automations.yaml, zigbee2mqtt/state.json

automations.yaml

@@ -3540,67 +3540,71 @@
   mode: single
 - id: '1787462157568'
   alias: 3D Print Early Layers Snapshot
-  description: Sends a SparkX i7 camera snapshot once per print when Z crosses 1.0
-    mm while printing.
+  description: Telegram-only snapshots from all 3 printer cameras. Fires when Z crosses
+    1.0 mm, then again at 25%, 50% and 75% print progress. One set of photos per milestone,
+    sent as a Telegram album.
   triggers:
   - above: 1
     entity_id: sensor.sparkx_i7_position_z
     trigger: numeric_state
+  - above: 25
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 50
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 75
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
   conditions:
   - condition: state
     entity_id: sensor.sparkx_i7_print_status
     state: printing
   actions:
   - variables:
-      early_message: '{% set f = state_attr(''sensor.sparkx_i7_print_status'', ''file'')
-        or '''' %} {% set file = ''No file'' if f in ['''', none, ''unknown'', ''unavailable'']
-        else f.split(''/'')[-1].replace(''.gcode'', '''') %} {% set pct = states(''sensor.sparkx_i7_print_progress'')
-        | int(0) %} {% set elapsed = states(''sensor.sparkx_i7_print_job_time'') |
-        int(0) %} {% set remaining = states(''sensor.sparkx_i7_print_time_left'')
-        | int(0) %} {% set finish = (now() + timedelta(seconds=remaining)).strftime(''%I:%M
-        %p'').lstrip(''0'') if remaining > 0 else ''unknown'' %} {{ file }} Progress:
-        {{ pct }}% · Elapsed: {% if elapsed >= 3600 %}{{ elapsed // 3600 }}h {{ ((elapsed
-        % 3600) // 60) }}m{% else %}{{ ((elapsed % 3600) // 60) }}m{% endif %} · Left:
-        {% if remaining > 0 %}{% if remaining >= 3600 %}{{ remaining // 3600 }}h {{
-        ((remaining % 3600) // 60) }}m{% else %}{{ ((remaining % 3600) // 60) }}m{%
-        endif %}{% else %}unknown{% endif %} Est. finish: {{ finish }}'
-  - action: camera.snapshot
-    data:
-      filename: /config/www/sparkx_i7_early_snapshot.jpg
-    target:
-      entity_id: camera.sparkx_i7_printer_camera
+      message: '{% set file = state_attr(''sensor.sparkx_i7_print_status'', ''file'')
+        or '''' %} {% set name = ''Print'' if file in ['''', none, ''unknown'', ''unavailable'']
+        else file.split(''/'')[-1].replace(''.gcode'', '''') %} {% set pct = states(''sensor.sparkx_i7_print_progress'')
+        | int(0) %} {% set left = states(''sensor.sparkx_i7_print_time_left'') | int(0)
+        %} 3D print · {{ milestone }} · {{ name }} at {{ pct }}%{% if left > 0 %}
+        · {{ (left // 3600) }}h {{ ((left % 3600) // 60) }}m left{% endif %}'
+      milestone: '{% if trigger.entity_id == ''sensor.sparkx_i7_position_z'' %} First
+        layers (Z {{ trigger.to_state.state | float(1) }} mm) {% elif trigger.to_state.state
+        | float(0) >= 75 %} 75% complete {% elif trigger.to_state.state | float(0)
+        >= 50 %} 50% complete {% else %} 25% complete {% endif %}'
+      tag: '{% if trigger.entity_id == ''sensor.sparkx_i7_position_z'' %} z1 {% else
+        %} p{{ trigger.above | int }} {% endif %}'
   - parallel:
-    - action: notify.mobile_app_sm_f956w
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_motorola_one_vision
+        filename: /config/www/sparkx_{{ tag }}.jpg
+      target:
+        entity_id: camera.sparkx_i7_printer_camera
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_francos_ipad
+        filename: /config/www/ender5_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera_duckdns_org
+    - action: camera.snapshot
       data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: notify.mobile_app_sm_t387w
-      data:
-        data:
-          image: /local/sparkx_i7_early_snapshot.jpg
-        message: '{{ early_message }}'
-        title: 3D print early check
-    - action: telegram_bot.send_photo
-      data:
-        caption: '{{ early_message }}'
-        entity_id: notify.franco
-        file: /config/www/sparkx_i7_early_snapshot.jpg
-        parse_mode: plain_text
-  mode: single
+        filename: /config/www/ender_cam2_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera2_duckdns_org
+  - action: telegram_bot.send_media_group
+    data:
+      caption: '{{ message }}'
+      media:
+      - caption: SparkX i7
+        file: /config/www/sparkx_{{ tag }}.jpg
+      - caption: Ender 5 Pro
+        file: /config/www/ender5_{{ tag }}.jpg
+      - caption: Ender cam 2
+        file: /config/www/ender_cam2_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  max: 4
+  mode: parallel
 - id: '1787530101996'
   alias: 'Alert: Thread node offline'
   description: 'Early warning when a Matter-over-Thread device loses its mesh attachment