.storage/lovelace_resources

.HA_VERSION

@@ -1 +1 @@
-2026.8.3
+2026.10.1

.ha_mcp/backups/automation.1791477238729.20261009_002125.yaml

@@ -0,0 +1,139 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238729'
+captured: '2026-10-09T00:21:25.595930+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool matching the latched
+    slot color (remaining weight > 0 guard), accumulates it per slot, then sends a
+    summary notification with total and per-slot breakdown whenever anything was deducted.
+    Silent when total is 0. Clears the latch and re-baselines the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions: []
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and
+        ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{%
+        endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.1791477238729.20261009_003247.yaml

@@ -0,0 +1,140 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238729'
+captured: '2026-10-09T00:32:47.977680+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool matching the latched
+    slot color (remaining weight > 0 guard), accumulates it per slot, then sends a
+    summary notification with total and per-slot breakdown whenever anything was deducted.
+    Silent when total is 0. Clears the latch and re-baselines the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions: []
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color and (state_attr(e[:-10], ''location'') | default('''', true)
+        | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+        > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{%
+        endif %}{% endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool with remaining weight matches
+            that color. Register the new roll in Spoolman, then adjust manually if
+            needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.1791477238729.20261012_163311.yaml

@@ -0,0 +1,171 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238729'
+captured: '2026-10-12T16:33:11.682946+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    slot, then sends a summary notification with total and per-slot breakdown whenever
+    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+    id: complete
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: stopped
+    id: stopped
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: error
+    id: error
+  conditions:
+  - condition: template
+    value_template: '{{ trigger.id == ''complete'' or states(''input_text.sparkx_i7_print_spool_latch'')
+      not in ['''', ''unknown'', ''unavailable''] }}'
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+      outcome: '{% set tid = trigger.id | default(''complete'') %}{{ ''cancelled''
+        if tid == ''stopped'' else (''error'' if tid == ''error'' else ''complete'')
+        }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color and (state_attr(e[:-10], ''location'') | default('''', true)
+        | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+        > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{%
+        endif %}{% endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - if:
+      condition: template
+      value_template: '{{ trigger.id == ''complete'' }}'
+    then:
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_filament_weight
+      data:
+        value: '{{ final_grams }}'
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_cost
+      data:
+        value: '{{ ((final_grams | float) * (states(''input_number.filament_price_per_kg'')
+          | float(25)) / 1000) | round(2) }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.1791477238729.20261015_132317.yaml

@@ -0,0 +1,171 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238729'
+captured: '2026-10-15T13:23:17.499559+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    slot, then sends a summary notification with total and per-slot breakdown whenever
+    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+    id: complete
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: stopped
+    id: stopped
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: error
+    id: error
+  conditions:
+  - condition: template
+    value_template: '{{ trigger.id == ''complete'' or states(''input_text.sparkx_i7_print_spool_latch'')
+      not in ['''', ''unknown'', ''unavailable''] }}'
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+      outcome: '{% set tid = trigger.id | default(''complete'') %}{{ ''cancelled''
+        if tid == ''stopped'' else (''error'' if tid == ''error'' else ''complete'')
+        }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
+        | default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
+        %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == ''''
+        %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor %}{{
+        ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split(''_'')[-1] if old_slot.split(''_'')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print {{ outcome }}: final segment of {{ final_grams }} g from
+            {{ old_slot if old_slot else ''the active slot'' }} (color #{{ color |
+            upper }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print {{ outcome }} - Spoolman updated
+        message: 'Print {{ outcome }} - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - if:
+      condition: template
+      value_template: '{{ trigger.id == ''complete'' }}'
+    then:
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_filament_weight
+      data:
+        value: '{{ summary_total }}'
+    - action: input_number.set_value
+      target:
+        entity_id: input_number.sparkx_i7_last_job_cost
+      data:
+        value: '{{ ((summary_total | float) * (states(''input_number.filament_price_per_kg'')
+          | float(25)) / 1000) | round(2) }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.1791477238762.20261009_002125.yaml

@@ -0,0 +1,150 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238762'
+captured: '2026-10-09T00:21:25.534171+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  description: 'Segment tracking for Spoolman: at print start resets the length checkpoint
+    and per-slot gram counters and latches the active CFS slot. On every slot change
+    mid-print, deducts the exact extrusion of the finished segment (used_material_length
+    delta x g/cm) from the Spoolman spool matching the previous slot color hex (only
+    if that spool has remaining weight), accumulates grams per slot, notifies on no-match,
+    then re-baselines the checkpoint and advances the latch.'
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+    id: slot_changed
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      new_slot: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_number.set_value
+        target:
+          entity_id:
+          - input_number.sparkx_i7_slot_1_grams
+          - input_number.sparkx_i7_slot_2_grams
+          - input_number.sparkx_i7_slot_3_grams
+          - input_number.sparkx_i7_slot_4_grams
+        data:
+          value: 0
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot if new_slot not in [''unknown'', ''unavailable''] else
+            '''' }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot not in ['''', ''unknown'', ''unavailable''] and
+          new_slot not in ['''', ''unknown'', ''unavailable''] and new_slot != old_slot
+          }}'
+      sequence:
+      - variables:
+          grams: '{{ (([cur | float - (states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0)), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.03))) | round(2) }}'
+          color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+      - variables:
+          spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+            %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''')
+            | lower) == color %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+            > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif
+            %}{% endif %}{% endfor %}{{ ns.id }}'
+      - if:
+          condition: template
+          value_template: '{{ grams | float > 0 }}'
+        then:
+        - choose:
+          - conditions:
+              condition: template
+              value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+                }}'
+            sequence:
+            - action: spoolman.use_spool_filament
+              data:
+                id: '{{ spool_id | int(0) }}'
+                use_weight: '{{ grams | float(0) }}'
+            - if:
+                condition: template
+                value_template: '{{ old_slot.split('' '')[-1] in [''1'', ''2'', ''3'',
+                  ''4''] }}'
+              then:
+              - action: input_number.set_value
+                target:
+                  entity_id: input_number.sparkx_i7_slot_{{ old_slot.split(' ')[-1]
+                    }}_grams
+                data:
+                  value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ old_slot.split(''
+                    '')[-1] ~ ''_grams'') | float(0)) + (grams | float) }}'
+          default:
+          - action: notify.persistent_notification
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+          - action: notify.mobile_app_francos_ipad
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+          - action: notify.mobile_app_sm_f956w
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot in ['''', ''unknown'', ''unavailable''] and new_slot
+          not in ['''', ''unknown'', ''unavailable''] }}'
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+  mode: queued
+  max: 10

.ha_mcp/backups/automation.1791477238762.20261009_003247.yaml

@@ -0,0 +1,151 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238762'
+captured: '2026-10-09T00:32:47.861324+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  description: 'Segment tracking for Spoolman: at print start resets the length checkpoint
+    and per-slot gram counters and latches the active CFS slot. On every slot change
+    mid-print, deducts the exact extrusion of the finished segment (used_material_length
+    delta x g/cm) from the Spoolman spool matching the previous slot color hex (only
+    if that spool has remaining weight), accumulates grams per slot, notifies on no-match,
+    then re-baselines the checkpoint and advances the latch.'
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+    id: slot_changed
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      new_slot: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_number.set_value
+        target:
+          entity_id:
+          - input_number.sparkx_i7_slot_1_grams
+          - input_number.sparkx_i7_slot_2_grams
+          - input_number.sparkx_i7_slot_3_grams
+          - input_number.sparkx_i7_slot_4_grams
+        data:
+          value: 0
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot if new_slot not in [''unknown'', ''unavailable''] else
+            '''' }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot not in ['''', ''unknown'', ''unavailable''] and
+          new_slot not in ['''', ''unknown'', ''unavailable''] and new_slot != old_slot
+          }}'
+      sequence:
+      - variables:
+          grams: '{{ (([cur | float - (states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0)), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.03))) | round(2) }}'
+          color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+      - variables:
+          spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+            %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''')
+            | lower) == color and (state_attr(e[:-10], ''location'') | default('''',
+            true) | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b)
+            | float(0)) > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'')
+            %}{% endif %}{% endif %}{% endfor %}{{ ns.id }}'
+      - if:
+          condition: template
+          value_template: '{{ grams | float > 0 }}'
+        then:
+        - choose:
+          - conditions:
+              condition: template
+              value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+                }}'
+            sequence:
+            - action: spoolman.use_spool_filament
+              data:
+                id: '{{ spool_id | int(0) }}'
+                use_weight: '{{ grams | float(0) }}'
+            - if:
+                condition: template
+                value_template: '{{ old_slot.split('' '')[-1] in [''1'', ''2'', ''3'',
+                  ''4''] }}'
+              then:
+              - action: input_number.set_value
+                target:
+                  entity_id: input_number.sparkx_i7_slot_{{ old_slot.split(' ')[-1]
+                    }}_grams
+                data:
+                  value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ old_slot.split(''
+                    '')[-1] ~ ''_grams'') | float(0)) + (grams | float) }}'
+          default:
+          - action: notify.persistent_notification
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+          - action: notify.mobile_app_francos_ipad
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+          - action: notify.mobile_app_sm_f956w
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool with remaining
+                weight matches that color. Register the new roll in Spoolman, then
+                adjust manually if needed.'
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot in ['''', ''unknown'', ''unavailable''] and new_slot
+          not in ['''', ''unknown'', ''unavailable''] }}'
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+  mode: queued
+  max: 10

.ha_mcp/backups/automation.1791477238762.20261012_163106.yaml

@@ -0,0 +1,152 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238762'
+captured: '2026-10-12T16:31:06.438795+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  description: 'Segment tracking for Spoolman: at print start resets the length checkpoint
+    and per-slot gram counters and latches the active CFS slot. On every slot change
+    mid-print, deducts the exact extrusion of the finished segment (used_material_length
+    delta x g/cm) from the Spoolman spool in the CFS Lite location matching the previous
+    slot color hex (only if that spool has remaining weight), accumulates grams per
+    slot, notifies on no-match, then re-baselines the checkpoint and advances the
+    latch.'
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+    id: slot_changed
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      new_slot: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_number.set_value
+        target:
+          entity_id:
+          - input_number.sparkx_i7_slot_1_grams
+          - input_number.sparkx_i7_slot_2_grams
+          - input_number.sparkx_i7_slot_3_grams
+          - input_number.sparkx_i7_slot_4_grams
+        data:
+          value: 0
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot if new_slot not in [''unknown'', ''unavailable''] else
+            '''' }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot not in ['''', ''unknown'', ''unavailable''] and
+          new_slot not in ['''', ''unknown'', ''unavailable''] and new_slot != old_slot
+          }}'
+      sequence:
+      - variables:
+          grams: '{{ (([cur | float - (states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0)), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.03))) | round(2) }}'
+          color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+      - variables:
+          spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+            %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''')
+            | lower) == color and (state_attr(e[:-10], ''location'') | default('''',
+            true) | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b)
+            | float(0)) > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'')
+            %}{% endif %}{% endif %}{% endfor %}{{ ns.id }}'
+      - if:
+          condition: template
+          value_template: '{{ grams | float > 0 }}'
+        then:
+        - choose:
+          - conditions:
+              condition: template
+              value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+                }}'
+            sequence:
+            - action: spoolman.use_spool_filament
+              data:
+                id: '{{ spool_id | int(0) }}'
+                use_weight: '{{ grams | float(0) }}'
+            - if:
+                condition: template
+                value_template: '{{ old_slot.split('' '')[-1] in [''1'', ''2'', ''3'',
+                  ''4''] }}'
+              then:
+              - action: input_number.set_value
+                target:
+                  entity_id: input_number.sparkx_i7_slot_{{ old_slot.split(' ')[-1]
+                    }}_grams
+                data:
+                  value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ old_slot.split(''
+                    '')[-1] ~ ''_grams'') | float(0)) + (grams | float) }}'
+          default:
+          - action: notify.persistent_notification
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_francos_ipad
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_sm_f956w
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot in ['''', ''unknown'', ''unavailable''] and new_slot
+          not in ['''', ''unknown'', ''unavailable''] }}'
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+  mode: queued
+  max: 10

.ha_mcp/backups/automation.1791477238762.20261012_163120.yaml

@@ -0,0 +1,152 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238762'
+captured: '2026-10-12T16:31:20.387625+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  description: 'Segment tracking for Spoolman: at print start resets the length checkpoint
+    and per-slot gram counters and latches the active CFS slot. On every slot change
+    mid-print, deducts the exact extrusion of the finished segment (used_material_length
+    delta x g/cm) from the Spoolman spool in the CFS Lite location matching the previous
+    slot color hex (only if that spool has remaining weight), accumulates grams per
+    slot, notifies on no-match, then re-baselines the checkpoint and advances the
+    latch.'
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+    id: slot_changed
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      new_slot: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_number.set_value
+        target:
+          entity_id:
+          - input_number.sparkx_i7_slot_1_grams
+          - input_number.sparkx_i7_slot_2_grams
+          - input_number.sparkx_i7_slot_3_grams
+          - input_number.sparkx_i7_slot_4_grams
+        data:
+          value: 0
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot if new_slot not in [''unknown'', ''unavailable''] else
+            '''' }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot not in ['''', ''unknown'', ''unavailable''] and
+          new_slot not in ['''', ''unknown'', ''unavailable''] and new_slot != old_slot
+          }}'
+      sequence:
+      - variables:
+          grams: '{{ (([cur | float - (states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0)), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.03))) | round(2) }}'
+          color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+      - variables:
+          spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+            %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''')
+            | lower) == color and (state_attr(e[:-10], ''location'') | default('''',
+            true) | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b)
+            | float(0)) > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'')
+            %}{% endif %}{% endif %}{% endfor %}{{ ns.id }}'
+      - if:
+          condition: template
+          value_template: '{{ grams | float > 0 }}'
+        then:
+        - choose:
+          - conditions:
+              condition: template
+              value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+                }}'
+            sequence:
+            - action: spoolman.use_spool_filament
+              data:
+                id: '{{ spool_id | int(0) }}'
+                use_weight: '{{ grams | float(0) }}'
+            - if:
+                condition: template
+                value_template: '{{ old_slot.split('' '')[-1] in [''1'', ''2'', ''3'',
+                  ''4''] }}'
+              then:
+              - action: input_number.set_value
+                target:
+                  entity_id: input_number.sparkx_i7_slot_{{ old_slot.split(' ')[-1]
+                    }}_grams
+                data:
+                  value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ old_slot.split(''
+                    '')[-1] ~ ''_grams'') | float(0)) + (grams | float) }}'
+          default:
+          - action: notify.persistent_notification
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_francos_ipad
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_sm_f956w
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot in ['''', ''unknown'', ''unavailable''] and new_slot
+          not in ['''', ''unknown'', ''unavailable''] }}'
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+  mode: queued
+  max: 10

