francop/HomeAssistantVS
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

187 files

Browse Source
This commit is contained in:
Home Assistant Version Control
2026-10-09 11:57:31 +00:00
parent 28fa34d78a
commit 1e1b12d52b
187 changed files with 40899 additions and 32654 deletions
Download Patch File Download Diff File Expand all files Collapse all files
custom_components/ha_creality_ws/strings.json
+91 -11
View File
@@ -1,5 +1,6 @@
{
"config": {
"flow_title": "{name}",
"step": {
"user": {
"title": "Connect to Creality Printer",
@@ -8,12 +9,14 @@
"host": "IP Address",
"name": "Friendly Name"
}
},
"zeroconf_confirm": {
"title": "Add discovered printer",
"description": "Add the Creality printer {name} at {host}?"
}
},
"error": {
"cannot_connect": "Failed to connect to printer. Ensure IP is correct and printer is ON.",
"not_K": "Connection refused or not a supported Creality K-series printer.",
"already_configured": "This printer is already configured."
"cannot_connect": "Failed to connect to printer. Ensure IP is correct and printer is ON."
},
"abort": {
"already_configured": "Device is already configured",
@@ -34,6 +37,7 @@
"status_starting": "Starting",
"status_paused": "Paused",
"status_finishing": "Finishing",
"status_printing": "Printing",
"body_progress": "{progress}%",
"body_paused": "Paused at {progress}%",
"body_paused_unknown": "Paused",
@@ -48,12 +52,60 @@
"stopped": "{device} stopped at {progress}%",
"completed_detailed": "{device} finished. {filament} consumed.",
"error": "{device} error - {key} [{code}]",
"filament_runout": "{device} filament ran out. Print is {state}. Change the filament.",
"finishing_soon": "{device} will finish in {minutes} minutes."
"filament_runout": "{device} filament ran out. Print status: {state}. Change the filament.",
"finishing_soon": "{device} will finish in {minutes} min.",
"cfs_info_title": "CFS information request",
"cfs_info_failed": "Could not reach {printers}.",
"cfs_material_failed_title": "CFS material not changed",
"cfs_material_failed": "{printer} is not connected, so box {box} slot {slot} was not changed.",
"diagnostic_title": "Creality diagnostic data",
"diagnostic_collected": "Diagnostic data was collected (printers: {printers}). It is in this action's response and in the Home Assistant log."
},
"exceptions": {
"unsupported_ha_version": {
"message": "This version of the Creality WebSocket integration needs Home Assistant {minimum} or newer, but this system is running {running}. Update Home Assistant, or install integration version 0.9.7 instead."
},
"cfs_material_write_failed": {
"message": "The CFS material was not changed on {printers}: the printer is not connected."
},
"cfs_material_needs_device": {
"message": "Choose the printer to change. This action only writes to the printers you select, never to all of them."
},
"no_printer_matched": {
"message": "None of the selected devices is a Creality printer set up in this integration."
},
"cfs_material_printer_busy": {
"message": "{printer} is in the middle of a print, so its CFS material was not changed. Try again once the print is over."
},
"material_type_empty": {
"message": "The material type must not be empty."
},
"material_not_a_number": {
"message": "{field} must be a number, not {value}."
},
"material_temp_order": {
"message": "The maximum temperature ({high}) must not be below the minimum temperature ({low})."
},
"material_pressure_range": {
"message": "The pressure advance must be between 0 and 1, not {value}."
},
"material_colour_list": {
"message": "The colour must be a hex value such as #ff8800, not a list of RGB values."
},
"material_colour_multi": {
"message": "{value} holds several colours, and a slot can only store one."
},
"material_colour_invalid": {
"message": "The colour must be six hex digits such as #ff8800, not {value}."
},
"printer_not_connected": {
"message": "The printer is not connected, so the command was not sent. Check that it is switched on and reachable, then try again."
}
},
"issues": {
"missing_power_switch": {
"title": "Power switch for {printer} not found",
"description": "The power switch set for {printer}, `{entity_id}`, does not exist, so it was renamed or removed. The printer is connected to as if no power switch were set. To use one again, choose it under Settings > Devices & services > Creality WebSocket Integration > Configure > Power switch."
