3 files

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_175027.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T17:50:27.997890+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: numeric_state
+    entity_id: sensor.sparkx_i7_filament_weight_estimated
+    above: 0
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

automations.yaml

@@ -4376,53 +4376,135 @@
       | int }}'
 - id: '1791477238729'
   alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool matching the latched
+    slot color (remaining weight > 0 guard), accumulates it per slot, then sends a
+    summary notification with total and per-slot breakdown whenever anything was deducted.
+    Silent when total is 0. Clears the latch and re-baselines the checkpoint.
   triggers:
   - trigger: state
     entity_id: sensor.sparkx_i7_print_status
     from: printing
     to: completed
-  conditions:
-  - condition: numeric_state
-    entity_id: sensor.sparkx_i7_filament_weight_estimated
-    above: 0
+  conditions: []
   actions:
   - variables:
-      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
-        }}'
-      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
-  - choose:
-    - conditions:
-        condition: template
-        value_template: '{{ spool_id > 0 }}'
-      sequence:
-      - action: spoolman.use_spool_filament
-        data:
-          id: '{{ spool_id | int(0) }}'
-          use_weight: '{{ weight | float(0) }}'
-      - action: input_text.set_value
-        target:
-          entity_id: input_text.sparkx_i7_print_spool_latch
-        data:
-          value: ''
-    - conditions:
-        condition: template
-        value_template: '{{ spool_id <= 0 }}'
-      sequence:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and
+        ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{%
+        endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
       - action: notify.persistent_notification
         data:
-          title: Spoolman deduction skipped
-          message: 'Print completed: {{ weight }} g used, but no Spoolman spool was
-            latched for this print — nothing deducted.'
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
       - action: notify.mobile_app_francos_ipad
         data:
-          title: Spoolman deduction skipped
-          message: 'Print completed: {{ weight }} g used, but no Spoolman spool was
-            latched for this print — nothing deducted.'
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
       - action: notify.mobile_app_sm_f956w
         data:
-          title: Spoolman deduction skipped
-          message: 'Print completed: {{ weight }} g used, but no Spoolman spool was
-            latched for this print — nothing deducted.'
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
   mode: single
 - id: '1791477238762'
   alias: SparkX i7 - Latch print spool for Spoolman