diff --git a/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_210106.yaml b/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_210106.yaml new file mode 100644 index 00000000..db5b0b55 --- /dev/null +++ b/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_210106.yaml @@ -0,0 +1,421 @@ +# ha_mcp_backup +schema_version: 1 +domain: dashboard +entity_id: 3d-printer-cellphone +captured: '2026-10-15T21:01:06.734288+00:00' +tool: ha_config_set_dashboard +config: + views: + - sections: + - cards: + - card: + columns: 4 + square: false + type: grid + card_param: cards + filter: + template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\ + \ %}\n {% set sp = namespace(ent='') %}\n {% for s in states.sensor\ + \ %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\ + \ %}\n {% set loc = (s.attributes.location | default('')) | lower\ + \ %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent =\ + \ s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n\ + \ {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\ + \ wrap='') %}\n {% if sp.ent != '' %}\n {% set hex = state_attr(sp.ent,\ + \ 'filament_color_hex') | default('44739e') %}\n {% set hex_clean =\ + \ hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent,\ + \ 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1)\ + \ %}\n {% set total = state_attr(sp.ent, 'filament_weight') | float(1000)\ + \ %}\n {% set raw_pct = ((remain / total) * 100) | round(1) if total\ + \ > 0 else 0 %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct\ + \ > 100 else raw_pct) %}\n {% set rem_n = states(sp.ent) | float(-1)\ + \ %}\n {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n\ + \ >= 0 and rem_n < 100) else 0) %}\n {% set v.wrap = ' warn-crit' if\ + \ band == 2 else (' warn-low' if band == 1 else '') %}\n {% set v.border\ + \ = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent'\ + \ %}\n {% set v.html = \"
\" ~ remain ~ \"g
\" %}\n \ + \ {% set v.label = 'Slot ' ~ n ~ (' \u26A0' if band > 0 else '') %}\n\ + \ {% else %}\n {% set v.html = \"
\"\ + \ %}\n {% set v.label = \"Slot \" ~ n ~ \"\ + \ \u2014 empty\" %}\n {% endif %}\n {% set card = {\n \"type\"\ + : \"custom:button-card\",\n \"entity\": sp.ent if sp.ent != '' else\ + \ 'sensor.sparkx_i7_active_filament_slot',\n \"show_icon\": false,\n\ + \ \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\"\ + : {\n \"tube\": \"
\" ~ v.html\ + \ ~ \"
\" ~ v.label ~ \"
\"\n },\n\ + \ \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"\ + },\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"\ + },\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"\ + },\n {\"flex-direction\": \"column\"},\n {\"align-items\"\ + : \"center\"}\n ],\n \"custom_fields\": {\n \"tube\"\ + : [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"\ + },\n {\"flex-direction\": \"column\"},\n {\"align-items\"\ + : \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n\ + \ .tube-wrap {\n display: flex;\n flex-direction: column;\n\ + \ align-items: center;\n width: 100%;\n }\n .tube-bg\ + \ {\n position: relative;\n width: 60px;\n height:\ + \ 180px;\n background-color: #dedede;\n border-radius: 20px;\n\ + \ overflow: hidden;\n border: 1px solid \" ~ v.border ~\ + \ \";\n display: flex;\n flex-direction: column;\n \ + \ justify-content: flex-end;\n }\n .tube-empty {\n \ + \ background: transparent;\n border: 2px dashed var(--error-color);\n\ + \ }\n .tube-fill {\n width: 100%;\n border-radius:\ + \ 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n\ + \ top: 48%;\n left: 50%;\n transform: translate(-50%,\ + \ -50%);\n font-size: 13px;\n font-weight: 800;\n \ + \ color: #111111;\n pointer-events: none;\n z-index: 2;\n\ + \ white-space: nowrap;\n }\n .slot-label {\n margin-top:\ + \ 8px;\n font-size: 12px;\n font-weight: 700;\n letter-spacing:\ + \ 0.3px;\n color: var(--secondary-text-color);\n }\n \ + \ .slot-warn {\n color: var(--error-color);\n }\n .warn-low\ + \ .tube-bg {\n background-color: #fff6df;\n outline: 2px\ + \ solid var(--warning-color);\n }\n .warn-low .slot-label {\n\ + \ color: var(--warning-color);\n }\n .warn-crit .tube-bg\ + \ {\n background-color: #fdecea;\n outline: 2px solid var(--error-color);\n\ + \ }\n .warn-crit .slot-label {\n color: var(--error-color);\n\ + \ }\n \",\n \"tap_action\": {\n \"action\": \"more-info\"\ + \ if sp.ent != '' else \"none\"\n }\n } %}\n\n {% set ns.cards =\ + \ ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n" + type: custom:auto-entities + - entity: sensor.sparkx_i7_cfs_box_1_humidity + grid_options: + columns: 6 + icon: mdi:water-percent + name: Humidity + type: tile + - entity: sensor.sparkx_i7_cfs_box_1_temperature + grid_options: + columns: 6 + icon: mdi:thermometer + name: Temperature + type: tile + - cards: + - entity: sensor.sparkx_i7_active_filament_slot + grid_options: + columns: full + icon: mdi:magnet + icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'') + %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace('' + '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length + == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}' + multiline_secondary: true + name: Next Deduction Match + primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}' + secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\ + \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\ + \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\ + \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\ + \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\ + \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\ + \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\ + \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\ + \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\ + \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\ + \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\ + \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\ + \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\ + \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\ + \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\ + \ %}\n" + type: custom:mushroom-template-card + grid_options: + columns: full + type: horizontal-stack + - heading: Last/Current Print Job + heading_style: title + icon: mdi:printer-3d + type: heading + - entity: sensor.sparkx_i7_used_material_length + grid_options: + columns: 6 + rows: 1 + icon: mdi:plus-minus + name: Used Material Total + type: tile + - entity: sensor.sparkx_moonraker_print_eta + features_position: bottom + grid_options: + columns: 6 + rows: 1 + name: Print ETA + type: tile + vertical: false + - entity: sensor.sparkx_i7_filament_weight_estimated + grid_options: + columns: 6 + rows: auto + icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\ + \ ['printing', 'paused'] %}\n mdi:printer-3d-nozzle\n{% else %}\n mdi:cash-multiple\n\ + {% endif %}" + icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\ + \ st in ['printing', 'paused'] %}\n blue\n{% else %}\n green\n{% endif\ + \ %}" + multiline_secondary: true + primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\ + \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\ + \ ['printing', 'paused'] %}\n {% if is_number(w) %}{{ w | float | round(1)\ + \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\ + \ | float(0) | round(1) }} g\n{% endif %}\n" + secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\ + \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\ + \ 'paused'] %}\n {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\ + \ else %}cost unavailable{% endif %}\n{% else %}\n {{ states('input_number.sparkx_i7_last_job_cost')\ + \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n" + type: custom:mushroom-template-card + - entity: sensor.sparkx_i7_expected_material_length + grid_options: + columns: 6 + rows: auto + icon: mdi:scale-balance + icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %} + + {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0) + %} + + {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0) + %} + + {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %} + + {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0)) + * gcm) | round(1) %} + + {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %} + + {% set gc = namespace(list=[]) %} + + {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'') + | default('''', true) | string).split('';'') %} + + {% set q = p | replace(''#'','''') | lower | trim %} + + {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list + = gc.list + [q] %}{% endif %} + + {% endfor %} + + {% set single = (gc.list | length) == 1 %} + + {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''', + true) | string).split(''_'')[-1] %} + + {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %} + + {% set s = namespace(short=false, ok=false, matched=0, active=false) %} + + {% for n in [''1'',''2'',''3'',''4''] %} + + {% set sp = namespace(id='''', rem=-1) %} + + {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'') + %} + + {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''', + true) | lower) == (''cfs lite '' ~ n) %} + + {% set sp.id = e[:-10] %} + + {% set sp.rem = states(e[:-10]) | float(-1) %} + + {% endif %} + + {% endfor %} + + {% if sp.id != '''' and sp.rem >= 0 %} + + {% set s.matched = s.matched + 1 %} + + {% if single %} + + {% if n == aslot %} + + {% set s.active = true %} + + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true + %}{% endif %} + + {% endif %} + + {% else %} + + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true + %}{% endif %} + + {% endif %} + + {% endif %} + + {% endfor %} + + {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''', + true)) in [''printing'',''paused''] %} + + {% set v = namespace(state=''unknown'', label=''check unavailable'') %} + + {% if not active %} + + {% set v.state = ''idle'' %} + + {% set v.label = ''no active print'' %} + + {% elif job_g <= 0 %} + + {% set v.state = ''none'' %} + + {% set v.label = ''no slicer estimate yet'' %} + + {% elif s.short %} + + {% set v.state = ''short'' %} + + {% set v.label = ''NOT ENOUGH'' %} + + {% elif s.ok %} + + {% set v.state = ''ok'' %} + + {% set v.label = ''enough'' %} + + {% elif single and aslot == '''' %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''no