diff --git a/.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261011_035239.yaml b/.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261011_035239.yaml
new file mode 100644
index 00000000..457229bb
--- /dev/null
+++ b/.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261011_035239.yaml
@@ -0,0 +1,141 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-11T03:52:39.789581+00:00'
+tool: ha_config_set_automation
+config:
+ id: '1791477238729'
+ alias: SparkX i7 - Deduct filament in Spoolman on print complete
+ description: On print completion, deducts the final segment (used_material_length
+ delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+ matching the latched slot color (remaining weight > 0 guard), accumulates it per
+ slot, then sends a summary notification with total and per-slot breakdown whenever
+ anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+ the checkpoint.
+ triggers:
+ - trigger: state
+ entity_id: sensor.sparkx_i7_print_status
+ from: printing
+ to: completed
+ conditions: []
+ actions:
+ - variables:
+ old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+ cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+ checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+ | float(0) }}'
+ - variables:
+ final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+ | float(0.03))) | round(2) }}'
+ color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+ '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+ - variables:
+ spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+ %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+ lower) == color and (state_attr(e[:-10], ''location'') | default('''', true)
+ | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+ > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{%
+ endif %}{% endfor %}{{ ns.id }}'
+ - variables:
+ helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+ ''2'', ''3'', ''4''] else '''' }}'
+ - variables:
+ nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+ in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+ - if:
+ condition: template
+ value_template: '{{ final_grams | float > 0 }}'
+ then:
+ - choose:
+ - conditions:
+ condition: template
+ value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+ }}'
+ sequence:
+ - action: spoolman.use_spool_filament
+ data:
+ id: '{{ spool_id | int(0) }}'
+ use_weight: '{{ final_grams | float(0) }}'
+ - if:
+ condition: template
+ value_template: '{{ helper_idx != '''' }}'
+ then:
+ - action: input_number.set_value
+ target:
+ entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+ data:
+ value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+ | float(0)) + (final_grams | float) }}'
+ default:
+ - action: notify.persistent_notification
+ data:
+ title: 'Spoolman: no spool for slot color'
+ message: 'Print completed: final segment of {{ final_grams }} g from {{
+ old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+ }}) could not be deducted - no Spoolman spool in the CFS Lite location
+ with remaining weight matches that color. Register the new roll in Spoolman
+ with location CFS Lite, then adjust manually if needed.'
+ - action: notify.mobile_app_francos_ipad
+ data:
+ title: 'Spoolman: no spool for slot color'
+ message: 'Print completed: final segment of {{ final_grams }} g from {{
+ old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+ }}) could not be deducted - no Spoolman spool in the CFS Lite location
+ with remaining weight matches that color. Register the new roll in Spoolman
+ with location CFS Lite, then adjust manually if needed.'
+ - action: notify.mobile_app_sm_f956w
+ data:
+ title: 'Spoolman: no spool for slot color'
+ message: 'Print completed: final segment of {{ final_grams }} g from {{
+ old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+ }}) could not be deducted - no Spoolman spool in the CFS Lite location
+ with remaining weight matches that color. Register the new roll in Spoolman
+ with location CFS Lite, then adjust manually if needed.'
+ - variables:
+ summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+ ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+ | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+ (ns.t + (nonhelper_g | float)) | round(1) }}'
+ - variables:
+ summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+ ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+ | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+ states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+ round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+ %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+ ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+ }}'
+ - if:
+ condition: template
+ value_template: '{{ summary_total | float > 0 }}'
+ then:
+ - action: notify.persistent_notification
+ data:
+ title: Print complete - Spoolman updated
+ message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+ {{ summary_lines }}'
+ - action: notify.mobile_app_francos_ipad
+ data:
+ title: Print complete - Spoolman updated
+ message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+ {{ summary_lines }}'
+ - action: notify.mobile_app_sm_f956w
+ data:
+ title: Print complete - Spoolman updated
+ message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+ {{ summary_lines }}'
+ - action: input_number.set_value
+ target:
+ entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+ data:
+ value: '{{ cur }}'
+ - action: input_text.set_value
+ target:
+ entity_id: input_text.sparkx_i7_print_spool_latch
+ data:
+ value: ''
+ mode: single
diff --git a/.ha_mcp/backups/dashboard.sparkx-i7.20261011_035239.yaml b/.ha_mcp/backups/dashboard.sparkx-i7.20261011_035239.yaml
new file mode 100644
index 00000000..a1682876
--- /dev/null
+++ b/.ha_mcp/backups/dashboard.sparkx-i7.20261011_035239.yaml
@@ -0,0 +1,1373 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-10-11T03:52:39.703478+00:00'
+tool: ha_config_set_dashboard
+config:
+ views:
+ - max_columns: 4
+ path: print
+ sections:
+ - cards:
+ - bed: sensor.sparkx_i7_bed_temperature
+ camera: camera.sparkx_i7_printer_camera
+ grid_options:
+ columns: full
+ layer: sensor.sparkx_i7_working_layer
+ light: light.sparkx_i7_light
+ name: SparkX i7
+ nozzle: sensor.sparkx_i7_nozzle_temperature
+ pause_btn: button.sparkx_i7_pause_print
+ progress: sensor.sparkx_i7_print_progress
+ resume_btn: button.sparkx_i7_resume_print
+ status: sensor.sparkx_i7_print_status
+ stop_btn: button.sparkx_i7_stop_print
+ time_left: sensor.sparkx_i7_print_time_left
+ total_layers: sensor.sparkx_i7_total_layers
+ type: custom:k-printer-card
+ - grid_options:
+ columns: full
+ type: custom:webrtc-camera
+ ui: true
+ url: octoprint
+ - grid_options:
+ columns: full
+ type: custom:webrtc-camera
+ ui: true
+ url: octoprint2
+ - camera_image: camera.sparkx_i7_printer_camera