.ha_mcp/backups/automation.1791477238762.20261015_132353.yaml

@@ -0,0 +1,152 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238762'
+captured: '2026-10-15T13:23:53.053853+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  description: 'Segment tracking for Spoolman: at print start resets the length checkpoint
+    and per-slot gram counters and latches the active CFS slot. On every slot change
+    mid-print, deducts the exact extrusion of the finished segment (used_material_length
+    delta x g/cm) from the Spoolman spool in the CFS Lite location matching the previous
+    slot color hex (only if that spool has remaining weight), accumulates grams per
+    slot, notifies on no-match, then re-baselines the checkpoint and advances the
+    latch.'
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+    id: slot_changed
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      new_slot: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_number.set_value
+        target:
+          entity_id:
+          - input_number.sparkx_i7_slot_1_grams
+          - input_number.sparkx_i7_slot_2_grams
+          - input_number.sparkx_i7_slot_3_grams
+          - input_number.sparkx_i7_slot_4_grams
+        data:
+          value: 0
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot if new_slot not in [''unknown'', ''unavailable''] else
+            '''' }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot not in ['''', ''unknown'', ''unavailable''] and
+          new_slot not in ['''', ''unknown'', ''unavailable''] and new_slot != old_slot
+          }}'
+      sequence:
+      - variables:
+          grams: '{{ (([cur | float - (states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0)), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.03))) | round(2) }}'
+          color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+      - variables:
+          spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+            %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
+            | default('''', true) | lower) == (''cfs lite '' ~ old_slot.split(''_'')[-1])
+            %}{% set b = e[:-10] %}{% if (states(b) | float(0)) > 0 and ns.id == ''''
+            %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{% endif %}{% endfor
+            %}{{ ns.id }}'
+      - if:
+          condition: template
+          value_template: '{{ grams | float > 0 }}'
+        then:
+        - choose:
+          - conditions:
+              condition: template
+              value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+                }}'
+            sequence:
+            - action: spoolman.use_spool_filament
+              data:
+                id: '{{ spool_id | int(0) }}'
+                use_weight: '{{ grams | float(0) }}'
+            - if:
+                condition: template
+                value_template: '{{ old_slot.split(''_'')[-1] in [''1'', ''2'', ''3'',
+                  ''4''] }}'
+              then:
+              - action: input_number.set_value
+                target:
+                  entity_id: input_number.sparkx_i7_slot_{{ old_slot.split('_')[-1]
+                    }}_grams
+                data:
+                  value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ old_slot.split(''_'')[-1]
+                    ~ ''_grams'') | float(0)) + (grams | float) }}'
+          default:
+          - action: notify.persistent_notification
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_francos_ipad
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+          - action: notify.mobile_app_sm_f956w
+            data:
+              title: 'Spoolman: no spool for slot color'
+              message: 'Segment of {{ grams }} g from {{ old_slot }} (color #{{ color
+                | upper }}) could not be deducted - no Spoolman spool in the CFS Lite
+                location with remaining weight matches that color. Register the new
+                roll in Spoolman with location CFS Lite, then adjust manually if needed.'
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+    - conditions:
+        condition: template
+        value_template: '{{ old_slot in ['''', ''unknown'', ''unavailable''] and new_slot
+          not in ['''', ''unknown'', ''unavailable''] }}'
+      sequence:
+      - action: input_number.set_value
+        target:
+          entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+        data:
+          value: '{{ cur }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: '{{ new_slot }}'
+  mode: queued
+  max: 10

.ha_mcp/backups/automation.1791477238799.20261015_132353.yaml

@@ -0,0 +1,122 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: '1791477238799'
+captured: '2026-10-15T13:23:53.149869+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238799'
+  alias: SparkX i7 - Filament sufficiency check at print start
+  description: When a print starts and stays printing for 45 s, reports how much filament
+    the job needs, how much has already been used and how much is left, then compares
+    the loaded CFS Lite spools against that. A single-colour job whose colour is in
+    a loaded slot is checked exactly against that slot's spool; otherwise the slicer
+    gives no per-colour figure, so each loaded spool is compared against the whole
+    job total. Always sends a notification.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    for: 00:00:45
+  conditions: []
+  actions:
+  - variables:
+      gcm: '{{ states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298) }}'
+      length_cm: '{{ states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+        }}'
+      weight_g: '{{ states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+        }}'
+      job_g: '{{ ((weight_g | float) if (weight_g | float) > 0 else (length_cm | float)
+        * (gcm | float)) | round(1) }}'
+      used_len: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      used_g: '{{ (((used_len | float) * (gcm | float)) | round(1)) }}'
+      gcode_file: '{{ state_attr(''sensor.sparkx_i7_expected_material_length'', ''gcode_file'')
+        | default('''', true) }}'
+  - variables:
+      report: "{% set cols = namespace(list=[]) %}\n{% for n in ['1','2','3','4']\
+        \ %}{% set cc = states('sensor.sparkx_i7_cfs_box_1_slot_' ~ n ~ '_color')\
+        \ | replace('#','') | lower %}{% if cc not in ['','none','unknown','unavailable']\
+        \ %}{% set cols.list = cols.list + [cc] %}{% endif %}{% endfor %}\n{% set\
+        \ gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+        \ | default('', true) | string).split(';') %}{% set q = p | replace('#','')\
+        \ | lower | trim %}{% if q not in ['','none','unknown','unavailable'] %}{%\
+        \ set gc.list = gc.list + [q] %}{% endif %}{% endfor %}\n{% set mc = namespace(list=[])\
+        \ %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','material')\
+        \ | default('', true) | string).split(';') %}{% set q = p | trim %}{% if q\
+        \ not in ['','none','unknown','unavailable'] %}{% set mc.list = mc.list +\
+        \ [q] %}{% endif %}{% endfor %}\n{% set single = (gc.list | length) == 1 %}\n\
+        {% set gcol = gc.list[0] if single else '' %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+        \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot if\
+        \ aslot in ['1','2','3','4'] else '' %}\n{% set rem_g = ([((job_g | float)\
+        \ - (used_g | float)), 0] | max) | round(1) %}\n{% set ns = namespace(cover=[],\
+        \ below=[], short=[], ok=[], missing=[], loaded=[], match_label='', match_rem=0)\
+        \ %}\n{% for n in ['1','2','3','4'] %}\n{% set c = states('sensor.sparkx_i7_cfs_box_1_slot_'\
+        \ ~ n ~ '_color') | replace('#','') | lower %}\n{% if c not in ['','none','unknown','unavailable']\
+        \ %}\n{% set cname = states('sensor.sparkx_i7_slot_' ~ n ~ '_color_name')\
+        \ %}\n{% set flabel = states('sensor.sparkx_i7_cfs_box_1_slot_' ~ n ~ '_filament')\
+        \ %}\n{% set label = 'Slot ' ~ n ~ ' ' ~ (cname if cname not in ['','unknown','unavailable']\
+        \ else (flabel if flabel not in ['','unknown','unavailable'] else ('#' ~ (c\
+        \ | upper)))) %}\n{% set sp = namespace(id='', rem=0, fw=0) %}\n{% for e in\
+        \ integration_entities('spoolman') if e.endswith('_color_hex') %}\n{% if sp.id\
+        \ == '' and (state_attr(e[:-10],'location') | default('', true) | lower) ==\
+        \ ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10] %}\n{% set sp.rem = states(e[:-10])\
+        \ | float(0) %}\n{% set sp.fw = state_attr(e[:-10],'filament_weight') | float(0)\
+        \ %}\n{% endif %}\n{% endfor %}\n{% set pct = ((((sp.rem | float) / (sp.fw\
+        \ | float)) * 100) | round(0) | int) if (sp.fw | float) > 0 else 0 %}\n{%\
+        \ if sp.id != '' %}{% set ns.loaded = ns.loaded + [label ~ ': ' ~ (sp.rem\
+        \ | round(1)) ~ ' g (' ~ pct ~ '%)'] %}{% endif %}\n{% if sp.id != '' and\
+        \ single and n == aslot %}{% set ns.match_label = label %}{% set ns.match_rem\
+        \ = sp.rem %}{% endif %}\n{% if sp.id != '' %}\n{% if single and n == aslot\
+        \ %}\n{% if (sp.rem | float) < (job_g | float) %}{% set ns.short = ns.short\
+        \ + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g\
+        \ ~ ' g needed'] %}\n{% else %}{% set ns.ok = ns.ok + [label ~ ': ' ~ (sp.rem\
+        \ | round(1)) ~ ' g (' ~ pct ~ '%) left, ' ~ job_g ~ ' g needed'] %}{% endif\
+        \ %}\n{% elif single %}\n{% if (sp.rem | float) >= (job_g | float) %}{% set\
+        \ ns.cover = ns.cover + [label ~ ': ' ~ (sp.rem | round(1)) ~ ' g (' ~ pct\
+        \ ~ '%)'] %}\n{% else %}{% set ns.below = ns.below + [label ~ ': ' ~ (sp.rem\
+        \ | round(1)) ~ ' g (' ~ pct ~ '%)'] %}{% endif %}\n{% else %}\n{% if (sp.rem\
+        \ | float) < (job_g | float) %}{% set ns.short = ns.short + [label ~ ': '\
+        \ ~ (sp.rem | round(1)) ~ ' g (' ~ pct ~ '%) left, up to ' ~ job_g ~ ' g needed']\
+        \ %}\n{% else %}{% set ns.ok = ns.ok + [label ~ ': ' ~ (sp.rem | round(1))\
+        \ ~ ' g (' ~ pct ~ '%) left, up to ' ~ job_g ~ ' g needed'] %}{% endif %}\n\
+        {% endif %}\n{% elif job_g > 0 %}\n{% set ns.missing = ns.missing + [label\
+        \ ~ ' (#' ~ (c | upper) ~ ')'] %}\n{% endif %}\n{% endif %}\n{% endfor %}\n\
+        Job: {{ gcode_file if gcode_file not in ['','unknown','unavailable'] else\
+        \ (state_attr('sensor.sparkx_i7_print_status','file') | default('', true)\
+        \ | string).split('/')[-1] }}\nNeeds {{ job_g | round(1) }} g ({{ length_cm\
+        \ | round(1) }} cm) \xB7 used {{ used_g }} g \xB7 {{ rem_g }} g left to print\n\
+        Slicer: {{ (mc.list | join(', ')) if mc.list else 'material unknown' }} \xB7\
+        \ {{ ('single colour #' ~ (gcol | upper)) if single else ((gc.list | length)\
+        \ ~ ' colours') }}\n{% if job_g <= 0 %}Cannot verify: slicer filament estimate\
+        \ not available yet.{% if ns.loaded %}\nLoaded:\n- {{ ns.loaded | join('\\\
+        n- ') }}{% endif %}\n{% elif single and aslot != '' %}\n{% if ns.short %}NOT\
+        \ ENOUGH filament:\n- {{ ns.short | join('\\n- ') }}\n{% elif ns.match_label\
+        \ %}Enough filament: {{ ns.match_label }}: {{ ns.match_rem | round(1) }} g\
+        \ left, {{ job_g }} g needed.\n{% else %}Active slot {{ aslot }} has no Spoolman\
+        \ spool at CFS Lite, so remaining cannot be checked.{% endif %}\n{% elif single\
+        \ %}No exact colour match for the print colour #{{ gcol | upper }} in a loaded\
+        \ CFS slot, so the exact spool cannot be identified.{% if ns.cover %}\nWould\
+        \ cover {{ job_g }} g:\n- {{ ns.cover | join('\\n- ') }}{% endif %}{% if ns.below\
+        \ %}\nBelow {{ job_g }} g:\n- {{ ns.below | join('\\n- ') }}{% endif %}{%\
+        \ if not ns.cover and not ns.below %}\nNo loaded CFS slot has a matching Spoolman\
+        \ spool to compare.{% endif %}\n{% elif ns.short %}NOT ENOUGH filament - possible\
+        \ shortfall:\n- {{ ns.short | join('\\n- ') }}{% if ns.ok %}\nOK (would still\
+        \ cover the whole job):\n- {{ ns.ok | join('\\n- ') }}{% endif %}{% if ns.missing\
+        \ %}\nNo Spoolman spool matched for:\n- {{ ns.missing | join('\\n- ') }}{%\
+        \ endif %}\n{% elif ns.ok %}Enough filament:\n- {{ ns.ok | join('\\n- ') }}{%\
+        \ if ns.missing %}\nNo Spoolman spool matched for:\n- {{ ns.missing | join('\\\
+        n- ') }}{% endif %}\n{% elif ns.missing %}Could not match any loaded CFS slot\
+        \ to a Spoolman spool.{% endif %}"
+  - action: notify.persistent_notification
+    data:
+      title: Print started - filament check
+      message: '{{ report }}'
+  - action: notify.mobile_app_francos_ipad
+    data:
+      title: Print started - filament check
+      message: '{{ report }}'
+  - action: notify.mobile_app_sm_f956w
+    data:
+      title: Print started - filament check
+      message: '{{ report }}'
+  mode: single

.ha_mcp/backups/automation.automation.3d_print_complete_snapshot.20261003_151622.yaml

@@ -0,0 +1,39 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.3d_print_complete_snapshot
+captured: '2026-10-03T15:16:22.651698+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1787462132503'
+  alias: 3D Print Complete Snapshot - Telegram
+  description: Sends a Telegram photo with a SparkX i7 camera snapshot when a print
+    finishes successfully. Mobile completion notifications are handled by the Creality
+    integration.
+  triggers:
+  - entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+    trigger: state
+  actions:
+  - variables:
+      completion_message: '{% set file = trigger.to_state.attributes.get(''file'',
+        '''') %} {% set name = ''Print'' if file in ['''', none, ''unknown'', ''unavailable'']
+        else file.split(''/'')[-1].replace(''.gcode'', '''') %} {% set seconds = trigger.to_state.attributes.get(''job_time_s'',
+        0) | int(0) %} {{ name }} finished successfully at {{ now().strftime(''%I:%M
+        %p'').lstrip(''0'') }}. Total time: {% if seconds >= 3600 %}{{ seconds //
+        3600 }}h {{ ((seconds % 3600) // 60) }}m {% else %}{{ ((seconds % 3600) //
+        60) }}m{% endif %}'
+  - action: camera.snapshot
+    data:
+      filename: /config/www/sparkx_i7_complete_snapshot.jpg
+    target:
+      entity_id: camera.sparkx_i7_printer_camera
+  - action: telegram_bot.send_photo
+    data:
+      caption: '{{ completion_message }}'
+      file: /config/www/sparkx_i7_complete_snapshot.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  mode: single

.ha_mcp/backups/automation.automation.3d_print_complete_snapshot.20261003_151703.yaml

@@ -0,0 +1,78 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.3d_print_complete_snapshot
+captured: '2026-10-03T15:17:03.603772+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1787462132503'
+  alias: 3D Print Complete Snapshot - Telegram
+  description: Sends a Telegram photo with a SparkX i7 camera snapshot when a print
+    finishes successfully. Mobile completion notifications are handled by the Creality
+    integration.
+  triggers:
+  - entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+    trigger: state
+  actions:
+  - variables:
+      completion_message: '{% set file = trigger.to_state.attributes.get(''file'',
+        '''') %} {% set name = ''Print'' if file in ['''', none, ''unknown'', ''unavailable'']
+        else file.split(''/'')[-1].replace(''.gcode'', '''') %} {% set seconds = trigger.to_state.attributes.get(''job_time_s'',
+        0) | int(0) %} {{ name }} finished successfully at {{ now().strftime(''%I:%M
+        %p'').lstrip(''0'') }}. Total time: {% if seconds >= 3600 %}{{ seconds //
+        3600 }}h {{ ((seconds % 3600) // 60) }}m {% else %}{{ ((seconds % 3600) //
+        60) }}m{% endif %}'
+  - action: camera.snapshot
+    data:
+      filename: /config/www/sparkx_i7_complete_snapshot.jpg
+    target:
+      entity_id: camera.sparkx_i7_printer_camera
+  - variables:
+      sparkx_needs_light: '{{ not is_state(''light.sparkx_i7_light'', ''on'') }}'
+      bedroom_needs_light: '{{ not is_state(''light.bedroom_lamp_2'', ''on'') }}'
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - delay:
+      seconds: 3
+  - delay:
+      seconds: 2
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - action: telegram_bot.send_photo
+    data:
+      caption: '{{ completion_message }}'
+      file: /config/www/sparkx_i7_complete_snapshot.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  mode: single

.ha_mcp/backups/automation.automation.3d_print_early_layers_snapshot.20261001_234705.yaml

@@ -0,0 +1,126 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.3d_print_early_layers_snapshot
+captured: '2026-10-01T23:47:05.577959+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1787462157568'
+  alias: 3D Print Early Layers Snapshot
+  description: Telegram-only snapshots from all 3 printer cameras. Fires when Z crosses
+    1.0 mm, then again at 25%, 50% and 75% print progress. Lights the SparkX i7 and
+    bedroom lamp only if they are currently off, then restores whatever state they
+    were in before capturing.
+  triggers:
+  - above: 1
+    entity_id: sensor.sparkx_i7_position_z
+    trigger: numeric_state
+  - above: 25
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 50
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 75
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      milestone: '{% set source = trigger.get(''entity_id'', '''') %} {% set tstate
+        = trigger.get(''to_state'') %} {% set value = tstate.state | float(0) if tstate
+        else 0 %} {% if source == ''sensor.sparkx_i7_position_z'' %} First layers
+        (Z {{ value }} mm) {% elif source == ''sensor.sparkx_i7_print_progress'' %}
+        {% if value >= 75 %} 75% complete {% elif value >= 50 %} 50% complete {% else
+        %} 25% complete {% endif %} {% else %} Manual test {% endif %}'
+      tag: '{% set source = trigger.get(''entity_id'', '''') %} {% if source == ''sensor.sparkx_i7_position_z''
+        %} z1 {% elif source == ''sensor.sparkx_i7_print_progress'' %} p{{ trigger.get(''above'',
+        0) | int }} {% else %} test {% endif %}'
+  - variables:
+      bedroom_needs_light: '{{ not is_state(''light.bedroom_lamp_2'', ''on'') }}'
+      message: "{% set file = state_attr('sensor.sparkx_i7_print_status', 'file')\
+        \ or '' %} {% set name = 'Print' if file in ['', none, 'unknown', 'unavailable']\
+        \ else file.split('/')[-1].replace('.gcode', '') %} {% set pct = states('sensor.sparkx_i7_print_progress')\
+        \ | int(0) %} {% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+        \ %} 3D print \xB7 {{ milestone }} \xB7 {{ name }} at {{ pct }}%{% if left\
+        \ > 0 %} \xB7 {{ (left // 3600) }}h {{ ((left % 3600) // 60) }}m left{% endif\
+        \ %}"
+      sparkx_needs_light: '{{ not is_state(''light.sparkx_i7_light'', ''on'') }}'
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - delay:
+      seconds: 3
+  - parallel:
+    - action: camera.snapshot
+      data:
+        filename: /config/www/sparkx_{{ tag }}.jpg
+      target:
+        entity_id: camera.sparkx_i7_printer_camera
+    - action: camera.snapshot
+      data:
+        filename: /config/www/ender5_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera_duckdns_org
+    - action: camera.snapshot
+      data:
+        filename: /config/www/ender_cam2_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera2_duckdns_org
+  - delay:
+      seconds: 2
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - action: telegram_bot.send_photo
+    data:
+      caption: "SparkX i7 \u2014 {{ message }}"
+      file: /config/www/sparkx_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  - action: telegram_bot.send_photo
+    data:
+      caption: "Back Camera \u2014 {{ message }}"
+      file: /config/www/ender5_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  - action: telegram_bot.send_photo
+    data:
+      caption: "Bed Camera \u2014 {{ message }}"
+      file: /config/www/ender_cam2_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  max: 4
+  mode: parallel

.ha_mcp/backups/automation.automation.3d_print_early_layers_snapshot.20261001_234931.yaml

@@ -0,0 +1,122 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.3d_print_early_layers_snapshot
+captured: '2026-10-01T23:49:31.000350+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1787462157568'
+  alias: 3D Print Early Layers Snapshot
+  description: Telegram-only snapshots from all 3 printer cameras. Fires when Z crosses
+    1.0 mm, then again at 25%, 50% and 75% print progress. Lights the SparkX i7 and
+    bedroom lamp only if they are currently off, then restores whatever state they
+    were in before capturing.
+  triggers:
+  - above: 5
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 25
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 50
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  - above: 75
+    entity_id: sensor.sparkx_i7_print_progress
+    trigger: numeric_state
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - variables:
+      milestone: '{% set above = trigger.get(''above'', 0) | int(0) %}{% if above
+        >= 75 %} 75% complete{% elif above >= 50 %} 50% complete{% elif above >= 25
+        %} 25% complete{% elif above >= 5 %} 5% complete{% else %} Print progress
+        {{ above }}%{% endif %}'
+      tag: p{{ trigger.get('above', 0) | int(0) }}
+  - variables:
+      bedroom_needs_light: '{{ not is_state(''light.bedroom_lamp_2'', ''on'') }}'
+      message: "{% set file = state_attr('sensor.sparkx_i7_print_status', 'file')\
+        \ or '' %} {% set name = 'Print' if file in ['', none, 'unknown', 'unavailable']\
+        \ else file.split('/')[-1].replace('.gcode', '') %} {% set pct = states('sensor.sparkx_i7_print_progress')\
+        \ | int(0) %} {% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+        \ %} 3D print \xB7 {{ milestone }} \xB7 {{ name }} at {{ pct }}%{% if left\
+        \ > 0 %} \xB7 {{ (left // 3600) }}h {{ ((left % 3600) // 60) }}m left{% endif\
+        \ %}"
+      sparkx_needs_light: '{{ not is_state(''light.sparkx_i7_light'', ''on'') }}'
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_on
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - delay:
+      seconds: 3
+  - parallel:
+    - action: camera.snapshot
+      data:
+        filename: /config/www/sparkx_{{ tag }}.jpg
+      target:
+        entity_id: camera.sparkx_i7_printer_camera
+    - action: camera.snapshot
+      data:
+        filename: /config/www/ender5_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera_duckdns_org
+    - action: camera.snapshot
+      data:
+        filename: /config/www/ender_cam2_{{ tag }}.jpg
+      target:
+        entity_id: camera.endercamera2_duckdns_org
+  - delay:
+      seconds: 2
+  - if:
+    - condition: template
+      value_template: '{{ sparkx_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.sparkx_i7_light
+  - if:
+    - condition: template
+      value_template: '{{ bedroom_needs_light }}'
+    then:
+    - action: light.turn_off
+      continue_on_error: true
+      target:
+        entity_id: light.bedroom_lamp_2
+  - action: telegram_bot.send_photo
+    data:
+      caption: "SparkX i7 \u2014 {{ message }}"
+      file: /config/www/sparkx_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  - action: telegram_bot.send_photo
+    data:
+      caption: "Back Camera \u2014 {{ message }}"
+      file: /config/www/ender5_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  - action: telegram_bot.send_photo
+    data:
+      caption: "Bed Camera \u2014 {{ message }}"
+      file: /config/www/ender_cam2_{{ tag }}.jpg
+      parse_mode: plain_text
+    target:
+      entity_id: notify.franco
+  max: 4
+  mode: parallel

.ha_mcp/backups/automation.automation.basement_temperature_change.20261004_233218.yaml

@@ -0,0 +1,25 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.basement_temperature_change
+captured: '2026-10-04T23:32:18.963450+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1781793117883'
+  alias: Basement Temperature Change
+  description: ''
+  triggers:
+  - trigger: numeric_state
+    entity_id: sensor.basement_temperature
+    above: 15
+  - trigger: numeric_state
+    entity_id: sensor.basement_temperature
+    below: 10
+  conditions: []
+  actions:
+  - action: notify.notify
+    metadata: {}
+    data:
+      title: Basement Temperature Change
+      message: Basement Temperature Changed!
+  mode: single

.ha_mcp/backups/automation.automation.cfs_box_1_desiccant_pack_due.20261002_204840.yaml

@@ -0,0 +1,34 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.cfs_box_1_desiccant_pack_due
+captured: '2026-10-02T20:48:40.265891+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1790973987624'
+  alias: CFS Box 1 - Desiccant Pack Due
+  description: 'Notify when the SparkX i7 CFS box 1 humidity stays at or above 34%
+
+    for 60 minutes, meaning the desiccant pack needs replacing. The short spikes
+
+    that happen when the box is opened to swap a filament never last that long.'
+  triggers:
+  - above: 33.9
+    entity_id: sensor.sparkx_i7_cfs_box_1_humidity
+    for:
+      minutes: 60
+    trigger: numeric_state
+  actions:
+  - action: notify.notify
+    data:
+      message: CFS box 1 humidity has been {{ reading }}% or higher for 60 minutes
+        (threshold 34%). Time to replace the desiccant pack.
+      title: 'CFS Box 1: replace desiccant pack'
+  - action: notify.persistent_notification
+    data:
+      message: CFS box 1 humidity has been {{ reading }}% or higher for 60 minutes
+        (threshold 34%). Time to replace the desiccant pack.
+      title: 'CFS Box 1: replace desiccant pack'
+  mode: single
+  variables:
+    reading: '{{ trigger.to_state.state | float | round(0) | int }}'

.ha_mcp/backups/automation.automation.printer_finished.20261010_064542.yaml

@@ -0,0 +1,34 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.printer_finished
+captured: '2026-10-10T06:45:42.166180+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791614551939'
+  alias: Printer finished
+  description: Sets the job filament helper and notifies when the print reaches 98%
+    completion.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_moonraker_progress
+    to: '98'
+  conditions: []
+  actions:
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.job_filament
+    data:
+      value: '{{ states.sensor.sparkx_moonraker_filament_used.state_with_unit }}'
+  - action: notify.franco
+    data:
+      message: TTS
+      title: Printing complete
+      data:
+        tts_text: Print job is complete
+  - action: notify.franco
+    data:
+      title: "\U0001F5A8 Printer finished"
+      message: Printer job has finished
+      data: {}
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_163433.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T16:34:33.721483+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: template
+    value_template: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+      > 0 }}'
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_163445.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T16:34:45.914807+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: template
+    value_template: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+      > 0 }}'
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_174757.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T17:47:57.827554+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: numeric_state
+    entity_id: sensor.sparkx_i7_filament_weight_estimated
+    above: 0
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_174935.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T17:49:35.306437+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: numeric_state
+    entity_id: sensor.sparkx_i7_filament_weight_estimated
+    above: 0
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261008_175027.yaml

