automations.yaml, zigbee2mqtt/state.json

automations.yaml

@@ -4128,3 +4128,88 @@
               target:
                 entity_id: input_boolean.3d_printer_running
   mode: single
+- id: '1789900000001'
+  alias: 3D Print - Safe to Remove
+  description: After a successful SparkX i7 print, wait for the bed and nozzle to
+    stay at or below 30 degrees for 5 minutes, then notify all existing print devices.
+  triggers:
+  - entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    id: print_completed
+    to: completed
+    trigger: state
+  - entity_id: sensor.sparkx_i7_print_status
+    id: new_print
+    to: printing
+    trigger: state
+  actions:
+  - choose:
+    - conditions:
+      - condition: trigger
+        id: print_completed
+      sequence:
+      - variables:
+          print_name: '{% set file = trigger.to_state.attributes.get(''file'', '''')
+            %} {% if file in ['''', none, ''unknown'', ''unavailable''] %}The print
+            {% else %}{{ file.split(''/'')[-1].replace(''.gcode'', '''') }} {% endif
+            %}'
+      - repeat:
+          sequence:
+          - continue_on_timeout: false
+            timeout: 02:00:00
+            wait_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+              and states(''sensor.sparkx_i7_bed_temperature'') | float(100) <= 30
+              and states(''sensor.sparkx_i7_nozzle_temperature'') | float(300) <=
+              30 }}'
+          - delay:
+              minutes: 5
+          - if:
+            - condition: template
+              value_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+                and states(''sensor.sparkx_i7_bed_temperature'') | float(100) <= 30
+                and states(''sensor.sparkx_i7_nozzle_temperature'') | float(300) <=
+                30 }}'
+            then:
+            - variables:
+                bed_temp: '{{ states(''sensor.sparkx_i7_bed_temperature'') | float(0)
+                  | round(1) }}'
+                nozzle_temp: '{{ states(''sensor.sparkx_i7_nozzle_temperature'') |
+                  float(0) | round(1) }}'
+                safe_message: '{{ print_name }} is cool enough to remove. Bed: {{
+                  bed_temp }} °C, nozzle: {{ nozzle_temp }} °C.'
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.sm_f956w
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.motorola_one_vision
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.francos_ipad
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.sm_t387w
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.franco
+            - stop: Safe-to-remove notification sent.
+          while:
+          - condition: template
+            value_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+              }}'
+  mode: restart