+ camera_view: live
+ entity: camera.sparkx_i7_printer_camera
+ fit_mode: cover
+ grid_options:
+ columns: full
+ show_name: true
+ show_state: true
+ type: picture-entity
+ - cards:
+ - grid_options:
+ columns: 6
+ image_entity: image.sparkx_i7_current_print_preview
+ show_name: false
+ type: picture
+ - entity: sensor.sparkx_i7_active_filament_slot
+ icon: mdi:palette
+ icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+ ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+ '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+ endif %}'
+ multiline_secondary: true
+ name: Active Color
+ primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+ %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+ }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+ }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+ }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+ }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+ }}{% else %}Unknown{% endif %}'
+ secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+ \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+ \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+ \ 'filament') }}{% endif %}"
+ type: custom:mushroom-template-card
+ grid_options:
+ columns: full
+ type: horizontal-stack
+ - entity: sensor.sparkx_i7_print_status
+ grid_options:
+ columns: 12
+ icon: mdi:state-machine
+ name: Status
+ type: tile
+ - entity: sensor.sparkx_i7_position_z_2_decimals
+ grid_options:
+ columns: 4
+ icon: mdi:axis-z-arrow
+ name: Current Z
+ type: tile
+ - entity: sensor.sparkx_i7_position_x
+ grid_options:
+ columns: 4
+ icon: mdi:axis-x-arrow
+ name: X
+ type: tile
+ - entity: sensor.sparkx_i7_position_y
+ grid_options:
+ columns: 4
+ icon: mdi:axis-y-arrow
+ name: Y
+ type: tile
+ - entity: sensor.sparkx_i7_print_status
+ grid_options:
+ columns: 6
+ icon: mdi:message-alert-outline
+ multiline_secondary: true
+ name: Printer Message
+ primary: '{{ states("sensor.sparkx_i7_print_status") | replace("_", " ") |
+ title }}'
+ secondary: '{% set err = state_attr("sensor.sparkx_i7_print_status", "err")
+ or {} %}{% set code = err.get("errcode", 0) | int(0) %}{% set msg = err.get("value",
+ "") %}{% if state_attr("sensor.sparkx_i7_print_status", "paused_flag") |
+ default(false) %}Print paused{% elif msg %}ERROR {{ code }}: {{ msg }}{%
+ elif code %}Printer error {{ code }}{% else %}No printer error{% endif %}'
+ type: custom:mushroom-template-card
+ - entity: sensor.sparkx_i7_print_status
+ grid_options:
+ columns: 6
+ icon: mdi:file-document-outline
+ multiline_secondary: true
+ name: Current File
+ primary: Current File
+ secondary: '{% set file = state_attr("sensor.sparkx_i7_print_status", "file")
+ or "" %}{% if file %}{{ file.split("/")[-1] | replace(".gcode", "") }}{%
+ else %}No active file{% endif %}'
+ type: custom:mushroom-template-card
+ type: grid
+ - cards:
+ - heading: Print Progress
+ icon: mdi:progress-clock
+ type: heading
+ - entity: sensor.sparkx_i7_print_progress
+ grid_options:
+ columns: 6
+ rows: 3
+ max: 100
+ min: 0
+ name: Progress
+ severity:
+ green: 0
+ red: 90
+ yellow: 40
+ type: gauge
+ unit: '%'
+ - grid_options:
+ columns: 6
+ icon: mdi:clock-start
+ multiline_secondary: true
+ name: Elapsed
+ primary: Elapsed
+ secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+ %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+ if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:clock-end
+ multiline_secondary: true
+ name: Remaining
+ primary: Remaining
+ secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+ %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+ m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+ m }} min{% endif %}{% endif %}'
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:clock-outline
+ multiline_secondary: true
+ primary: Est. Finish
+ secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+ \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+ \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:layers
+ multiline_secondary: true
+ name: Layer
+ primary: Layer
+ secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+ %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+ of {{ t }}'
+ type: custom:mushroom-template-card
+ - entity: light.sparkx_i7_light
+ grid_options:
+ columns: 6
+ icon: mdi:lightbulb
+ name: Printer Light
+ type: tile
+ - detail: 1
+ entity: sensor.sparkx_i7_print_progress
+ graph: line
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ name: Progress History
+ type: sensor
+ - entity: number.sparkx_i7_print_tuning
+ grid_options:
+ columns: 6
+ icon: mdi:speedometer
+ name: Print Tuning
+ type: tile
+ - entity: sensor.sparkx_i7_print_speed
+ grid_options:
+ columns: 6
+ icon: mdi:speedometer
+ name: Speed
+ type: tile
+ - entity: sensor.sparkx_i7_real_time_flow
+ grid_options:
+ columns: 6
+ icon: mdi:cube-send
+ name: Real-Time Flow
+ type: tile
+ - entity: sensor.sparkx_i7_flow_rate
+ grid_options:
+ columns: 6
+ icon: mdi:chart-gantt
+ name: Flow Rate
+ type: tile
+ - entity: sensor.sparkx_i7_current_object
+ grid_options:
+ columns: 6
+ icon: mdi:cube-outline
+ name: Object
+ type: tile
+ - entity: sensor.sparkx_i7_object_count
+ grid_options:
+ columns: 6
+ icon: mdi:counter
+ name: Object Count
+ type: tile
+ - type: tile
+ entity: sensor.sparkx_moonraker_totals_print_time
+ name: Total Print
+ vertical: false
+ features_position: bottom
+ type: grid
+ - cards:
+ - heading: Temperatures
+ icon: mdi:thermometer
+ type: heading
+ - entity: sensor.sparkx_i7_nozzle_temperature
+ grid_options:
+ columns: 4
+ max: 300
+ min: 0
+ name: Nozzle
+ severity:
+ green: 0
+ red: 240
+ yellow: 180
+ type: gauge
+ unit: "\xB0C"
+ - entity: sensor.sparkx_i7_bed_temperature
+ grid_options:
+ columns: 4
+ max: 100
+ min: 0
+ name: Bed
+ severity:
+ green: 0
+ red: 100
+ yellow: 60
+ type: gauge
+ unit: "\xB0C"
+ - entity: number.sparkx_i7_nozzle_target
+ grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle
+ name: Nozzle Target
+ type: tile
+ - entity: number.sparkx_i7_bed_target
+ grid_options:
+ columns: 6
+ icon: mdi:radiator
+ name: Bed Target
+ type: tile
+ - entities:
+ - color: '#ef5350'
+ entity: sensor.sparkx_i7_nozzle_temperature
+ name: Actual
+ - color: '#4caf50'
+ entity: number.sparkx_i7_nozzle_target
+ name: Target
+ expand_legend: true
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ show_names: true
+ title: Nozzle Temperature
+ type: history-graph
+ - entities:
+ - color: '#42a5f5'
+ entity: sensor.sparkx_i7_bed_temperature
+ name: Actual
+ - color: '#4caf50'
+ entity: number.sparkx_i7_bed_target
+ name: Target
+ expand_legend: true
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ show_names: true
+ title: Bed Temperature
+ type: history-graph
+ - type: custom:apexcharts-card
+ graph_span: 1h
+ header:
+ show: true
+ title: Fan Speeds
+ show_states: true