@@ -0,0 +1,57 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-08T17:50:27.997890+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions:
+  - condition: numeric_state
+    entity_id: sensor.sparkx_i7_filament_weight_estimated
+    above: 0
+  actions:
+  - variables:
+      weight: '{{ states(''sensor.sparkx_i7_filament_weight_estimated'') | float(0)
+        }}'
+      spool_id: '{{ states(''input_text.sparkx_i7_print_spool_latch'') | int(0) }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id > 0 }}'
+      sequence:
+      - action: spoolman.use_spool_filament
+        data:
+          id: '{{ spool_id | int(0) }}'
+          use_weight: '{{ weight | float(0) }}'
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+    - conditions:
+        condition: template
+        value_template: '{{ spool_id <= 0 }}'
+      sequence:
+      - action: notify.persistent_notification
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: Spoolman deduction skipped
+          message: "Print completed: {{ weight }} g used, but no Spoolman spool was\
+            \ latched for this print \u2014 nothing deducted."
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261011_035239.yaml

@@ -0,0 +1,141 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-11T03:52:39.789581+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    slot, then sends a summary notification with total and per-slot breakdown whenever
+    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions: []
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color and (state_attr(e[:-10], ''location'') | default('''', true)
+        | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+        > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{%
+        endif %}{% endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete.20261012_010458.yaml

@@ -0,0 +1,152 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+captured: '2026-10-12T01:04:58.210558+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238729'
+  alias: SparkX i7 - Deduct filament in Spoolman on print complete
+  description: On print completion, deducts the final segment (used_material_length
+    delta since last checkpoint x g/cm) from the Spoolman spool in the CFS Lite location
+    matching the latched slot color (remaining weight > 0 guard), accumulates it per
+    slot, then sends a summary notification with total and per-slot breakdown whenever
+    anything was deducted. Silent when total is 0. Clears the latch and re-baselines
+    the checkpoint.
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    from: printing
+    to: completed
+  conditions: []
+  actions:
+  - variables:
+      old_slot: '{{ states(''input_text.sparkx_i7_print_spool_latch'') }}'
+      cur: '{{ states(''sensor.sparkx_i7_used_material_length'') | float(0) }}'
+      checkpoint: '{{ states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+        | float(0) }}'
+  - variables:
+      final_grams: '{{ (([cur | float - (checkpoint | float), 0] | max) * (states(''input_number.sparkx_i7_filament_g_cm'')
+        | float(0.03))) | round(2) }}'
+      color: '{{ states(''sensor.sparkx_i7_cfs_'' ~ (old_slot | lower | replace(''
+        '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower }}'
+  - variables:
+      spool_id: '{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (states(e) | replace(''#'', '''') |
+        lower) == color and (state_attr(e[:-10], ''location'') | default('''', true)
+        | lower) == ''cfs lite'' %}{% set b = e[:-10] %}{% if (states(b) | float(0))
+        > 0 and ns.id == '''' %}{% set ns.id = states(b ~ ''_id'') %}{% endif %}{%
+        endif %}{% endfor %}{{ ns.id }}'
+  - variables:
+      helper_idx: '{{ old_slot.split('' '')[-1] if old_slot.split('' '')[-1] in [''1'',
+        ''2'', ''3'', ''4''] else '''' }}'
+  - variables:
+      nonhelper_g: '{{ final_grams if (final_grams | float > 0) and (spool_id not
+        in ['''', ''unknown'', ''unavailable'']) and (helper_idx == '''') else 0 }}'
+  - if:
+      condition: template
+      value_template: '{{ final_grams | float > 0 }}'
+    then:
+    - choose:
+      - conditions:
+          condition: template
+          value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable'']
+            }}'
+        sequence:
+        - action: spoolman.use_spool_filament
+          data:
+            id: '{{ spool_id | int(0) }}'
+            use_weight: '{{ final_grams | float(0) }}'
+        - if:
+            condition: template
+            value_template: '{{ helper_idx != '''' }}'
+          then:
+          - action: input_number.set_value
+            target:
+              entity_id: input_number.sparkx_i7_slot_{{ helper_idx }}_grams
+            data:
+              value: '{{ (states(''input_number.sparkx_i7_slot_'' ~ helper_idx ~ ''_grams'')
+                | float(0)) + (final_grams | float) }}'
+      default:
+      - action: notify.persistent_notification
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_francos_ipad
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+      - action: notify.mobile_app_sm_f956w
+        data:
+          title: 'Spoolman: no spool for slot color'
+          message: 'Print completed: final segment of {{ final_grams }} g from {{
+            old_slot if old_slot else ''the active slot'' }} (color #{{ color | upper
+            }}) could not be deducted - no Spoolman spool in the CFS Lite location
+            with remaining weight matches that color. Register the new roll in Spoolman
+            with location CFS Lite, then adjust manually if needed.'
+  - variables:
+      summary_total: '{% set ns = namespace(t = 0) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.t = ns.t + g %}{% endif %}{% endfor %}{{
+        (ns.t + (nonhelper_g | float)) | round(1) }}'
+  - variables:
+      summary_lines: '{% set ns = namespace(l = []) %}{% for n in [''1'', ''2'', ''3'',
+        ''4''] %}{% set g = states(''input_number.sparkx_i7_slot_'' ~ n ~ ''_grams'')
+        | float(0) %}{% if g > 0 %}{% set ns.l = ns.l + [''Slot '' ~ n ~ '' ('' ~
+        states(''sensor.sparkx_i7_slot_'' ~ n ~ ''_color_name'') ~ ''): '' ~ (g |
+        round(1)) ~ '' g''] %}{% endif %}{% endfor %}{% if nonhelper_g | float > 0
+        %}{% set ns.l = ns.l + [(old_slot if old_slot else ''Unlatched'') ~ '': ''
+        ~ (nonhelper_g | float | round(1)) ~ '' g''] %}{% endif %}{{ ns.l | join(''\n'')
+        }}'
+  - if:
+      condition: template
+      value_template: '{{ summary_total | float > 0 }}'
+    then:
+    - action: notify.persistent_notification
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_francos_ipad
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+    - action: notify.mobile_app_sm_f956w
+      data:
+        title: Print complete - Spoolman updated
+        message: 'Print complete - Spoolman deducted {{ summary_total }} g
+
+          {{ summary_lines }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_last_job_filament_weight
+    data:
+      value: '{{ final_grams }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_last_job_cost
+    data:
+      value: '{{ ((final_grams | float) * (states(''input_number.filament_price_per_kg'')
+        | float(25)) / 1000) | round(2) }}'
+  - action: input_number.set_value
+    target:
+      entity_id: input_number.sparkx_i7_spoolman_length_checkpoint
+    data:
+      value: '{{ cur }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: ''
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_latch_print_spool_for_spoolman.20261008_163433.yaml

@@ -0,0 +1,53 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_latch_print_spool_for_spoolman
+captured: '2026-10-08T16:34:33.495188+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+  - trigger: state
+    entity_id:
+    - sensor.sparkx_i7_cfs_box_1_slot_1_color
+    - sensor.sparkx_i7_cfs_box_1_slot_2_color
+    - sensor.sparkx_i7_cfs_box_1_slot_3_color
+    - sensor.sparkx_i7_cfs_box_1_slot_4_color
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ trigger.entity_id == ''sensor.sparkx_i7_print_status''
+          }}'
+      sequence:
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+  - variables:
+      spool_id: "{%- set slot = states('sensor.sparkx_i7_active_filament_slot') -%}\n\
+        {%- set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_'))\
+        \ ~ '_color' -%}\n{%- set color = states(ce) | replace('#', '') | lower -%}\n\
+        {%- set ns = namespace(id = '') -%}\n{%- for e in integration_entities('spoolman')\
+        \ -%}\n  {%- if e.endswith('_color_hex') and (states(e) | lower) == color\
+        \ -%}\n    {%- set ns.id = states(e[:-10] ~ '_id') -%}\n  {%- endif -%}\n\
+        {%- endfor -%}\n{{ ns.id }}"
+  - condition: template
+    value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable''] }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: '{{ spool_id }}'
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_latch_print_spool_for_spoolman.20261008_163446.yaml

@@ -0,0 +1,53 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_latch_print_spool_for_spoolman
+captured: '2026-10-08T16:34:46.060135+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+  - trigger: state
+    entity_id:
+    - sensor.sparkx_i7_cfs_box_1_slot_1_color
+    - sensor.sparkx_i7_cfs_box_1_slot_2_color
+    - sensor.sparkx_i7_cfs_box_1_slot_3_color
+    - sensor.sparkx_i7_cfs_box_1_slot_4_color
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ trigger.entity_id == ''sensor.sparkx_i7_print_status''
+          }}'
+      sequence:
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+  - variables:
+      spool_id: "{%- set slot = states('sensor.sparkx_i7_active_filament_slot') -%}\n\
+        {%- set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_'))\
+        \ ~ '_color' -%}\n{%- set color = states(ce) | replace('#', '') | lower -%}\n\
+        {%- set ns = namespace(id = '') -%}\n{%- for e in integration_entities('spoolman')\
+        \ -%}\n  {%- if e.endswith('_color_hex') and (states(e) | lower) == color\
+        \ -%}\n    {%- set ns.id = states(e[:-10] ~ '_id') -%}\n  {%- endif -%}\n\
+        {%- endfor -%}\n{{ ns.id }}"
+  - condition: template
+    value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable''] }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: '{{ spool_id }}'
+  mode: single

.ha_mcp/backups/automation.automation.sparkx_i7_latch_print_spool_for_spoolman.20261008_174506.yaml

@@ -0,0 +1,53 @@
+# ha_mcp_backup
+schema_version: 1
+domain: automation
+entity_id: automation.sparkx_i7_latch_print_spool_for_spoolman
+captured: '2026-10-08T17:45:06.877265+00:00'
+tool: ha_config_set_automation
+config:
+  id: '1791477238762'
+  alias: SparkX i7 - Latch print spool for Spoolman
+  triggers:
+  - trigger: state
+    entity_id: sensor.sparkx_i7_print_status
+    to: printing
+    id: print_started
+  - trigger: state
+    entity_id: sensor.sparkx_i7_active_filament_slot
+  - trigger: state
+    entity_id:
+    - sensor.sparkx_i7_cfs_box_1_slot_1_color
+    - sensor.sparkx_i7_cfs_box_1_slot_2_color
+    - sensor.sparkx_i7_cfs_box_1_slot_3_color
+    - sensor.sparkx_i7_cfs_box_1_slot_4_color
+  conditions:
+  - condition: state
+    entity_id: sensor.sparkx_i7_print_status
+    state: printing
+  actions:
+  - choose:
+    - conditions:
+        condition: trigger
+        id: print_started
+      sequence:
+      - action: input_text.set_value
+        target:
+          entity_id: input_text.sparkx_i7_print_spool_latch
+        data:
+          value: ''
+  - variables:
+      spool_id: "{%- set slot = states('sensor.sparkx_i7_active_filament_slot') -%}\n\
+        {%- set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_'))\
+        \ ~ '_color' -%}\n{%- set color = states(ce) | replace('#', '') | lower -%}\n\
+        {%- set ns = namespace(id = '') -%}\n{%- for e in integration_entities('spoolman')\
+        \ -%}\n  {%- if e.endswith('_color_hex') and (states(e) | lower) == color\
+        \ -%}\n    {%- set ns.id = states(e[:-10] ~ '_id') -%}\n  {%- endif -%}\n\
+        {%- endfor -%}\n{{ ns.id }}"
+  - condition: template
+    value_template: '{{ spool_id not in ['''', ''unknown'', ''unavailable''] }}'
+  - action: input_text.set_value
+    target:
+      entity_id: input_text.sparkx_i7_print_spool_latch
+    data:
+      value: '{{ spool_id }}'
+  mode: single

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_171100.yaml

@@ -0,0 +1,205 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-15T17:11:00.335551+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - heading: Filament Usage
+        heading_style: title
+        type: heading
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent')\
+            \ %}\n  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff',\
+            \ '#fff'] else 'transparent' %}\n    {% set v.html = \"<div class='tube-bg'><div\
+            \ class='tube-fill' style='height: \" ~ pct ~ \"%; background-color: \"\
+            \ ~ hex_clean ~ \";'></div><div class='tube-text'>\" ~ remain ~ \"g</div></div>\"\
+            \ %}\n    {% set v.label = 'Slot ' ~ n %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap'>\"\
+            \ ~ v.html ~ \"<div class='slot-label'>\" ~ v.label ~ \"</div></div>\"\
+            \n    },\n    \"styles\": {\n      \"card\": [\n        {\"background\"\
+            : \"transparent\"},\n        {\"box-shadow\": \"none\"},\n        {\"\
+            border\": \"none\"},\n        {\"padding\": \"8px 2px\"},\n        {\"\
+            display\": \"flex\"},\n        {\"flex-direction\": \"column\"},\n   \
+            \     {\"align-items\": \"center\"}\n      ],\n      \"custom_fields\"\
+            : {\n        \"tube\": [\n          {\"width\": \"100%\"},\n         \
+            \ {\"display\": \"flex\"},\n          {\"flex-direction\": \"column\"\
+            },\n          {\"align-items\": \"center\"}\n        ]\n      }\n    },\n\
+            \    \"extra_styles\": \"\n      .tube-wrap {\n        display: flex;\n\
+            \        flex-direction: column;\n        align-items: center;\n     \
+            \   width: 100%;\n      }\n      .tube-bg {\n        position: relative;\n\
+            \        width: 60px;\n        height: 180px;\n        background-color:\
+            \ #dedede;\n        border-radius: 20px;\n        overflow: hidden;\n\
+            \        border: 1px solid \" ~ v.border ~ \";\n        display: flex;\n\
+            \        flex-direction: column;\n        justify-content: flex-end;\n\
+            \      }\n      .tube-empty {\n        background: transparent;\n    \
+            \    border: 2px dashed var(--error-color);\n      }\n      .tube-fill\
+            \ {\n        width: 100%;\n        border-radius: 0 0 19px 19px;\n   \
+            \   }\n      .tube-text {\n        position: absolute;\n        top: 48%;\n\
+            \        left: 50%;\n        transform: translate(-50%, -50%);\n     \
+            \   font-size: 13px;\n        font-weight: 800;\n        color: #111111;\n\
+            \        pointer-events: none;\n        z-index: 2;\n        white-space:\
+            \ nowrap;\n      }\n      .slot-label {\n        margin-top: 8px;\n  \
+            \      font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n    \",\n\
+            \    \"tap_action\": {\n      \"action\": \"more-info\" if sp.ent != ''\
+            \ else \"none\"\n    }\n  } %}\n\n  {% set ns.cards = ns.cards + [card]\
+            \ %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total (cm)
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:weight-gram
+        name: Current Job Weight (est.)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 20
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 12
+          yellow: 6
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_172140.yaml

