From 9f8ed4ce392c8059ceb9f8e493b202a12cb42fbe Mon Sep 17 00:00:00 2001 From: Home Assistant Version Control Date: Wed, 14 Oct 2026 17:12:57 +0000 Subject: [PATCH] .storage/lovelace.sparkx_i7, zigbee2mqtt/state.json --- .storage/lovelace.sparkx_i7 | 446 ++++++++++++++++++------------------ zigbee2mqtt/state.json | 26 +-- 2 files changed, 236 insertions(+), 236 deletions(-) diff --git a/.storage/lovelace.sparkx_i7 b/.storage/lovelace.sparkx_i7 index 3a53bdd0..fbdbc3c3 100644 --- a/.storage/lovelace.sparkx_i7 +++ b/.storage/lovelace.sparkx_i7 @@ -289,11 +289,11 @@ "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_moonraker_totals_print_time", + "features_position": "bottom", "name": "Total Print", - "vertical": false, - "features_position": "bottom" + "type": "tile", + "vertical": false } ], "type": "grid" @@ -400,13 +400,11 @@ "type": "history-graph" }, { - "type": "custom:apexcharts-card", - "graph_span": "1h", - "header": { - "show": true, - "title": "Fan Speeds", - "show_states": true, - "colorize_states": true + "all_series_config": { + "show": { + "name_in_header": true + }, + "stroke_width": 2 }, "apex_config": { "chart": { @@ -417,25 +415,29 @@ }, "grid": { "xaxis": { + "borderColor": "#555", "lines": { "show": true - }, - "borderColor": "#555" + } } }, "yaxis": [ { - "opposite": true, "decimals": 0, + "opposite": true, "tickAmount": 2 } ] }, - "all_series_config": { - "stroke_width": 2, - "show": { - "name_in_header": true - } + "graph_span": "1h", + "grid_options": { + "columns": "full" + }, + "header": { + "colorize_states": true, + "show": true, + "show_states": true, + "title": "Fan Speeds" }, "series": [ { @@ -443,9 +445,7 @@ "name": "Hotend" } ], - "grid_options": { - "columns": "full" - } + "type": "custom:apexcharts-card" } ], "type": "grid" @@ -586,11 +586,11 @@ "columns": 6 }, "icon": "mdi:cash", - "name": "Job Cost (total)", - "type": "custom:mushroom-template-card", "multiline_secondary": true, + "name": "Job Cost (total)", "primary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_filament_cost') | round(2) }} ${% else %}{{ states('input_number.sparkx_i7_last_job_cost') | round(2) }} ${% endif %}", - "secondary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}this job (live){% else %}last job{% endif %}" + "secondary": "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st in ['printing', 'paused'] %}this job (live){% else %}last job{% endif %}", + "type": "custom:mushroom-template-card" }, { "entity": "sensor.sparkx_i7_filament_cost_daily", @@ -815,7 +815,7 @@ "multiline_secondary": true, "name": "Slot 1", "primary": "{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_filament') }}", - "secondary": "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{% if col %}{{ col }} · {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining') }}% left", + "secondary": "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (states(e) | replace('#','') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}", "type": "custom:mushroom-template-card" }, { @@ -972,434 +972,434 @@ "type": "sections" }, { - "title": "Spoolman", - "path": "spoolman", "icon": "mdi:package-variant-closed", - "type": "sections", "max_columns": 4, + "path": "spoolman", "sections": [ { - "type": "grid", "cards": [ { - "type": "heading", "heading": "CFS Slots — per-color deduction", - "icon": "mdi:printer-filament" + "icon": "mdi:printer-filament", + "type": "heading" }, { - "type": "custom:auto-entities", "card": { - "type": "grid", "columns": 4, - "square": false + "square": false, + "type": "grid" }, "card_param": "cards", "filter": { "template": "{% set ns = namespace(cards=[]) %}\n{% for s in states.sensor %}\n {% if s.entity_id.startswith('sensor.spoolman_spool_') %}\n {% set loc = (s.attributes.location | default('')) | lower %}\n {% if 'cfs lite' in loc %}\n {% set hex = s.attributes.filament_color_hex | default('44739e') %}\n {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n {% set remain = (s.attributes.remaining_weight | default(s.state) | float(0)) | round(1) %}\n {% set total = (s.attributes.initial_weight | default(1000) | float(1000)) %}\n {% set raw_pct = ((remain / total) * 100) | round(1) %}\n {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n {% set border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n\n {% set card = {\n \"type\": \"custom:button-card\",\n \"entity\": s.entity_id,\n \"show_icon\": false,\n \"show_state\": false,\n \"show_name\": false,\n \"custom_fields\": {\n \"tube\": \"
\" ~ remain ~ \"g
\"\n },\n \"styles\": {\n \"card\": [\n {\"background\": \"transparent\"},\n {\"box-shadow\": \"none\"},\n {\"border\": \"none\"},\n {\"padding\": \"8px 2px\"},\n {\"display\": \"flex\"},\n {\"flex-direction\": \"column\"},\n {\"align-items\": \"center\"}\n ],\n \"custom_fields\": {\n \"tube\": [\n {\"width\": \"100%\"},\n {\"display\": \"flex\"},\n {\"justify-content\": \"center\"}\n ]\n }\n },\n \"extra_styles\": \"\n .tube-bg {\n position: relative;\n width: 60px;\n height: 180px;\n background-color: #dedede;\n border-radius: 20px;\n overflow: hidden;\n border: 1px solid \" ~ border ~ \";\n display: flex;\n flex-direction: column;\n justify-content: flex-end;\n }\n .tube-fill {\n width: 100%;\n border-radius: 0 0 19px 19px;\n }\n .tube-text {\n position: absolute;\n top: 48%;\n left: 50%;\n transform: translate(-50%, -50%);\n font-size: 13px;\n font-weight: 800;\n color: #111111;\n pointer-events: none;\n z-index: 2;\n white-space: nowrap;\n }\n \",\n \"tap_action\": {\n \"action\": \"more-info\"\n }\n } %}\n {% set ns.cards = ns.cards + [card] %}\n {% endif %}\n {% endif %}\n{% endfor %}\n{{ ns.cards }}" - } + }, + "type": "custom:auto-entities" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_cfs_box_1_slot_1_color", - "name": "Slot 1", + "grid_options": { + "columns": "full" + }, "icon": "mdi:printer-filament", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 1", + "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}", "primary": "{{ states('sensor.sparkx_i7_slot_1_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | upper }})", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }} g", - "multiline_secondary": true, + "type": "custom:mushroom-template-card" + }, + { + "entity": "sensor.sparkx_i7_cfs_box_1_slot_2_color", "grid_options": { "columns": "full" }, - "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}" - }, - { - "type": "custom:mushroom-template-card", - "entity": "sensor.sparkx_i7_cfs_box_1_slot_2_color", - "name": "Slot 2", "icon": "mdi:printer-filament", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 2", + "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}", "primary": "{{ states('sensor.sparkx_i7_slot_2_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | upper }})", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }} g", - "multiline_secondary": true, + "type": "custom:mushroom-template-card" + }, + { + "entity": "sensor.sparkx_i7_cfs_box_1_slot_3_color", "grid_options": { "columns": "full" }, - "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}" - }, - { - "type": "custom:mushroom-template-card", - "entity": "sensor.sparkx_i7_cfs_box_1_slot_3_color", - "name": "Slot 3", "icon": "mdi:printer-filament", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 3", + "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}", "primary": "{{ states('sensor.sparkx_i7_slot_3_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | upper }})", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }} g", - "multiline_secondary": true, + "type": "custom:mushroom-template-card" + }, + { + "entity": "sensor.sparkx_i7_cfs_box_1_slot_4_color", "grid_options": { "columns": "full" }, - "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}" - }, - { - "type": "custom:mushroom-template-card", - "entity": "sensor.sparkx_i7_cfs_box_1_slot_4_color", - "name": "Slot 