{
  "config": {
    "step": {
      "user": {
        "title": "WashData Setup",
        "description": "Configure your washing machine or other appliance.\n\nPower sensor is required.\n\n**Next, you will be asked if you want to create your first profile.**",
        "data": {
          "name": "Device Name",
          "device_type": "Device Type",
          "power_sensor": "Power Sensor",
          "min_power": "Minimum Power Threshold (W)"
        },
        "data_description": {
          "name": "A friendly name for this device (e.g., 'Washing Machine', 'Dishwasher').",
          "device_type": "What type of appliance is this? Helps tailor detection and labeling.",
          "power_sensor": "The sensor entity that reports real-time power consumption (in watts) from your smart plug.",
          "min_power": "Power readings above this threshold (in watts) indicate the appliance is running. Start with 2W for most devices."
        }
      },
      "first_profile": {
        "title": "Create First Profile",
        "description": "A **Cycle** is a complete run of your appliance (e.g., a load of laundry). A **Profile** groups these cycles by type (e.g., 'Cotton', 'Quick Wash'). Creating a profile now helps the integration estimate duration immediately.\n\nYou can manually select this profile in the device controls if it's not detected automatically.\n\n**Leave 'Profile Name' empty to skip this step.**",
        "data": {
          "profile_name": "Profile Name (Optional)",
          "manual_duration": "Estimated Duration (minutes)"
        }
      },
      "reconfigure": {
        "title": "Reconfigure WashData",
        "description": "Update the device name, appliance type, or power sensor.",
        "data": {
          "name": "Device Name",
          "device_type": "Device Type",
          "power_sensor": "Power Sensor",
          "min_power": "Minimum Power Threshold (W)"
        }
      }
    },
    "error": {
      "cannot_connect": "Failed to connect",
      "invalid_auth": "Invalid authentication",
      "unknown": "Unexpected error",
      "invalid_power": "Power threshold must be greater than 0"
    },
    "abort": {
      "already_configured": "Device is already configured",
      "reconfigure_successful": "Reconfiguration was successful"
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "WashData Settings",
        "description": "Rename the device or change its core hardware settings. All detection, matching and notification settings are in the WashData panel.",
        "data": {
          "name": "Device Name",
          "device_type": "Device Type",
          "power_sensor": "Power Sensor",
          "min_power": "Minimum Power Threshold (W)"
        }
      }
    },
    "error": {
      "invalid_power": "Power threshold must be greater than 0",
      "timer_default_message": "{device}: {minutes} min timer",
      "timer_pause_action_title": "Resume Cycle",
      "timer_pause_body_suffix": "The cycle is paused. Open the WashData panel to resume.",
      "vs_typical_longer": "{pct}% longer than usual",
      "vs_typical_shorter": "{pct}% shorter than usual",
      "notify_live_waiting_message": "{device}: No profile matched yet."
    }
  },
  "selector": {
    "device_type": {
      "options": {
        "washing_machine": "Washing Machine",
        "dryer": "Dryer",
        "washer_dryer": "Washer-Dryer Combo",
        "dishwasher": "Dishwasher",
        "air_fryer": "Air Fryer",
        "bread_maker": "Bread Maker",
        "pump": "Pump / Sump Pump",
        "generic": "Other (Advanced)",
        "other": "Threshold Device"
      }
    }
  },
  "services": {
    "label_cycle": {
      "name": "Label Cycle",
      "description": "Assign an existing profile to a past cycle, or remove the label.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to label."
        },
        "cycle_id": {
          "name": "Cycle ID",
          "description": "The ID of the cycle to label."
        },
        "profile_name": {
          "name": "Profile Name",
          "description": "The name of an existing profile (create profiles in Manage Profiles menu). Leave blank to remove label."
        }
      }
    },
    "create_profile": {
      "name": "Create Profile",
      "description": "Create a new profile (standalone or based on a reference cycle).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device."