@@ -0,0 +1,201 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-15T17:21:40.300831+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - heading: Filament Usage
+        heading_style: title
+        type: heading
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent')\
+            \ %}\n  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff',\
+            \ '#fff'] else 'transparent' %}\n    {% set v.html = \"<div class='tube-bg'><div\
+            \ class='tube-fill' style='height: \" ~ pct ~ \"%; background-color: \"\
+            \ ~ hex_clean ~ \";'></div><div class='tube-text'>\" ~ remain ~ \"g</div></div>\"\
+            \ %}\n    {% set v.label = 'Slot ' ~ n %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap'>\"\
+            \ ~ v.html ~ \"<div class='slot-label'>\" ~ v.label ~ \"</div></div>\"\
+            \n    },\n    \"styles\": {\n      \"card\": [\n        {\"background\"\
+            : \"transparent\"},\n        {\"box-shadow\": \"none\"},\n        {\"\
+            border\": \"none\"},\n        {\"padding\": \"8px 2px\"},\n        {\"\
+            display\": \"flex\"},\n        {\"flex-direction\": \"column\"},\n   \
+            \     {\"align-items\": \"center\"}\n      ],\n      \"custom_fields\"\
+            : {\n        \"tube\": [\n          {\"width\": \"100%\"},\n         \
+            \ {\"display\": \"flex\"},\n          {\"flex-direction\": \"column\"\
+            },\n          {\"align-items\": \"center\"}\n        ]\n      }\n    },\n\
+            \    \"extra_styles\": \"\n      .tube-wrap {\n        display: flex;\n\
+            \        flex-direction: column;\n        align-items: center;\n     \
+            \   width: 100%;\n      }\n      .tube-bg {\n        position: relative;\n\
+            \        width: 60px;\n        height: 180px;\n        background-color:\
+            \ #dedede;\n        border-radius: 20px;\n        overflow: hidden;\n\
+            \        border: 1px solid \" ~ v.border ~ \";\n        display: flex;\n\
+            \        flex-direction: column;\n        justify-content: flex-end;\n\
+            \      }\n      .tube-empty {\n        background: transparent;\n    \
+            \    border: 2px dashed var(--error-color);\n      }\n      .tube-fill\
+            \ {\n        width: 100%;\n        border-radius: 0 0 19px 19px;\n   \
+            \   }\n      .tube-text {\n        position: absolute;\n        top: 48%;\n\
+            \        left: 50%;\n        transform: translate(-50%, -50%);\n     \
+            \   font-size: 13px;\n        font-weight: 800;\n        color: #111111;\n\
+            \        pointer-events: none;\n        z-index: 2;\n        white-space:\
+            \ nowrap;\n      }\n      .slot-label {\n        margin-top: 8px;\n  \
+            \      font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n    \",\n\
+            \    \"tap_action\": {\n      \"action\": \"more-info\" if sp.ent != ''\
+            \ else \"none\"\n    }\n  } %}\n\n  {% set ns.cards = ns.cards + [card]\
+            \ %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        name: Print ETA
+        type: tile
+        vertical: false
+        grid_options:
+          columns: 6
+          rows: 1
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          yellow: 12
+          red: 24
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_174011.yaml

@@ -0,0 +1,404 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-15T17:40:11.907712+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='') %}\n  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent,\
+            \ 'filament_color_hex') | default('44739e') %}\n    {% set hex_clean =\
+            \ hex if hex.startswith('#') else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent,\
+            \ 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1)\
+            \ %}\n    {% set total = state_attr(sp.ent, 'filament_weight') | float(1000)\
+            \ %}\n    {% set raw_pct = ((remain / total) * 100) | round(1) if total\
+            \ > 0 else 0 %}\n    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct\
+            \ > 100 else raw_pct) %}\n    {% set rem_n = states(sp.ent) | float(-1)\
+            \ %}\n    {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n\
+            \ >= 0 and rem_n < 100) else 0) %}\n    {% set v.wrap = ' warn-crit' if\
+            \ band == 2 else (' warn-low' if band == 1 else '') %}\n    {% set v.border\
+            \ = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent'\
+            \ %}\n    {% set v.html = \"<div class='tube-bg'><div class='tube-fill'\
+            \ style='height: \" ~ pct ~ \"%; background-color: \" ~ hex_clean ~ \"\
+            ;'></div><div class='tube-text'>\" ~ remain ~ \"g</div></div>\" %}\n \
+            \   {% set v.label = 'Slot ' ~ n ~ (' \u26A0' if band > 0 else '') %}\n\
+            \  {% else %}\n    {% set v.html = \"<div class='tube-bg tube-empty'></div>\"\
+            \ %}\n    {% set v.label = \"<span class='slot-warn'>Slot \" ~ n ~ \"\
+            \ \u2014 empty</span>\" %}\n  {% endif %}\n  {% set card = {\n    \"type\"\
+            : \"custom:button-card\",\n    \"entity\": sp.ent if sp.ent != '' else\
+            \ 'sensor.sparkx_i7_active_filament_slot',\n    \"show_icon\": false,\n\
+            \    \"show_state\": false,\n    \"show_name\": false,\n    \"custom_fields\"\
+            : {\n      \"tube\": \"<div class='tube-wrap\" ~ v.wrap ~ \"'>\" ~ v.html\
+            \ ~ \"<div class='slot-label'>\" ~ v.label ~ \"</div></div>\"\n    },\n\
+            \    \"styles\": {\n      \"card\": [\n        {\"background\": \"transparent\"\
+            },\n        {\"box-shadow\": \"none\"},\n        {\"border\": \"none\"\
+            },\n        {\"padding\": \"8px 2px\"},\n        {\"display\": \"flex\"\
+            },\n        {\"flex-direction\": \"column\"},\n        {\"align-items\"\
+            : \"center\"}\n      ],\n      \"custom_fields\": {\n        \"tube\"\
+            : [\n          {\"width\": \"100%\"},\n          {\"display\": \"flex\"\
+            },\n          {\"flex-direction\": \"column\"},\n          {\"align-items\"\
+            : \"center\"}\n        ]\n      }\n    },\n    \"extra_styles\": \"\n\
+            \      .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: #111111;\n        pointer-events: none;\n        z-index: 2;\n\
+            \        white-space: nowrap;\n      }\n      .slot-label {\n        margin-top:\
+            \ 8px;\n        font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n      .warn-low\
+            \ .tube-bg {\n        background-color: #fff6df;\n        outline: 2px\
+            \ solid var(--warning-color);\n      }\n      .warn-low .slot-label {\n\
+            \        color: var(--warning-color);\n      }\n      .warn-crit .tube-bg\
+            \ {\n        background-color: #fdecea;\n        outline: 2px solid var(--error-color);\n\
+            \      }\n      .warn-crit .slot-label {\n        color: var(--error-color);\n\
+            \      }\n    \",\n    \"tap_action\": {\n      \"action\": \"more-info\"\
+            \ if sp.ent != '' else \"none\"\n    }\n  } %}\n\n  {% set ns.cards =\
+            \ ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state == ''none'' %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set v = namespace(state='unknown', label='check\
+          \ unavailable') %}\n{% if job_g <= 0 %}\n{% set v.state = 'none' %}\n{%\
+          \ set v.label = 'no slicer estimate yet' %}\n{% elif s.short %}\n{% set\
+          \ v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH' %}\n{% elif s.ok %}\n\
+          {% set v.state = 'ok' %}\n{% set v.label = 'enough' %}\n{% elif single and\
+          \ aslot == '' %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no active\
+          \ CFS slot' %}\n{% elif single and not s.active %}\n{% set v.state = 'unknown'\
+          \ %}\n{% set v.label = 'active slot has no spool' %}\n{% elif s.matched\
+          \ == 0 %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no spool loaded'\
+          \ %}\n{% endif %}\n{{ job_g }} g needed \xB7 {{ used_g }} g used"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set v = namespace(state='unknown', label='check\
+          \ unavailable') %}\n{% if job_g <= 0 %}\n{% set v.state = 'none' %}\n{%\
+          \ set v.label = 'no slicer estimate yet' %}\n{% elif s.short %}\n{% set\
+          \ v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH' %}\n{% elif s.ok %}\n\
+          {% set v.state = 'ok' %}\n{% set v.label = 'enough' %}\n{% elif single and\
+          \ aslot == '' %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no active\
+          \ CFS slot' %}\n{% elif single and not s.active %}\n{% set v.state = 'unknown'\
+          \ %}\n{% set v.label = 'active slot has no spool' %}\n{% elif s.matched\
+          \ == 0 %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no spool loaded'\
+          \ %}\n{% endif %}\n{{ rem_g }} g left to print \xB7 {{ v.label }}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261015_210106.yaml

@@ -0,0 +1,421 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-15T21:01:06.734288+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='') %}\n  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent,\
+            \ 'filament_color_hex') | default('44739e') %}\n    {% set hex_clean =\
+            \ hex if hex.startswith('#') else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent,\
+            \ 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1)\
+            \ %}\n    {% set total = state_attr(sp.ent, 'filament_weight') | float(1000)\
+            \ %}\n    {% set raw_pct = ((remain / total) * 100) | round(1) if total\
+            \ > 0 else 0 %}\n    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct\
+            \ > 100 else raw_pct) %}\n    {% set rem_n = states(sp.ent) | float(-1)\
+            \ %}\n    {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n\
+            \ >= 0 and rem_n < 100) else 0) %}\n    {% set v.wrap = ' warn-crit' if\
+            \ band == 2 else (' warn-low' if band == 1 else '') %}\n    {% set v.border\
+            \ = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent'\
+            \ %}\n    {% set v.html = \"<div class='tube-bg'><div class='tube-fill'\
+            \ style='height: \" ~ pct ~ \"%; background-color: \" ~ hex_clean ~ \"\
+            ;'></div><div class='tube-text'>\" ~ remain ~ \"g</div></div>\" %}\n \
+            \   {% set v.label = 'Slot ' ~ n ~ (' \u26A0' if band > 0 else '') %}\n\
+            \  {% else %}\n    {% set v.html = \"<div class='tube-bg tube-empty'></div>\"\
+            \ %}\n    {% set v.label = \"<span class='slot-warn'>Slot \" ~ n ~ \"\
+            \ \u2014 empty</span>\" %}\n  {% endif %}\n  {% set card = {\n    \"type\"\
+            : \"custom:button-card\",\n    \"entity\": sp.ent if sp.ent != '' else\
+            \ 'sensor.sparkx_i7_active_filament_slot',\n    \"show_icon\": false,\n\
+            \    \"show_state\": false,\n    \"show_name\": false,\n    \"custom_fields\"\
+            : {\n      \"tube\": \"<div class='tube-wrap\" ~ v.wrap ~ \"'>\" ~ v.html\
+            \ ~ \"<div class='slot-label'>\" ~ v.label ~ \"</div></div>\"\n    },\n\
+            \    \"styles\": {\n      \"card\": [\n        {\"background\": \"transparent\"\
+            },\n        {\"box-shadow\": \"none\"},\n        {\"border\": \"none\"\
+            },\n        {\"padding\": \"8px 2px\"},\n        {\"display\": \"flex\"\
+            },\n        {\"flex-direction\": \"column\"},\n        {\"align-items\"\
+            : \"center\"}\n      ],\n      \"custom_fields\": {\n        \"tube\"\
+            : [\n          {\"width\": \"100%\"},\n          {\"display\": \"flex\"\
+            },\n          {\"flex-direction\": \"column\"},\n          {\"align-items\"\
+            : \"center\"}\n        ]\n      }\n    },\n    \"extra_styles\": \"\n\
+            \      .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: #111111;\n        pointer-events: none;\n        z-index: 2;\n\
+            \        white-space: nowrap;\n      }\n      .slot-label {\n        margin-top:\
+            \ 8px;\n        font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n      .warn-low\
+            \ .tube-bg {\n        background-color: #fff6df;\n        outline: 2px\
+            \ solid var(--warning-color);\n      }\n      .warn-low .slot-label {\n\
+            \        color: var(--warning-color);\n      }\n      .warn-crit .tube-bg\
+            \ {\n        background-color: #fdecea;\n        outline: 2px solid var(--error-color);\n\
+            \      }\n      .warn-crit .slot-label {\n        color: var(--error-color);\n\
+            \      }\n    \",\n    \"tap_action\": {\n      \"action\": \"more-info\"\
+            \ if sp.ent != '' else \"none\"\n    }\n  } %}\n\n  {% set ns.cards =\
+            \ ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_140314.yaml

