automations.yaml, zigbee2mqtt/state.json

automations.yaml

@@ -3396,20 +3396,19 @@
         data: {}
 - id: '1786068561172'
   alias: 3D Printer Running - Playroom Light & Basement Heat
-  description: When the 3D printer running helper turns on (print started), set the
-    3D printer lights to bright white, turn on the bedroom lamp, set the basement
-    to 22 degrees C, and turn on the filter. When it turns off (print ended), set
-    the 3D printer lights to purple at 25% after 3 minutes, turn off the bedroom lamp
-    after 10 minutes, and turn off the filter after 1 hour.
+  description: When the 3D printer running helper turns on, turn on the SparkX i7
+    light and the bedroom lamp, set the basement to 22 degrees C, and turn on the
+    filter. When the helper turns off, turn the SparkX light off after 3 minutes,
+    turn off the bedroom lamp after 10 minutes, and turn off the filter after 1 hour.
   triggers:
-  - trigger: state
-    entity_id: input_boolean.3d_printer_running
-    to: 'on'
+  - entity_id: input_boolean.3d_printer_running
     id: printer_started
-  - trigger: state
-    entity_id: input_boolean.3d_printer_running
-    to: 'off'
+    to: 'on'
+    trigger: state
+  - entity_id: input_boolean.3d_printer_running
     id: printer_stopped
+    to: 'off'
+    trigger: state
   actions:
   - choose:
     - conditions:
@@ -3418,24 +3417,18 @@
       sequence:
       - action: light.turn_on
         target:
-          entity_id: light.3d_printer_lights_local
+          entity_id: light.sparkx_i7_light
+      - action: light.turn_on
         data:
           brightness_pct: 100
-          rgb_color:
-          - 255
-          - 255
-          - 255
-      - action: light.turn_on
         target:
           entity_id: light.bedroom_lamp_2
-        data:
-          brightness_pct: 100
       - action: climate.set_temperature
+        data:
+          hvac_mode: heat
+          temperature: 22
         target:
           entity_id: climate.basement
-        data:
-          temperature: 22
-          hvac_mode: heat
       - action: switch.turn_on
         target:
           entity_id: switch.filter
@@ -3447,15 +3440,9 @@
         - sequence:
           - delay:
               minutes: 3
-          - action: light.turn_on
+          - action: light.turn_off
             target:
-              entity_id: light.3d_printer_lights_local
-            data:
-              brightness_pct: 25
-              rgb_color:
-              - 128
-              - 0
-              - 128
+              entity_id: light.sparkx_i7_light
           - delay:
               minutes: 7
           - action: light.turn_off