4 files

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_140314.yaml

@@ -0,0 +1,428 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T14:03:14.258687+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap {\n      \
+            \  display: flex;\n        flex-direction: column;\n        align-items:\
+            \ center;\n        width: 100%;\n      }\n      .tube-bg {\n        position:\
+            \ relative;\n        width: 60px;\n        height: 180px;\n        background-color:\
+            \ #dedede;\n        border-radius: 20px;\n        overflow: hidden;\n\
+            \        border: 1px solid \" ~ v.border ~ \";\n        display: flex;\n\
+            \        flex-direction: column;\n        justify-content: flex-end;\n\
+            \      }\n      .tube-empty {\n        background: transparent;\n    \
+            \    border: 2px dashed var(--error-color);\n      }\n      .tube-fill\
+            \ {\n        width: 100%;\n        border-radius: 0 0 19px 19px;\n   \
+            \   }\n      .tube-text {\n        position: absolute;\n        top: 48%;\n\
+            \        left: 50%;\n        transform: translate(-50%, -50%);\n     \
+            \   font-size: 13px;\n        font-weight: 800;\n        color: \" ~ v.text\
+            \ ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo\
+            \ ~ \";\n        pointer-events: none;\n        z-index: 2;\n        white-space:\
+            \ nowrap;\n      }\n      .slot-label {\n        margin-top: 8px;\n  \
+            \      font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n      .warn-low\
+            \ .tube-bg {\n        background-color: #fff6df;\n        outline: 2px\
+            \ solid var(--warning-color);\n      }\n      .warn-low .slot-label {\n\
+            \        color: var(--warning-color);\n      }\n      .warn-crit .tube-bg\
+            \ {\n        background-color: #fdecea;\n        outline: 2px solid var(--error-color);\n\
+            \      }\n      .warn-crit .slot-label {\n        color: var(--error-color);\n\
+            \      }\n    \",\n    \"tap_action\": {\n      \"action\": \"more-info\"\
+            \ if sp.ent != '' else \"none\"\n    }\n  } %}\n\n  {% set ns.cards =\
+            \ ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections