.storage/lovelace.sparkx_i7, zigbee2mqtt/state.json
This commit is contained in:
Home Assistant Version Control
+24
-24
@@ -665,7 +665,7 @@
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 1",
|
||||
"primary": "{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_filament') }}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (states(e) | replace('#','') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 1' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -677,7 +677,7 @@
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 2",
|
||||
"primary": "{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_filament') }}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (states(e) | replace('#','') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 2' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -689,7 +689,7 @@
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 3",
|
||||
"primary": "{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_filament') }}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (states(e) | replace('#','') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 3' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -701,7 +701,7 @@
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 4",
|
||||
"primary": "{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_filament') }}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (states(e) | replace('#','') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"secondary": "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#','') | lower %}{% set ns = namespace(id='', rem=0, base=0) %}{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}{% if ns.id == '' and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 4' %}{% set ns.id = states(e[:-10] ~ '_id') %}{% set ns.rem = states(e[:-10]) | float(0) %}{% set ns.base = state_attr(e[:-10], 'filament_weight') | float(0) %}{% endif %}{% endfor %}{% if col %}{{ col }} · {% endif %}{% if ns.id != '' %}{{ ns.rem | round(0) | int }} g left ({{ (ns.rem / ns.base * 100) | round(0) | int if ns.base > 0 else 0 }}%){% else %}no spool matched{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
}
|
||||
],
|
||||
@@ -856,7 +856,7 @@
|
||||
"name": "Slot 1",
|
||||
"picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#','') | lower %}{% set svg = '<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"96\" height=\"96\"><rect width=\"96\" height=\"96\" rx=\"20\" fill=\"#' ~ c ~ '\" stroke=\"rgba(127,127,127,0.6)\" stroke-width=\"4\"/></svg>' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_1_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 1' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }} g",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -870,7 +870,7 @@
|
||||
"name": "Slot 2",
|
||||
"picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#','') | lower %}{% set svg = '<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"96\" height=\"96\"><rect width=\"96\" height=\"96\" rx=\"20\" fill=\"#' ~ c ~ '\" stroke=\"rgba(127,127,127,0.6)\" stroke-width=\"4\"/></svg>' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_2_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 2' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }} g",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -884,7 +884,7 @@
|
||||
"name": "Slot 3",
|
||||
"picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#','') | lower %}{% set svg = '<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"96\" height=\"96\"><rect width=\"96\" height=\"96\" rx=\"20\" fill=\"#' ~ c ~ '\" stroke=\"rgba(127,127,127,0.6)\" stroke-width=\"4\"/></svg>' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_3_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 3' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }} g",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -898,7 +898,7 @@
|
||||
"name": "Slot 4",
|
||||
"picture": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#','') | lower %}{% set svg = '<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"96\" height=\"96\"><rect width=\"96\" height=\"96\" rx=\"20\" fill=\"#' ~ c ~ '\" stroke=\"rgba(127,127,127,0.6)\" stroke-width=\"4\"/></svg>' %}{{ 'data:image/svg+xml;base64,' ~ svg | base64_encode if c | length == 6 else '' }}",
|
||||
"primary": "{{ states('sensor.sparkx_i7_slot_4_color_name') }} (#{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | upper }})",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }} g",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 4' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• Spool {{ ns.id }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_vendor') | default('?', true) }} · {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_material') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}\n• This print: {{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }} g",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -954,11 +954,11 @@