4", "icon": "mdi:printer-filament", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 4", + "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}", "primary": "{{ states('sensor.sparkx_i7_slot_4_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | upper }})", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }} g", - "multiline_secondary": true, + "type": "custom:mushroom-template-card" + }, + { + "heading": "Usage", + "heading_style": "title", + "icon": "mdi:printer-3d-nozzle-outline", + "type": "heading" + }, + { + "entity": "input_number.sparkx_i7_spoolman_length_checkpoint", "grid_options": { "columns": "full" }, - "picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#','') | lower %}{% set svg = '' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}" - }, - { - "type": "heading", - "icon": "mdi:printer-3d-nozzle-outline", - "heading_style": "title", - "heading": "Usage" - }, - { - "type": "tile", - "entity": "input_number.sparkx_i7_spoolman_length_checkpoint", - "name": "Length Checkpoint (cm)", "icon": "mdi:ruler-measure", - "grid_options": { - "columns": "full" - } + "name": "Length Checkpoint (cm)", + "type": "tile" }, { - "type": "tile", "entity": "input_text.sparkx_i7_print_spool_latch", - "name": "Latched CFS Slot", + "grid_options": { + "columns": "full" + }, "icon": "mdi:link-variant", - "grid_options": { - "columns": "full" - } + "name": "Latched CFS Slot", + "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_i7_used_material_length", - "name": "Used Material Total (cm)", - "icon": "mdi:plus-minus", "grid_options": { "columns": "full" - } + }, + "icon": "mdi:plus-minus", + "name": "Used Material Total (cm)", + "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_i7_filament_weight_estimated", - "name": "Current Job Weight (est.)", - "icon": "mdi:weight-gram", "grid_options": { "columns": 12, "rows": 1 - } + }, + "icon": "mdi:weight-gram", + "name": "Current Job Weight (est.)", + "type": "tile" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_active_filament_slot", - "name": "Next Deduction Match", - "icon": "mdi:magnet", - "icon_color": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set c = states('sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", - "primary": "{{ states('sensor.sparkx_i7_active_filament_slot') }}", - "secondary": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color' %}{% set color = states(ce) | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Color #{{ color | upper }} → spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left){% elif slot in ['', 'unknown', 'unavailable'] %}No slot latched{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}Color #{{ color | upper }} — no spool with stock{% endif %}", - "multiline_secondary": true, "grid_options": { "columns": "full" - } + }, + "icon": "mdi:magnet", + "icon_color": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set c = states('sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Next Deduction Match", + "primary": "{{ states('sensor.sparkx_i7_active_filament_slot') }}", + "secondary": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color' %}{% set color = states(ce) | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Color #{{ color | upper }} → spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left){% elif slot in ['', 'unknown', 'unavailable'] %}No slot latched{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}Color #{{ color | upper }} — no spool with stock{% endif %}", + "type": "custom:mushroom-template-card" }, { - "type": "markdown", "content": "**Spoolman UI:** [http://192.168.1.140:7912](http://192.168.1.140:7912)\n\nEach CFS slot is matched to the Spoolman spool with the same **color hex** that still has stock (remaining > 0) **and whose location is CFS Lite**. All 4 rolls live in the **CFS Lite** location in Spoolman.\n\n**Replaced a roll?** Register the new roll in Spoolman with the same color hex and location CFS Lite. No Home Assistant changes needed — a same-color roll in another location (e.g. Storage) is ignored, and exhausted spools are skipped automatically.", "grid_options": { "columns": "full" - } + }, + "type": "markdown" } - ] + ], + "type": "grid" }, { - "type": "grid", "cards": [ { - "type": "heading", "heading": "Spool Details — CFS Lite", - "icon": "mdi:spool" + "icon": "mdi:spool", + "type": "heading" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_cfs_box_1_slot_1_color", - "name": "Slot 1", + "grid_options": { + "columns": "full" + }, "icon": "mdi:spool", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 1", "picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}", "primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}", - "multiline_secondary": true, - "grid_options": { - "columns": "full" - } + "type": "custom:mushroom-template-card" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_cfs_box_1_slot_2_color", - "name": "Slot 2", + "grid_options": { + "columns": "full" + }, "icon": "mdi:spool", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 2", "picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}", "primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}", - "multiline_secondary": true, - "grid_options": { - "columns": "full" - } + "type": "custom:mushroom-template-card" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_cfs_box_1_slot_3_color", - "name": "Slot 3", + "grid_options": { + "columns": "full" + }, "icon": "mdi:spool", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 3", "picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}", "primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}", - "multiline_secondary": true, - "grid_options": { - "columns": "full" - } + "type": "custom:mushroom-template-card" }, { - "type": "custom:mushroom-template-card", "entity": "sensor.sparkx_i7_cfs_box_1_slot_4_color", - "name": "Slot 4", + "grid_options": { + "columns": "full" + }, "icon": "mdi:spool", "icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}", + "multiline_secondary": true, + "name": "Slot 4", "picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}", "primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}", "secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}", - "multiline_secondary": true, - "grid_options": { - "columns": "full" - } + "type": "custom:mushroom-template-card" } - ] + ], + "type": "grid" }, { - "type": "grid", "cards": [ { - "type": "heading", "heading": "Adjust Remaining", - "icon": "mdi:pencil-outline" + "icon": "mdi:pencil-outline", + "type": "heading" }, { - "type": "entities", - "title": "Set value (g)", - "show_header_toggle": false, "entities": [ "input_number.spoolman_set_remaining" ], "grid_options": { "columns": "full" - } + }, + "show_header_toggle": false, + "title": "Set value (g)", + "type": "entities" }, { - "type": "tile", "entity": "input_number.spoolman_set_remaining", - "name": "Apply to Slot 1", - "icon": "mdi:content-save-outline", "grid_options": { "columns": 3 }, + "icon": "mdi:content-save-outline", + "name": "Apply to Slot 1", "tap_action": { "action": "perform-action", - "perform_action": "script.spoolman_set_spool_remaining", + "confirmation": { + "text": "Overwrite remaining weight of the spool matching Slot 1 (by color hex) in Spoolman?" + }, "data": { "slot": 1 }, - "confirmation": { - "text": "Overwrite remaining weight of the spool matching Slot 1 (by color hex) in Spoolman?" - } - } + "perform_action": "script.spoolman_set_spool_remaining" + }, + "type": "tile" }, { - "type": "tile", "entity": "input_number.spoolman_set_remaining", - "name": "Apply