}
},
"selector": {
@@ -173,7 +225,9 @@
},
"error": {
"invalid_camera_url": "Enter a full URL including the scheme, e.g. http://192.168.1.50:8080/?action=stream or rtsp://192.168.1.50:554/stream.",
"unknown_placeholder": "That is not a placeholder this integration can fill. Check the list in the description above, and mind the spelling."
"unknown_placeholder": "That is not a placeholder this integration can fill. Check the list in the description above, and mind the spelling.",
"cannot_connect": "Failed to connect to the printer at this address. Check the IP address and that the printer is switched on.",
"host_in_use": "Another printer in this integration is already set up at this address."
}
},
"entity": {
@@ -189,6 +243,7 @@
"position_z": { "name": "Position Z" },
"feedrate_pct": { "name": "Print Speed" },
"flowrate_pct": { "name": "Flow Rate" },
"real_time_speed": { "name": "Real-Time Speed" },
"model_info": { "name": "Model" },
"filament_status": {
"name": "Filament Status",
@@ -220,7 +275,10 @@
"print_job_time": { "name": "Print Job Time" },
"print_left_time": { "name": "Print Time Left" },
"real_time_flow": { "name": "Real-Time Flow" },
"current_object": { "name": "Current Object" },
"current_object": {
"name": "Current Object",
"state": { "not_printing": "Not printing" }
},
"object_count": { "name": "Object Count" },
"print_control": {
"name": "Print Control",
@@ -233,7 +291,28 @@
"max_nozzle_temp": { "name": "Max Nozzle Temperature" },
"max_bed_temp": { "name": "Max Bed Temperature" },
"max_chamber_temp": { "name": "Max Chamber Temperature" },
"active_filament_slot": { "name": "Active Filament Slot" },
"active_filament_slot": {
"name": "Active Filament Slot",
"state": {
"external": "External",
"box_1_slot_1": "Box 1 Slot 1",
"box_1_slot_2": "Box 1 Slot 2",
"box_1_slot_3": "Box 1 Slot 3",
"box_1_slot_4": "Box 1 Slot 4",
"box_2_slot_1": "Box 2 Slot 1",
"box_2_slot_2": "Box 2 Slot 2",
"box_2_slot_3": "Box 2 Slot 3",
"box_2_slot_4": "Box 2 Slot 4",
"box_3_slot_1": "Box 3 Slot 1",
"box_3_slot_2": "Box 3 Slot 2",
"box_3_slot_3": "Box 3 Slot 3",
"box_3_slot_4": "Box 3 Slot 4",
"box_4_slot_1": "Box 4 Slot 1",
"box_4_slot_2": "Box 4 Slot 2",
"box_4_slot_3": "Box 4 Slot 3",
"box_4_slot_4": "Box 4 Slot 4"
}
},
"cfs_box_temp": { "name": "CFS Box {box_id} Temperature" },
"cfs_box_humidity": { "name": "CFS Box {box_id} Humidity" },
"cfs_slot_filament": { "name": "CFS Box {box_id} Slot {slot} Filament" },
@@ -251,7 +330,8 @@
"reconnect": { "name": "Reconnect" }
},
"number": {
"print_tuning_pct": { "name": "Print Tuning" },
"print_tuning_pct": { "name": "Speed Factor" },
"flow_rate_pct": { "name": "Flow Factor" },
"nozzle_target": { "name": "Nozzle Target" },
"bed_target": { "name": "Bed Target" },
"chamber_target": { "name": "Chamber Target" }
@@ -274,11 +354,11 @@
"services": {
"diagnostic_dump": {
"name": "Diagnostic Dump",
"description": "Dump all WebSocket telemetry data from connected Creality printers to JSON format for troubleshooting and analysis.",
"description": "Collect diagnostics for every Creality printer and return them as the response, for troubleshooting. Also written to the log.",
"fields": {
"include_sensitive_data": {
"name": "Include Sensitive Data",
"description": "Whether to include potentially sensitive data in the diagnostic output (currently unused, reserved for future use)"
"description": "Show printer addresses and network names, notify targets and access tokens instead of hiding them. Leave this off for anything you share publicly."
}
}
},