3 files

.ha_mcp/backups/automation.1791477238729.20261015_132317.yaml

@@ -0,0 +1,171 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238729'
+captured: '2026-10-15T13:23:17.499559+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    slot, then sends a summary notification with total and per-slot breakdown whenever
+    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+    id: complete
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: stopped
+    id: stopped
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: error
+    id: error
+  conditions:
+  - condition: template
+    value_template: '{{ trigger.id == ''complete'' or states(''input_text.sparkx_i7_print_spool_latch'')
+      not in ['''', ''unknown'', ''unavailable''] }}'
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+      outcome: '{% set tid = trigger.id | default(''complete'') %}{{ ''cancelled''
+        if tid == ''stopped'' else (''error'' if tid == ''error'' else ''complete'')
+        }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
+        | default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
+        %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == ''''
+        %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{
+        ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split(''_'')[-1] if old_slot.split(''_'')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - if:
+      condition: template
+      value_template: '{{ trigger.id == ''complete'' }}'
+    then:
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_filament_weight
+      data:
+        value: '{{ summary_total }}'
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_cost
+      data:
+        value: '{{ ((summary_total | float) * (states(''input_number.filament_price_per_kg'')
+          | float(25)) / 1000) | round(2) }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/logs/mcp_usage.jsonl

@@ -4563,3 +4563,4 @@
 {"timestamp": "2026-10-15T13:22:39.599656+00:00", "tool_name": "ha_config_get_script", "parameters": {"script_id": "spoolman_set_spool_remaining"}, "execution_time_ms": 108.43968391418457, "success": true, "error_message": null, "response_size_bytes": 2239, "user_context": null}
 {"timestamp": "2026-10-15T13:22:39.822007+00:00", "tool_name": "ha_config_get_automation", "parameters": {"identifier": "1791477238762"}, "execution_time_ms": 334.63048934936523, "success": true, "error_message": null, "response_size_bytes": 5649, "user_context": null}
 {"timestamp": "2026-10-15T13:22:39.905414+00:00", "tool_name": "ha_config_get_automation", "parameters": {"identifier": "1791477238799"}, "execution_time_ms": 413.3596420288086, "success": true, "error_message": null, "response_size_bytes": 7574, "user_context": null}
+{"timestamp": "2026-10-15T13:23:18.159012+00:00", "tool_name": "ha_config_set_automation", "parameters": {"config": null, "identifier": "1791477238729", "python_transform": "_repl = [(\"matching the latched slot color\", \"matching the latched slot's CFS Lite location\"), (\"Spoolman: no spool for slot color\", \"Spoolman: no spool for the latched slot\"), (\"no Spoolman spool in the CFS Lite location with remaining weight matches that color. Register the new roll in Spoolman with location CFS Lite, then adjust manually if needed.\", \"no Spoolman spool with remaining weight is in that slot's CFS Lite location. Register the new roll in Spoolman in that location, then adjust manually if needed.\")]\nstack = [config]\nfor _ in range(20000):\n    if not stack:\n        break\n    node = stack.pop()\n    if isinstance(node, dict):\n        for k in list(node.keys()):\n            v = node[k]\n            if isinstance(v, str):\n                for a, b in _repl:\n                    if a in v:\n                        v = v.replace(a, b)\n                node[k] = v\n            elif isinstance(v, (dict, list)):\n                stack.append(v)\n    elif isinstance(node, list):\n        for i in range(len(node)):\n            v = node[i]\n            if isinstance(v, str):\n                for a, b in _repl:\n                    if a in v:\n                        v = v.replace(a, b)\n                node[i] = v\n            elif isinstance(v, (dict, list)):\n                stack.append(v)", "config_hash": "75d85b947ad8ec44", "take_control_of_blueprint": false, "category": null, "wait": true, "enabled": null, "run_actions": false, "MandatoryBPS": true, "BestPracticeKey": null}, "execution_time_ms": 622.8833198547363, "success": true, "error_message": null, "response_size_bytes": 83935, "user_context": null}

automations.yaml

@@ -4388,9 +4388,9 @@
   alias: SparkX i7 - Deduct filament in Spoolman on print complete
   description: On print completion, deducts the final segment (used_material_length
     delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
-    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    matching the latched slot's CFS Lite location (remaining weight > 0 guard), accumulates
-    slot, then sends a summary notification with total and per-slot breakdown whenever
+    it per slot, then sends a summary notification with total and per-slot breakdown
-    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    whenever anything was deducted. Silent when total is 0. Clears the latch and re-baselines
     the checkpoint.