@@ -0,0 +1,428 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T14:03:14.258687+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}\n{% for n in [1, 2, 3, 4]\
+            \ %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor\
+            \ %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap {\n      \
+            \  display: flex;\n        flex-direction: column;\n        align-items:\
+            \ center;\n        width: 100%;\n      }\n      .tube-bg {\n        position:\
+            \ relative;\n        width: 60px;\n        height: 180px;\n        background-color:\
+            \ #dedede;\n        border-radius: 20px;\n        overflow: hidden;\n\
+            \        border: 1px solid \" ~ v.border ~ \";\n        display: flex;\n\
+            \        flex-direction: column;\n        justify-content: flex-end;\n\
+            \      }\n      .tube-empty {\n        background: transparent;\n    \
+            \    border: 2px dashed var(--error-color);\n      }\n      .tube-fill\
+            \ {\n        width: 100%;\n        border-radius: 0 0 19px 19px;\n   \
+            \   }\n      .tube-text {\n        position: absolute;\n        top: 48%;\n\
+            \        left: 50%;\n        transform: translate(-50%, -50%);\n     \
+            \   font-size: 13px;\n        font-weight: 800;\n        color: \" ~ v.text\
+            \ ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo\
+            \ ~ \";\n        pointer-events: none;\n        z-index: 2;\n        white-space:\
+            \ nowrap;\n      }\n      .slot-label {\n        margin-top: 8px;\n  \
+            \      font-size: 12px;\n        font-weight: 700;\n        letter-spacing:\
+            \ 0.3px;\n        color: var(--secondary-text-color);\n      }\n     \
+            \ .slot-warn {\n        color: var(--error-color);\n      }\n      .warn-low\
+            \ .tube-bg {\n        background-color: #fff6df;\n        outline: 2px\
+            \ solid var(--warning-color);\n      }\n      .warn-low .slot-label {\n\
+            \        color: var(--warning-color);\n      }\n      .warn-crit .tube-bg\
+            \ {\n        background-color: #fdecea;\n        outline: 2px solid var(--error-color);\n\
+            \      }\n      .warn-crit .slot-label {\n        color: var(--error-color);\n\
+            \      }\n    \",\n    \"tap_action\": {\n      \"action\": \"more-info\"\
+            \ if sp.ent != '' else \"none\"\n    }\n  } %}\n\n  {% set ns.cards =\
+            \ ns.cards + [card] %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_201126.yaml

@@ -0,0 +1,433 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:11:26.000588+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_201344.yaml

@@ -0,0 +1,501 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:13:44.170829+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: Slot 1
+          icon: mdi:printer-filament
+          multiline_secondary: true
+          primary: ''
+          secondary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}This print so far: {{ live | round(1) }} g{% else %}Last print:
+            {{ (states(''input_number.sparkx_i7_slot_1_grams'') | float(0)) | round(1)
+            }} g{% endif %}'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: Slot 2
+          icon: mdi:printer-filament
+          multiline_secondary: true
+          primary: ''
+          secondary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}This print so far: {{ live | round(1) }} g{% else %}Last print:
+            {{ (states(''input_number.sparkx_i7_slot_2_grams'') | float(0)) | round(1)
+            }} g{% endif %}'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: Slot 3
+          icon: mdi:printer-filament
+          multiline_secondary: true
+          primary: ''
+          secondary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}This print so far: {{ live | round(1) }} g{% else %}Last print:
+            {{ (states(''input_number.sparkx_i7_slot_3_grams'') | float(0)) | round(1)
+            }} g{% endif %}'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: Slot 4
+          icon: mdi:printer-filament
+          multiline_secondary: true
+          primary: ''
+          secondary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}This print so far: {{ live | round(1) }} g{% else %}Last print:
+            {{ (states(''input_number.sparkx_i7_slot_4_grams'') | float(0)) | round(1)
+            }} g{% endif %}'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_201607.yaml

@@ -0,0 +1,497 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:16:07.146764+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          icon: mdi:weight-gram
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          icon: mdi:weight-gram
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          icon: mdi:weight-gram
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          icon: mdi:weight-gram
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_201746.yaml

@@ -0,0 +1,497 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:17:46.982906+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          icon: none
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          icon: none
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          icon: none
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          icon: none
+          multiline_secondary: false
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }} g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }} g{% endif %}'
+          secondary: ''
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_202143.yaml

@@ -0,0 +1,501 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:21:43.818350+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; font-size: 11px; padding: 2px; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; font-size: 11px; padding: 2px; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; font-size: 11px; padding: 2px; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; font-size: 11px; padding: 2px; }'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_202947.yaml

@@ -0,0 +1,505 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:29:47.993746+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; padding: 0 4px; font-size: 12px; line-height:
+              1.2; } .mushroom-state { text-align: left; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; padding: 0 4px; font-size: 12px; line-height:
+              1.2; } .mushroom-state { text-align: left; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; padding: 0 4px; font-size: 12px; line-height:
+              1.2; } .mushroom-state { text-align: left; }'
+        - type: custom:mushroom-template-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          icon: none
+          primary: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          secondary: ''
+          card_mod:
+            style: 'ha-card { text-align: left; padding: 0 4px; font-size: 12px; line-height:
+              1.2; } .mushroom-state { text-align: left; }'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_203024.yaml

@@ -0,0 +1,581 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:30:24.143652+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: button-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          show_icon: false
+          show_state: false
+          show_name: false
+          custom_fields:
+            value: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+              ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+              | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+              | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+              | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+              | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+              states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+              else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+              | float(0)) | round(1) }}g{% endif %}'
+          styles:
+            card:
+            - background: transparent
+            - box-shadow: none
+            - border: none
+            - padding: 0 2px
+            - text-align: left
+            - justify-content: flex-start
+            - align-items: flex-start
+            custom_fields:
+              value:
+              - text-align: left
+              - font-size: 11px
+              - line-height: '1.1'
+              - padding: '0'
+              - margin: '0'
+              - justify-content: flex-start
+              - display: flex
+          tap_action:
+            action: none
+        - type: button-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          show_icon: false
+          show_state: false
+          show_name: false
+          custom_fields:
+            value: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+              ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+              | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+              | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+              | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+              | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+              states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+              else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+              | float(0)) | round(1) }}g{% endif %}'
+          styles:
+            card:
+            - background: transparent
+            - box-shadow: none
+            - border: none
+            - padding: 0 2px
+            - text-align: left
+            - justify-content: flex-start
+            - align-items: flex-start
+            custom_fields:
+              value:
+              - text-align: left
+              - font-size: 11px
+              - line-height: '1.1'
+              - padding: '0'
+              - margin: '0'
+              - justify-content: flex-start
+              - display: flex
+          tap_action:
+            action: none
+        - type: button-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          show_icon: false
+          show_state: false
+          show_name: false
+          custom_fields:
+            value: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+              ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+              | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+              | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+              | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+              | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+              states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+              else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+              | float(0)) | round(1) }}g{% endif %}'
+          styles:
+            card:
+            - background: transparent
+            - box-shadow: none
+            - border: none
+            - padding: 0 2px
+            - text-align: left
+            - justify-content: flex-start
+            - align-items: flex-start
+            custom_fields:
+              value:
+              - text-align: left
+              - font-size: 11px
+              - line-height: '1.1'
+              - padding: '0'
+              - margin: '0'
+              - justify-content: flex-start
+              - display: flex
+          tap_action:
+            action: none
+        - type: button-card
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          show_icon: false
+          show_state: false
+          show_name: false
+          custom_fields:
+            value: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+              ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+              | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+              | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+              | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+              | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+              states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+              else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+              | float(0)) | round(1) }}g{% endif %}'
+          styles:
+            card:
+            - background: transparent
+            - box-shadow: none
+            - border: none
+            - padding: 0 2px
+            - text-align: left
+            - justify-content: flex-start
+            - align-items: flex-start
+            custom_fields:
+              value:
+              - text-align: left
+              - font-size: 11px
+              - line-height: '1.1'
+              - padding: '0'
+              - margin: '0'
+              - justify-content: flex-start
+              - display: flex
+          tap_action:
+            action: none
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261016_203205.yaml

@@ -0,0 +1,533 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-16T20:32:05.728987+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: tile
+          entity: sensor.sparkx_i7_cfs_box_1_slot_1_color
+          name: ''
+          icon: none
+          state_content:
+          - state
+          grid_options:
+            columns: 3
+          tap_action:
+            action: none
+          card_mod:
+            style: 'ha-card { padding: 0 4px; margin: 0; } .tile { padding: 0; } .tile__title
+              { display: none; } .tile__state { text-align: left; justify-content:
+              flex-start; font-size: 10px; line-height: 1; margin: 0; padding: 0;
+              } .tile__icon { display: none; }'
+          state_display: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+        - type: tile
+          entity: sensor.sparkx_i7_cfs_box_1_slot_2_color
+          name: ''
+          icon: none
+          state_content:
+          - state
+          grid_options:
+            columns: 3
+          tap_action:
+            action: none
+          card_mod:
+            style: 'ha-card { padding: 0 4px; margin: 0; } .tile { padding: 0; } .tile__title
+              { display: none; } .tile__state { text-align: left; justify-content:
+              flex-start; font-size: 10px; line-height: 1; margin: 0; padding: 0;
+              } .tile__icon { display: none; }'
+          state_display: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+        - type: tile
+          entity: sensor.sparkx_i7_cfs_box_1_slot_3_color
+          name: ''
+          icon: none
+          state_content:
+          - state
+          grid_options:
+            columns: 3
+          tap_action:
+            action: none
+          card_mod:
+            style: 'ha-card { padding: 0 4px; margin: 0; } .tile { padding: 0; } .tile__title
+              { display: none; } .tile__state { text-align: left; justify-content:
+              flex-start; font-size: 10px; line-height: 1; margin: 0; padding: 0;
+              } .tile__icon { display: none; }'
+          state_display: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+        - type: tile
+          entity: sensor.sparkx_i7_cfs_box_1_slot_4_color
+          name: ''
+          icon: none
+          state_content:
+          - state
+          grid_options:
+            columns: 3
+          tap_action:
+            action: none
+          card_mod:
+            style: 'ha-card { padding: 0 4px; margin: 0; } .tile { padding: 0; } .tile__title
+              { display: none; } .tile__state { text-align: left; justify-content:
+              flex-start; font-size: 10px; line-height: 1; margin: 0; padding: 0;
+              } .tile__icon { display: none; }'
+          state_display: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - heading: Temperature
+        heading_style: title
+        icon: mdi:coolant-temperature
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261018_060039.yaml

@@ -0,0 +1,493 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-18T06:00:39.967779+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)') %}\n  {% if\
+            \ sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.label = 'Slot ' ~ n ~\
+            \ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n    {% set v.html\
+            \ = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label\
+            \ = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014 empty</span>\" %}\n\
+            \  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\"\
+            ,\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ v.html ~ \"<div class='slot-label'>\" ~ v.label\
+            \ ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n \
+            \       {\"background\": \"transparent\"},\n        {\"box-shadow\": \"\
+            none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px\
+            \ 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .warn-low .tube-bg {\n        background-color: #fff6df;\n\
+            \        outline: 2px solid var(--warning-color);\n      }\n      .warn-low\
+            \ .slot-label {\n        color: var(--warning-color);\n      }\n     \
+            \ .warn-crit .tube-bg {\n        background-color: #fdecea;\n        outline:\
+            \ 2px solid var(--error-color);\n      }\n      .warn-crit .slot-label\
+            \ {\n        color: var(--error-color);\n      }\n    \",\n    \"tap_action\"\
+            : {\n      \"action\": \"more-info\" if sp.ent != '' else \"none\"\n \
+            \   }\n  } %}\n\n  {% set ns.cards = ns.cards + [card] %}\n{% endfor %}\n\
+            {{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.3d-printer-cellphone.20261018_060451.yaml

