6 files

automations.yaml

@@ -4554,9 +4554,9 @@
     and per-slot gram counters and latches the active CFS slot. On every slot change
     mid-print, deducts the exact extrusion of the finished segment (used_material_length
     delta x g/cm) from the Spoolman spool in the CFS Lite location matching the previous
-    slot color hex (only if that spool has remaining weight), accumulates grams per
-    slot, notifies on no-match, then re-baselines the checkpoint and advances the
-    latch.'
+    slot''s CFS Lite location (only if that spool has remaining weight), accumulates
+    grams per slot, notifies on no-match, then re-baselines the checkpoint and advances
+    the latch.'
   triggers:
   - trigger: state
     entity_id: sensor.sparkx_i7_print_status
@@ -4647,25 +4647,25 @@
           default:
           - action: notify.persistent_notification
             data:
-              title: 'Spoolman: no spool for slot color'
+              title: 'Spoolman: no spool for the latched slot'
               message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
-                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
-                location with remaining weight matches that color. Register the new
-                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight is in that slot''s CFS Lite location. Register the new roll
+                in Spoolman in that location, then adjust manually if needed.'
           - action: notify.mobile_app_francos_ipad
             data:
-              title: 'Spoolman: no spool for slot color'
+              title: 'Spoolman: no spool for the latched slot'
               message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
-                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
-                location with remaining weight matches that color. Register the new
-                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight is in that slot''s CFS Lite location. Register the new roll
+                in Spoolman in that location, then adjust manually if needed.'
           - action: notify.mobile_app_sm_f956w
             data:
-              title: 'Spoolman: no spool for slot color'
+              title: 'Spoolman: no spool for the latched slot'
               message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
-                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
-                location with remaining weight matches that color. Register the new
-                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight is in that slot''s CFS Lite location. Register the new roll
+                in Spoolman in that location, then adjust manually if needed.'
       - action: input_number.set_value
         target:
           entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
@@ -4776,10 +4776,10 @@
   alias: SparkX i7 - Filament sufficiency check at print start
   description: When a print starts and stays printing for 45 s, reports how much filament
     the job needs, how much has already been used and how much is left, then compares
-    the loaded CFS Lite spools against that. A single-colour job whose colour is in
-    a loaded slot is checked exactly against that slot's spool; otherwise the slicer
-    gives no per-colour figure, so each loaded spool is compared against the whole
-    job total. Always sends a notification.
+    the loaded CFS Lite spools against that. A single-colour job is checked exactly
+    against the spool in the print's active CFS slot; otherwise the slicer gives no
+    per-colour figure, so each loaded spool is compared against the whole job total.
+    Always sends a notification.
   triggers:
   - trigger: state
     entity_id: sensor.sparkx_i7_print_status
@@ -4948,9 +4948,8 @@
         {% else %}Active slot {{ aslot }} has no Spoolman spool at CFS Lite, so remaining
         cannot be checked.{% endif %}
 
-        {% elif single %}No exact colour match for the print colour #{{ gcol | upper
-        }} in a loaded CFS slot, so the exact spool cannot be identified.{% if ns.cover
-        %}
+        {% elif single %}No active CFS slot reported for the print colour #{{ gcol
+        | upper }}, so the exact spool cannot be identified.{% if ns.cover %}
 
         Would cover {{ job_g }} g: