automations.yaml

automations.yaml

@@ -3547,132 +3547,65 @@
   mode: single
 - id: '1787462157568'
   alias: 3D Print Early Layers Snapshot
-  description: Sends a webcam snapshot once per print when Z crosses 1.0 mm while
+  description: Sends a SparkX i7 camera snapshot once per print when Z crosses 1.0
-    printing, approximating layers 4-5 at typical 0.2-0.28 mm layer heights.
+    mm while printing.
   triggers:
   - above: 1
-    entity_id: sensor.octoprint_current_z
+    entity_id: sensor.sparkx_i7_position_z
     trigger: numeric_state
   conditions:
   - condition: state
-    entity_id: binary_sensor.octoprint_printing
+    entity_id: sensor.sparkx_i7_print_status
-    state: 'on'
+    state: printing
   actions:
+  - variables:
+      early_message: '{% set f = state_attr(''sensor.sparkx_i7_print_status'', ''file'')
+        or '''' %} {% set file = ''No file'' if f in ['''', none, ''unknown'', ''unavailable'']
+        else f.split(''/'')[-1].replace(''.gcode'', '''') %} {% set pct = states(''sensor.sparkx_i7_print_progress'')
+        | int(0) %} {% set elapsed = states(''sensor.sparkx_i7_print_job_time'') |
+        int(0) %} {% set remaining = states(''sensor.sparkx_i7_print_time_left'')
+        | int(0) %} {% set finish = (now() + timedelta(seconds=remaining)).strftime(''%I:%M
+        %p'').lstrip(''0'') if remaining > 0 else ''unknown'' %} {{ file }} Progress:
+        {{ pct }}% · Elapsed: {% if elapsed >= 3600 %}{{ elapsed // 3600 }}h {{ ((elapsed
+        % 3600) // 60) }}m{% else %}{{ ((elapsed % 3600) // 60) }}m{% endif %} · Left:
+        {% if remaining > 0 %}{% if remaining >= 3600 %}{{ remaining // 3600 }}h {{
+        ((remaining % 3600) // 60) }}m{% else %}{{ ((remaining % 3600) // 60) }}m{%
+        endif %}{% else %}unknown{% endif %} Est. finish: {{ finish }}'
   - action: camera.snapshot
-    target:
-      entity_id: camera.endercamera_duckdns_org
     data:
-      filename: /config/www/octoprint_snapshot.jpg
+      filename: /config/www/sparkx_i7_early_snapshot.jpg
+    target:
+      entity_id: camera.sparkx_i7_printer_camera
   - parallel:
     - action: notify.mobile_app_sm_f956w
       data:
-        title: 3D print early check
-        message: '{% set f = states(''sensor.octoprint_print_file'') %}{% set file
-          = ''No file'' if f in [''unknown'', ''unavailable'', ''none''] else f.replace(''.gcode'',
-          '''') %}{% set pct = states(''sensor.octoprint_print_progress'') | round(0)
-          | int(0) %}{% set es = states(''sensor.octoprint_elapsed'') | int(0) %}{%
-          set ts = states(''sensor.octoprint_time_left'') | int(0) %}{% set dt = states(''sensor.octoprint_approximate_completion_time'')
-          | as_datetime %}{% macro dur(s) -%}{%- if s >= 3600 -%}{{ (s // 3600) }}h
-          {{ ((s % 3600) // 60) }}m{%- else -%}{{ ((s % 3600) // 60) }}m{%- endif
-          -%}{%- endmacro %}{% if dt %}{% set fin = ''~'' + as_local(dt).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% elif ts > 0 %}{% set fin = ''~'' + (now() + timedelta(seconds=ts)).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% else %}{% set fin = ''unknown'' %}{% endif %}
-
-          {{ file }}
-
-          Progress: {{ pct }}% · Elapsed: {{ dur(es) }} · Left: {{ dur(ts) if ts >
-          0 else ''unknown'' }}
-
-          Est. finish: {{ fin }}'
         data:
-          image: /local/octoprint_snapshot.jpg
+          image: /local/sparkx_i7_early_snapshot.jpg
+        message: '{{ early_message }}'
+        title: 3D print early check
     - action: notify.mobile_app_motorola_one_vision
       data:
-        title: 3D print early check
-        message: '{% set f = states(''sensor.octoprint_print_file'') %}{% set file
-          = ''No file'' if f in [''unknown'', ''unavailable'', ''none''] else f.replace(''.gcode'',
-          '''') %}{% set pct = states(''sensor.octoprint_print_progress'') | round(0)
-          | int(0) %}{% set es = states(''sensor.octoprint_elapsed'') | int(0) %}{%
-          set ts = states(''sensor.octoprint_time_left'') | int(0) %}{% set dt = states(''sensor.octoprint_approximate_completion_time'')
-          | as_datetime %}{% macro dur(s) -%}{%- if s >= 3600 -%}{{ (s // 3600) }}h
-          {{ ((s % 3600) // 60) }}m{%- else -%}{{ ((s % 3600) // 60) }}m{%- endif
-          -%}{%- endmacro %}{% if dt %}{% set fin = ''~'' + as_local(dt).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% elif ts > 0 %}{% set fin = ''~'' + (now() + timedelta(seconds=ts)).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% else %}{% set fin = ''unknown'' %}{% endif %}
-
-          {{ file }}
-