   triggers:
   - trigger: state
@@ -4426,8 +4426,8 @@
         '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
   - variables:
       spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
-        %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'') |
+        %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
-        default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
+        | default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
         %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == ''''
         %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{
         ns.id }}'
@@ -4464,28 +4464,28 @@
       default:
       - action: notify.persistent_notification
         data:
-          title: 'Spoolman: no spool for slot color'
+          title: 'Spoolman: no spool for the latched slot'
           message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
             {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
-            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            upper }}) could not be deducted - no Spoolman spool with remaining weight
-            with remaining weight matches that color. Register the new roll in Spoolman
+            is in that slot''s CFS Lite location. Register the new roll in Spoolman
-            with location CFS Lite, then adjust manually if needed.'
+            in that location, then adjust manually if needed.'
       - action: notify.mobile_app_francos_ipad
         data:
-          title: 'Spoolman: no spool for slot color'
+          title: 'Spoolman: no spool for the latched slot'
           message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
             {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
-            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            upper }}) could not be deducted - no Spoolman spool with remaining weight
-            with remaining weight matches that color. Register the new roll in Spoolman
+            is in that slot''s CFS Lite location. Register the new roll in Spoolman
-            with location CFS Lite, then adjust manually if needed.'
+            in that location, then adjust manually if needed.'
       - action: notify.mobile_app_sm_f956w
         data:
-          title: 'Spoolman: no spool for slot color'
+          title: 'Spoolman: no spool for the latched slot'
           message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
             {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
-            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            upper }}) could not be deducted - no Spoolman spool with remaining weight
-            with remaining weight matches that color. Register the new roll in Spoolman
+            is in that slot''s CFS Lite location. Register the new roll in Spoolman
-            with location CFS Lite, then adjust manually if needed.'
+            in that location, then adjust manually if needed.'
   - variables:
       summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
         ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
@@ -4615,8 +4615,8 @@
           spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
             %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
             | default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
-            %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id ==
+            %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == ''''
-            '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor
+            %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor
             %}{{ ns.id }}'
       - if:
           condition: template
@@ -4772,106 +4772,219 @@
     target:
       entity_id: notify.franco
   mode: single
-
 - id: '1791477238799'
   alias: SparkX i7 - Filament sufficiency check at print start
-  description: >-
+  description: When a print starts and stays printing for 45 s, reports how much filament
-    When a print starts and stays printing for 45 s, reports how much filament the
+    the job needs, how much has already been used and how much is left, then compares
-    job needs, how much has already been used and how much is left, then compares
     the loaded CFS Lite spools against that. A single-colour job whose colour is in
-    a loaded slot is checked exactly against that slot's spool; otherwise the
+    a loaded slot is checked exactly against that slot's spool; otherwise the slicer
-    slicer gives no per-colour figure, so each loaded spool is compared against the