+ colorize_states: true
+ apex_config:
+ chart:
+ height: 200
+ legend:
+ show: false
+ grid:
+ xaxis:
+ lines:
+ show: true
+ borderColor: '#555'
+ yaxis:
+ - opposite: true
+ decimals: 0
+ tickAmount: 2
+ all_series_config:
+ stroke_width: 2
+ show:
+ name_in_header: true
+ series:
+ - entity: sensor.sparkx_moonraker_hotend_fan
+ name: Hotend
+ grid_options:
+ columns: full
+ type: grid
+ - cards:
+ - heading: Controls
+ icon: mdi:gesture-tap-button
+ type: heading
+ - entity: button.sparkx_i7_pause_print
+ grid_options:
+ columns: 4
+ icon: mdi:pause
+ name: Pause
+ tap_action:
+ action: perform-action
+ perform_action: button.press
+ target:
+ entity_id: button.sparkx_i7_pause_print
+ type: tile
+ - entity: button.sparkx_i7_resume_print
+ grid_options:
+ columns: 4
+ icon: mdi:play
+ name: Resume
+ tap_action:
+ action: perform-action
+ perform_action: button.press
+ target:
+ entity_id: button.sparkx_i7_resume_print
+ type: tile
+ - entity: button.sparkx_i7_reconnect
+ grid_options:
+ columns: 4
+ icon: mdi:lan-connect
+ name: Connect
+ tap_action:
+ action: perform-action
+ perform_action: button.press
+ target:
+ entity_id: button.sparkx_i7_reconnect
+ type: tile
+ - entity: button.sparkx_i7_stop_print
+ grid_options:
+ columns: 4
+ icon: mdi:cancel
+ name: Cancel Print
+ tap_action:
+ action: perform-action
+ perform_action: button.press
+ target:
+ entity_id: button.sparkx_i7_stop_print
+ type: tile
+ - entity: button.sparkx_i7_home_xy_then_z
+ grid_options:
+ columns: 4
+ icon: mdi:home-circle
+ name: Home
+ tap_action:
+ action: perform-action
+ perform_action: button.press
+ target:
+ entity_id: button.sparkx_i7_home_xy_then_z
+ type: tile
+ type: grid
+ - cards:
+ - heading: Filament
+ icon: mdi:printer-3d-nozzle-outline
+ type: heading
+ - entity: sensor.sparkx_i7_filament_weight_estimated
+ grid_options:
+ columns: 6
+ icon: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st in
+ [''printing'', ''paused''] %}mdi:printer-3d-nozzle{% else %}mdi:calendar-today{%
+ endif %}'
+ multiline_secondary: true
+ name: Filament Used
+ primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+ in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_filament_weight_estimated'')
+ | round(1) }} g{% else %}No active job{% endif %}'
+ secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st\
+ \ in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_used_material_length')\
+ \ | round(0) }} cm this job{% else %}{{ states('sensor.sparkx_i7_filament_weight_daily')\
+ \ | round(1) }} g \xB7 {{ states('sensor.sparkx_i7_filament_cost_daily')\
+ \ | round(2) }} $ today{% endif %}"
+ type: custom:mushroom-template-card
+ - entity: input_number.sparkx_i7_filament_g_cm
+ grid_options:
+ columns: 6
+ icon: mdi:weight-kilogram
+ name: g/cm
+ type: tile
+ - entity: sensor.sparkx_i7_used_material_length
+ grid_options:
+ columns: 6
+ icon: mdi:counter
+ multiline_secondary: true
+ name: Used Length
+ primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+ in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_used_material_length'')
+ | round(0) }} cm{% else %}{{ (states(''sensor.sparkx_i7_filament_weight_daily'')
+ | float(0) / states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298))
+ | round(0) }} cm{% endif %}'
+ secondary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if
+ st in [''printing'', ''paused''] %}this job (printer-reported){% else %}today,
+ from today''s weight{% endif %}'
+ type: custom:mushroom-template-card
+ - entity: sensor.sparkx_i7_filament_cost
+ grid_options:
+ columns: 3
+ icon: mdi:cash
+ name: Job Cost (total)
+ type: tile
+ - entity: sensor.sparkx_i7_filament_cost_daily
+ grid_options:
+ columns: 3
+ icon: mdi:cash-multiple
+ name: Today
+ type: tile
+ - entity: sensor.sparkx_i7_filament_cost_weekly
+ grid_options:
+ columns: 3
+ icon: mdi:cash-multiple
+ name: This Week
+ type: tile
+ - entity: sensor.sparkx_i7_filament_cost_monthly
+ grid_options:
+ columns: 3
+ icon: mdi:cash-multiple
+ name: This Month
+ type: tile
+ type: grid
+ title: Print
+ type: sections
+ - max_columns: 2
+ path: history
+ sections:
+ - cards:
+ - heading: Temperature History
+ icon: mdi:chart-line-variant
+ type: heading
+ - entities:
+ - color: '#ef5350'
+ entity: sensor.sparkx_i7_nozzle_temperature
+ name: Nozzle
+ - color: '#ffab91'
+ entity: number.sparkx_i7_nozzle_target
+ name: Nozzle Target
+ - color: '#42a5f5'
+ entity: sensor.sparkx_i7_bed_temperature
+ name: Bed
+ - color: '#90caf9'
+ entity: number.sparkx_i7_bed_target
+ name: Bed Target
+ expand_legend: true
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ show_names: true
+ title: Temperatures (24h)
+ type: history-graph
+ - entities:
+ - color: '#ef5350'
+ entity: sensor.sparkx_i7_nozzle_temperature
+ name: Nozzle
+ - color: '#42a5f5'
+ entity: sensor.sparkx_i7_bed_temperature
+ name: Bed
+ expand_legend: true
+ grid_options:
+ columns: full
+ hours_to_show: 168
+ show_names: true
+ title: Temperatures (7 days)
+ type: history-graph
+ type: grid
+ - cards:
+ - heading: Print Activity
+ icon: mdi:chart-box-outline
+ type: heading
+ - apex_config:
+ chart:
+ height: 300
+ stroke:
+ width: 1
+ graph_span: 24h
+ grid_options:
+ columns: full
+ header:
+ colorize_states: true
+ show: true
+ show_states: true
+ title: Z Position (24h)
+ series:
+ - color: '#ab47bc'
+ curve: straight
+ entity: sensor.sparkx_i7_position_z
+ fill_raw: last
+ name: Current Z
+ type: line
+ type: custom:apexcharts-card
+ - entities:
+ - color: '#66bb6a'
+ entity: sensor.sparkx_i7_print_progress
+ name: Progress
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ show_names: true
+ title: Print Progress (24h)
+ type: history-graph
+ - entities:
+ - color: '#26c6da'
+ entity: sensor.sparkx_i7_print_job_time
+ name: Elapsed
+ - color: '#ffa726'
+ entity: sensor.sparkx_i7_print_time_left
+ name: Remaining
+ grid_options:
+ columns: full
+ hours_to_show: 24
+ show_names: true
+ title: Print Duration (24h)
+ type: history-graph
+ type: grid
+ title: History
+ type: sections
+ - icon: mdi:printer-3d-nozzle-outline
+ max_columns: 4
+ path: cfs-fans
+ sections:
+ - cards:
+ - heading: CFS Box 1
+ icon: mdi:file-cabinet
+ type: heading
+ - entity: sensor.sparkx_i7_cfs_box_1_temperature
+ grid_options:
+ columns: 6
+ icon: mdi:thermometer
+ name: Temperature
+ type: tile
+ - entity: sensor.sparkx_i7_cfs_box_1_humidity
+ grid_options:
+ columns: 6
+ icon: mdi:water-percent
+ name: Humidity
+ type: tile
+ - grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')|default('''')|string
+ %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+ }}{% endif %}'
+ multiline_secondary: true
+ name: Slot 1
+ primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+ secondary: "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{%\
+ \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+ \ }}% left"