active CFS slot'' %} + + {% elif single and not s.active %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''active slot has no spool'' %} + + {% elif s.matched == 0 %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''no spool loaded'' %} + + {% endif %} + + {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif + v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}' + multiline_secondary: true + name: Filament Sufficiency + primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\ + \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\ + \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\ + \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\ + \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\ + \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\ + \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\ + \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\ + \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\ + \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\ + \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\ + \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\ + \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\ + \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\ + {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\ + \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\ + \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\ + \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\ + \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\ + \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\ + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\ + \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\ + \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\ + \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\ + \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\ + \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\ + \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\ + \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\ + \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\ + \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\ + \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\ + \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\ + \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\ + \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\ + \ endif %}" + secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\ + \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\ + \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\ + \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\ + \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\ + \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\ + \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\ + \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\ + \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\ + \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\ + \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\ + \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\ + \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\ + \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\ + {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\ + \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\ + \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\ + \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\ + \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\ + \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\ + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\ + \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\ + \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\ + \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\ + \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\ + \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\ + \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\ + \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\ + \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\ + \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\ + \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\ + \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\ + \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\ + \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\ + \ \xB7 {{ v.label }}{% endif %}" + type: custom:mushroom-template-card + - heading: Temperature + heading_style: title + icon: mdi:coolant-temperature + type: heading + - entity: sensor.sparkx_i7_nozzle_temperature + grid_options: + columns: 4 + max: 300 + min: 0 + name: Nozzle + severity: + green: 0 + red: 240 + yellow: 180 + type: gauge + unit: "\xB0C" + - entity: sensor.sparkx_i7_bed_temperature + grid_options: + columns: 4 + max: 100 + min: 0 + name: Bed + severity: + green: 0 + red: 100 + yellow: 60 + type: gauge + unit: "\xB0C" + - entity: sensor.sparkx_i7_real_time_flow + grid_options: + columns: 4 + max: 40 + min: 0 + name: Flow + severity: + green: 0 + red: 24 + yellow: 12 + type: gauge + type: grid + type: sections diff --git a/.ha_mcp/logs/mcp_usage.jsonl b/.ha_mcp/logs/mcp_usage.jsonl index 9cfdb192..038797a9 100644 --- a/.ha_mcp/logs/mcp_usage.jsonl +++ b/.ha_mcp/logs/mcp_usage.jsonl @@ -4687,3 +4687,4 @@ {"timestamp": "2026-10-15T20:58:06.030962+00:00", "tool_name": "ha_config_get_dashboard", "parameters": {"url_path": "3d-printer-cellphone", "list_only": false, "force_reload": false, "entity_id": null, "card_type": null, "heading": null, "include_config": false, "include_screenshot": false, "view_path": null, "query": "filament_color_hex", "describe": false}, "execution_time_ms": 18.613100051879883, "success": true, "error_message": null, "response_size_bytes": 5272, "user_context": null} {"timestamp": "2026-10-15T20:58:06.035869+00:00", "tool_name": "ha_config_get_dashboard", "parameters": {"url_path": "3d-printer-cellphone", "list_only": false, "force_reload": false, "entity_id": null, "card_type": null, "heading": null, "include_config": false, "include_screenshot": false, "view_path": null, "query": "tube", "describe": false}, "execution_time_ms": 19.455671310424805, "success": true, "error_message": null, "response_size_bytes": 5258, "user_context": null} {"timestamp": "2026-10-15T20:59:06.439869+00:00", "tool_name": "ha_eval_template", "parameters": {"template": "{% set out = namespace(l=[]) %}\n{% for n in [1,2,3,4] %}\n{% set ent = 'sensor.spoolman_spool_' ~ [9,4,5,8][n-1] %}\n{% set hex = state_attr(ent, 'filament_color_hex') | default('44739e') %}\n{% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n{% set remain = (state_attr(ent, 'remaining_weight') | default(states(ent)) | float(0)) %}\n{% set total = state_attr(ent, 'filament_weight') | float(1000) %}\n{% set raw_pct = ((remain / total) * 100) if total > 0 else 0 %}\n{% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n{% set tr = hex_clean[1:3] | int(0, 16) %}\n{% set tg = hex_clean[3:5] | int(0, 16) %}\n{% set tb = hex_clean[5:7] | int(0, 16) %}\n{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}\n{% set text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}\n{% set halo = 'rgba(0,0,0,0.9)' if text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\n{% set out.l = out.l + ['slot' ~ n ~ ' hex=' ~ hex_clean ~ ' pct=' ~ pct ~ ' lum=' ~ lum ~ ' -> ' ~ text ~ ' halo=' ~ halo] %}\n{% endfor %}\n{{ out.l | join(' | ') }}", "condition": null, "variables": null, "strict": false, "timeout": 3, "report_errors": true}, "execution_time_ms": 186.7539882659912, "success": true, "error_message": null, "response_size_bytes": 1656, "user_context": null} +{"timestamp": "2026-10-15T21:01:12.967494+00:00", "tool_name": "ha_config_set_dashboard", "parameters": {"url_path": "3d-printer-cellphone", "config": null, "python_transform": "config['views'][0]['sections'][0]['cards'][0]['filter']['template'] = config['views'][0]['sections'][0]['cards'][0]['filter']['template'].replace(\"transparent', wrap='')\", \"transparent', wrap='', text='#111111', halo='rgba(255,255,255,0.95)')\").replace(\"{% set rem_n = states(sp.ent) | float(-1) %}\", \"{% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3] | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb = hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\").replace(\"color: #111111;\", 'color: ' + '\\x22' + ' ~ v.text ~ ' + '\\x22' + '; text-shadow: 0 0 3px ' + '\\x22' + ' ~ v.halo ~ ' + '\\x22' + ', 0 0 6px ' + '\\x22' + ' ~ v.halo ~ ' + '\\x22' + ';')", "config_hash": "9215ea48196d6a51", "title": null, "icon": null, "require_admin": null, "show_in_sidebar": null, "MandatoryBPS": true, "BestPracticeKey": null, "return_screenshot": false, "view_path": null, "patch": null}, "execution_time_ms": 6101.857423782349, "success": true, "error_message": null, "response_size_bytes": 32494, "user_context": null} diff --git a/.storage/lovelace.3d_printer_cellphone b/.storage/lovelace.3d_printer_cellphone index 5dd6c023..1af545ac 100644 --- a/.storage/lovelace.3d_printer_cellphone +++ b/.storage/lovelace.3d_printer_cellphone @@ -17,7 +17,7 @@ }, "card_param": "cards", "filter": { - "template": "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4] %}\n {% set sp = namespace(ent='') %}\n {% for s in states.sensor %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_') %}\n {% set loc = (s.attributes.location | default('')) | lower %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent = s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n {% set v = namespace(html='', label='Slot ' ~ n, border='transparent', wrap='') %}\n {% if sp.ent != '' %}\n {% set hex = state_attr(sp.ent, 'filament_color_hex') | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent, 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1) %}\n {% set total = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n {% set raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n {% set rem_n = states(sp.ent) | float(-1) %}\n {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band == 1 else '') %}\n {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n {% set v.html = \"
\" ~ remain ~ \"g
\" %}\n {% set v.label = 'Slot ' ~ n ~ (' ⚠' if band > 0 else '') %}\n {% else %}\n {% set v.html = \"
