automations.yaml, zigbee2mqtt/state.json

automations.yaml

@@ -4128,3 +4128,88 @@
               target:
                 entity_id: input_boolean.3d_printer_running
   mode: single
+- id: '1789900000001'
+  alias: 3D Print - Safe to Remove
+  description: After a successful SparkX i7 print, wait for the bed and nozzle to
+    stay at or below 30 degrees for 5 minutes, then notify all existing print devices.
+  triggers:
+  - entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    id: print_completed
+    to: completed
+    trigger: state
+  - entity_id: sensor.sparkx_i7_print_status
+    id: new_print
+    to: printing
+    trigger: state
+  actions:
+  - choose:
+    - conditions:
+      - condition: trigger
+        id: print_completed
+      sequence:
+      - variables:
+          print_name: '{% set file = trigger.to_state.attributes.get(''file'', '''')
+            %} {% if file in ['''', none, ''unknown'', ''unavailable''] %}The print
+            {% else %}{{ file.split(''/'')[-1].replace(''.gcode'', '''') }} {% endif
+            %}'
+      - repeat:
+          sequence:
+          - continue_on_timeout: false
+            timeout: 02:00:00
+            wait_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+              and states(''sensor.sparkx_i7_bed_temperature'') | float(100) <= 30
+              and states(''sensor.sparkx_i7_nozzle_temperature'') | float(300) <=
+              30 }}'
+          - delay:
+              minutes: 5
+          - if:
+            - condition: template
+              value_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+                and states(''sensor.sparkx_i7_bed_temperature'') | float(100) <= 30
+                and states(''sensor.sparkx_i7_nozzle_temperature'') | float(300) <=
+                30 }}'
+            then:
+            - variables:
+                bed_temp: '{{ states(''sensor.sparkx_i7_bed_temperature'') | float(0)
+                  | round(1) }}'
+                nozzle_temp: '{{ states(''sensor.sparkx_i7_nozzle_temperature'') |
+                  float(0) | round(1) }}'
+                safe_message: '{{ print_name }} is cool enough to remove. Bed: {{
+                  bed_temp }} °C, nozzle: {{ nozzle_temp }} °C.'
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.sm_f956w
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.motorola_one_vision
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.francos_ipad
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.sm_t387w
+            - action: notify.send_message
+              data:
+                message: '{{ safe_message }}'
+                title: 3D print safe to remove
+              target:
+                entity_id: notify.franco
+            - stop: Safe-to-remove notification sent.
+          while:
+          - condition: template
+            value_template: '{{ is_state(''sensor.sparkx_i7_print_status'', ''completed'')
+              }}'
+  mode: restart

zigbee2mqtt/state.json

@@ -4,7 +4,7 @@
         "state": "ON",
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 119.6,
+        "voltage": 119.8,
         "countdown_to_turn_on": 0,
         "ac_frequency": 60,
         "power_factor": 0.14,
@@ -15,22 +15,22 @@
             "latest_source": "https://raw.githubusercontent.com/Koenkk/zigbee-OTA/master/images/ThirdReality/SmartPlug_Zigbee_PROD_OTA_V101_1.01.01.ota",
             "latest_release_notes": null
         },
-        "power": 0.5,
+        "power": 0.4,
         "linkquality": 91,
         "current": 0.03,
         "power_on_behavior": "on"
     },
     "0xffffb40e0607af27": {
         "state": "ON",
-        "voltage": 119,
+        "voltage": 118.6,
         "ac_frequency": 60,
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "power": 2,
+        "power": 2.1,
         "current": 0.09,
-        "energy": 46.97,
+        "energy": 46.98,
-        "power_factor": 0.16,
+        "power_factor": 0.18,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -45,10 +45,10 @@
         "state": "ON",
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 118.6,
+        "voltage": 119.3,
         "countdown_to_turn_on": 0,
-        "energy": 91.26,
+        "energy": 91.3,
-        "power_factor": 0.9,
+        "power_factor": 0.2,
         "ac_frequency": 60,
         "update": {
             "state": "idle",
@@ -58,13 +58,13 @@
             "latest_release_notes": null
         },
         "linkquality": 120,
-        "power": 82.6,
+        "power": 0.2,
-        "current": 0.78,
+        "current": 0.01,
         "power_on_behavior": "on"
     },
     "0xb40e060fffe031e3": {
         "battery": 100,
-        "contact": false,
+        "contact": true,
         "tamper": false,
         "battery_low": false,
         "linkquality": 120,
@@ -74,12 +74,12 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 118.2,
+        "voltage": 118.3,
         "state": "ON",
         "ac_frequency": 60,
-        "energy": 186.88,
+        "energy": 186.98,
-        "power": 0.8,
+        "power": 109.3,
-        "current": 0.05,
+        "current": 0.95,
         "power_factor": 0.34,
         "update": {
             "state": "idle",
@@ -95,13 +95,13 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 119.3,
+        "voltage": 118.5,
-        "energy": 92.79,
+        "energy": 92.87,
         "state": "ON",
-        "power": 58.6,
+        "power": 58.4,
-        "current": 0.64,
+        "current": 0.61,
         "ac_frequency": 60,
-        "power_factor": 0.8,
+        "power_factor": 0.65,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -114,12 +114,12 @@
     },
     "0xffffb40e060895b3": {
         "state": "ON",
-        "voltage": 119.2,
+        "voltage": 119.1,
         "ac_frequency": 60,
-        "energy": 12.24,
+        "energy": 12.27,
         "current": 0.01,
-        "power": 0,
+        "power": 0.1,
-        "power_factor": 0.22,
+        "power_factor": 0.11,
         "linkquality": 87,
         "update": {
             "state": "idle",
@@ -136,7 +136,7 @@
     "0xffffb40e0608864e": {
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 119.6,
+        "voltage": 119.9,
         "energy": 29.64,
         "countdown_to_turn_on": 0,
         "state": "ON",
@@ -171,7 +171,7 @@
     },
     "0xa4c1380d0679ffff": {
         "battery": 100,
-        "temperature": 25.8,
+        "temperature": 26.4,
         "temperature_units": "celsius",
         "temperature_calibration": 0,
         "update": {
@@ -224,7 +224,7 @@
     },
     "0xb40e060fffe717c5": {
         "battery": 100,
-        "occupancy": true,
+        "occupancy": false,
         "tamper": false,
         "battery_low": false,
         "linkquality": 116,