diff --git a/automations.yaml b/automations.yaml
index a3d99adc..c5fc758f 100644
--- a/automations.yaml
+++ b/automations.yaml
@@ -3540,67 +3540,71 @@
   mode: single
 - id: '1787462157568'
   alias: 3D Print Early Layers Snapshot
-  description: Sends a SparkX i7 camera snapshot once per print when Z crosses 1.0
-    mm while printing.
+  description: Telegram-only snapshots from all 3 printer cameras. Fires when Z crosses
+    1.0 mm, then again at 25%, 50% and 75% print progress. One set of photos per milestone,
+    sent as a Telegram album.
   triggers:
   - above: 1
     entity_id: sensor.sparkx_i7_position_z
     trigger: numeric_state
+  - above: 25
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 50
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 75
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
   conditions:
   - condition: state
     entity_id: sensor.sparkx_i7_print_status
     state: printing
   actions:
   - variables:
-      early_message: '{% set f = state_attr(''sensor.sparkx_i7_print_status'', ''file'')
-        or '''' %} {% set file = ''No file'' if f in ['''', none, ''unknown'', ''unavailable'']
-        else f.split(''/'')[-1].replace(''.gcode'', '''') %} {% set pct = states(''sensor.sparkx_i7_print_progress'')
-        | int(0) %} {% set elapsed = states(''sensor.sparkx_i7_print_job_time'') |
-        int(0) %} {% set remaining = states(''sensor.sparkx_i7_print_time_left'')
-        | int(0) %} {% set finish = (now() + timedelta(seconds=remaining)).strftime(''%I:%M
-        %p'').lstrip(''0'') if remaining > 0 else ''unknown'' %} {{ file }} Progress:
-        {{ pct }}% · Elapsed: {% if elapsed >= 3600 %}{{ elapsed // 3600 }}h {{ ((elapsed
-        % 3600) // 60) }}m{% else %}{{ ((elapsed % 3600) // 60) }}m{% endif %} · Left:
-        {% if remaining > 0 %}{% if remaining >= 3600 %}{{ remaining // 3600 }}h {{
-        ((remaining % 3600) // 60) }}m{% else %}{{ ((remaining % 3600) // 60) }}m{%
-        endif %}{% else %}unknown{% endif %} Est. finish: {{ finish }}'
-  - action: camera.snapshot
-    data:
-      filename: /config/www/sparkx_i7_early_snapshot.jpg
-    target:
-      entity_id: camera.sparkx_i7_printer_camera
+      message: '{% set file = state_attr(''sensor.sparkx_i7_print_status'', ''file'')
+        or '''' %} {% set name = ''Print'' if file in ['''', none, ''unknown'', ''unavailable'']
+        else file.split(''/'')[-1].replace(''.gcode'', '''') %} {% set pct = states(''sensor.sparkx_i7_print_progress'')
+        | int(0) %} {% set left = states(''sensor.sparkx_i7_print_time_left'') | int(0)
+        %} 3D print · {{ milestone }} · {{ name }} at {{ pct }}%{% if left > 0 %}
+        · {{ (left // 3600) }}h {{ ((left % 3600) // 60) }}m left{% endif %}'
+      milestone: '{% if trigger.entity_id == ''sensor.sparkx_i7_position_z'' %} First
+        layers (Z {{ trigger.to_state.state | float(1) }} mm) {% elif trigger.to_state.state
+        | float(0) >= 75 %} 75% complete {% elif trigger.to_state.state | float(0)
+        >= 50 %} 50% complete {% else %} 25% complete {% endif %}'
+      tag: '{% if trigger.entity_id == ''sensor.sparkx_i7_position_z'' %} z1 {% else
+        %} p{{ trigger.above | int }} {% endif %}'
   - parallel:
-    - action: notify.mobile_app_sm_f956w
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_motorola_one_vision
+        filename: /config/www/sparkx_{{ tag }}.jpg
+      target:
+        entity_id: camera.sparkx_i7_printer_camera
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_francos_ipad
+        filename: /config/www/ender5_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera_duckdns_org
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_sm_t387w
-      data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: telegram_bot.send_photo
-      data:
-        caption: '{{ early_message }}'
-        entity_id: notify.franco
-        file: /config/www/sparkx_i7_early_snapshot.jpg
-        parse_mode: plain_text
-  mode: single
+        filename: /config/www/ender_cam2_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera2_duckdns_org
+  - action: telegram_bot.send_media_group
+    data:
+      caption: '{{ message }}'
+      media:
+      - caption: SparkX i7
+        file: /config/www/sparkx_{{ tag }}.jpg
+      - caption: Ender 5 Pro
+        file: /config/www/ender5_{{ tag }}.jpg
+      - caption: Ender cam 2
+        file: /config/www/ender_cam2_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  max: 4
+  mode: parallel
 - id: '1787530101996'
   alias: 'Alert: Thread node offline'
   description: 'Early warning when a Matter-over-Thread device loses its mesh attachment
diff --git a/zigbee2mqtt/state.json b/zigbee2mqtt/state.json
index e6b20ba0..f832794a 100644
--- a/zigbee2mqtt/state.json
+++ b/zigbee2mqtt/state.json
@@ -4,7 +4,7 @@
         "state": "ON",
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 120.5,
+        "voltage": 120.3,
         "countdown_to_turn_on": 0,
         "ac_frequency": 60,
         "power_factor": 0.14,
@@ -22,15 +22,15 @@
     },
     "0xffffb40e0607af27": {
         "state": "ON",
-        "voltage": 120.3,
+        "voltage": 120.1,
         "ac_frequency": 60,
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "power": 1.9,
+        "power": 2,
         "current": 0.09,
         "energy": 50.9,
-        "power_factor": 0.16,
+        "power_factor": 0.17,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -47,8 +47,8 @@
         "countdown_to_turn_off": 0,
         "voltage": 119.8,
         "countdown_to_turn_on": 0,
-        "energy": 96.36,
-        "power_factor": 0.9,
+        "energy": 96.41,
+        "power_factor": 0.2,
         "ac_frequency": 60,
         "update": {
             "state": "idle",
@@ -58,8 +58,8 @@
             "latest_release_notes": null
         },
         "linkquality": 145,
-        "power": 85.7,
-        "current": 0.81,
+        "power": 0.2,
+        "current": 0.01,
         "power_on_behavior": "on"
     },
     "0xb40e060fffe031e3": {
@@ -74,12 +74,12 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 118.6,
+        "voltage": 118.8,
         "state": "ON",
         "ac_frequency": 60,
-        "energy": 198.81,
-        "power": 3.6,
-        "current": 0.05,
+        "energy": 198.89,
+        "power": 99.4,
+        "current": 0.9,
         "power_factor": 0.94,
         "update": {
             "state": "idle",
@@ -96,12 +96,12 @@
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
         "voltage": 120.1,
-        "energy": 96.06,
+        "energy": 96.07,
         "state": "ON",
-        "power": 13.8,
-        "current": 0.21,
+        "power": 15.8,
+        "current": 0.25,
         "ac_frequency": 60,
-        "power_factor": 0.52,
+        "power_factor": 0.5,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -114,10 +114,10 @@
     },
     "0xffffb40e060895b3": {
         "state": "ON",
-        "voltage": 120.3,
+        "voltage": 120,
         "ac_frequency": 60,
         "energy": 13.31,
-        "current": 0.02,
+        "current": 0.01,
         "power": 0.1,
         "power_factor": 0.11,
         "linkquality": 116,
@@ -136,14 +136,14 @@
     "0xffffb40e0608864e": {
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 120.6,
+        "voltage": 120.4,
         "energy": 31.69,
         "countdown_to_turn_on": 0,
         "state": "ON",
         "current": 0.02,
         "ac_frequency": 60,
         "power": 0.4,
-        "power_factor": 0.19,
+        "power_factor": 0.14,
         "update": {
             "state": "idle",
             "installed_version": 268513381,