to Slot 2", - "icon": "mdi:content-save-outline", "grid_options": { "columns": 3 }, + "icon": "mdi:content-save-outline", + "name": "Apply to Slot 2", "tap_action": { "action": "perform-action", - "perform_action": "script.spoolman_set_spool_remaining", + "confirmation": { + "text": "Overwrite remaining weight of the spool matching Slot 2 (by color hex) in Spoolman?" + }, "data": { "slot": 2 }, - "confirmation": { - "text": "Overwrite remaining weight of the spool matching Slot 2 (by color hex) in Spoolman?" - } - } + "perform_action": "script.spoolman_set_spool_remaining" + }, + "type": "tile" }, { - "type": "tile", "entity": "input_number.spoolman_set_remaining", - "name": "Apply to Slot 3", - "icon": "mdi:content-save-outline", "grid_options": { "columns": 3 }, + "icon": "mdi:content-save-outline", + "name": "Apply to Slot 3", "tap_action": { "action": "perform-action", - "perform_action": "script.spoolman_set_spool_remaining", + "confirmation": { + "text": "Overwrite remaining weight of the spool matching Slot 3 (by color hex) in Spoolman?" + }, "data": { "slot": 3 }, - "confirmation": { - "text": "Overwrite remaining weight of the spool matching Slot 3 (by color hex) in Spoolman?" - } - } + "perform_action": "script.spoolman_set_spool_remaining" + }, + "type": "tile" }, { - "type": "tile", "entity": "input_number.spoolman_set_remaining", - "name": "Apply to Slot 4", - "icon": "mdi:content-save-outline", "grid_options": { "columns": 3 }, + "icon": "mdi:content-save-outline", + "name": "Apply to Slot 4", "tap_action": { "action": "perform-action", - "perform_action": "script.spoolman_set_spool_remaining", + "confirmation": { + "text": "Overwrite remaining weight of the spool matching Slot 4 (by color hex) in Spoolman?" + }, "data": { "slot": 4 }, - "confirmation": { - "text": "Overwrite remaining weight of the spool matching Slot 4 (by color hex) in Spoolman?" - } - } + "perform_action": "script.spoolman_set_spool_remaining" + }, + "type": "tile" }, { - "type": "markdown", "content": "**1.** Type the new remaining grams above. **2.** Tap **Apply to Slot N** for the slot holding that roll — it resolves the spool by the slot's color hex, so it also works when the spool is exhausted (e.g. right after replacing a roll). **3.** The value is **absolute** — it replaces Spoolman's remaining weight; print deductions continue from there. Avoid adjusting during a running print.", "grid_options": { "columns": "full" - } + }, + "type": "markdown" } - ] + ], + "type": "grid" }, { - "type": "grid", "cards": [ { - "type": "heading", "heading": "Print Linkage", - "icon": "mdi:printer-3d-nozzle" + "icon": "mdi:printer-3d-nozzle", + "type": "heading" }, { - "type": "tile", "entity": "automation.sparkx_i7_latch_print_spool_for_spoolman", - "name": "Latch + Segment Deduction", + "grid_options": { + "columns": 3 + }, "icon": "mdi:link-variant", - "grid_options": { - "columns": 3 - } + "name": "Latch + Segment Deduction", + "type": "tile" }, { - "type": "tile", "entity": "automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete", - "name": "Print Complete Deduction", + "grid_options": { + "columns": 3 + }, "icon": "mdi:minus-circle-outline", - "grid_options": { - "columns": 3 - } + "name": "Print Complete Deduction", + "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_i7_filament_weight_estimated", - "name": "Current Job Weight (est.)", + "grid_options": { + "columns": 3 + }, "icon": "mdi:weight-gram", - "grid_options": { - "columns": 3 - } + "name": "Current Job Weight (est.)", + "type": "tile" }, { - "type": "tile", "entity": "input_number.sparkx_i7_filament_g_cm", - "name": "Filament g/cm", + "grid_options": { + "columns": 3 + }, "icon": "mdi:ruler", - "grid_options": { - "columns": 3 - } + "name": "Filament