diff --git a/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261018_060039.yaml b/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261018_060039.yaml new file mode 100644 index 00000000..6070dfb7 --- /dev/null +++ b/.ha_mcp/backups/dashboard.3d-printer-cellphone.20261018_060039.yaml @@ -0,0 +1,493 @@ +# ha_mcp_backup +schema_version: 1 +domain: dashboard +entity_id: 3d-printer-cellphone +captured: '2026-10-18T06:00:39.967779+00:00' +tool: ha_config_set_dashboard +config: + views: + - sections: + - cards: + - card: + columns: 4 + square: false + type: grid + card_param: cards + filter: + template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\ + \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\ + \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n {% set sp = namespace(ent='')\ + \ %}\n {% for s in states.sensor %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\ + \ %}\n {% set loc = (s.attributes.location | default('')) | lower\ + \ %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent =\ + \ s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n\ + \ {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\ + \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n {% if\ + \ sp.ent != '' %}\n {% set hex = state_attr(sp.ent, 'filament_color_hex')\ + \ | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#')\ + \ else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent, 'remaining_weight')\ + \ | default(states(sp.ent)) | float(0)) | round(1) %}\n {% set total\ + \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n {% set\ + \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\ + \ {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\ + \ %}\n {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\ + \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\ + \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\ + \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\ + \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\ + \ else 'rgba(255,255,255,0.95)' %}\n {% set band = 2 if (rem_n >= 0\ + \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\ + \ {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\ + \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\ + \ else v.wrap %}\n {% set v.border = '#d0d0d0' if hex_clean | lower\ + \ in ['#ffffff', '#fff'] else 'transparent' %}\n {% set v.html = \"\ +
\"\ + \ ~ remain ~ \"g
\" %}\n {% set v.label = 'Slot ' ~ n ~\ + \ (' \u26A0' if band > 0 else '') %}\n {% else %}\n {% set v.html\ + \ = \"
\" %}\n {% set v.label\ + \ = \"Slot \" ~ n ~ \" \u2014 empty\" %}\n\ + \ {% endif %}\n {% set card = {\n \"type\": \"custom:button-card\"\ + ,\n \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\ + \ \"show_icon\": false,\n \"show_state\": false,\n \"show_name\"\ + : false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ v.html ~ \"
\" ~ v.label\ + \ ~ \"
\"\n },\n \"styles\": {\n \"card\": [\n \ + \ {\"background\": \"transparent\"},\n {\"box-shadow\": \"\ + none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px\ + \ 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\"\ + : \"column\"},\n {\"align-items\": \"center\"}\n ],\n \ + \ \"custom_fields\": {\n \"tube\": [\n {\"width\": \"\ + 100%\"},\n {\"display\": \"flex\"},\n {\"flex-direction\"\ + : \"column\"},\n {\"align-items\": \"center\"}\n ]\n \ + \ }\n },\n \"extra_styles\": \"\n .tube-wrap.active .tube-bg\ + \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\ + \ .slot-label { color: var(--primary-color); font-weight: 800; } \ + \ .tube-wrap {\n display: flex;\n flex-direction: column;\n\ + \ align-items: center;\n width: 100%;\n }\n .tube-bg\ + \ {\n position: relative;\n width: 60px;\n height:\ + \ 180px;\n background-color: #dedede;\n border-radius: 20px;\n\ + \ overflow: hidden;\n border: 1px solid \" ~ v.border ~\ + \ \";\n display: flex;\n flex-direction: column;\n \ + \ justify-content: flex-end;\n }\n .tube-empty {\n \ + \ background: transparent;\n border: 2px dashed var(--error-color);\n\ + \ }\n .tube-fill {\n width: 100%;\n border-radius:\ + \ 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n\ + \ top: 48%;\n left: 50%;\n transform: translate(-50%,\ + \ -50%);\n font-size: 13px;\n font-weight: 800;\n \ + \ color: \" ~ v.text ~ \"; text-shadow: 0 0 3px \" ~ v.halo ~\ + \ \", 0 0 6px \" ~ v.halo ~ \";\n pointer-events: none;\n \ + \ z-index: 2;\n white-space: nowrap;\n }\n .slot-label\ + \ {\n margin-top: 8px;\n font-size: 12px;\n font-weight:\ + \ 700;\n letter-spacing: 0.3px;\n color: var(--secondary-text-color);\n\ + \ }\n .slot-warn {\n color: var(--error-color);\n \ + \ }\n .warn-low .tube-bg {\n background-color: #fff6df;\n\ + \ outline: 2px solid var(--warning-color);\n }\n .warn-low\ + \ .slot-label {\n color: var(--warning-color);\n }\n \ + \ .warn-crit .tube-bg {\n background-color: #fdecea;\n outline:\ + \ 2px solid var(--error-color);\n }\n .warn-crit .slot-label\ + \ {\n color: var(--error-color);\n }\n \",\n \"tap_action\"\ + : {\n \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \ + \ }\n } %}\n\n {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\ + {{ ns.cards }}\n" + type: custom:auto-entities + - type: horizontal-stack + grid_options: + columns: full + cards: + - type: markdown + content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'', + ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'') + | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'') + | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'') + | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if + states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1'' + else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'') + | float(0)) | round(1) }}g{% endif %}' + card_mod: + style: 'ha-card { background: transparent; box-shadow: none; border: none; + padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: + 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: + left; font-size: 11px; line-height: 1; }' + - type: markdown + content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'', + ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'') + | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'') + | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'') + | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if + states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2'' + else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'') + | float(0)) | round(1) }}g{% endif %}' + card_mod: + style: 'ha-card { background: transparent; box-shadow: none; border: none; + padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: + 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: + left; font-size: 11px; line-height: 1; }' + - type: markdown + content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'', + ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'') + | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'') + | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'') + | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if + states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3'' + else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'') + | float(0)) | round(1) }}g{% endif %}' + card_mod: + style: 'ha-card { background: transparent; box-shadow: none; border: none; + padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: + 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: + left; font-size: 11px; line-height: 1; }' + - type: markdown + content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'', + ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'') + | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'') + | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'') + | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if + states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4'' + else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'') + | float(0)) | round(1) }}g{% endif %}' + card_mod: + style: 'ha-card { background: transparent; box-shadow: none; border: none; + padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: + 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: + left; font-size: 11px; line-height: 1; }' + - entity: sensor.sparkx_i7_cfs_box_1_humidity + grid_options: + columns: 6 + icon: mdi:water-percent + name: Humidity + type: tile + - entity: sensor.sparkx_i7_cfs_box_1_temperature + grid_options: + columns: 6 + icon: mdi:thermometer + name: Temperature + type: tile + - cards: + - entity: sensor.sparkx_i7_active_filament_slot + grid_options: + columns: full + icon: mdi:magnet + icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'') + %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace('' + '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length + == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}' + multiline_secondary: true + name: Next Deduction Match + primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}' + secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\ + \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\ + \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\ + \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\ + \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\ + \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\ + \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\ + \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\ + \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\ + \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\ + \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\ + \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\ + \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\ + \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\ + \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\ + \ %}\n" + type: custom:mushroom-template-card + grid_options: + columns: full + type: horizontal-stack + - heading: Last/Current Print Job + heading_style: title + icon: mdi:printer-3d + type: heading + - entity: sensor.sparkx_i7_used_material_length + grid_options: + columns: 6 + rows: 1 + icon: mdi:plus-minus + name: Used Material Total + type: tile + - entity: sensor.sparkx_moonraker_print_eta + features_position: bottom + grid_options: + columns: 6 + rows: 1 + name: Print ETA + type: tile + vertical: false + - entity: sensor.sparkx_i7_filament_weight_estimated + grid_options: + columns: 6 + rows: auto + icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\ + \ ['printing', 'paused'] %}\n mdi:printer-3d-nozzle\n{% else %}\n mdi:cash-multiple\n\ + {% endif %}" + icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\ + \ st in ['printing', 'paused'] %}\n blue\n{% else %}\n green\n{% endif\ + \ %}" + multiline_secondary: true + primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\ + \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\ + \ ['printing', 'paused'] %}\n {% if is_number(w) %}{{ w | float | round(1)\ + \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\ + \ | float(0) | round(1) }} g\n{% endif %}\n" + secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\ + \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\ + \ 'paused'] %}\n {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\ + \ else %}cost unavailable{% endif %}\n{% else %}\n {{ states('input_number.sparkx_i7_last_job_cost')\ + \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n" + type: custom:mushroom-template-card + - entity: sensor.sparkx_i7_expected_material_length + grid_options: + columns: 6 + rows: auto + icon: mdi:scale-balance + icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'') + | float(0.0298) %} + + {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0) + %} + + {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0) + %} + + {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %} + + {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0)) + * gcm) | round(1) %} + + {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %} + + {% set gc = namespace(list=[]) %} + + {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'') + | default('''', true) | string).split('';'') %} + + {% set q = p | replace(''#'','''') | lower | trim %} + + {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list + = gc.list + [q] %}{% endif %} + + {% endfor %} + + {% set single = (gc.list | length) == 1 %} + + {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''', + true) | string).split(''_'')[-1] %} + + {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %} + + {% set s = namespace(short=false, ok=false, matched=0, active=false) %} + + {% for n in [''1'',''2'',''3'',''4''] %} + + {% set sp = namespace(id='''', rem=-1) %} + + {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'') + %} + + {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''', + true) | lower) == (''cfs lite '' ~ n) %} + + {% set sp.id = e[:-10] %} + + {% set sp.rem = states(e[:-10]) | float(-1) %} + + {% endif %} + + {% endfor %} + + {% if sp.id != '''' and sp.rem >= 0 %} + + {% set s.matched = s.matched + 1 %} + + {% if single %} + + {% if n == aslot %} + + {% set s.active = true %} + + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true + %}{% endif %} + + {% endif %} + + {% else %} + + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true + %}{% endif %} + + {% endif %} + + {% endif %} + + {% endfor %} + + {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''', + true)) in [''printing'',''paused''] %} + + {% set v = namespace(state=''unknown'', label=''check unavailable'') %} + + {% if not active %} + + {% set v.state = ''idle'' %} + + {% set v.label = ''no active print'' %} + + {% elif job_g <= 0 %} + + {% set v.state = ''none'' %} + + {% set v.label = ''no slicer estimate yet'' %} + + {% elif s.short %} + + {% set v.state = ''short'' %} + + {% set v.label = ''NOT ENOUGH'' %} + + {% elif s.ok %} + + {% set v.state = ''ok'' %} + + {% set v.label = ''enough'' %} + + {% elif single and aslot == '''' %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''no active CFS slot'' %} + + {% elif single and not s.active %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''active slot has no spool'' %} + + {% elif s.matched == 0 %} + + {% set v.state = ''unknown'' %} + + {% set v.label = ''no spool loaded'' %} + + {% endif %} + + {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif + v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}' + multiline_secondary: true + name: Filament Sufficiency + primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\ + \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\ + \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\ + \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\ + \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\ + \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\ + \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\ + \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\ + \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\ + \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\ + \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\ + \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\ + \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\ + \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\ + {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\ + \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\ + \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\ + \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\ + \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\ + \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\ + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\ + \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\ + \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\ + \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\ + \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\ + \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\ + \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\ + \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\ + \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\ + \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\ + \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\ + \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\ + \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\ + \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\ + \ endif %}" + secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\ + \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\ + \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\ + \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\ + \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\ + \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\ + \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\ + \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\ + \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\ + \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\ + \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\ + \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\ + \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\ + \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\ + {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\ + \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\ + \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\ + \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\ + \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\ + \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\ + {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\ + \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\ + \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\ + \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\ + \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\ + \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\ + \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\ + \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\ + \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\ + \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\ + \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\ + \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\ + \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\ + {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\ + \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\ + \ \xB7 {{ v.label }}{% endif %}" + type: custom:mushroom-template-card + - entity: sensor.sparkx_i7_nozzle_temperature + grid_options: + columns: 4 + max: 300 + min: 0 + name: Nozzle + severity: + green: 0 + red: 240 + yellow: 180 + type: gauge + unit: "\xB0C" + - entity: sensor.sparkx_i7_bed_temperature + grid_options: + columns: 4 + max: 100 + min: 0 + name: Bed + severity: + green: 0 + red: 100 + yellow: 60 + type: gauge + unit: "\xB0C" + - entity: sensor.sparkx_i7_real_time_flow + grid_options: + columns: 4 + max: 40 + min: 0 + name: Flow + severity: + green: 0 + red: 24 + yellow: 12 + type: gauge + type: grid + type: sections diff --git a/.storage/lovelace.3d_printer_cellphone b/.storage/lovelace.3d_printer_cellphone index b02439c8..9441385a 100644 --- a/.storage/lovelace.3d_printer_cellphone +++ b/.storage/lovelace.3d_printer_cellphone @@ -17,7 +17,7 @@ }, "card_param": "cards", "filter": { - "template": "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1] | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n {% set sp = namespace(ent='') %}\n {% for s in states.sensor %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_') %}\n {% set loc = (s.attributes.location | default('')) | lower %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent = s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n {% set v = namespace(html='', label='Slot ' ~ n, border='transparent', wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n {% if sp.ent != '' %}\n {% set hex = state_attr(sp.ent, 'filament_color_hex') | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent, 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1) %}\n {% set total = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n {% set raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3] | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb = hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\n {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n) else v.wrap %}\n {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n {% set v.html = \"
\" ~ remain ~ \"g
\" %}\n {% set v.label = 'Slot ' ~ n ~ (' ⚠' if band > 0 else '') %}\n {% else %}\n {% set v.html = \"
\" %}\n {% set v.label = \"Slot \" ~ n ~ \" — empty\" %}\n {% endif %}\n {% set card = {\n \"type\": \"custom:button-card\",\n \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n \"show_icon\": false,\n \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ v.html ~ \"
\" ~ v.label ~ \"