        },
        "profile_name": {
          "name": "Profile Name",
          "description": "Name for the new profile (e.g. 'Heavy Duty', 'Delicates')."
        },
        "reference_cycle_id": {
          "name": "Reference Cycle ID",
          "description": "Optional cycle ID to base this profile on."
        }
      }
    },
    "delete_profile": {
      "name": "Delete Profile",
      "description": "Delete a profile and optionally unlabel cycles using it.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device."
        },
        "profile_name": {
          "name": "Profile Name",
          "description": "The profile to delete."
        },
        "unlabel_cycles": {
          "name": "Unlabel Cycles",
          "description": "Remove profile label from cycles using this profile."
        }
      }
    },
    "auto_label_cycles": {
      "name": "Auto-Label Old Cycles",
      "description": "Retroactively label unlabeled cycles using profile matching.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device."
        },
        "confidence_threshold": {
          "name": "Confidence Threshold",
          "description": "Minimum match confidence (0.50-0.95) to apply labels."
        }
      }
    },
    "export_config": {
      "name": "Export Config",
      "description": "Export this device's profiles, cycles, and settings to a JSON file (per device).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to export."
        },
        "path": {
          "name": "Path",
          "description": "Optional absolute file path to write (defaults to /config/ha_washdata_export_{entry}.json)."
        }
      }
    },
    "import_config": {
      "name": "Import Config",
      "description": "Import profiles, cycles, and settings for this device from a JSON export file (settings may be overwritten).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to import into."
        },
        "path": {
          "name": "Path",
          "description": "Absolute path to the export JSON file to import."
        }
      }
    },
    "submit_cycle_feedback": {
      "name": "Submit Cycle Feedback",
      "description": "Confirm or correct an auto-detected program after a completed cycle. Provide either `entry_id` (advanced) or `device_id` (recommended).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device (recommended instead of entry_id)."
        },
        "entry_id": {
          "name": "Entry ID",
          "description": "The config entry id for the device (alternative to device_id)."
        },
        "cycle_id": {
          "name": "Cycle ID",
          "description": "The cycle id shown in the feedback notification / logs."
        },
        "user_confirmed": {
          "name": "Confirm Detected Program",
          "description": "Set true if the detected program is correct."
        },
        "corrected_profile": {
          "name": "Corrected Profile",
          "description": "If not confirmed, provide the correct profile/program name."
        },
        "corrected_duration": {
          "name": "Corrected Duration (seconds)",
          "description": "Optional corrected duration in seconds."
        },
        "notes": {
          "name": "Notes",
          "description": "Optional notes about this cycle."
        }
      }
    },
    "record_start": {
      "name": "Record Cycle Start",
      "description": "Start manually recording a clean cycle (bypasses all matching logic).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to record."
        }
      }
    },
    "record_stop": {
      "name": "Record Cycle Stop",
      "description": "Stop manual recording.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to stop recording."
        }
      }
    },
    "trim_cycle": {
      "name": "Trim Cycle",
      "description": "Trim the power data of a past cycle to a specific time window.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device."
        },
        "cycle_id": {
          "name": "Cycle ID",
          "description": "The ID of the cycle to trim."
        },
        "trim_start_s": {
          "name": "Trim Start (seconds)",
          "description": "Keep data from this offset in seconds. Default 0."
        },
        "trim_end_s": {
          "name": "Trim End (seconds)",
          "description": "Keep data up to this offset in seconds. Default = full duration."
        }
      }
    },
    "pause_cycle": {
      "name": "Pause Cycle",
      "description": "Pause the active cycle for a WashData device.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to pause."
        }
      }
    },
    "resume_cycle": {
      "name": "Resume Cycle",
      "description": "Resume a paused cycle for a WashData device.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to resume."
        }
      }
    },
    "trigger_ml_training": {
      "name": "Trigger ML Training",
      "description": "Manually retrain the on-device ML models from this device's own labelled cycles (experimental).",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The WashData device to retrain models for."