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')|default('''')|string
+ %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+ }}{% endif %}'
+ multiline_secondary: true
+ name: Slot 2
+ primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+ secondary: "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{%\
+ \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+ \ }}% left"
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')|default('''')|string
+ %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+ }}{% endif %}'
+ multiline_secondary: true
+ name: Slot 3
+ primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+ secondary: "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{%\
+ \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+ \ }}% left"
+ type: custom:mushroom-template-card
+ - grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')|default('''')|string
+ %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+ }}{% endif %}'
+ multiline_secondary: true
+ name: Slot 4
+ primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+ secondary: "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{%\
+ \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+ \ }}% left"
+ type: custom:mushroom-template-card
+ type: grid
+ - cards:
+ - heading: External / Active
+ icon: mdi:printer-3d
+ type: heading
+ - cards:
+ - entity: sensor.sparkx_i7_active_filament_slot
+ grid_options:
+ columns: 6
+ icon: mdi:swap-horizontal
+ name: Active Slot
+ type: tile
+ - entity: sensor.sparkx_i7_active_filament_slot
+ icon: mdi:palette
+ icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+ ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+ '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+ endif %}'
+ multiline_secondary: true
+ name: Active Color
+ primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+ %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+ }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+ }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+ }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+ }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+ }}{% else %}Unknown{% endif %}'
+ secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+ \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+ \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+ \ 'filament') }}{% endif %}"
+ type: custom:mushroom-template-card
+ grid_options:
+ columns: full
+ type: horizontal-stack
+ - grid_options:
+ columns: 6
+ icon: mdi:lan-outline
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_external_color'')|default('''')|string
+ %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+ }}{% endif %}'
+ multiline_secondary: true
+ name: External Filament
+ primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+ secondary: "{% set col = states('sensor.sparkx_i7_external_color_name') %}{%\
+ \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+ \ }}% left"
+ type: custom:mushroom-template-card
+ - entity: sensor.sparkx_i7_filament_status
+ grid_options:
+ columns: 6
+ icon: mdi:printer-3d-nozzle-alert
+ name: Filament Status
+ type: tile
+ type: grid
+ - cards:
+ - heading: Fans
+ icon: mdi:fan
+ type: heading
+ - entity: fan.sparkx_i7_model_fan
+ features:
+ - type: fan-speed
+ grid_options:
+ columns: 4
+ icon: mdi:fan
+ name: Model Fan
+ type: tile
+ - entity: fan.sparkx_i7_case_fan
+ features:
+ - type: fan-speed
+ grid_options:
+ columns: 4
+ icon: mdi:fan
+ name: Case Fan
+ type: tile
+ - entity: fan.sparkx_i7_side_fan
+ features:
+ - type: fan-speed
+ grid_options:
+ columns: 4
+ icon: mdi:fan
+ name: Side Fan
+ type: tile
+ type: grid
+ title: CFS / Fans
+ type: sections
+ - title: Spoolman
+ path: spoolman
+ icon: mdi:package-variant-closed
+ type: sections
+ max_columns: 4
+ sections:
+ - type: grid
+ cards:
+ - type: heading
+ heading: "CFS Slots \u2014 per-color deduction"
+ icon: mdi:printer-filament
+ - type: custom:auto-entities
+ card:
+ type: grid
+ columns: 4
+ square: false
+ card_param: cards
+ filter:
+ template: "{% set ns = namespace(cards=[]) %}\n{% for s in states.sensor\
+ \ %}\n {% if s.entity_id.startswith('sensor.spoolman_spool_') %}\n \
+ \ {% set loc = (s.attributes.location | default('')) | lower %}\n \
+ \ {% if 'cfs lite' in loc %}\n {% set hex = s.attributes.filament_color_hex\
+ \ | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#')\
+ \ else '#' ~ hex %}\n {% set remain = (s.attributes.remaining_weight\
+ \ | default(s.state) | float(0)) | round(1) %}\n {% set total = (s.attributes.initial_weight\
+ \ | default(1000) | float(1000)) %}\n {% set raw_pct = ((remain /\
+ \ total) * 100) | round(1) %}\n {% set pct = 0 if raw_pct < 0 else\
+ \ (100 if raw_pct > 100 else raw_pct) %}\n {% set border = '#d0d0d0'\
+ \ if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n\n\
+ \ {% set card = {\n \"type\": \"custom:button-card\",\n \
+ \ \"entity\": s.entity_id,\n \"show_icon\": false,\n \
+ \ \"show_state\": false,\n \"show_name\": false,\n \"\
+ custom_fields\": {\n \"tube\": \"\"\n \
+ \ },\n \"styles\": {\n \"card\": [\n {\"\
+ background\": \"transparent\"},\n {\"box-shadow\": \"none\"\
+ },\n {\"border\": \"none\"},\n {\"padding\": \"\
+ 8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\"\
+ : \"column\"},\n {\"align-items\": \"center\"}\n ],\n\
+ \ \"custom_fields\": {\n \"tube\": [\n \
+ \ {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n \
+ \ {\"justify-content\": \"center\"}\n ]\n \
+ \ }\n },\n \"extra_styles\": \"\n .tube-bg\
+ \ {\n position: relative;\n width: 60px;\n \
+ \ height: 180px;\n background-color: #dedede;\n \
+ \ border-radius: 20px;\n overflow: hidden;\n \
+ \ border: 1px solid \" ~ border ~ \";\n display: flex;\n\
+ \ flex-direction: column;\n justify-content: flex-end;\n\
+ \ }\n .tube-fill {\n width: 100%;\n \
+ \ border-radius: 0 0 19px 19px;\n }\n .tube-text\
+ \ {\n position: absolute;\n top: 48%;\n \
+ \ left: 50%;\n transform: translate(-50%, -50%);\n \
+ \ font-size: 13px;\n font-weight: 800;\n color:\
+ \ #111111;\n pointer-events: none;\n z-index: 2;\n\
+ \ white-space: nowrap;\n }\n \",\n \"\
+ tap_action\": {\n \"action\": \"more-info\"\n }\n \
+ \ } %}\n {% set ns.cards = ns.cards + [card] %}\n {% endif %}\n\
+ \ {% endif %}\n{% endfor %}\n{{ ns.cards }}"
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+ name: Slot 1
+ icon: mdi:printer-filament
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ primary: '{{ states(''sensor.sparkx_i7_slot_1_color_name'') }} (#{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')
+ | replace(''#'', '''') | upper }})'
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 Spool\
+ \ {{ ns.id }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor')\
+ \ | default('?', true) }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id\