|
||||
"multiline_secondary": true,
|
||||
"name": "Next Deduction Match",
|
||||
"primary": "{{ states('sensor.sparkx_i7_active_filament_slot') }}",
|
||||
"secondary": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color' %}{% set color = states(ce) | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Color #{{ color | upper }} → spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left){% elif slot in ['', 'unknown', 'unavailable'] %}No slot latched{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}Color #{{ color | upper }} — no spool with stock{% endif %}",
|
||||
"secondary": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color' %}{% set color = states(ce) | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == ('cfs lite ' ~ slot.split('_')[-1]) %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Color #{{ color | upper }} → spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name') }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left){% elif slot in ['', 'unknown', 'unavailable'] %}No slot latched{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}Color #{{ color | upper }} — no spool with stock{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
"content": "**Spoolman UI:** [http://192.168.1.140:7912](http://192.168.1.140:7912)\n\nEach CFS slot is matched to the Spoolman spool with the same **color hex** that still has stock (remaining > 0) **and whose location is CFS Lite**. All 4 rolls live in the **CFS Lite** location in Spoolman.\n\n**Replaced a roll?** Register the new roll in Spoolman with the same color hex and location CFS Lite. No Home Assistant changes needed — a same-color roll in another location (e.g. Storage) is ignored, and exhausted spools are skipped automatically.",
|
||||
"content": "**Spoolman UI:** [http://192.168.1.140:7912](http://192.168.1.140:7912)\n\nEach CFS slot is matched to the Spoolman spool whose **location** is that slot's name — `CFS Lite 1` … `CFS Lite 4`. Colour is no longer used to pick the spool, so two identical black rolls stay distinct.\n\n**Replaced a roll?** Put the new roll in that slot's location in Spoolman (`CFS Lite 1` … `CFS Lite 4`). A roll in another location (e.g. Storage) is ignored.",
|
||||
"grid_options": {
|
||||
"columns": "full"
|
||||
},
|
||||
@@ -983,9 +983,9 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 1",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 1' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 1' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_1_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 1' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -997,9 +997,9 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 2",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 2' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 2' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_2_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 2' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -1011,9 +1011,9 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 3",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 3' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 3' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_3_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 3' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
},
|
||||
{
|
||||
@@ -1025,9 +1025,9 @@
|
||||
"icon_color": "{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
|
||||
"multiline_secondary": true,
|
||||
"name": "Slot 4",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (states(e) | replace('#', '') | lower) == color and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"picture": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 4' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') if ns.id and state_attr('sensor.spoolman_spool_' ~ ns.id, 'entity_picture') else '' }}",
|
||||
"primary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 4' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}Spool {{ ns.id }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_name') | default('?', true) }} · {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g left{% elif color in ['', 'unknown', 'unavailable'] %}Slot color unavailable{% else %}No spool with stock matches this color{% endif %}",
|
||||
