francop/HomeAssistantVS
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

automations.yaml, zigbee2mqtt/state.json

Browse Source
This commit is contained in:
Home Assistant Version Control
2026-10-15 13:12:41 +00:00
parent 09c61b0496
commit 6323cfeb0c
2 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files
automations.yaml
+4 -4
View File
@@ -4827,9 +4827,9 @@
{% endfor %}
{% set pct = ((((sp.rem | float) / (sp.fw | float)) * 100) | round(0) | int) if (sp.fw | float) > 0 else 0 %}
{% if sp.id != '' %}{% set ns.loaded = ns.loaded + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%)'] %}{% endif %}
{% if sp.id != '' and single and c == gcol %}{% set ns.match_label = label %}{% set ns.match_rem = sp.rem %}{% endif %}
{% if sp.id != '' and single and n == aslot %}{% set ns.match_label = label %}{% set ns.match_rem = sp.rem %}{% endif %}
{% if sp.id != '' %}
{% if single and c == gcol %}
{% if single and n == aslot %}
{% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g ~ ' g needed'] %}
{% else %}{% set ns.ok = ns.ok + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g ~ ' g needed'] %}{% endif %}
{% elif single %}
@@ -4850,11 +4850,11 @@
{% if job_g <= 0 %}Cannot verify: slicer filament estimate not available yet.{% if ns.loaded %}
Loaded:
- {{ ns.loaded | join('\n- ') }}{% endif %}
{% elif single and gcol in cols.list %}
{% elif single and aslot != '' %}
{% if ns.short %}NOT ENOUGH filament:
- {{ ns.short | join('\n- ') }}
{% elif ns.match_label %}Enough filament: {{ ns.match_label }}: {{ ns.match_rem | round(1) }} g left, {{ job_g }} g needed.
{% else %}Matched slot {{ gcol | upper }} has no Spoolman spool at CFS Lite, so remaining cannot be checked.{% endif %}
{% else %}Active slot {{ aslot }} has no Spoolman spool at CFS Lite, so remaining cannot be checked.{% endif %}
{% elif single %}No exact colour match for the print colour #{{ gcol | upper }} in a loaded CFS slot, so the exact spool cannot be identified.{% if ns.cover %}
Would cover {{ job_g }} g:
- {{ ns.cover | join('\n- ') }}{% endif %}{% if ns.below %}
zigbee2mqtt/state.json
+11 -11
View File
@@ -4,7 +4,7 @@
"state": "ON",
"led_brightness": 100,
"countdown_to_turn_off": 0,
"voltage": 119.9,
"voltage": 119.3,
"countdown_to_turn_on": 0,
"ac_frequency": 60,
"power_factor": 0.14,
@@ -74,12 +74,12 @@
"led_brightness": 100,
"countdown_to_turn_off": 0,
"countdown_to_turn_on": 0,
"voltage": 118.3,
"voltage": 118.8,
"state": "ON",
"ac_frequency": 60,
"energy": 222.53,
"power": 98.8,
"current": 0.91,
"energy": 222.54,
"power": 3.6,
"current": 0.05,
"power_factor": 0.41,
"update": {
"state": "idle",
@@ -96,10 +96,10 @@
"countdown_to_turn_off": 0,
"countdown_to_turn_on": 0,
"voltage": 119.2,
"energy": 104.14,
"energy": 104.15,
"state": "ON",
"power": 107.7,
"current": 1.12,
"power": 69.1,
"current": 0.73,
"ac_frequency": 60,
"power_factor": 0.8,
"update": {
@@ -114,12 +114,12 @@
},
"0xffffb40e060895b3": {
"state": "ON",
"voltage": 119.8,
"voltage": 119.3,
"ac_frequency": 60,
"energy": 15.31,
"current": 0.01,
"power": 0.1,
"power_factor": 0.13,
"power_factor": 0.11,
"linkquality": 116,
"update": {
"state": "idle",
@@ -143,7 +143,7 @@
"current": 0.02,
"ac_frequency": 60,
"power": 0.3,
"power_factor": 0.2,
"power_factor": 0.14,
"update": {
"state": "idle",
"installed_version": 268513381,