opencode/decisions.yaml, zigbee2mqtt/state.json

opencode/decisions.yaml

@@ -1053,10 +1053,10 @@ notes:
       segment.
     rationale: sensor.sparkx_i7_used_material_length is a per-job counter (resets to 0 at
       completion), so derived templates read 0 when idle; the helpers keep the last job
-      across restarts. The latch automation (1791477238762) accumulates each colour segment
-      into input_number.sparkx_i7_slot_N_grams; the completion adds the final segment and
-      sums them. A split(' ') bug left helper_idx empty, so total and last-job equalled only
-      the last segment (12.02 g, not 59.4 g). Do not revert.
+      across restarts. The latch automation (1791477238762) accumulates each colour
+      segment into input_number.sparkx_i7_slot_N_grams; the completion adds the final
+      segment and sums them. A split(' ') bug left helper_idx empty, so total and last-job
+      equalled only the last segment (12.02 g, not 59.4 g). Do not revert.
     entities:
       - input_number.sparkx_i7_last_job_filament_weight
       - input_number.sparkx_i7_last_job_cost
@@ -1072,3 +1072,41 @@ notes:
       - spoolman
     pin: true
     status: active
+  - id: 2026-10-15-sparkx-i7-low-spool-alerts-use-a-4
+    date: 2026-10-15
+    title: SparkX i7 low-spool alerts use a 4-digit band dedupe
+    decision: The SparkX i7 low-spool alert (automation 1792076023718, every 15 min) stores a
+      4-digit band in input_text.sparkx_i7_low_spool_notified, slot 1->4, 0=ok / 1=<100 g
+      / 2=<25 g, and notifies only when band > stored band and band > 0. The dashboard
+      tube cue mirrors the same bands. CFS Lite slots only.
+    rationale: Gives one notification per threshold crossing per slot; recovery updates the
+      stored band silently so no repeat. The tube cards compute the alert-identical band
+      from the same spool entity, so the card and the notification cannot disagree about a
+      slot's state. A spool sensor briefly going unavailable can reset its band to 0 and
+      re-notify once on recovery; that is known and accepted.
+    entities:
+      - input_text.sparkx_i7_low_spool_notified
+      - automation.sparkx_i7_low_spool_alert
+    files:
+      - automations.yaml
+    status: active
+  - id: 2026-10-15-cfs-lite-slot-matching-is-by-spoolman
+    date: 2026-10-15
+    title: CFS Lite slot matching is by Spoolman spool location, not colour
+    decision: SparkX i7 per-slot filament tracking matches purely on the Spoolman spool's
+      location field == 'CFS Lite <n>' (slots 1-4); the colour check and any fallback were
+      removed. When swapping a roll into a slot, set that spool's Location to 'CFS Lite
+      <n>' — a stale label is the only thing that can misroute a deduction.
+    rationale: Identical-colour rolls in different slots auto-rotate, so colour alone cannot
+      attribute usage. Only individual spool records (their location field) were changed;
+      no Spoolman setting or config was touched. Applies to automation 1791477238729
+      (completion), 1791477238762 (latch), 1791477238799 (sufficiency) and script
+      spoolman_set_spool_remaining.
+    entities:
+      - sensor.sparkx_i7_active_filament_slot
+    files:
+      - automations.yaml
+      - scripts.yaml
+    integrations:
+      - spoolman
+    status: active

zigbee2mqtt/state.json

@@ -47,7 +47,7 @@
         "countdown_to_turn_off": 0,
         "voltage": 119.3,
         "countdown_to_turn_on": 0,
-        "energy": 109.73,
+        "energy": 109.74,
         "power_factor": 0.94,
         "ac_frequency": 60,
         "update": {
@@ -58,7 +58,7 @@
             "latest_release_notes": null
         },
         "linkquality": 145,
-        "power": 94.4,
+        "power": 92.4,
         "current": 0.89,
         "power_on_behavior": "on"
     },
@@ -74,13 +74,13 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 118.8,
+        "voltage": 118.3,
         "state": "ON",
         "ac_frequency": 60,
-        "energy": 222.83,
-        "power": 0.8,
-        "current": 0.06,
-        "power_factor": 0.39,
+        "energy": 222.84,
+        "power": 101.3,
+        "current": 0.9,
+        "power_factor": 0.94,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -95,13 +95,13 @@
         "led_brightness": 100,
         "countdown_to_turn_off": 0,
         "countdown_to_turn_on": 0,
-        "voltage": 119.3,
-        "energy": 104.35,
+        "voltage": 119.8,
+        "energy": 104.36,
         "state": "ON",
-        "power": 42.6,
+        "power": 39.5,
         "current": 0.47,
         "ac_frequency": 60,
-        "power_factor": 0.76,
+        "power_factor": 0.75,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -119,7 +119,7 @@
         "energy": 15.31,
         "current": 0.01,
         "power": 0.1,
-        "power_factor": 0.11,
+        "power_factor": 0.2,
         "linkquality": 116,
         "update": {
             "state": "idle",
@@ -143,7 +143,7 @@
         "current": 0.02,
         "ac_frequency": 60,
         "power": 0.4,
-        "power_factor": 0.14,
+        "power_factor": 0.2,
         "update": {
             "state": "idle",
             "installed_version": 268513381,
@@ -171,7 +171,7 @@
     },
     "0xa4c1380d0679ffff": {
         "battery": 100,
-        "temperature": 11.6,
+        "temperature": 11.3,
         "temperature_units": "celsius",
         "temperature_calibration": 0,
         "update": {
@@ -224,7 +224,7 @@
     },
     "0xb40e060fffe717c5": {
         "battery": 100,
-        "occupancy": false,
+        "occupancy": true,
         "tamper": false,
         "battery_low": false,
         "linkquality": 145,