
|
||||
"action_dismiss": "Hide",
|
||||
"status_starting": "Starting",
|
||||
"status_paused": "Paused",
|
||||
"status_finishing": "Finishing",
|
||||
"body_progress": "{progress}%",
|
||||
"body_paused": "Paused at {progress}%",
|
||||
"body_paused_unknown": "Paused",
|
||||
"body_layer": "{layer}/{total_layers}",
|
||||
"body_time_left": "{duration}",
|
||||
"body_fallback": "Printing",
|
||||
"duration_hours_minutes": "{hours}h {minutes}m",
|
||||
"duration_minutes": "{minutes}m",
|
||||
"duration_seconds": "{seconds}s",
|
||||
"filament_length": "{metres} m",
|
||||
"completed": "{device} finished.",
|
||||
"stopped": "{device} stopped at {progress}%",
|
||||
"completed_detailed": "{device} finished. {filament} consumed.",
|
||||
"error": "{device} error - {key} [{code}]",
|
||||
"filament_runout": "{device} filament ran out. Print is {state}. Change the filament.",
|
||||
"finishing_soon": "{device} will finish in {minutes} minutes."
|
||||
},
|
||||
"exceptions": {
|
||||
"unsupported_ha_version": {
|
||||
"message": "This version of the Creality WebSocket integration needs Home Assistant {minimum} or newer, but this system is running {running}. Update Home Assistant, or install integration version 0.9.7 instead."
|
||||
}
|
||||
},
|
||||
"selector": {
|
||||
"camera_mode": {
|
||||
"options": {
|
||||
"auto": "Auto (detect by model)",
|
||||
"mjpeg": "MJPEG (K1 family)",
|
||||
"webrtc": "WebRTC via go2rtc (K2 family)",
|
||||
"webrtc_direct": "WebRTC direct, no go2rtc (alternative)",
|
||||
"custom": "Custom camera URL (MJPEG / RTSP)"
|
||||
}
|
||||
}
|
||||
},
|
||||
"options": {
|
||||
"step": {
|
||||
"init": {
|
||||
"title": "Printer Configuration",
|
||||
"description": "Choose a settings group to edit. Each group opens its own page so its options always load fresh.",
|
||||
"description": "Choose a settings group to edit. Each group opens its own page, and pressing Submit on that page saves it and applies it right away. There is nothing to confirm afterwards: close this dialog whenever you are finished.",
|
||||
"menu_options": {
|
||||
"camera": "Camera",
|
||||
"notifications": "Notifications",
|
||||
"power": "Power switch",
|
||||
"connection": "Connection & performance",
|
||||
"save": "Save and apply"
|
||||
"connection": "Connection & performance"
|
||||
}
|
||||
},
|
||||
"camera": {
|
||||
"title": "Camera",
|
||||
"description": "{camera_help}",
|
||||
"description": "Camera streaming mode. Auto detects from the printer model. WebRTC via go2rtc is the default for K2-family printers; WebRTC direct is an alternative that signals the printer itself (no go2rtc) - try it if the default does not work, e.g. on newer K1C firmware. Custom lets you point at any http(s) MJPEG/snapshot URL or an rtsp:// stream (served via go2rtc). Leave the go2rtc RTSP port at 0 unless HLS / camera.record needs a non-default port. Submit saves this page and returns to the menu.",
|
||||
"data": {
|
||||
"camera_mode": "Camera Streaming Mode",
|
||||
"go2rtc_url": "External go2rtc Host/URL (if needed)",
|
||||
"go2rtc_port": "External go2rtc Port",
|
||||
"go2rtc_rtsp_port": "go2rtc RTSP Port (0 = auto: 18554 built-in, 8554 external)",
|
||||
"custom_camera_url": "Custom Camera URL (http(s) MJPEG/snapshot or rtsp://)"
|
||||
}
|
||||
},
|
||||
"notifications": {
|
||||
"title": "Notifications",
|
||||
"description": "Choose where notifications go, then what you want to be told about. Pressing Submit saves this page and applies it right away.",
|
||||
"data": {
|
||||
"notify_device": "Notification Device",
|
||||
"notify_completed": "Notify when Completed",
|
||||
"notify_error": "Notify on Error",
|
||||
"notify_minutes_to_end": "Notify before Completion",
|
||||
"minutes_to_end_value": "Minutes before Completion"
|
||||
"notify_targets": "Send notifications to"
|
||||
},
|
||||
"data_description": {
|
||||
"notify_targets": "Pick one or more. Only Home Assistant companion app targets can show the live print card, the G-code preview or the buttons; any other notify platform receives the title and message only."
