HomeAssistantVS/custom_components/ha_creality_ws/strings.json

{
  "config": {
    "step": {
      "user": {
        "title": "Connect to Creality Printer",
        "description": "Enter the IP address of your Creality K-series printer. The printer must be unlocked (root access not required) and on the same network.",
        "data": {
          "host": "IP Address",
          "name": "Friendly Name"
        }
      }
    },
    "error": {
      "cannot_connect": "Failed to connect to printer. Ensure IP is correct and printer is ON.",
      "not_K": "Connection refused or not a supported Creality K-series printer.",
      "already_configured": "This printer is already configured."
    },
    "abort": {
      "already_configured": "Device is already configured",
      "cannot_connect": "Failed to connect",
      "not_K": "Not a K-series printer"
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "Printer Configuration",
        "description": "Choose a settings group to edit. Each group opens its own page so its options always load fresh.",
        "menu_options": {
          "camera": "Camera",
          "notifications": "Notifications",
          "power": "Power switch",
          "connection": "Connection & performance",
          "save": "Save and apply"
        }
      },
      "camera": {
        "title": "Camera",
        "description": "{camera_help}",
        "data": {
          "camera_mode": "Camera Streaming Mode",
          "go2rtc_url": "External go2rtc Host/URL (if needed)",
          "go2rtc_port": "External go2rtc Port",
          "custom_camera_url": "Custom Camera URL (http(s) MJPEG/snapshot or rtsp://)"
        }
      },
      "notifications": {
        "title": "Notifications",
        "data": {
          "notify_device": "Notification Device",
          "notify_completed": "Notify when Completed",
          "notify_error": "Notify on Error",
          "notify_minutes_to_end": "Notify before Completion",
          "minutes_to_end_value": "Minutes before Completion"
        }
      },
      "power": {
        "title": "Power switch",
        "description": "{power_help}",
        "data": {
          "power_switch_enabled": "Enable Power Switch Detection",
          "power_switch": "Power Switch Entity"
        }
      },
      "connection": {
        "title": "Connection & performance",
        "data": {
          "host": "Printer IP Address",
          "polling_rate": "Polling Rate (seconds, 0 = real-time)"
        }
      }
    },
    "error": {
      "invalid_camera_url": "Enter a full URL including the scheme, e.g. http://192.168.1.50:8080/?action=stream or rtsp://192.168.1.50:554/stream."
    }
  },
  "entity": {
    "sensor": {
      "bed_temperature": { "name": "Bed Temperature" },
      "chamber_temperature": { "name": "Chamber Temperature" },
      "nozzle_temperature": { "name": "Nozzle Temperature" },
      "print_progress": { "name": "Print Progress" },
      "total_layers": { "name": "Total Layers" },
      "current_layer": { "name": "Working Layer" },
      "position_x": { "name": "Position X" },
      "position_y": { "name": "Position Y" },
      "position_z": { "name": "Position Z" },
      "feedrate_pct": { "name": "Print Speed" },
      "flowrate_pct": { "name": "Flow Rate" },
      "system": { "name": "System" },
      "model_info": { "name": "Model" },
      "filament_status": {
        "name": "Filament Status",
        "state": {
          "normal": "Normal",
          "runout": "Filament Runout",
          "unknown": "Unknown"
        }
      },
      "print_status": {
        "name": "Print Status",
        "state": {
          "off": "Off",
          "unknown": "Unknown",
          "error": "Error",
          "self-testing": "Self-Testing",
          "completed": "Completed",
          "paused": "Paused",
          "stopped": "Stopped",
          "printing": "Printing",
          "processing": "Processing",
          "idle": "Idle"
        }
      },
      "used_material_length": { "name": "Used Material Length" },
      "print_job_time": { "name": "Print Job Time" },
      "print_left_time": { "name": "Print Time Left" },
      "real_time_flow": { "name": "Real-Time Flow" },
      "current_object": { "name": "Current Object" },
      "object_count": { "name": "Object Count" },
      "print_control": {
        "name": "Print Control",
        "state": {
          "queued": "Queued",
          "ok": "OK",
          "unknown": "Unknown"
        }
      },
      "max_nozzle_temp": { "name": "Max Nozzle Temperature" },
      "max_bed_temp": { "name": "Max Bed Temperature" },
      "max_chamber_temp": { "name": "Max Chamber Temperature" },
      "active_filament_slot": { "name": "Active Filament Slot" },
      "cfs_box_temp": { "name": "CFS Box {box_id} Temperature" },
      "cfs_box_humidity": { "name": "CFS Box {box_id} Humidity" },
      "cfs_slot_filament": { "name": "CFS Box {box_id} Slot {slot} Filament" },
      "cfs_slot_color": { "name": "CFS Box {box_id} Slot {slot} Color" },
      "cfs_slot_percent": { "name": "CFS Box {box_id} Slot {slot} Remaining" },
      "cfs_ext_filament": { "name": "CFS External Filament" },
      "cfs_ext_color": { "name": "CFS External Color" },
      "cfs_ext_percent": { "name": "CFS External Remaining" }
    },
    "button": {
      "home_xyz": { "name": "Home (XY then Z)" },
      "pause_print": { "name": "Pause Print" },
      "resume_print": { "name": "Resume Print" },
      "stop_print": { "name": "Stop Print" },
      "reconnect": { "name": "Reconnect" }
    },
    "number": {
      "print_tuning_pct": { "name": "Print Tuning" },
      "nozzle_target": { "name": "Nozzle Target" },
      "bed_target": { "name": "Bed Target" },
      "chamber_target": { "name": "Chamber Target" },
      "model_fan_pct": { "name": "Model Fan" },
      "case_fan_pct": { "name": "Case Fan" },
      "side_fan_pct": { "name": "Side Fan" }
    },
    "fan": {
      "model_fan": { "name": "Model Fan" },
      "case_fan": { "name": "Case Fan" },
      "side_fan": { "name": "Side Fan" }
    },
    "light": {
      "light": { "name": "Light" }
    },
    "switch": {
      "light": { "name": "Light" }
    },
    "camera": {
      "printer_camera": { "name": "Printer Camera" }
    },
    "image": {
      "current_print_preview": { "name": "Current Print Preview" }
    }
  },
  "services": {
    "diagnostic_dump": {
      "name": "Diagnostic Dump",
      "description": "Dump all WebSocket telemetry data from connected Creality printers to JSON format for troubleshooting and analysis.",
      "fields": {
        "include_sensitive_data": {
          "name": "Include Sensitive Data",
          "description": "Whether to include potentially sensitive data in the diagnostic output (currently unused, reserved for future use)"
        }
      }
    },
    "request_cfs_info": {
      "name": "Request CFS Info",
      "description": "Manually request the printer to send the latest CFS (multifilament) information including temperatures, humidity, and filament details.",
      "fields": {
        "device_id": {
          "name": "Device",
          "description": "The printer(s) to request info from. If omitted, all connected printers will be queried."
        }
      }
    }
  }
}