@@ -0,0 +1,499 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: 3d-printer-cellphone
+captured: '2026-10-18T06:04:51.942731+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - sections:
+    - cards:
+      - card:
+          columns: 4
+          square: false
+          type: grid
+        card_param: cards
+        filter:
+          template: "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1]\
+            \ | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing',\
+            \ 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='')\
+            \ %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_')\
+            \ %}\n      {% set loc = (s.attributes.location | default('')) | lower\
+            \ %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent =\
+            \ s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n\
+            \  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent',\
+            \ wrap='', text='#111111', halo='rgba(255,255,255,0.95)', vendor='') %}\n\
+            \  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex')\
+            \ | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#')\
+            \ else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight')\
+            \ | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total\
+            \ = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set\
+            \ raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n\
+            \    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct)\
+            \ %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3]\
+            \ | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb =\
+            \ hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg\
+            \ + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170)\
+            \ else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff'\
+            \ else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0\
+            \ and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n\
+            \    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band\
+            \ == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n)\
+            \ else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower\
+            \ in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"\
+            <div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~\
+            \ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\"\
+            \ ~ remain ~ \"g</div></div>\" %}\n    {% set v.vendor = (state_attr(sp.ent,\
+            \ 'filament_vendor_name') | default('') | string | trim) %}{% set v.label\
+            \ = 'Slot ' ~ n ~ (' \u26A0' if band > 0 else '') %}\n  {% else %}\n \
+            \   {% set v.html = \"<div class='tube-bg tube-empty'></div>\" %}\n  \
+            \  {% set v.label = \"<span class='slot-warn'>Slot \" ~ n ~ \" \u2014\
+            \ empty</span>\" %}\n  {% endif %}\n  {% set card = {\n    \"type\": \"\
+            custom:button-card\",\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n\
+            \    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\"\
+            : false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\"\
+            \ ~ v.wrap ~ \"'>\" ~ ((\"<div class='slot-vendor'>\" ~ v.vendor ~ \"\
+            </div>\") if v.vendor else '') ~ v.html ~ \"<div class='slot-label'>\"\
+            \ ~ v.label ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\"\
+            : [\n        {\"background\": \"transparent\"},\n        {\"box-shadow\"\
+            : \"none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"\
+            8px 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\"\
+            : \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n    \
+            \  \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"\
+            100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\"\
+            : \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n \
+            \     }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg\
+            \ { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active\
+            \ .slot-label { color: var(--primary-color); font-weight: 800; }     \
+            \ .tube-wrap {\n        display: flex;\n        flex-direction: column;\n\
+            \        align-items: center;\n        width: 100%;\n      }\n      .tube-bg\
+            \ {\n        position: relative;\n        width: 60px;\n        height:\
+            \ 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n\
+            \        overflow: hidden;\n        border: 1px solid \" ~ v.border ~\
+            \ \";\n        display: flex;\n        flex-direction: column;\n     \
+            \   justify-content: flex-end;\n      }\n      .tube-empty {\n       \
+            \ background: transparent;\n        border: 2px dashed var(--error-color);\n\
+            \      }\n      .tube-fill {\n        width: 100%;\n        border-radius:\
+            \ 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n\
+            \        top: 48%;\n        left: 50%;\n        transform: translate(-50%,\
+            \ -50%);\n        font-size: 13px;\n        font-weight: 800;\n      \
+            \  color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~\
+            \ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n     \
+            \   z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label\
+            \ {\n        margin-top: 8px;\n        font-size: 12px;\n        font-weight:\
+            \ 700;\n        letter-spacing: 0.3px;\n        color: var(--secondary-text-color);\n\
+            \      }\n      .slot-warn {\n        color: var(--error-color);\n   \
+            \   }\n      .slot-vendor {\n        margin-bottom: 2px;\n        font-size:\
+            \ 9px;\n        font-weight: 700;\n        letter-spacing: 0.2px;\n  \
+            \      text-transform: uppercase;\n        color: var(--secondary-text-color);\n\
+            \        max-width: 70px;\n        overflow: hidden;\n        text-overflow:\
+            \ ellipsis;\n        white-space: nowrap;\n      }\n      .warn-low .tube-bg\
+            \ {\n        background-color: #fff6df;\n        outline: 2px solid var(--warning-color);\n\
+            \      }\n      .warn-low .slot-label {\n        color: var(--warning-color);\n\
+            \      }\n      .warn-crit .tube-bg {\n        background-color: #fdecea;\n\
+            \        outline: 2px solid var(--error-color);\n      }\n      .warn-crit\
+            \ .slot-label {\n        color: var(--error-color);\n      }\n    \",\n\
+            \    \"tap_action\": {\n      \"action\": \"more-info\" if sp.ent != ''\
+            \ else \"none\"\n    }\n  } %}\n\n  {% set ns.cards = ns.cards + [card]\
+            \ %}\n{% endfor %}\n{{ ns.cards }}\n"
+        type: custom:auto-entities
+      - type: horizontal-stack
+        grid_options:
+          columns: full
+        cards:
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_1''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_1_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_2''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_2_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_3''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_3_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+        - type: markdown
+          content: '{% if states(''sensor.sparkx_i7_print_status'') in [''printing'',
+            ''paused''] %}{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+            | float(0.0298) %}{% set cur = states(''sensor.sparkx_i7_used_material_length'')
+            | float(0) %}{% set ck = states(''input_number.sparkx_i7_spoolman_length_checkpoint'')
+            | float(0) %}{% set booked = states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if
+            states(''sensor.sparkx_i7_active_filament_slot'') == ''box_1_slot_4''
+            else 0) %}{{ live | round(1) }}g{% else %}{{ (states(''input_number.sparkx_i7_slot_4_grams'')
+            | float(0)) | round(1) }}g{% endif %}'
+          card_mod:
+            style: 'ha-card { background: transparent; box-shadow: none; border: none;
+              padding: 0 4px; margin: 0; text-align: left; } .markdown { padding:
+              0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align:
+              left; font-size: 11px; line-height: 1; }'
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: full
+          icon: mdi:magnet
+          icon_color: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% set c = states(''sensor.sparkx_i7_cfs_'' ~ (slot | lower | replace(''
+            '', ''_'')) ~ ''_color'') | replace(''#'', '''') | lower %}{% if c | length
+            == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}'
+          multiline_secondary: true
+          name: Next Deduction Match
+          primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_'\
+            \ ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce)\
+            \ | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1)\
+            \ %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex')\
+            \ and (state_attr(e[:-10], 'location') | default('', true) | lower) ==\
+            \ ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10]\
+            \ ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif\
+            \ %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No\
+            \ slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{\
+            \ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} \u2192 spool {{\
+            \ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper\
+            \ }} \u2192 spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id\
+            \ ~ '_filament_name') }} \xB7 {{ ns.rem | round(1) }} g left)\n{% endif\
+            \ %}\n"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - heading: Last/Current Print Job
+        heading_style: title
+        icon: mdi:printer-3d
+        type: heading
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+          rows: 1
+        icon: mdi:plus-minus
+        name: Used Material Total
+        type: tile
+      - entity: sensor.sparkx_moonraker_print_eta
+        features_position: bottom
+        grid_options:
+          columns: 6
+          rows: 1
+        name: Print ETA
+        type: tile
+        vertical: false
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in\
+          \ ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n\
+          {% endif %}"
+        icon_color: "{% set st = states('sensor.sparkx_i7_print_status') %} {% if\
+          \ st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif\
+          \ %}"
+        multiline_secondary: true
+        primary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w\
+          \ = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in\
+          \ ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1)\
+          \ }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight')\
+          \ | float(0) | round(1) }} g\n{% endif %}\n"
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set\
+          \ c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing',\
+          \ 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){%\
+          \ else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost')\
+          \ | float(0) | round(2) }} $ (last job)\n{% endif %}\n"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_expected_material_length
+        grid_options:
+          columns: 6
+          rows: auto
+        icon: mdi:scale-balance
+        icon_color: '{% set gcm = states(''input_number.sparkx_i7_filament_g_cm'')
+          | float(0.0298) %}
+
+          {% set lencm = states(''sensor.sparkx_i7_expected_material_length'') | float(0)
+          %}
+
+          {% set wgt = states(''sensor.sparkx_i7_expected_material_weight'') | float(0)
+          %}
+
+          {% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}
+
+          {% set used_g = ((states(''sensor.sparkx_i7_used_material_length'') | float(0))
+          * gcm) | round(1) %}
+
+          {% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}
+
+          {% set gc = namespace(list=[]) %}
+
+          {% for p in (state_attr(''sensor.sparkx_i7_expected_material_length'',''color'')
+          | default('''', true) | string).split('';'') %}
+
+          {% set q = p | replace(''#'','''') | lower | trim %}
+
+          {% if q not in ['''',''none'',''unknown'',''unavailable''] %}{% set gc.list
+          = gc.list + [q] %}{% endif %}
+
+          {% endfor %}
+
+          {% set single = (gc.list | length) == 1 %}
+
+          {% set aslot = (states(''sensor.sparkx_i7_active_filament_slot'') | default('''',
+          true) | string).split(''_'')[-1] %}
+
+          {% set aslot = aslot if aslot in [''1'',''2'',''3'',''4''] else '''' %}
+
+          {% set s = namespace(short=false, ok=false, matched=0, active=false) %}
+
+          {% for n in [''1'',''2'',''3'',''4''] %}
+
+          {% set sp = namespace(id='''', rem=-1) %}
+
+          {% for e in integration_entities(''spoolman'') if e.endswith(''_color_hex'')
+          %}
+
+          {% if sp.id == '''' and (state_attr(e[:-10],''location'') | default('''',
+          true) | lower) == (''cfs lite '' ~ n) %}
+
+          {% set sp.id = e[:-10] %}
+
+          {% set sp.rem = states(e[:-10]) | float(-1) %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% if sp.id != '''' and sp.rem >= 0 %}
+
+          {% set s.matched = s.matched + 1 %}
+
+          {% if single %}
+
+          {% if n == aslot %}
+
+          {% set s.active = true %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% else %}
+
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true
+          %}{% endif %}
+
+          {% endif %}
+
+          {% endif %}
+
+          {% endfor %}
+
+          {% set active = (states(''sensor.sparkx_i7_print_status'') | default('''',
+          true)) in [''printing'',''paused''] %}
+
+          {% set v = namespace(state=''unknown'', label=''check unavailable'') %}
+
+          {% if not active %}
+
+          {% set v.state = ''idle'' %}
+
+          {% set v.label = ''no active print'' %}
+
+          {% elif job_g <= 0 %}
+
+          {% set v.state = ''none'' %}
+
+          {% set v.label = ''no slicer estimate yet'' %}
+
+          {% elif s.short %}
+
+          {% set v.state = ''short'' %}
+
+          {% set v.label = ''NOT ENOUGH'' %}
+
+          {% elif s.ok %}
+
+          {% set v.state = ''ok'' %}
+
+          {% set v.label = ''enough'' %}
+
+          {% elif single and aslot == '''' %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no active CFS slot'' %}
+
+          {% elif single and not s.active %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''active slot has no spool'' %}
+
+          {% elif s.matched == 0 %}
+
+          {% set v.state = ''unknown'' %}
+
+          {% set v.label = ''no spool loaded'' %}
+
+          {% endif %}
+
+          {% if v.state == ''ok'' %}green{% elif v.state == ''short'' %}red{% elif
+          v.state in [''none'',''idle''] %}grey{% else %}orange{% endif %}'
+        multiline_secondary: true
+        name: Filament Sufficiency
+        primary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298)\
+          \ %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}no active print{% else %}{{ job_g }} g needed \xB7 {{ used_g }} g used{%\
+          \ endif %}"
+        secondary: "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') |\
+          \ float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length')\
+          \ | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight')\
+          \ | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1))\
+          \ %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length')\
+          \ | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0]\
+          \ | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color')\
+          \ | default('', true) | string).split(';') %}\n{% set q = p | replace('#','')\
+          \ | lower | trim %}\n{% if q not in ['','none','unknown','unavailable']\
+          \ %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single\
+          \ = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot')\
+          \ | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot\
+          \ if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false,\
+          \ ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n\
+          {% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman')\
+          \ if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location')\
+          \ | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10]\
+          \ %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor\
+          \ %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched\
+          \ + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n\
+          {% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true\
+          \ %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set\
+          \ s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif\
+          \ %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status')\
+          \ | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown',\
+          \ label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle'\
+          \ %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set\
+          \ v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{%\
+          \ elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH'\
+          \ %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough'\
+          \ %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active\
+          \ %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no\
+          \ spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n\
+          {% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle'\
+          \ %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print\
+          \ \xB7 {{ v.label }}{% endif %}"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 4
+        max: 40
+        min: 0
+        name: Flow
+        severity:
+          green: 0
+          red: 24
+          yellow: 12
+        type: gauge
+      type: grid
+    type: sections