-          Progress: {{ pct }}% · Elapsed: {{ dur(es) }} · Left: {{ dur(ts) if ts >
-          0 else ''unknown'' }}
-
-          Est. finish: {{ fin }}'
         data:
-          image: /local/octoprint_snapshot.jpg
+          image: /local/sparkx_i7_early_snapshot.jpg
+        message: '{{ early_message }}'
+        title: 3D print early check
     - action: notify.mobile_app_francos_ipad
       data:
-        title: 3D print early check
-        message: '{% set f = states(''sensor.octoprint_print_file'') %}{% set file
-          = ''No file'' if f in [''unknown'', ''unavailable'', ''none''] else f.replace(''.gcode'',
-          '''') %}{% set pct = states(''sensor.octoprint_print_progress'') | round(0)
-          | int(0) %}{% set es = states(''sensor.octoprint_elapsed'') | int(0) %}{%
-          set ts = states(''sensor.octoprint_time_left'') | int(0) %}{% set dt = states(''sensor.octoprint_approximate_completion_time'')
-          | as_datetime %}{% macro dur(s) -%}{%- if s >= 3600 -%}{{ (s // 3600) }}h
-          {{ ((s % 3600) // 60) }}m{%- else -%}{{ ((s % 3600) // 60) }}m{%- endif
-          -%}{%- endmacro %}{% if dt %}{% set fin = ''~'' + as_local(dt).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% elif ts > 0 %}{% set fin = ''~'' + (now() + timedelta(seconds=ts)).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% else %}{% set fin = ''unknown'' %}{% endif %}
-
-          {{ file }}
-
-          Progress: {{ pct }}% · Elapsed: {{ dur(es) }} · Left: {{ dur(ts) if ts >
-          0 else ''unknown'' }}
-
-          Est. finish: {{ fin }}'
         data:
-          image: /local/octoprint_snapshot.jpg
+          image: /local/sparkx_i7_early_snapshot.jpg
+        message: '{{ early_message }}'
+        title: 3D print early check
     - action: notify.mobile_app_sm_t387w
       data:
-        title: 3D print early check
-        message: '{% set f = states(''sensor.octoprint_print_file'') %}{% set file
-          = ''No file'' if f in [''unknown'', ''unavailable'', ''none''] else f.replace(''.gcode'',
-          '''') %}{% set pct = states(''sensor.octoprint_print_progress'') | round(0)
-          | int(0) %}{% set es = states(''sensor.octoprint_elapsed'') | int(0) %}{%
-          set ts = states(''sensor.octoprint_time_left'') | int(0) %}{% set dt = states(''sensor.octoprint_approximate_completion_time'')
-          | as_datetime %}{% macro dur(s) -%}{%- if s >= 3600 -%}{{ (s // 3600) }}h
-          {{ ((s % 3600) // 60) }}m{%- else -%}{{ ((s % 3600) // 60) }}m{%- endif
-          -%}{%- endmacro %}{% if dt %}{% set fin = ''~'' + as_local(dt).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% elif ts > 0 %}{% set fin = ''~'' + (now() + timedelta(seconds=ts)).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% else %}{% set fin = ''unknown'' %}{% endif %}
-
-          {{ file }}
-
-          Progress: {{ pct }}% · Elapsed: {{ dur(es) }} · Left: {{ dur(ts) if ts >
-          0 else ''unknown'' }}
-
-          Est. finish: {{ fin }}'
         data:
-          image: /local/octoprint_snapshot.jpg
+          image: /local/sparkx_i7_early_snapshot.jpg
+        message: '{{ early_message }}'
+        title: 3D print early check
     - action: telegram_bot.send_photo
       data:
+        caption: '{{ early_message }}'
         entity_id: notify.franco
-        file: /config/www/octoprint_snapshot.jpg
+        file: /config/www/sparkx_i7_early_snapshot.jpg
-        caption: '{% set f = states(''sensor.octoprint_print_file'') %}{% set file
-          = ''No file'' if f in [''unknown'', ''unavailable'', ''none''] else f.replace(''.gcode'',
-          '''') %}{% set pct = states(''sensor.octoprint_print_progress'') | round(0)
-          | int(0) %}{% set es = states(''sensor.octoprint_elapsed'') | int(0) %}{%
-          set ts = states(''sensor.octoprint_time_left'') | int(0) %}{% set dt = states(''sensor.octoprint_approximate_completion_time'')
-          | as_datetime %}{% macro dur(s) -%}{%- if s >= 3600 -%}{{ (s // 3600) }}h
-          {{ ((s % 3600) // 60) }}m{%- else -%}{{ ((s % 3600) // 60) }}m{%- endif
-          -%}{%- endmacro %}{% if dt %}{% set fin = ''~'' + as_local(dt).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% elif ts > 0 %}{% set fin = ''~'' + (now() + timedelta(seconds=ts)).strftime(''%I:%M
-          %p'').lstrip(''0'') %}{% else %}{% set fin = ''unknown'' %}{% endif %}
-
-          {{ file }}
-
-          Progress: {{ pct }}% · Elapsed: {{ dur(es) }} · Left: {{ dur(ts) if ts >
-          0 else ''unknown'' }}
-
-          Est. finish: {{ fin }}'
         parse_mode: plain_text
   mode: single
 - id: '1787530101996'