+ \ ~ '_material') | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_'\
+ \ ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown',\
+ \ 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022 No spool\
+ \ with stock matches this color{% endif %}\n\u2022 This print: {{ (states('input_number.sparkx_i7_slot_1_grams')\
+ \ | float(0)) | round(1) }} g"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ picture: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'') |
+ replace(''#'','''') | lower %}{% set svg = '''' %}{{ ''data:image/svg+xml;base64,''
+ ~ svg | base64_encode if c | length == 6 else '''' }}'
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+ name: Slot 2
+ icon: mdi:printer-filament
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ primary: '{{ states(''sensor.sparkx_i7_slot_2_color_name'') }} (#{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')
+ | replace(''#'', '''') | upper }})'
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 Spool\
+ \ {{ ns.id }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor')\
+ \ | default('?', true) }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id\
+ \ ~ '_material') | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_'\
+ \ ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown',\
+ \ 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022 No spool\
+ \ with stock matches this color{% endif %}\n\u2022 This print: {{ (states('input_number.sparkx_i7_slot_2_grams')\
+ \ | float(0)) | round(1) }} g"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ picture: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'') |
+ replace(''#'','''') | lower %}{% set svg = '''' %}{{ ''data:image/svg+xml;base64,''
+ ~ svg | base64_encode if c | length == 6 else '''' }}'
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+ name: Slot 3
+ icon: mdi:printer-filament
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ primary: '{{ states(''sensor.sparkx_i7_slot_3_color_name'') }} (#{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')
+ | replace(''#'', '''') | upper }})'
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 Spool\
+ \ {{ ns.id }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor')\
+ \ | default('?', true) }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id\
+ \ ~ '_material') | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_'\
+ \ ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown',\
+ \ 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022 No spool\
+ \ with stock matches this color{% endif %}\n\u2022 This print: {{ (states('input_number.sparkx_i7_slot_3_grams')\
+ \ | float(0)) | round(1) }} g"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ picture: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'') |
+ replace(''#'','''') | lower %}{% set svg = '''' %}{{ ''data:image/svg+xml;base64,''
+ ~ svg | base64_encode if c | length == 6 else '''' }}'
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+ name: Slot 4
+ icon: mdi:printer-filament
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ primary: '{{ states(''sensor.sparkx_i7_slot_4_color_name'') }} (#{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')
+ | replace(''#'', '''') | upper }})'
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 Spool\
+ \ {{ ns.id }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor')\
+ \ | default('?', true) }} \xB7 {{ states('sensor.spoolman_spool_' ~ ns.id\
+ \ ~ '_material') | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_'\
+ \ ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown',\
+ \ 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022 No spool\
+ \ with stock matches this color{% endif %}\n\u2022 This print: {{ (states('input_number.sparkx_i7_slot_4_grams')\
+ \ | float(0)) | round(1) }} g"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ picture: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'') |
+ replace(''#'','''') | lower %}{% set svg = '''' %}{{ ''data:image/svg+xml;base64,''
+ ~ svg | base64_encode if c | length == 6 else '''' }}'
+ - type: heading
+ icon: mdi:printer-3d-nozzle-outline
+ heading_style: title
+ heading: Usage
+ - type: tile
+ entity: input_number.sparkx_i7_spoolman_length_checkpoint
+ name: Length Checkpoint (cm)
+ icon: mdi:ruler-measure
+ grid_options:
+ columns: full
+ - type: tile
+ entity: input_text.sparkx_i7_print_spool_latch
+ name: Latched CFS Slot
+ icon: mdi:link-variant
+ grid_options:
+ columns: full
+ - type: tile
+ entity: sensor.sparkx_i7_used_material_length
+ name: Used Material Total (cm)
+ icon: mdi:plus-minus
+ grid_options:
+ columns: full
+ - type: tile
+ entity: sensor.sparkx_i7_filament_weight_estimated
+ name: Current Job Weight (est.)
+ icon: mdi:weight-gram
+ grid_options:
+ columns: 12
+ rows: 1
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_active_filament_slot
+ name: Next Deduction Match
+ icon: mdi:magnet
+ icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+ %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+ '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+ == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+ primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+ secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+ \ %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_'))\
+ \ ~ '_color' %}{% set color = states(ce) | replace('#', '') | lower %}{%\
+ \ set ns = namespace(id='') %}{% for e in integration_entities('spoolman')\
+ \ %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower)\
+ \ == color and (state_attr(e[:-10], 'location') | default('', true) | lower)\
+ \ == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0\
+ \ and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif\
+ \ %}{% endfor %}{% if ns.id %}Color #{{ color | upper }} \u2192 spool {{\
+ \ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name')\
+ \ }} \xB7 {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1)\
+ \ }} g left){% elif slot in ['', 'unknown', 'unavailable'] %}No slot latched{%\
+ \ elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{%\
+ \ else %}Color #{{ color | upper }} \u2014 no spool with stock{% endif %}"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ - type: markdown
+ content: "**Spoolman UI:** [http://192.168.1.140:7912](http://192.168.1.140:7912)\n\
+ \nEach CFS slot is matched to the Spoolman spool with the same **color hex**\
+ \ that still has stock (remaining > 0) **and whose location is CFS Lite**.\
+ \ All 4 rolls live in the **CFS Lite** location in Spoolman.\n\n**Replaced\
+ \ a roll?** Register the new roll in Spoolman with the same color hex and\
+ \ location CFS Lite. No Home Assistant changes needed \u2014 a same-color\
+ \ roll in another location (e.g. Storage) is ignored, and exhausted spools\
+ \ are skipped automatically."