|
||||
},
|
||||
"sections": {
|
||||
"events": {
|
||||
"name": "What to notify me about",
|
||||
"description": "The live print card needs Home Assistant 2026.7 or newer plus iOS 17.2+ or Android 16+, and iOS ends it after 8 hours on very long prints.",
|
||||
"data": {
|
||||
"notify_live": "Live print card",
|
||||
"notify_completed": "When a print ends",
|
||||
"notify_error": "Errors and filament runout",
|
||||
"notify_minutes_to_end": "Shortly before a print ends",
|
||||
"minutes_to_end_value": "How long before"
|
||||
},
|
||||
"data_description": {
|
||||
"notify_live": "One notification for the whole print that updates in place, with a progress bar and a countdown that ticks on the phone.",
|
||||
"notify_completed": "Covers both endings: a print that finished, and one that was stopped, whether from the printer, the Creality app or Home Assistant.",
|
||||
"notify_error": "A printer error, or a spool that has run out.",
|
||||
"notify_minutes_to_end": "A reminder to go and watch the last layers, on its own so the live card cannot replace it."
|
||||
}
|
||||
},
|
||||
"extras": {
|
||||
"name": "Buttons, pictures and tapping",
|
||||
"description": "All of these need a companion app target, and are ignored by every other notify platform.",
|
||||
"data": {
|
||||
"notify_actions": "Pause, Resume and Stop buttons",
|
||||
"notify_preview_image": "G-code preview as the icon",
|
||||
"notify_camera_snapshot": "Camera snapshot when a print ends",
|
||||
"notify_tap_path": "Dashboard path to open on tap"
|
||||
},
|
||||
"data_description": {
|
||||
"notify_actions": "Stop asks for device authentication, so a mis-tap on a lock screen cannot end a long print.",
|
||||
"notify_preview_image": "Skipped when the printer has no preview to serve, rather than sending an empty grey box.",
|
||||
"notify_camera_snapshot": "What the bed actually looks like. Skipped on printers whose camera cannot take a still.",
|
||||
"notify_tap_path": "For example /lovelace/printer. Left empty, an Android tap opens the printer camera and an iOS tap opens the app; this is the only way to make an iOS tap go anywhere specific."
|
||||
}
|
||||
},
|
||||
"text": {
|
||||
"name": "Custom text",
|
||||
"description": "Write your own wording, or leave a field empty to keep the built-in, translated text. A placeholder the printer has not reported renders as nothing, so wrap anything optional in square brackets and the whole bracketed part disappears while its value is unknown, as in {example}. The brackets themselves are the syntax and are not shown; double them ([[ and ]]) for a bracket you want to keep. The title is always the printer name: Android fixes a live card's title when the card starts and cannot change it afterwards.",
|
||||
"data": {
|
||||
"notify_template_live": "Live print card",
|
||||
"notify_template_completed": "Print finished",
|
||||
"notify_template_stopped": "Print stopped",
|
||||
"notify_template_soon": "Shortly before the end",
|
||||
"notify_template_error": "Printer error",
|
||||
"notify_template_runout": "Filament runout"
|
||||
},
|
||||
"data_description": {
|
||||
"notify_template_live": "Placeholders: {fields_live}",
|
||||
"notify_template_completed": "Placeholders: {fields_completed}",
|
||||
"notify_template_stopped": "Placeholders: {fields_stopped}. Fewer than the others: the printer has already reset the progress, the job clock and the layer by the time a stop can be seen, so only what survives it is offered.",
|
||||
"notify_template_soon": "Placeholders: {fields_finishing_soon}",
|
||||
"notify_template_error": "Placeholders: {fields_error}",
|
||||
"notify_template_runout": "Placeholders: {fields_filament_runout}"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"power": {
|
||||
"title": "Power switch",
|
||||
"description": "{power_help}",
|
||||
"description": "Optional power switch entity ID (e.g. switch.smart_plug_name) to enable accurate 'Off' state detection.",
|
||||
"data": {
|
||||
"power_switch_enabled": "Enable Power Switch Detection",
|
||||
"power_switch": "Power Switch Entity"
|
||||
@@ -71,7 +172,8 @@
|
||||
}
|
||||
},
|
||||
"error": {
|
||||
"invalid_camera_url": "Enter a full URL including the scheme, e.g. http://192.168.1.50:8080/?action=stream or rtsp://192.168.1.50:554/stream."
|
||||
"invalid_camera_url": "Enter a full URL including the scheme, e.g. http://192.168.1.50:8080/?action=stream or rtsp://192.168.1.50:554/stream.",
|
||||
"unknown_placeholder": "That is not a placeholder this integration can fill. Check the list in the description above, and mind the spelling."