\"\n },\n \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"},\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ],\n \"custom_fields\": {\n \"tube\": [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n .tube-wrap.active .tube-bg { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active .slot-label { color: var(--primary-color); font-weight: 800; } .tube-wrap {\n display: flex;\n flex-direction: column;\n align-items: center;\n width: 100%;\n }\n .tube-bg {\n position: relative;\n width: 60px;\n height: 180px;\n background-color: #dedede;\n border-radius: 20px;\n overflow: hidden;\n border: 1px solid \" ~ v.border ~ \";\n display: flex;\n flex-direction: column;\n justify-content: flex-end;\n }\n .tube-empty {\n background: transparent;\n border: 2px dashed var(--error-color);\n }\n .tube-fill {\n width: 100%;\n border-radius: 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n top: 48%;\n left: 50%;\n transform: translate(-50%, -50%);\n font-size: 13px;\n font-weight: 800;\n color: \" ~ v.text ~ \"; text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo ~ \";\n pointer-events: none;\n z-index: 2;\n white-space: nowrap;\n }\n .slot-label {\n margin-top: 8px;\n font-size: 12px;\n font-weight: 700;\n letter-spacing: 0.3px;\n color: var(--secondary-text-color);\n }\n .slot-warn {\n color: var(--error-color);\n }\n .warn-low .tube-bg {\n background-color: #fff6df;\n outline: 2px solid var(--warning-color);\n }\n .warn-low .slot-label {\n color: var(--warning-color);\n }\n .warn-crit .tube-bg {\n background-color: #fdecea;\n outline: 2px solid var(--error-color);\n }\n .warn-crit .slot-label {\n color: var(--error-color);\n }\n \",\n \"tap_action\": {\n \"action\": \"more-info\" if sp.ent != '' else \"none\"\n }\n } %}\n\n {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n" + "template": "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1] | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n {% set sp = namespace(ent='') %}\n {% for s in states.sensor %}\n {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_') %}\n {% set loc = (s.attributes.location | default('')) | lower %}\n {% if loc == ('cfs lite ' ~ n) %}\n {% set sp.ent = s.entity_id %}\n {% endif %}\n {% endif %}\n {% endfor %}\n {% set v = namespace(html='', label='Slot ' ~ n, border='transparent', wrap='', text='#111111', halo='rgba(255,255,255,0.95)', vendor='') %}\n {% if sp.ent != '' %}\n {% set hex = state_attr(sp.ent, 'filament_color_hex') | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (state_attr(sp.ent, 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1) %}\n {% set total = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n {% set raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3] | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb = hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\n {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n) else v.wrap %}\n {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n {% set v.html = \"
\" ~ remain ~ \"g
\" %}\n {% set v.vendor = (state_attr(sp.ent, 'filament_vendor_name') | default('') | string | trim) %}{% set v.label = 'Slot ' ~ n ~ (' ⚠' if band > 0 else '') %}\n {% else %}\n {% set v.html = \"
\" %}\n {% set v.label = \"Slot \" ~ n ~ \" — empty\" %}\n {% endif %}\n {% set card = {\n \"type\": \"custom:button-card\",\n \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n \"show_icon\": false,\n \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ ((\"
\" ~ v.vendor ~ \"
\") if v.vendor else '') ~ v.html ~ \"
\" ~ v.label ~ \"
\"\n },\n \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"},\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ],\n \"custom_fields\": {\n \"tube\": [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n .tube-wrap.active .tube-bg { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active .slot-label { color: var(--primary-color); font-weight: 800; } .tube-wrap {\n display: flex;\n flex-direction: column;\n align-items: center;\n width: 100%;\n }\n .tube-bg {\n position: relative;\n width: 60px;\n height: 180px;\n background-color: #dedede;\n border-radius: 20px;\n overflow: hidden;\n border: 1px solid \" ~ v.border ~ \";\n display: flex;\n flex-direction: column;\n justify-content: flex-end;\n }\n .tube-empty {\n background: transparent;\n border: 2px dashed var(--error-color);\n }\n .tube-fill {\n width: 100%;\n border-radius: 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n top: 48%;\n left: 50%;\n transform: translate(-50%, -50%);\n font-size: 13px;\n font-weight: 800;\n color: \" ~ v.text ~ \"; text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo ~ \";\n pointer-events: none;\n z-index: 2;\n white-space: nowrap;\n }\n .slot-label {\n margin-top: 8px;\n font-size: 12px;\n font-weight: 700;\n letter-spacing: 0.3px;\n color: var(--secondary-text-color);\n }\n .slot-warn {\n color: var(--error-color);\n }\n .slot-vendor {\n margin-bottom: 2px;\n font-size: 9px;\n font-weight: 700;\n letter-spacing: 0.2px;\n text-transform: uppercase;\n color: var(--secondary-text-color);\n max-width: 70px;\n overflow: hidden;\n text-overflow: ellipsis;\n white-space: nowrap;\n }\n .warn-low .tube-bg {\n background-color: #fff6df;\n outline: 2px solid var(--warning-color);\n }\n .warn-low .slot-label {\n color: var(--warning-color);\n }\n .warn-crit .tube-bg {\n background-color: #fdecea;\n outline: 2px solid var(--error-color);\n }\n .warn-crit .slot-label {\n color: var(--error-color);\n }\n \",\n \"tap_action\": {\n \"action\": \"more-info\" if sp.ent != '' else \"none\"\n }\n } %}\n\n {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n" }, "type": "custom:auto-entities" },