g/cm", + "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_i7_active_filament_slot", - "name": "Active CFS Slot", - "icon": "mdi:palette-swatch-variant", "grid_options": { "columns": 3 - } + }, + "icon": "mdi:palette-swatch-variant", + "name": "Active CFS Slot", + "type": "tile" }, { - "type": "tile", "entity": "sensor.sparkx_i7_used_material_length", - "name": "Used Material Total (cm)", - "icon": "mdi:plus-minus", "grid_options": { "columns": 6, "rows": 1 - } + }, + "icon": "mdi:plus-minus", + "name": "Used Material Total (cm)", + "type": "tile" } - ] + ], + "type": "grid" }, { - "type": "grid", "cards": [ { - "type": "heading", "heading": "Spool History — CFS Lite (auto)", - "icon": "mdi:history" + "icon": "mdi:history", + "type": "heading" }, { - "type": "custom:auto-entities", + "card": { + "hours_to_show": 168, + "show_names": true, + "title": "Remaining weight (7 days)", + "type": "history-graph" + }, "filter": { "include": [ { - "entity_id": "sensor.spoolman_spool_*", "attributes": { "location": "CFS Lite" - } + }, + "entity_id": "sensor.spoolman_spool_*" } ] }, - "sort": { - "method": "attribute", - "attribute": "id", - "numeric": true - }, - "card": { - "type": "history-graph", - "title": "Remaining weight (7 days)", - "hours_to_show": 168, - "show_names": true - }, - "show_empty": false, "grid_options": { "columns": "full" - } + }, + "show_empty": false, + "sort": { + "attribute": "id", + "method": "attribute", + "numeric": true + }, + "type": "custom:auto-entities" }, { - "type": "markdown", "content": "Every spool with location **CFS Lite** joins this graph automatically — register a new roll in Spoolman (same color hex, location CFS Lite) and it appears without dashboard edits. History follows the spool entity; a replaced roll keeps its own history under its own spool id.", "grid_options": { "columns": "full" - } + }, + "type": "markdown" } - ] + ], + "type": "grid" } - ] + ], + "title": "Spoolman", + "type": "sections" } ] } diff --git a/zigbee2mqtt/state.json b/zigbee2mqtt/state.json index acf5a463..cbf0369a 100644 --- a/zigbee2mqtt/state.json +++ b/zigbee2mqtt/state.json @@ -4,7 +4,7 @@ "state": "ON", "led_brightness": 100, "countdown_to_turn_off": 0, - "voltage": 118.2, + "voltage": 119, "countdown_to_turn_on": 0, "ac_frequency": 60, "power_factor": 0.11, @@ -30,7 +30,7 @@ "power": 1.9, "current": 0.09, "energy": 56.31, - "power_factor": 0.17, + "power_factor": 0.18, "update": { "state": "idle", "installed_version": 268513381, @@ -45,10 +45,10 @@ "state": "ON", "led_brightness": 100, "countdown_to_turn_off": 0, - "voltage": 118.6, + "voltage": 118.3, "countdown_to_turn_on": 0, "energy": 108.83, - "power_factor": 0.2, + "power_factor": 0.91, "ac_frequency": 60, "update": { "state": "idle", @@ -58,8 +58,8 @@ "latest_release_notes": null }, "linkquality": 145, - "power": 0.2, - "current": 0.01, + "power": 92.8, + "current": 0.9, "power_on_behavior": "on" }, "0xb40e060fffe031e3": { @@ -74,11 +74,11 @@ "led_brightness": 100, "countdown_to_turn_off": 0, "countdown_to_turn_on": 0, - "voltage": 116.6, + "voltage": 117.6, "state": "ON", "ac_frequency": 60, "energy": 221.03, - "power": 102, + "power": 96.5, "current": 0.91, "power_factor": 0.39, "update": { @@ -95,11 +95,11 @@ "led_brightness": 100, "countdown_to_turn_off": 0, "countdown_to_turn_on": 0, - "voltage": 118.3, + "voltage": 118.8, "energy": 103.6, "state": "ON", - "power": 32.3, - "current": 0.48, + "power": 27.7, + "current": 0.43, "ac_frequency": 60, "power_factor": 0.54, "update": { @@ -114,7 +114,7 @@ }, "0xffffb40e060895b3": { "state": "ON", - "voltage": 118.3, + "voltage": 118.8, "ac_frequency": 60, "energy": 15.19, "current": 0, @@ -136,7 +136,7 @@ "0xffffb40e0608864e": { "led_brightness": 100, "countdown_to_turn_off": 0, - "voltage": 118.8, + "voltage": 119.3, "energy": 36.92, "countdown_to_turn_on": 0, "state": "ON",