\" %}\n {% set v.label = \"Slot \" ~ n ~ \" — empty\" %}\n {% endif %}\n {% set card = {\n \"type\": \"custom:button-card\",\n \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n \"show_icon\": false,\n \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ v.html ~ \"
\" ~ v.label ~ \"
\"\n },\n \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"},\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ],\n \"custom_fields\": {\n \"tube\": [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n .tube-wrap {\n display: flex;\n flex-direction: column;\n align-items: center;\n width: 100%;\n }\n .tube-bg {\n position: relative;\n width: 60px;\n height: 180px;\n background-color: #dedede;\n border-radius: 20px;\n overflow: hidden;\n border: 1px solid \" ~ v.border ~ \";\n display: flex;\n flex-direction: column;\n justify-content: flex-end;\n }\n .tube-empty {\n background: transparent;\n border: 2px dashed var(--error-color);\n }\n .tube-fill {\n width: 100%;\n border-radius: 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n top: 48%;\n left: 50%;\n transform: translate(-50%, -50%);\n font-size: 13px;\n font-weight: 800;\n color: #111111;\n pointer-events: none;\n z-index: 2;\n white-space: nowrap;\n }\n .slot-label {\n margin-top: 8px;\n font-size: 12px;\n font-weight: 700;\n letter-spacing: 0.3px;\n color: var(--secondary-text-color);\n }\n .slot-warn {\n color: var(--error-color);\n }\n .warn-low .tube-bg {\n background-color: #fff6df;\n outline: 2px solid var(--warning-color);\n }\n .warn-low .slot-label {\n color: var(--warning-color);\n }\n .warn-crit .tube-bg {\n background-color: #fdecea;\n outline: 2px solid var(--error-color);\n }\n .warn-crit .slot-label {\n color: var(--error-color);\n }\n \",\n \"tap_action\": {\n \"action\": \"more-info\" if sp.ent != '' else \"none\"\n }\n } %}\n\n {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n" + "template": "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4] %}\n {% set sp = namespace(ent='') %}\n {% for s in states.sensor %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_') %}\n {% set loc = (s.attributes.location | default('')) | lower %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent = s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n {% set v = namespace(html='', label='Slot ' ~ n, border='transparent', wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n {% if sp.ent != '' %}\n {% set hex = state_attr(sp.ent, 'filament_color_hex') | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent, 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1) %}\n {% set total = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n {% set raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3] | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb = hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\n {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band == 1 else '') %}\n {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n {% set v.html = \"
\" ~ remain ~ \"g
\" %}\n {% set v.label = 'Slot ' ~ n ~ (' ⚠' if band > 0 else '') %}\n {% else %}\n {% set v.html = \"
\" %}\n {% set v.label = \"Slot \" ~ n ~ \" — empty\" %}\n {% endif %}\n {% set card = {\n \"type\": \"custom:button-card\",\n \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n \"show_icon\": false,\n \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ v.html ~ \"
\" ~ v.label ~ \"
\"\n },\n \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"},\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ],\n \"custom_fields\": {\n \"tube\": [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n .tube-wrap {\n display: flex;\n flex-direction: column;\n align-items: center;\n width: 100%;\n }\n .tube-bg {\n position: relative;\n width: 60px;\n height: 180px;\n background-color: #dedede;\n border-radius: 20px;\n overflow: hidden;\n border: 1px solid \" ~ v.border ~ \";\n display: flex;\n flex-direction: column;\n justify-content: flex-end;\n }\n .tube-empty {\n background: transparent;\n border: 2px dashed var(--error-color);\n }\n .tube-fill {\n width: 100%;\n border-radius: 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n top: 48%;\n left: 50%;\n transform: translate(-50%, -50%);\n font-size: 13px;\n font-weight: 800;\n color: \" ~ v.text ~ \"; text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo ~ \";\n pointer-events: none;\n z-index: 2;\n white-space: nowrap;\n }\n .slot-label {\n margin-top: 8px;\n font-size: 12px;\n font-weight: 700;\n letter-spacing: 0.3px;\n color: var(--secondary-text-color);\n }\n .slot-warn {\n color: var(--error-color);\n }\n .warn-low .tube-bg {\n background-color: #fff6df;\n outline: 2px solid var(--warning-color);\n }\n .warn-low .slot-label {\n color: var(--warning-color);\n }\n .warn-crit .tube-bg {\n background-color: #fdecea;\n outline: 2px solid var(--error-color);\n }\n .warn-crit .slot-label {\n color: var(--error-color);\n }\n \",\n \"tap_action\": {\n \"action\": \"more-info\" if sp.ent != '' else \"none\"\n }\n } %}\n\n {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n" }, "type": "custom:auto-entities" },