"secondary": "{% set color = states('sensor.sparkx_i7_cfs_box_1_slot_4_color') | replace('#', '') | lower %}{% set ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == 'cfs lite 4' %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == '' %}{% set ns.id = states(b ~ '_id') %}{% endif %}{% endif %}{% endfor %}{% if ns.id %}• {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_vendor_name') | default('?', true) }} · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_material') | default('?', true) }} · #{{ color | upper }}\n• Remaining: {{ (states('sensor.spoolman_spool_' ~ ns.id) | float(0)) | round(1) }} g · used {{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_weight') | float(0)) | round(1) }} g ({{ (state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_percentage') | float(0)) | round(1) }}%)\n• Remaining length: {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'remaining_length') | float(0)) / 1000) | round(1) }} m · used {{ ((state_attr('sensor.spoolman_spool_' ~ ns.id, 'used_length') | float(0)) / 1000) | round(1) }} m\n• Spool: Ø{{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_diameter') | default('?', true) }} mm · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_density') | default('?', true) }} g/cm³ · {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_weight') | default('?', true) }} g · art. {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_article_number') | default('?', true) }}\n• Temps: bed {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_bed_temp') | default('?', true) }}°C · hotend {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_settings_extruder_temp') | default('?', true) }}°C\n• Flow: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_flow_rate') }} · Runout est.: {{ states('sensor.spoolman_spool_' ~ ns.id ~ '_estimated_runout') }}\n• Registered: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'registered') | default('?', true) }} · Location: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'location') | default('?', true) }} · Price: {{ state_attr('sensor.spoolman_spool_' ~ ns.id, 'filament_price') | default('?', true) }}{% elif color in ['', 'unknown', 'unavailable'] %}• Slot color unavailable{% else %}• No spool with stock matches this color{% endif %}",
|
||||
"type": "custom:mushroom-template-card"
|
||||
}
|
||||
],
|
||||
@@ -1220,7 +1220,7 @@
|
||||
"include": [
|
||||
{
|
||||
"attributes": {
|
||||
"location": "CFS Lite"
|
||||
"location": "CFS Lite*"
|
||||
},
|
||||
"entity_id": "sensor.spoolman_spool_*"
|
||||
}
|
||||
@@ -1238,7 +1238,7 @@
|
||||
"type": "custom:auto-entities"
|
||||
},
|
||||
{
|
||||
"content": "Every spool with location **CFS Lite** joins this graph automatically — register a new roll in Spoolman (same color hex, location CFS Lite) and it appears without dashboard edits. History follows the spool entity; a replaced roll keeps its own history under its own spool id.",
|
||||
"content": "Every spool whose location starts with **CFS Lite** joins this graph automatically — register a new roll in Spoolman with location `CFS Lite 1` … `CFS Lite 4` and it appears without dashboard edits. History follows the spool entity; a replaced roll keeps its own history under its own spool id.",
|
||||
"grid_options": {
|
||||
"columns": "full"
|
||||
},
|
||||
|
||||
+14
-14
@@ -22,13 +22,13 @@
|
||||
},
|
||||
"0xffffb40e0607af27": {
|
||||
"state": "ON",
|
||||
"voltage": 119.1,
|
||||
"voltage": 119.3,
|
||||
"ac_frequency": 60,
|
||||
"led_brightness": 100,
|
||||
"countdown_to_turn_off": 0,
|
||||
"countdown_to_turn_on": 0,
|
||||
"power": 2,
|
||||
"current": 0.09,
|
||||
"power": 2.1,
|
||||
"current": 0.1,
|
||||
"energy": 57.13,
|
||||
"power_factor": 0.18,
|
||||
"update": {
|
||||
@@ -48,7 +48,7 @@
|
||||
"voltage": 119.5,
|
||||
"countdown_to_turn_on": 0,
|
||||
"energy": 109.58,
|
||||
"power_factor": 0.31,
|
||||
"power_factor": 0.2,
|
||||
"ac_frequency": 60,
|
||||
"update": {
|
||||
"state": "idle",
|
||||
@@ -74,13 +74,13 @@
|
||||
"led_brightness": 100,
|
||||
"countdown_to_turn_off": 0,
|
||||
"countdown_to_turn_on": 0,
|
||||
"voltage": 118.3,
|
||||
"voltage": 118.9,
|
||||
"state": "ON",
|
||||
"ac_frequency": 60,
|
||||
"energy": 222.62,
|
||||
"power": 96.4,
|
||||
"current": 0.94,
|
||||
"power_factor": 0.94,
|
||||
"power": 0.8,
|
||||
"current": 0.05,
|
||||
"power_factor": 0.39,
|
||||
"update": {
|
||||
"state": "idle",
|
||||
"installed_version": 268513381,
|
||||
@@ -98,10 +98,10 @@
|
||||
"voltage": 119.8,
|
||||
"energy": 104.22,
|
||||
"state": "ON",
|
||||
"power": 37.9,
|
||||
"current": 0.43,
|
||||
"power": 42.5,
|
||||
"current": 0.47,
|
||||
"ac_frequency": 60,
|
||||
"power_factor": 0.74,
|
||||
"power_factor": 0.75,
|
||||
"update": {
|
||||
"state": "idle",
|
||||
"installed_version": 268513381,
|
||||
@@ -119,7 +119,7 @@
|
||||
"energy": 15.31,
|
||||
"current": 0.01,
|
||||
"power": 0.1,
|
||||
"power_factor": 0.13,
|
||||
"power_factor": 0.1,
|
||||
"linkquality": 116,
|
||||
"update": {
|
||||
"state": "idle",
|
||||
@@ -143,7 +143,7 @@
|
||||
"current": 0.02,
|
||||
"ac_frequency": 60,
|
||||
"power": 0.3,
|
||||
"power_factor": 0.14,
|
||||
"power_factor": 0.2,
|
||||
"update": {
|
||||
"state": "idle",
|
||||
"installed_version": 268513381,
|
||||
@@ -171,7 +171,7 @@
|
||||
},
|
||||
"0xa4c1380d0679ffff": {
|
||||
"battery": 100,
|
||||
"temperature": 10.9,
|
||||
"temperature": 10.8,
|
||||
"temperature_units": "celsius",
|
||||
"temperature_calibration": 0,
|
||||
"update": {
|
||||
|
||||
Reference in New Issue
Block a user