+    gives no per-colour figure, so each loaded spool is compared against the whole
-    whole job total. Always sends a notification.
+    job total. Always sends a notification.
   triggers:
   - trigger: state
     entity_id: sensor.sparkx_i7_print_status
     to: printing
-    for: '00:00:45'
+    for: 00:00:45
   conditions: []
   actions:
   - variables:
-      gcm: "{{ states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) }}"
+      gcm: '{{ states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298) }}'
-      length_cm: "{{ states('sensor.sparkx_i7_expected_material_length') | float(0) }}"
+      length_cm: '{{ states(''sensor.sparkx_i7_expected_material_length'') | float(0)
-      weight_g: "{{ states('sensor.sparkx_i7_expected_material_weight') | float(0) }}"
+        }}'
-      job_g: "{{ ((weight_g | float) if (weight_g | float) > 0 else (length_cm | float) * (gcm | float)) | round(1) }}"
+      weight_g: '{{ states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
-      used_len: "{{ states('sensor.sparkx_i7_used_material_length') | float(0) }}"
+        }}'
-      used_g: "{{ (((used_len | float) * (gcm | float)) | round(1)) }}"
+      job_g: '{{ ((weight_g | float) if (weight_g | float) > 0 else (length_cm | float)
-      gcode_file: "{{ state_attr('sensor.sparkx_i7_expected_material_length', 'gcode_file') | default('', true) }}"
+        * (gcm | float)) | round(1) }}'
+      used_len: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      used_g: '{{ (((used_len | float) * (gcm | float)) | round(1)) }}'
+      gcode_file: '{{ state_attr(''sensor.sparkx_i7_expected_material_length'', ''gcode_file'')
+        | default('''', true) }}'
   - variables:
-      report: |-
+      report: '{% set cols = namespace(list=[]) %}
-        {% set cols = namespace(list=[]) %}
+
-        {% for n in ['1','2','3','4'] %}{% set cc = states('sensor.sparkx_i7_cfs_box_1_slot_' ~ n ~ '_color') | replace('#','') | lower %}{% if cc not in ['','none','unknown','unavailable'] %}{% set cols.list = cols.list + [cc] %}{% endif %}{% endfor %}
+        {% for n in [''1'',''2'',''3'',''4''] %}{% set cc = states(''sensor.sparkx_i7_cfs_box_1_slot_''
+        ~ n ~ ''_color'') | replace(''#'','''') | lower %}{% if cc not in ['''',''none'',''unknown'',''unavailable'']
+        %}{% set cols.list = cols.list + [cc] %}{% endif %}{% endfor %}
+
         {% set gc = namespace(list=[]) %}
-        {% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color') | default('', true) | string).split(';') %}{% set q = p | replace('#','') | lower | trim %}{% if q not in ['','none','unknown','unavailable'] %}{% set gc.list = gc.list + [q] %}{% endif %}{% endfor %}
+
+        {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+        | default('''', true) | string).split('';'') %}{% set q = p | replace(''#'','''')
+        | lower | trim %}{% if q not in ['''',''none'',''unknown'',''unavailable'']
+        %}{% set gc.list = gc.list + [q] %}{% endif %}{% endfor %}
+
         {% set mc = namespace(list=[]) %}
-        {% for p in (state_attr('sensor.sparkx_i7_expected_material_length','material') | default('', true) | string).split(';') %}{% set q = p | trim %}{% if q not in ['','none','unknown','unavailable'] %}{% set mc.list = mc.list + [q] %}{% endif %}{% endfor %}
+
+        {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''material'')
+        | default('''', true) | string).split('';'') %}{% set q = p | trim %}{% if
+        q not in ['''',''none'',''unknown'',''unavailable''] %}{% set mc.list = mc.list
+        + [q] %}{% endif %}{% endfor %}
+
         {% set single = (gc.list | length) == 1 %}
-        {% set gcol = gc.list[0] if single else '' %}
+
-        {% set aslot = (states('sensor.sparkx_i7_active_filament_slot') | default('', true) | string).split('_')[-1] %}
+        {% set gcol = gc.list[0] if single else '''' %}
-        {% set aslot = aslot if aslot in ['1','2','3','4'] else '' %}
+
-        {% set rem_g = ([((job_g | float) - (used_g | float)), 0] | max) | round(1) %}
+        {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
-        {% set ns = namespace(cover=[], below=[], short=[], ok=[], missing=[], loaded=[], match_label='', match_rem=0) %}
+        true) | string).split(''_'')[-1] %}
-        {% for n in ['1','2','3','4'] %}
+
-        {% set c = states('sensor.sparkx_i7_cfs_box_1_slot_' ~ n ~ '_color') | replace('#','') | lower %}
+        {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
-        {% if c not in ['','none','unknown','unavailable'] %}