|
||||
}
|
||||
},
|
||||
"entity": {
|
||||
@@ -87,7 +189,6 @@
|
||||
"position_z": { "name": "Position Z" },
|
||||
"feedrate_pct": { "name": "Print Speed" },
|
||||
"flowrate_pct": { "name": "Flow Rate" },
|
||||
"system": { "name": "System" },
|
||||
"model_info": { "name": "Model" },
|
||||
"filament_status": {
|
||||
"name": "Filament Status",
|
||||
@@ -113,6 +214,9 @@
|
||||
}
|
||||
},
|
||||
"used_material_length": { "name": "Used Material Length" },
|
||||
"expected_material_length": { "name": "Expected Material Length" },
|
||||
"expected_material_weight": { "name": "Expected Material Weight" },
|
||||
"filament_consumption": { "name": "Filament Consumption" },
|
||||
"print_job_time": { "name": "Print Job Time" },
|
||||
"print_left_time": { "name": "Print Time Left" },
|
||||
"real_time_flow": { "name": "Real-Time Flow" },
|
||||
@@ -150,10 +254,7 @@
|
||||
"print_tuning_pct": { "name": "Print Tuning" },
|
||||
"nozzle_target": { "name": "Nozzle Target" },
|
||||
"bed_target": { "name": "Bed Target" },
|
||||
"chamber_target": { "name": "Chamber Target" },
|
||||
"model_fan_pct": { "name": "Model Fan" },
|
||||
"case_fan_pct": { "name": "Case Fan" },
|
||||
"side_fan_pct": { "name": "Side Fan" }
|
||||
"chamber_target": { "name": "Chamber Target" }
|
||||
},
|
||||
"fan": {
|
||||
"model_fan": { "name": "Model Fan" },
|
||||
@@ -163,9 +264,6 @@
|
||||
"light": {
|
||||
"light": { "name": "Light" }
|
||||
},
|
||||
"switch": {
|
||||
"light": { "name": "Light" }
|
||||
},
|
||||
"camera": {
|
||||
"printer_camera": { "name": "Printer Camera" }
|
||||
},
|
||||
@@ -193,6 +291,56 @@
|
||||
"description": "The printer(s) to request info from. If omitted, all connected printers will be queried."
|
||||
}
|
||||
}
|
||||
},
|
||||
"set_cfs_material": {
|
||||
"name": "Set CFS Material",
|
||||
"description": "Write filament settings to one CFS slot. Only the fields you supply are changed; leave a field out to keep the value the printer already has. Material type is required and cannot be blank, and a color, if you give one, must be six hex digits.",
|
||||
"fields": {
|
||||
"device_id": {
|
||||
"name": "Device",
|
||||
"description": "The printer(s) to write to."
|
||||
},
|
||||
"box_id": {
|
||||
"name": "Box ID",
|
||||
"description": "The box id as the printer reports it. See the box_id attribute on the slot's sensor; it is usually 1 for the first CFS unit."
|
||||
},
|
||||
"slot_id": {
|
||||
"name": "Slot ID",
|
||||
"description": "Slot number within the box, starting at 0."
|
||||
},
|
||||
"type": {
|
||||
"name": "Material Type",
|
||||
"description": "Filament type, for example PLA, PETG, ABS or TPU."
|
||||
},
|
||||
"name": {
|
||||
"name": "Material Name",
|
||||
"description": "Product name of the filament, for example Hyper PLA."
|
||||
},
|
||||
"vendor": {
|
||||
"name": "Vendor",
|
||||
"description": "Manufacturer or brand name."
|
||||
},
|
||||
"color": {
|
||||
"name": "Color",
|
||||
"description": "Color as six hex digits, for example #06c84f. For a multi-color spool, leave this field out rather than sending an empty value; the other fields still write."
|
||||
},
|
||||
"min_temp": {
|
||||
"name": "Minimum Temperature",
|
||||
"description": "Lowest printing temperature, in °C."
|
||||
},
|
||||
"max_temp": {
|
||||
"name": "Maximum Temperature",
|
||||
"description": "Highest printing temperature, in °C. Must not be below the minimum."
|
||||
},
|
||||
"pressure": {
|
||||
"name": "Pressure Advance",
|
||||
"description": "Pressure advance value, between 0 and 1."
|
||||
},
|
||||
"rfid": {
|
||||
"name": "RFID",
|
||||
"description": "The printer's material id. Leaving it empty omits the field, so the existing tag association is preserved."
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user