        }
      }
    }
  },
  "entity": {
    "binary_sensor": {
      "running": {
        "name": "Running"
      },
      "match_ambiguity": {
        "name": "Match Ambiguity"
      }
    },
    "sensor": {
      "washer_state": {
        "name": "State",
        "state": {
          "off": "Off",
          "idle": "Idle",
          "starting": "Starting",
          "running": "Running",
          "paused": "Paused",
          "user_paused": "Paused by user",
          "ending": "Ending",
          "finished": "Finished",
          "anti_wrinkle": "Anti-Wrinkle",
          "interrupted": "Interrupted",
          "force_stopped": "Force Stopped",
          "rinse": "Rinse",
          "unknown": "Unknown",
          "clean": "Clean",
          "delay_wait": "Delay Start"
        }
      },
      "washer_program": {
        "name": "Program"
      },
      "time_remaining": {
        "name": "Time Remaining"
      },
      "total_duration": {
        "name": "Total Duration"
      },
      "cycle_progress": {
        "name": "Progress"
      },
      "current_power": {
        "name": "Current Power"
      },
      "elapsed_time": {
        "name": "Elapsed Time"
      },
      "debug_info": {
        "name": "Debug Info"
      },
      "match_confidence": {
        "name": "Match Confidence"
      },
      "top_candidates": {
        "name": "Top Candidates",
        "state": {
          "none": "None"
        }
      },
      "ambiguity": {
        "name": "Ambiguity Score"
      },
      "current_phase": {
        "name": "Current Phase"
      },
      "profile_cycle_count": {
        "name": "Profile {profile_name} Count",
        "unit_of_measurement": "cycles"
      },
      "suggestions": {
        "name": "Suggested Settings Available"
      },
      "pump_runs_today": {
        "name": "Pump Runs (Last 24 h)"
      },
      "cycle_count": {
        "name": "Cycle Count"
      },
      "energy_total": {
        "name": "Energy Total"
      }
    },
    "select": {
      "program_select": {
        "name": "Cycle Program",
        "state": {
          "auto_detect": "Auto-Detect"
        }
      }
    },
    "button": {
      "force_end_cycle": {
        "name": "Force End Cycle"
      },
      "pause_cycle": {
        "name": "Pause Cycle"
      },
      "resume_cycle": {
        "name": "Resume Cycle"
      },
      "record_start": {
        "name": "Record Cycle Start"
      },
      "record_stop": {
        "name": "Record Cycle Stop"
      }
    }
  },
  "exceptions": {
    "device_id_required": {
      "message": "A valid device_id is required."
    },
    "cycle_id_required": {
      "message": "A valid cycle_id is required."
    },
    "profile_name_required": {
      "message": "A valid profile_name is required."
    },
    "device_not_found": {
      "message": "Device not found."
    },
    "no_config_entry": {
      "message": "No config entry found for device."
    },
    "integration_not_loaded": {
      "message": "Integration not loaded for this device."
    },
    "cycle_not_found_or_no_power": {
      "message": "Cycle not found or has no power data."
    },
    "trim_failed_empty_window": {
      "message": "Trim failed - cycle not found, no power data, or resulting window is empty."
    },
    "trim_invalid_range": {
      "message": "trim_end_s must be greater than trim_start_s."
    },
    "no_active_cycle": {
      "message": "No active cycle to pause or resume."
    },
    "path_not_allowed": {
      "message": "Path is not allowed: {path}. Add its directory to 'allowlist_external_dirs' in configuration.yaml."
    },
    "export_path_exists": {
      "message": "Export target already exists: {path}. Choose a different path or remove the existing file first."
    },
    "export_write_failed": {
      "message": "Could not write export to {path}: {error}"
    },
    "create_profile_failed": {
      "message": "Could not create profile: {error}"
    },
    "assign_profile_failed": {
      "message": "Could not assign profile: {error}"
    }
  }
}