+
-        {% set cname = states('sensor.sparkx_i7_slot_' ~ n ~ '_color_name') %}
+        {% set rem_g = ([((job_g | float) - (used_g | float)), 0] | max) | round(1)
-        {% set flabel = states('sensor.sparkx_i7_cfs_box_1_slot_' ~ n ~ '_filament') %}
+        %}
-        {% set label = 'Slot ' ~ n ~ ' ' ~ (cname if cname not in ['','unknown','unavailable'] else (flabel if flabel not in ['','unknown','unavailable'] else ('#' ~ (c | upper)))) %}
+
-        {% set sp = namespace(id='', rem=0, fw=0) %}
+        {% set ns = namespace(cover=[], below=[], short=[], ok=[], missing=[], loaded=[],
-        {% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}
+        match_label='''', match_rem=0) %}
-        {% if sp.id == '' and (state_attr(e[:-10],'location') | default('', true) | lower) == ('cfs lite ' ~ n) %}
+
+        {% for n in [''1'',''2'',''3'',''4''] %}
+
+        {% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_'' ~ n ~ ''_color'') |
+        replace(''#'','''') | lower %}
+
+        {% if c not in ['''',''none'',''unknown'',''unavailable''] %}
+
+        {% set cname = states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') %}
+
+        {% set flabel = states(''sensor.sparkx_i7_cfs_box_1_slot_'' ~ n ~ ''_filament'')
+        %}
+
+        {% set label = ''Slot '' ~ n ~ '' '' ~ (cname if cname not in ['''',''unknown'',''unavailable'']
+        else (flabel if flabel not in ['''',''unknown'',''unavailable''] else (''#''
+        ~ (c | upper)))) %}
+
+        {% set sp = namespace(id='''', rem=0, fw=0) %}
+
+        {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+        %}
+
+        {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+        true) | lower) == (''cfs lite '' ~ n) %}
+
         {% set sp.id = e[:-10] %}
+
         {% set sp.rem = states(e[:-10]) | float(0) %}
-        {% set sp.fw = state_attr(e[:-10],'filament_weight') | float(0) %}
+
+        {% set sp.fw = state_attr(e[:-10],''filament_weight'') | float(0) %}
+
         {% endif %}
+
         {% endfor %}
-        {% set pct = ((((sp.rem | float) / (sp.fw | float)) * 100) | round(0) | int) if (sp.fw | float) > 0 else 0 %}
+
-        {% if sp.id != '' %}{% set ns.loaded = ns.loaded + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%)'] %}{% endif %}
+        {% set pct = ((((sp.rem | float) / (sp.fw | float)) * 100) | round(0) | int)
-        {% if sp.id != '' and single and n == aslot %}{% set ns.match_label = label %}{% set ns.match_rem = sp.rem %}{% endif %}
+        if (sp.fw | float) > 0 else 0 %}
-        {% if sp.id != '' %}
+
+        {% if sp.id != '''' %}{% set ns.loaded = ns.loaded + [label ~ '': '' ~ (sp.rem
+        | round(1)) ~ '' g ('' ~ pct ~ ''%)''] %}{% endif %}
+
+        {% if sp.id != '''' and single and n == aslot %}{% set ns.match_label = label
+        %}{% set ns.match_rem = sp.rem %}{% endif %}
+
+        {% if sp.id != '''' %}
+
         {% if single and n == aslot %}
-        {% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g ~ ' g needed'] %}
+
-        {% else %}{% set ns.ok = ns.ok + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g ~ ' g needed'] %}{% endif %}
+        {% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short + [label
+        ~ '': '' ~ (sp.rem | round(1)) ~ '' g ('' ~ pct ~ ''%) left, '' ~ job_g ~
+        '' g needed''] %}
+
+        {% else %}{% set ns.ok = ns.ok + [label ~ '': '' ~ (sp.rem | round(1)) ~ ''
+        g ('' ~ pct ~ ''%) left, '' ~ job_g ~ '' g needed''] %}{% endif %}
+
         {% elif single %}
-        {% if (sp.rem | float) >= (job_g | float) %}{% set ns.cover = ns.cover + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%)'] %}
+
-        {% else %}{% set ns.below = ns.below + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%)'] %}{% endif %}
+        {% if (sp.rem | float) >= (job_g | float) %}{% set ns.cover = ns.cover + [label
+        ~ '': '' ~ (sp.rem | round(1)) ~ '' g ('' ~ pct ~ ''%)''] %}
+
+        {% else %}{% set ns.below = ns.below + [label ~ '': '' ~ (sp.rem | round(1))
+        ~ '' g ('' ~ pct ~ ''%)''] %}{% endif %}
+
         {% else %}
-        {% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, up to ' ~ job_g ~ ' g needed'] %}
+
-        {% else %}{% set ns.ok = ns.ok + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, up to ' ~ job_g ~ ' g needed'] %}{% endif %}
+        {% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short + [label
+        ~ '': '' ~ (sp.rem | round(1)) ~ '' g ('' ~ pct ~ ''%) left, up to '' ~ job_g
+        ~ '' g needed''] %}
+
