opencode/decisions.yaml, zigbee2mqtt/state.json

opencode/decisions.yaml

@@ -1018,3 +1018,26 @@ notes:
       - spoolman
     pin: true
     status: active
+  - id: 2026-10-12-sparkx-i7-cancel-error-deduct-filament
+    date: 2026-10-12
+    title: SparkX i7 cancel/error deduct filament but leave last-job helpers
+    decision: SparkX i7 cancellation (stopped) and error prints now also deduct the used
+      filament from Spoolman, not just completed ones. Cancel/error intentionally do NOT
+      update input_number.sparkx_i7_last_job_filament_weight / _last_job_cost — those stay
+      on the last completed print (dashboard "last job" cards).
+    rationale: "The cancel path is printing → processing → stopped, so the old from: printing
+      trigger never fired and the pending filament was never deducted. The new
+      stopped/error triggers are gated on a non-empty latch so they only run for a real
+      in-progress print. Last-job helpers were deliberately left complete-only (option A)
+      so the idle dashboard cards keep meaning the last completed print rather than a
+      partial cancelled one."
+    entities:
+      - input_number.sparkx_i7_last_job_filament_weight
+      - input_number.sparkx_i7_last_job_cost
+      - input_text.sparkx_i7_print_spool_latch
+      - input_number.sparkx_i7_slot_1_grams
+    files:
+      - automations.yaml
+    integrations:
+      - spoolman
+    status: active

zigbee2mqtt/state.json

@@ -4,7 +4,7 @@
         "state": "ON",
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 121.6,
+        "voltage": 121.7,
         "countdown_to_turn_on": 0,
         "ac_frequency": 60,
         "power_factor": 0.13,
@@ -27,7 +27,7 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "power": 1.9,
+        "power": 2,
         "current": 0.1,
         "energy": 54.9,
         "power_factor": 0.16,
@@ -45,10 +45,10 @@
         "state": "ON",
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 121.8,
+        "voltage": 121.7,
         "countdown_to_turn_on": 0,
         "energy": 106.57,
-        "power_factor": 0.2,
+        "power_factor": 0.3,
         "ac_frequency": 60,
         "update": {
             "state": "idle",
@@ -74,13 +74,13 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 119.9,
+        "voltage": 120,
         "state": "ON",
         "ac_frequency": 60,
         "energy": 216.6,
-        "power": 94.9,
+        "power": 1.6,
-        "current": 0.84,
+        "current": 0.05,
-        "power_factor": 0.94,
+        "power_factor": 0.38,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -98,7 +98,7 @@
         "voltage": 121.9,
         "energy": 102.22,
         "state": "ON",
-        "power": 26.6,
+        "power": 24.3,
         "current": 0.36,
         "ac_frequency": 60,
         "power_factor": 0.7,
@@ -114,12 +114,12 @@
     },
     "0xffffb40e060895b3": {
         "state": "ON",
-        "voltage": 121.4,
+        "voltage": 121.8,
         "ac_frequency": 60,
         "energy": 14.92,
         "current": 0.02,
         "power": 0.1,
-        "power_factor": 0.11,
+        "power_factor": 0.22,
         "linkquality": 116,
         "update": {
             "state": "idle",
@@ -136,7 +136,7 @@
     "0xffffb40e0608864e": {
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
-        "voltage": 121.2,
+        "voltage": 121.9,
         "energy": 36.31,
         "countdown_to_turn_on": 0,
         "state": "ON",
@@ -171,7 +171,7 @@
     },
     "0xa4c1380d0679ffff": {
         "battery": 100,
-        "temperature": 17.7,
+        "temperature": 17.8,
         "temperature_units": "celsius",
         "temperature_calibration": 0,
         "update": {