+ grid_options:
+ columns: full
+ - type: grid
+ cards:
+ - type: heading
+ heading: "Spool Details \u2014 CFS Lite"
+ icon: mdi:spool
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+ name: Slot 1
+ icon: mdi:spool
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ picture: '{% set color = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')
+ | replace(''#'', '''') | lower %}{% set ns = namespace(id='''') %}{% for
+ e in integration_entities(''spoolman'') %}{% if e.endswith(''_color_hex'')
+ and (states(e) | replace(''#'', '''') | lower) == color and (state_attr(e[:-10],
+ ''location'') | default('''', true) | lower) == ''cfs lite'' %}{% set b
+ = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '''' %}{% set
+ ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{ state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') if ns.id and state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') else '''' }}'
+ primary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id\
+ \ }} \xB7 {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name')\
+ \ | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable']\
+ \ %}Slot color unavailable{% else %}No spool with stock matches this color{%\
+ \ endif %}"
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_vendor_name') | default('?', true) }} \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_material') | default('?', true) }} \xB7 #{{ color |\
+ \ upper }}\n\u2022 Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g \xB7 used {{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n\u2022 Remaining\
+ \ length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length')\
+ \ | float(0)) / 1000) | round(1) }} m \xB7 used {{ ((state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n\u2022 Spool:\
+ \ \xD8{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter')\
+ \ | default('?', true) }} mm \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_density') | default('?', true) }} g/cm\xB3 \xB7 {{\
+ \ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?',\
+ \ true) }} g \xB7 art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number')\
+ \ | default('?', true) }}\n\u2022 Temps: bed {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}\xB0C \xB7\
+ \ hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp')\
+ \ | default('?', true) }}\xB0C\n\u2022 Flow: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_flow_rate') }} \xB7 Runout est.: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_estimated_runout') }}\n\u2022 Registered: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'registered') | default('?', true) }} \xB7 Location: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'location') | default('?', true) }} \xB7 Price: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['',\
+ \ 'unknown', 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022\
+ \ No spool with stock matches this color{% endif %}"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+ name: Slot 2
+ icon: mdi:spool
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ picture: '{% set color = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')
+ | replace(''#'', '''') | lower %}{% set ns = namespace(id='''') %}{% for
+ e in integration_entities(''spoolman'') %}{% if e.endswith(''_color_hex'')
+ and (states(e) | replace(''#'', '''') | lower) == color and (state_attr(e[:-10],
+ ''location'') | default('''', true) | lower) == ''cfs lite'' %}{% set b
+ = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '''' %}{% set
+ ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{ state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') if ns.id and state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') else '''' }}'
+ primary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id\
+ \ }} \xB7 {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name')\
+ \ | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable']\
+ \ %}Slot color unavailable{% else %}No spool with stock matches this color{%\
+ \ endif %}"
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_vendor_name') | default('?', true) }} \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_material') | default('?', true) }} \xB7 #{{ color |\
+ \ upper }}\n\u2022 Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g \xB7 used {{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n\u2022 Remaining\
+ \ length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length')\
+ \ | float(0)) / 1000) | round(1) }} m \xB7 used {{ ((state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n\u2022 Spool:\
+ \ \xD8{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter')\
+ \ | default('?', true) }} mm \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_density') | default('?', true) }} g/cm\xB3 \xB7 {{\
+ \ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?',\
+ \ true) }} g \xB7 art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number')\
+ \ | default('?', true) }}\n\u2022 Temps: bed {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}\xB0C \xB7\
+ \ hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp')\
+ \ | default('?', true) }}\xB0C\n\u2022 Flow: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_flow_rate') }} \xB7 Runout est.: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_estimated_runout') }}\n\u2022 Registered: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'registered') | default('?', true) }} \xB7 Location: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'location') | default('?', true) }} \xB7 Price: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['',\
+ \ 'unknown', 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022\
+ \ No spool with stock matches this color{% endif %}"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+ name: Slot 3
+ icon: mdi:spool
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ picture: '{% set color = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')
+ | replace(''#'', '''') | lower %}{% set ns = namespace(id='''') %}{% for
+ e in integration_entities(''spoolman'') %}{% if e.endswith(''_color_hex'')
+ and (states(e) | replace(''#'', '''') | lower) == color and (state_attr(e[:-10],
+ ''location'') | default('''', true) | lower) == ''cfs lite'' %}{% set b
+ = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '''' %}{% set
+ ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{ state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') if ns.id and state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') else '''' }}'
+ primary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id\
+ \ }} \xB7 {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name')\
+ \ | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable']\
+ \ %}Slot color unavailable{% else %}No spool with stock matches this color{%\
+ \ endif %}"
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_vendor_name') | default('?', true) }} \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_material') | default('?', true) }} \xB7 #{{ color |\
+ \ upper }}\n\u2022 Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g \xB7 used {{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n\u2022 Remaining\
+ \ length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length')\
+ \ | float(0)) / 1000) | round(1) }} m \xB7 used {{ ((state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n\u2022 Spool:\
+ \ \xD8{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter')\
+ \ | default('?', true) }} mm \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_density') | default('?', true) }} g/cm\xB3 \xB7 {{\
+ \ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?',\
+ \ true) }} g \xB7 art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number')\
+ \ | default('?', true) }}\n\u2022 Temps: bed {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}\xB0C \xB7\
+ \ hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp')\
+ \ | default('?', true) }}\xB0C\n\u2022 Flow: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_flow_rate') }} \xB7 Runout est.: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_estimated_runout') }}\n\u2022 Registered: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'registered') | default('?', true) }} \xB7 Location: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'location') | default('?', true) }} \xB7 Price: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['',\
+ \ 'unknown', 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022\
+ \ No spool with stock matches this color{% endif %}"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ - type: custom:mushroom-template-card
+ entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+ name: Slot 4
+ icon: mdi:spool
+ icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')
+ | replace(''#'', '''') | lower %}{% if c | length == 6 %}#{{ c }}{% else
+ %}var(--primary-color){% endif %}'
+ picture: '{% set color = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')
+ | replace(''#'', '''') | lower %}{% set ns = namespace(id='''') %}{% for
+ e in integration_entities(''spoolman'') %}{% if e.endswith(''_color_hex'')
+ and (states(e) | replace(''#'', '''') | lower) == color and (state_attr(e[:-10],
+ ''location'') | default('''', true) | lower) == ''cfs lite'' %}{% set b
+ = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '''' %}{% set
+ ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{ state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') if ns.id and state_attr(''sensor.spoolman_spool_''
+ ~ ns.id, ''entity_picture'') else '''' }}'
+ primary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id\
+ \ }} \xB7 {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name')\
+ \ | default('?', true) }} \xB7 {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable']\
+ \ %}Slot color unavailable{% else %}No spool with stock matches this color{%\
+ \ endif %}"
+ secondary: "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+ \ | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in\
+ \ integration_entities('spoolman') %}{% if e.endswith('_color_hex') and\
+ \ (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10],\
+ \ 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10]\
+ \ %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b\
+ \ ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}\u2022 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_vendor_name') | default('?', true) }} \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_material') | default('?', true) }} \xB7 #{{ color |\
+ \ upper }}\n\u2022 Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id)\
+ \ | float(0)) | round(1) }} g \xB7 used {{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n\u2022 Remaining\
+ \ length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length')\
+ \ | float(0)) / 1000) | round(1) }} m \xB7 used {{ ((state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n\u2022 Spool:\
+ \ \xD8{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter')\
+ \ | default('?', true) }} mm \xB7 {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_density') | default('?', true) }} g/cm\xB3 \xB7 {{\
+ \ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?',\
+ \ true) }} g \xB7 art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number')\
+ \ | default('?', true) }}\n\u2022 Temps: bed {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}\xB0C \xB7\
+ \ hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp')\
+ \ | default('?', true) }}\xB0C\n\u2022 Flow: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_flow_rate') }} \xB7 Runout est.: {{ states('sensor.spoolman_spool_'\
+ \ ~ ns.id ~ '_estimated_runout') }}\n\u2022 Registered: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'registered') | default('?', true) }} \xB7 Location: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'location') | default('?', true) }} \xB7 Price: {{ state_attr('sensor.spoolman_spool_'\
+ \ ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['',\
+ \ 'unknown', 'unavailable'] %}\u2022 Slot color unavailable{% else %}\u2022\
+ \ No spool with stock matches this color{% endif %}"
+ multiline_secondary: true
+ grid_options:
+ columns: full
+ - type: grid
+ cards:
+ - type: heading
+ heading: Adjust Remaining
+ icon: mdi:pencil-outline
+ - type: entities
+ title: Set value (g)
+ show_header_toggle: false
+ entities:
+ - input_number.spoolman_set_remaining
+ grid_options:
+ columns: full
+ - type: tile
+ entity: input_number.spoolman_set_remaining
+ name: Apply to Slot 1
+ icon: mdi:content-save-outline
+ grid_options:
+ columns: 3
+ tap_action:
+ action: perform-action
+ perform_action: script.spoolman_set_spool_remaining
+ data:
+ slot: 1
+ confirmation:
+ text: Overwrite remaining weight of the spool matching Slot 1 (by color
+ hex) in Spoolman?
+ - type: tile
+ entity: input_number.spoolman_set_remaining
+ name: Apply to Slot 2
+ icon: mdi:content-save-outline
+ grid_options:
+ columns: 3
+ tap_action:
+ action: perform-action
+ perform_action: script.spoolman_set_spool_remaining
+ data:
+ slot: 2
+ confirmation:
+ text: Overwrite remaining weight of the spool matching Slot 2 (by color
+ hex) in Spoolman?
+ - type: tile
+ entity: input_number.spoolman_set_remaining
+ name: Apply to Slot 3
+ icon: mdi:content-save-outline
+ grid_options:
+ columns: 3
+ tap_action:
+ action: perform-action
+ perform_action: script.spoolman_set_spool_remaining
+ data:
+ slot: 3
+ confirmation:
+ text: Overwrite remaining weight of the spool matching Slot 3 (by color
+ hex) in Spoolman?
+ - type: tile
+ entity: input_number.spoolman_set_remaining
+ name: Apply to Slot 4
+ icon: mdi:content-save-outline
+ grid_options:
+ columns: 3
+ tap_action:
+ action: perform-action
+ perform_action: script.spoolman_set_spool_remaining
+ data:
+ slot: 4
+ confirmation:
+ text: Overwrite remaining weight of the spool matching Slot 4 (by color
+ hex) in Spoolman?
+ - type: markdown
+ content: "**1.** Type the new remaining grams above. **2.** Tap **Apply to\
+ \ Slot N** for the slot holding that roll \u2014 it resolves the spool by\
+ \ the slot's color hex, so it also works when the spool is exhausted (e.g.\
+ \ right after replacing a roll). **3.** The value is **absolute** \u2014\
+ \ it replaces Spoolman's remaining weight; print deductions continue from\
+ \ there. Avoid adjusting during a running print."
+ grid_options:
+ columns: full
+ - type: grid
+ cards:
+ - type: heading
+ heading: Print Linkage
+ icon: mdi:printer-3d-nozzle
+ - type: tile
+ entity: automation.sparkx_i7_latch_print_spool_for_spoolman
+ name: Latch + Segment Deduction
+ icon: mdi:link-variant
+ grid_options:
+ columns: 3
+ - type: tile
+ entity: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+ name: Print Complete Deduction
+ icon: mdi:minus-circle-outline
+ grid_options:
+ columns: 3
+ - type: tile
+ entity: sensor.sparkx_i7_filament_weight_estimated
+ name: Current Job Weight (est.)
+ icon: mdi:weight-gram
+ grid_options:
+ columns: 3
+ - type: tile
+ entity: input_number.sparkx_i7_filament_g_cm
+ name: Filament g/cm
+ icon: mdi:ruler
+ grid_options:
+ columns: 3
+ - type: tile
+ entity: sensor.sparkx_i7_active_filament_slot
+ name: Active CFS Slot
+ icon: mdi:palette-swatch-variant
+ grid_options:
+ columns: 3
+ - type: tile
+ entity: sensor.sparkx_i7_used_material_length
+ name: Used Material Total (cm)
+ icon: mdi:plus-minus
+ grid_options:
+ columns: 6
+ rows: 1
+ - type: grid
+ cards:
+ - type: heading
+ heading: "Spool History \u2014 CFS Lite (auto)"
+ icon: mdi:history
+ - type: custom:auto-entities
+ filter:
+ include:
+ - entity_id: sensor.spoolman_spool_*
+ attributes:
+ location: CFS Lite
+ sort:
+ method: attribute
+ attribute: id
+ numeric: true
+ card:
+ type: history-graph
+ title: Remaining weight (7 days)
+ hours_to_show: 168
+ show_names: true
+ show_empty: false
+ grid_options:
+ columns: full
+ - type: markdown
+ content: "Every spool with location **CFS Lite** joins this graph automatically\
+ \ \u2014 register a new roll in Spoolman (same color hex, location CFS Lite)\
+ \ and it appears without dashboard edits. History follows the spool entity;\
+ \ a replaced roll keeps its own history under its own spool id."
+ grid_options:
+ columns: full
diff --git a/.ha_mcp/logs/mcp_usage.jsonl b/.ha_mcp/logs/mcp_usage.jsonl
index 1342788c..1b6a7d88 100644
--- a/.ha_mcp/logs/mcp_usage.jsonl
+++ b/.ha_mcp/logs/mcp_usage.jsonl
@@ -4365,3 +4365,5 @@
{"timestamp": "2026-10-11T03:50:50.556393+00:00", "tool_name": "ha_config_set_helper", "parameters": {"helper_type": "input_number", "name": "SparkX i7 Last Job Filament Weight", "helper_id": null, "entry_id": null, "subentry_type": null, "subentry_id": null, "show_advanced_options": false, "icon": "mdi:weight-gram", "area_id": null, "labels": null, "min_value": 0.0, "max_value": 10000.0, "step": 0.1, "unit_of_measurement": "g", "options": null, "initial": null, "mode": "box", "has_date": null, "has_time": null, "restore": null, "duration": null, "monday": null, "tuesday": null, "wednesday": null, "thursday": null, "friday": null, "saturday": null, "sunday": null, "latitude": null, "longitude": null, "radius": null, "passive": null, "user_id": null, "device_trackers": null, "picture": null, "tag_id": null, "description": null, "category": null, "config": null, "wait": true, "action": null, "MandatoryBPS": true, "BestPracticeKey": null}, "execution_time_ms": 66.59555435180664, "success": true, "error_message": null, "response_size_bytes": 51937, "user_context": null}
{"timestamp": "2026-10-11T03:52:10.140061+00:00", "tool_name": "ha_config_get_dashboard", "parameters": {"url_path": "sparkx-i7", "list_only": false, "force_reload": true, "entity_id": null, "card_type": null, "heading": null, "include_config": false, "include_screenshot": false, "view_path": null, "mode": null, "query": null}, "execution_time_ms": 193.38178634643555, "success": true, "error_message": null, "response_size_bytes": 58116, "user_context": null}
{"timestamp": "2026-10-11T03:52:10.823878+00:00", "tool_name": "ha_config_get_automation", "parameters": {"identifier": "automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete"}, "execution_time_ms": 878.4890174865723, "success": true, "error_message": null, "response_size_bytes": 5980, "user_context": null}
+{"timestamp": "2026-10-11T03:52:40.263776+00:00", "tool_name": "ha_config_set_dashboard", "parameters": {"url_path": "sparkx-i7", "config": null, "python_transform": "for c in config['views'][0]['sections'][4]['cards']:\n if c.get('name') == 'Filament Used':\n c['primary'] = \"{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_weight_estimated') | round(1) }} g{% else %}Last job: {{ states('input_number.sparkx_i7_last_job_filament_weight') | round(1) }} g{% endif %}\"\n elif c.get('name') == 'Job Cost (total)':\n c['entity'] = 'input_number.sparkx_i7_last_job_cost'\n c['multiline_secondary'] = True\n c['primary'] = \"{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_cost') | round(2) }} ${% else %}{{ states('input_number.sparkx_i7_last_job_cost') | round(2) }} ${% endif %}\"\n c['secondary'] = \"{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}this job (live){% else %}last job{% endif %}\"\n c['type'] = 'custom:mushroom-template-card'", "config_hash": "b19b095defd4f5fe", "title": null, "icon": null, "require_admin": null, "show_in_sidebar": null, "MandatoryBPS": true, "BestPracticeKey": null, "return_screenshot": false, "view_path": null, "patch": null}, "execution_time_ms": 133.79645347595215, "success": true, "error_message": null, "response_size_bytes": 33779, "user_context": null}
+{"timestamp": "2026-10-11T03:52:41.864447+00:00", "tool_name": "ha_config_set_automation", "parameters": {"config": null, "identifier": "automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete", "python_transform": "idx = None\nfor i, a in enumerate(config.get('actions', [])):\n if a.get('action') == 'input_number.set_value' and a.get('target', {}).get('entity_id') == 'input_number.sparkx_i7_spoolman_length_checkpoint':\n idx = i\n break\nif idx is not None:\n config['actions'].insert(idx, {\"action\": \"input_number.set_value\", \"target\": {\"entity_id\": \"input_number.sparkx_i7_last_job_cost\"}, \"data\": {\"value\": \"{{ ((final_grams | float) * (states('input_number.filament_price_per_kg') | float(25)) / 1000) | round(2) }}\"}})\n config['actions'].insert(idx, {\"action\": \"input_number.set_value\", \"target\": {\"entity_id\": \"input_number.sparkx_i7_last_job_filament_weight\"}, \"data\": {\"value\": \"{{ final_grams }}\"}})", "config_hash": "5f9e3b69007edc22", "take_control_of_blueprint": false, "category": null, "wait": true, "enabled": null, "run_actions": false, "MandatoryBPS": true, "BestPracticeKey": null}, "execution_time_ms": 2014.4972801208496, "success": true, "error_message": null, "response_size_bytes": 80509, "user_context": null}
diff --git a/.storage/lovelace.sparkx_i7 b/.storage/lovelace.sparkx_i7
index 0c8a55ca..a98bd948 100644
--- a/.storage/lovelace.sparkx_i7
+++ b/.storage/lovelace.sparkx_i7
@@ -555,7 +555,7 @@
"icon": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}mdi:printer-3d-nozzle{% else %}mdi:calendar-today{% endif %}",
"multiline_secondary": true,
"name": "Filament Used",
- "primary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_weight_estimated') | round(1) }} g{% else %}No active job{% endif %}",
+ "primary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_weight_estimated') | round(1) }} g{% else %}Last job: {{ states('input_number.sparkx_i7_last_job_filament_weight') | round(1) }} g{% endif %}",
"secondary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_used_material_length') | round(0) }} cm this job{% else %}{{ states('sensor.sparkx_i7_filament_weight_daily') | round(1) }} g ยท {{ states('sensor.sparkx_i7_filament_cost_daily') | round(2) }} $ today{% endif %}",
"type": "custom:mushroom-template-card"
},
@@ -581,13 +581,16 @@
"type": "custom:mushroom-template-card"
},
{
- "entity": "sensor.sparkx_i7_filament_cost",
+ "entity": "input_number.sparkx_i7_last_job_cost",
"grid_options": {
"columns": 3
},
"icon": "mdi:cash",
"name": "Job Cost (total)",
- "type": "tile"
+ "type": "custom:mushroom-template-card",
+ "multiline_secondary": true,
+ "primary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_cost') | round(2) }} ${% else %}{{ states('input_number.sparkx_i7_last_job_cost') | round(2) }} ${% endif %}",
+ "secondary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}this job (live){% else %}last job{% endif %}"
},
{
"entity": "sensor.sparkx_i7_filament_cost_daily",
diff --git a/automations.yaml b/automations.yaml
index 422b548d..13ccd255 100644
--- a/automations.yaml
+++ b/automations.yaml
@@ -4507,6 +4507,17 @@
message: 'Print complete - Spoolman deducted {{ summary_total }} g
{{ summary_lines }}'
+ - action: input_number.set_value
+ target:
+ entity_id: input_number.sparkx_i7_last_job_filament_weight
+ data:
+ value: '{{ final_grams }}'
+ - action: input_number.set_value
+ target:
+ entity_id: input_number.sparkx_i7_last_job_cost
+ data:
+ value: '{{ ((final_grams | float) * (states(''input_number.filament_price_per_kg'')
+ | float(25)) / 1000) | round(2) }}'
- action: input_number.set_value
target:
entity_id: input_number.sparkx_i7_spoolman_length_checkpoint