+        {% else %}{% set ns.ok = ns.ok + [label ~ '': '' ~ (sp.rem | round(1)) ~ ''
+        g ('' ~ pct ~ ''%) left, up to '' ~ job_g ~ '' g needed''] %}{% endif %}
+
         {% endif %}
+
         {% elif job_g > 0 %}
-        {% set ns.missing = ns.missing + [label ~ ' (#' ~ (c | upper) ~ ')'] %}
+
+        {% set ns.missing = ns.missing + [label ~ '' (#'' ~ (c | upper) ~ '')''] %}
+
         {% endif %}
+
         {% endif %}
+
         {% endfor %}
-        Job: {{ gcode_file if gcode_file not in ['','unknown','unavailable'] else (state_attr('sensor.sparkx_i7_print_status','file') | default('', true) | string).split('/')[-1] }}
+
-        Needs {{ job_g | round(1) }} g ({{ length_cm | round(1) }} cm) · used {{ used_g }} g · {{ rem_g }} g left to print
+        Job: {{ gcode_file if gcode_file not in ['''',''unknown'',''unavailable'']
-        Slicer: {{ (mc.list | join(', ')) if mc.list else 'material unknown' }} · {{ ('single colour #' ~ (gcol | upper)) if single else ((gc.list | length) ~ ' colours') }}
+        else (state_attr(''sensor.sparkx_i7_print_status'',''file'') | default('''',
-        {% if job_g <= 0 %}Cannot verify: slicer filament estimate not available yet.{% if ns.loaded %}
+        true) | string).split(''/'')[-1] }}
+
+        Needs {{ job_g | round(1) }} g ({{ length_cm | round(1) }} cm) · used {{ used_g
+        }} g · {{ rem_g }} g left to print
+
+        Slicer: {{ (mc.list | join('', '')) if mc.list else ''material unknown'' }}
+        · {{ (''single colour #'' ~ (gcol | upper)) if single else ((gc.list | length)
+        ~ '' colours'') }}
+
+        {% if job_g <= 0 %}Cannot verify: slicer filament estimate not available yet.{%
+        if ns.loaded %}
+
         Loaded:
-        - {{ ns.loaded | join('\n- ') }}{% endif %}
+
-        {% elif single and aslot != '' %}
+        - {{ ns.loaded | join(''\n- '') }}{% endif %}
+
+        {% elif single and aslot != '''' %}
+
         {% if ns.short %}NOT ENOUGH filament:
-        - {{ ns.short | join('\n- ') }}
+
-        {% elif ns.match_label %}Enough filament: {{ ns.match_label }}: {{ ns.match_rem | round(1) }} g left, {{ job_g }} g needed.
+        - {{ ns.short | join(''\n- '') }}
-        {% else %}Active slot {{ aslot }} has no Spoolman spool at CFS Lite, so remaining cannot be checked.{% endif %}
+
-        {% elif single %}No exact colour match for the print colour #{{ gcol | upper }} in a loaded CFS slot, so the exact spool cannot be identified.{% if ns.cover %}
+        {% elif ns.match_label %}Enough filament: {{ ns.match_label }}: {{ ns.match_rem
+        | round(1) }} g left, {{ job_g }} g needed.
+
+        {% else %}Active slot {{ aslot }} has no Spoolman spool at CFS Lite, so remaining
+        cannot be checked.{% endif %}
+
+        {% elif single %}No exact colour match for the print colour #{{ gcol | upper
+        }} in a loaded CFS slot, so the exact spool cannot be identified.{% if ns.cover
+        %}
+
         Would cover {{ job_g }} g:
-        - {{ ns.cover | join('\n- ') }}{% endif %}{% if ns.below %}
+
+        - {{ ns.cover | join(''\n- '') }}{% endif %}{% if ns.below %}
+
         Below {{ job_g }} g:
-        - {{ ns.below | join('\n- ') }}{% endif %}{% if not ns.cover and not ns.below %}
+
+        - {{ ns.below | join(''\n- '') }}{% endif %}{% if not ns.cover and not ns.below
+        %}
+
         No loaded CFS slot has a matching Spoolman spool to compare.{% endif %}
+
         {% elif ns.short %}NOT ENOUGH filament - possible shortfall:
-        - {{ ns.short | join('\n- ') }}{% if ns.ok %}
+
+        - {{ ns.short | join(''\n- '') }}{% if ns.ok %}
+
         OK (would still cover the whole job):
-        - {{ ns.ok | join('\n- ') }}{% endif %}{% if ns.missing %}
+
+        - {{ ns.ok | join(''\n- '') }}{% endif %}{% if ns.missing %}
+
         No Spoolman spool matched for:
-        - {{ ns.missing | join('\n- ') }}{% endif %}
+
+        - {{ ns.missing | join(''\n- '') }}{% endif %}
+
         {% elif ns.ok %}Enough filament:
-        - {{ ns.ok | join('\n- ') }}{% if ns.missing %}
+
+        - {{ ns.ok | join(''\n- '') }}{% if ns.missing %}
+
         No Spoolman spool matched for:
-        - {{ ns.missing | join('\n- ') }}{% endif %}
+
-        {% elif ns.missing %}Could not match any loaded CFS slot to a Spoolman spool.{% endif %}
+        - {{ ns.missing | join(''\n- '') }}{% endif %}
+
+        {% elif ns.missing %}Could not match any loaded CFS slot to a Spoolman spool.{%
+        endif %}'
   - action: notify.persistent_notification
     data:
       title: Print started - filament check