3 files
This commit is contained in:
Home Assistant Version Control
+19
-19
@@ -935,10 +935,10 @@
|
||||
"icon": "mdi:printer-filament",
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_1_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %} · this print: {{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }} g",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -948,10 +948,10 @@
|
||||
"icon": "mdi:printer-filament",
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_2_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %} · this print: {{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }} g",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -961,10 +961,10 @@
|
||||
"icon": "mdi:printer-filament",
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_3_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %} · this print: {{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }} g",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -974,10 +974,10 @@
|
||||
"icon": "mdi:printer-filament",
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_4_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %} · this print: {{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }} g",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -986,7 +986,7 @@
|
||||
"name": "Length Checkpoint (cm)",
|
||||
"icon": "mdi:ruler-measure",
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -995,7 +995,7 @@
|
||||
"name": "Latched CFS Slot",
|
||||
"icon": "mdi:link-variant",
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -1004,7 +1004,7 @@
|
||||
"name": "Used Material Total (cm)",
|
||||
"icon": "mdi:plus-minus",
|
||||
"grid_options": {
|
||||
"columns": 3
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -1045,10 +1045,10 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\nRemaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\nRemaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\nSpool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\nTemps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\nFlow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\nRegistered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 6
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -1059,10 +1059,10 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\nRemaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\nRemaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\nSpool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\nTemps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\nFlow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\nRegistered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 6
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -1073,10 +1073,10 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\nRemaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\nRemaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\nSpool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\nTemps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\nFlow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\nRegistered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 6
|
||||
"columns": "full"
|
||||
}
|
||||
},
|
||||
{
|
||||
@@ -1087,10 +1087,10 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\nRemaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\nRemaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\nSpool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\nTemps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\nFlow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\nRegistered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"grid_options": {
|
||||
"columns": 6
|
||||
"columns": "full"
|
||||
}
|
||||
}
|
||||
]
|
||||
|
||||
Reference in New Issue
Block a user