.ha_mcp/backups/dashboard.printer-stats.20261010_061830.yaml

@@ -0,0 +1,787 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: printer-stats
+captured: '2026-10-10T06:18:30.555566+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - title: Print
+    path: print
+    type: sections
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+      - type: custom:webrtc-camera
+        url: octoprint
+        ui: true
+      - type: custom:webrtc-camera
+        url: octoprint2
+        ui: true
+      - type: tile
+        entity: binary_sensor.octoprint_printing
+        name: Printing
+        icon: mdi:printer-3d
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: binary_sensor.octoprint_connected
+        name: Connected
+        icon: mdi:lan-connect
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_print_status
+        name: Status
+        icon: mdi:state-machine
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_last_event
+        name: Last Event
+        icon: mdi:history
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: binary_sensor.octoprint_paused
+        name: Paused
+        icon: mdi:pause
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_current_z
+        name: Current Z
+        icon: mdi:axis-z-arrow
+        grid_options:
+          columns: 6
+      - type: markdown
+        content: '**File:** {{ states(''sensor.octoprint_print_file'') }}
+
+          **Size:** {{ (states(''sensor.octoprint_print_file_size'') | int(0) / 1048576)
+          | round(2) }} MB
+
+          **User:** {{ states(''sensor.octoprint_print_user'') }}'
+        grid_options:
+          columns: full
+      - type: tile
+        entity: sensor.octoprint_print_file
+        name: File
+        icon: mdi:file-code
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print Progress
+        icon: mdi:progress-clock
+      - type: gauge
+        entity: sensor.octoprint_print_progress_live
+        name: Progress
+        min: 0
+        max: 100
+        unit: '%'
+        severity:
+          green: 0
+          yellow: 40
+          red: 90
+        grid_options:
+          columns: 6
+          rows: 3
+      - type: custom:mushroom-template-card
+        primary: Elapsed
+        name: Elapsed
+        icon: mdi:clock-start
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set s = states(''sensor.octoprint_elapsed'') | float(0) %}{%
+          set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{% if h
+          %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+      - type: custom:mushroom-template-card
+        primary: Remaining
+        name: Remaining
+        icon: mdi:clock-end
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set s = states(''sensor.octoprint_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+      - type: custom:mushroom-template-card
+        primary: Est. Finish
+        secondary: "{% set finish = states('sensor.octoprint_approximate_completion_time')\
+          \ | as_datetime %}{% if finish %}{{ (as_local(finish)).strftime('%I:%M %p').lstrip('0')\
+          \ }}{% else %}\u2014{% endif %}"
+        multiline_secondary: true
+        icon: mdi:clock-outline
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        primary: Layer
+        name: Layer
+        icon: mdi:layers
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set c = states(''sensor.octoprint_layer_progress'') | int(0)
+          %}{% set t = state_attr(''sensor.octoprint_layer_progress'', ''total'')
+          | int(0) %}{{ c }} of {{ t }}'
+      - type: custom:mushroom-template-card
+        primary: Height
+        name: Height
+        icon: mdi:axis-z-arrow
+        grid_options:
+          columns: 6
+        secondary: '{% set c = states(''sensor.octoprint_height_progress_clean'')
+          | float(0) %}{% set t = state_attr(''sensor.octoprint_height_progress_clean'',
+          ''total'') | float(0) %}{{ c }} of {{ t }} mm'
+        multiline_secondary: true
+      - type: tile
+        entity: light.3d_printer_lights_local
+        name: Printer Light
+        icon: mdi:lightbulb
+        grid_options:
+          columns: 6
+      - type: sensor
+        entity: sensor.octoprint_print_progress_live
+        name: Progress History
+        graph: line
+        hours_to_show: 24
+        detail: 1
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Temperatures
+        icon: mdi:thermometer
+      - type: gauge
+        entity: sensor.octoprint_tool_0_temperature
+        name: Nozzle
+        min: 0
+        max: 260
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 180
+          red: 240
+        grid_options:
+          columns: 4
+      - type: gauge
+        entity: sensor.octoprint_bed_temperature
+        name: Bed
+        min: 0
+        max: 120
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 60
+          red: 100
+        grid_options:
+          columns: 4
+      - type: gauge
+        entity: sensor.octoprint_soc_temperature
+        name: SoC
+        min: 0
+        max: 100
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 70
+          red: 90
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_tool_0_target
+        name: Nozzle Target
+        icon: mdi:printer-3d-nozzle
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_bed_target
+        name: Bed Target
+        icon: mdi:radiator
+        grid_options:
+          columns: 6
+      - title: Nozzle Temperature
+        type: history-graph
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Actual
+          color: '#ef5350'
+        - entity: sensor.octoprint_tool_0_target
+          name: Target
+          color: '#4caf50'
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        grid_options:
+          columns: full
+      - title: Bed Temperature
+        type: history-graph
+        entities:
+        - entity: sensor.octoprint_bed_temperature
+          name: Actual
+          color: '#42a5f5'
+        - entity: sensor.octoprint_bed_target
+          name: Target
+          color: '#4caf50'
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Controls
+        icon: mdi:gesture-tap-button
+      - type: tile
+        entity: switch.octoprint_pause_print
+        name: Pause
+        icon: mdi:pause
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: switch.octoprint_connect_to_printer
+        name: Connect
+        icon: mdi:lan-connect
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: switch.octoprint_camera_snapshot
+        name: Snapshot
+        icon: mdi:camera
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: button.octoprint_cancel_print
+        name: Cancel Print
+        icon: mdi:cancel
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.octoprint_cancel_print
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: button.octoprint_emergency_stop
+        name: Emergency Stop
+        icon: mdi:stop-circle
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.octoprint_emergency_stop
+        grid_options:
+          columns: 6
+      - type: button
+        name: GCode Viewer
+        icon: mdi:cube-outline
+        tap_action:
+          action: url
+          url_path: https://ender5pro.duckdns.org/#gcode
+        grid_options:
+          columns: 6
+      - type: button
+        name: Pretty GCode Viewer
+        icon: mdi:cube-outline
+        tap_action:
+          action: url
+          url_path: https://ender5pro.duckdns.org/#tab_plugin_prettygcode
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Totals
+        icon: mdi:chart-box-outline
+      - type: tile
+        entity: sensor.octoprint_printer_print_time_today
+        name: Print Time Today
+        icon: mdi:clock-start
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_print_time_this_week
+        name: Print Time This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        grid_options:
+          columns: 4
+        entity: sensor.octoprint_printer_print_time_last_7_days
+        name: Print Time Last 7 Days
+        icon: mdi:history
+        vertical: false
+        features_position: bottom
+      - type: tile
+        entity: sensor.octoprint_printer_prints_today
+        name: Prints Today
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_prints_this_week
+        name: Prints This Week
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_prints_last_7_days
+        name: Prints Last 7 Days
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+    - type: grid
+      cards:
+      - type: heading
+        heading: Filament Usage
+        icon: mdi:chart-donut
+      - type: tile
+        entity: sensor.octoprint_last_print_filament
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_daily
+        name: Filament Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weekly
+        name: Filament This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_monthly
+        name: Filament This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_used_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+      - type: heading
+        heading: Grams Usage
+        icon: mdi:weight
+      - type: tile
+        entity: sensor.octoprint_last_print_filament_weight
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_daily
+        name: Filament Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_weekly
+        name: Filament This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_monthly
+        name: Filament This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_used_weight_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+      - type: heading
+        heading: Cost Usage
+        icon: mdi:cash-multiple
+      - type: tile
+        entity: sensor.octoprint_filament_cost_last_job
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_daily
+        name: Cost Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_weekly
+        name: Cost This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_monthly
+        name: Cost This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+  - title: History
+    path: history
+    type: sections
+    max_columns: 2
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: Temperature History
+        icon: mdi:chart-line-variant
+      - type: history-graph
+        title: Temperatures (24h)
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Nozzle
+          color: '#ef5350'
+        - entity: sensor.octoprint_tool_0_target
+          name: Nozzle Target
+          color: '#ffab91'
+        - entity: sensor.octoprint_bed_temperature
+          name: Bed
+          color: '#42a5f5'
+        - entity: sensor.octoprint_bed_target
+          name: Bed Target
+          color: '#90caf9'
+        grid_options:
+          columns: full
+      - type: history-graph
+        title: Temperatures (7 days)
+        hours_to_show: 168
+        show_names: true
+        expand_legend: true
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Nozzle
+          color: '#ef5350'
+        - entity: sensor.octoprint_bed_temperature
+          name: Bed
+          color: '#42a5f5'
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print Activity
+        icon: mdi:chart-box-outline
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Z Position (24h)
+          show_states: true
+          colorize_states: true
+        graph_span: 24h
+        series:
+        - entity: sensor.octoprint_current_z
+          name: Current Z
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          fill_raw: last
+        grid_options:
+          columns: full
+        apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+      - type: history-graph
+        title: Print Progress (24h)
+        hours_to_show: 24
+        show_names: true
+        entities:
+        - entity: sensor.octoprint_print_progress_live
+          name: Progress
+          color: '#66bb6a'
+        grid_options:
+          columns: full
+      - type: history-graph
+        title: Print Duration (24h)
+        hours_to_show: 24
+        show_names: true
+        entities:
+        - entity: sensor.octoprint_elapsed
+          name: Elapsed
+          color: '#26c6da'
+        - entity: sensor.octoprint_time_left
+          name: Remaining
+          color: '#ffa726'
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print History
+        icon: mdi:history
+      - type: markdown
+        content: '**Successful:** {{ states(''sensor.octoprint_successful_prints_count'')
+          }} | **Failed:** {{ states(''sensor.octoprint_failed_prints_count'') }}'
+      - type: history-graph
+        title: Printing State (7 days)
+        hours_to_show: 168
+        show_names: true
+        entities:
+        - entity: binary_sensor.octoprint_printing
+          name: Printing
+          color: '#66bb6a'
+        grid_options:
+          columns: full
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Print Outcomes (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            stacked: true
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: true
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+          legend:
+            show: true
+        series:
+        - entity: sensor.octoprint_successful_prints_count
+          name: Successful
+          color: '#66bb6a'
+          type: column
+          group_by:
+            func: diff
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_failed_prints_count
+          name: Failed
+          color: '#ef5350'
+          type: column
+          group_by:
+            func: diff
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: markdown
+        title: Recent Prints
+        content: "{% for j in (state_attr('sensor.octoprint_recent_prints', 'allPrintJobs')\
+          \ | default([]))[:5] %}\n{% set d = j.get('duration', 0) | int %}\n- **{{\
+          \ j.fileName }}** \u2014 {{ j.printStatusResult | title }}, {{ (d / 3600)\
+          \ | int }}h {{ ((d % 3600) / 60) | int }}m, {{ j.get('filamentModels', {}).get('total',\
+          \ {}).get('usedLength', 0) | round(0) }}mm\n{% endfor %}"
+    - type: grid
+      cards:
+      - type: heading
+        heading: Filament Usage
+        icon: mdi:spool
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_daily
+          name: Used (mm)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_used_total
+          name: Total (mm)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_weekly
+          name: Weekly (mm)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage - Grams (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_weight_daily
+          name: Used (g)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_used_weight_total
+          name: Total (g)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_weight_weekly
+          name: Weekly (g)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage - Cost (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_cost_daily
+          name: Used ($)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_cost_weekly
+          name: Weekly ($)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_cost_total
+          name: Total ($)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+    - type: grid
+      cards:
+      - type: heading
+        heading: OctoPrint Host
+        icon: mdi:server
+      - type: tile
+        entity: sensor.octoprint_disk_usage
+        icon: mdi:harddisk
+      - type: tile
+        entity: sensor.octoprint_cpu_usage
+        icon: mdi:cpu-64-bit
+      - type: tile
+        entity: sensor.octoprint_memory_usage
+        icon: mdi:memory
+      - type: tile
+        entity: sensor.octoprint_core_0_temperature
+        icon: mdi:thermometer
+      - type: tile
+        entity: sensor.octoprint_uptime
+        icon: mdi:clock-outline
+  - type: sections
+    max_columns: 4
+    title: Test
+    path: test
+    sections:
+    - type: grid
+      cards: []

.ha_mcp/backups/dashboard.printer-stats.20261010_070252.yaml

@@ -0,0 +1,969 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: printer-stats
+captured: '2026-10-10T07:02:52.536646+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - title: Print
+    path: print
+    type: sections
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+      - type: custom:webrtc-camera
+        url: octoprint
+        ui: true
+      - type: custom:webrtc-camera
+        url: octoprint2
+        ui: true
+      - type: tile
+        entity: binary_sensor.octoprint_printing
+        name: Printing
+        icon: mdi:printer-3d
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: binary_sensor.octoprint_connected
+        name: Connected
+        icon: mdi:lan-connect
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_print_status
+        name: Status
+        icon: mdi:state-machine
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_last_event
+        name: Last Event
+        icon: mdi:history
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: binary_sensor.octoprint_paused
+        name: Paused
+        icon: mdi:pause
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_current_z
+        name: Current Z
+        icon: mdi:axis-z-arrow
+        grid_options:
+          columns: 6
+      - type: markdown
+        content: '**File:** {{ states(''sensor.octoprint_print_file'') }}
+
+          **Size:** {{ (states(''sensor.octoprint_print_file_size'') | int(0) / 1048576)
+          | round(2) }} MB
+
+          **User:** {{ states(''sensor.octoprint_print_user'') }}'
+        grid_options:
+          columns: full
+      - type: tile
+        entity: sensor.octoprint_print_file
+        name: File
+        icon: mdi:file-code
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print Progress
+        icon: mdi:progress-clock
+      - type: gauge
+        entity: sensor.octoprint_print_progress_live
+        name: Progress
+        min: 0
+        max: 100
+        unit: '%'
+        severity:
+          green: 0
+          yellow: 40
+          red: 90
+        grid_options:
+          columns: 6
+          rows: 3
+      - type: custom:mushroom-template-card
+        primary: Elapsed
+        name: Elapsed
+        icon: mdi:clock-start
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set s = states(''sensor.octoprint_elapsed'') | float(0) %}{%
+          set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{% if h
+          %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+      - type: custom:mushroom-template-card
+        primary: Remaining
+        name: Remaining
+        icon: mdi:clock-end
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set s = states(''sensor.octoprint_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+      - type: custom:mushroom-template-card
+        primary: Est. Finish
+        secondary: "{% set finish = states('sensor.octoprint_approximate_completion_time')\
+          \ | as_datetime %}{% if finish %}{{ (as_local(finish)).strftime('%I:%M %p').lstrip('0')\
+          \ }}{% else %}\u2014{% endif %}"
+        multiline_secondary: true
+        icon: mdi:clock-outline
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        primary: Layer
+        name: Layer
+        icon: mdi:layers
+        grid_options:
+          columns: 6
+        multiline_secondary: true
+        secondary: '{% set c = states(''sensor.octoprint_layer_progress'') | int(0)
+          %}{% set t = state_attr(''sensor.octoprint_layer_progress'', ''total'')
+          | int(0) %}{{ c }} of {{ t }}'
+      - type: custom:mushroom-template-card
+        primary: Height
+        name: Height
+        icon: mdi:axis-z-arrow
+        grid_options:
+          columns: 6
+        secondary: '{% set c = states(''sensor.octoprint_height_progress_clean'')
+          | float(0) %}{% set t = state_attr(''sensor.octoprint_height_progress_clean'',
+          ''total'') | float(0) %}{{ c }} of {{ t }} mm'
+        multiline_secondary: true
+      - type: tile
+        entity: light.3d_printer_lights_local
+        name: Printer Light
+        icon: mdi:lightbulb
+        grid_options:
+          columns: 6
+      - type: sensor
+        entity: sensor.octoprint_print_progress_live
+        name: Progress History
+        graph: line
+        hours_to_show: 24
+        detail: 1
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Temperatures
+        icon: mdi:thermometer
+      - type: gauge
+        entity: sensor.octoprint_tool_0_temperature
+        name: Nozzle
+        min: 0
+        max: 260
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 180
+          red: 240
+        grid_options:
+          columns: 4
+      - type: gauge
+        entity: sensor.octoprint_bed_temperature
+        name: Bed
+        min: 0
+        max: 120
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 60
+          red: 100
+        grid_options:
+          columns: 4
+      - type: gauge
+        entity: sensor.octoprint_soc_temperature
+        name: SoC
+        min: 0
+        max: 100
+        unit: "\xB0C"
+        severity:
+          green: 0
+          yellow: 70
+          red: 90
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_tool_0_target
+        name: Nozzle Target
+        icon: mdi:printer-3d-nozzle
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.octoprint_bed_target
+        name: Bed Target
+        icon: mdi:radiator
+        grid_options:
+          columns: 6
+      - title: Nozzle Temperature
+        type: history-graph
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Actual
+          color: '#ef5350'
+        - entity: sensor.octoprint_tool_0_target
+          name: Target
+          color: '#4caf50'
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        grid_options:
+          columns: full
+      - title: Bed Temperature
+        type: history-graph
+        entities:
+        - entity: sensor.octoprint_bed_temperature
+          name: Actual
+          color: '#42a5f5'
+        - entity: sensor.octoprint_bed_target
+          name: Target
+          color: '#4caf50'
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Controls
+        icon: mdi:gesture-tap-button
+      - type: tile
+        entity: switch.octoprint_pause_print
+        name: Pause
+        icon: mdi:pause
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: switch.octoprint_connect_to_printer
+        name: Connect
+        icon: mdi:lan-connect
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: switch.octoprint_camera_snapshot
+        name: Snapshot
+        icon: mdi:camera
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: button.octoprint_cancel_print
+        name: Cancel Print
+        icon: mdi:cancel
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.octoprint_cancel_print
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: button.octoprint_emergency_stop
+        name: Emergency Stop
+        icon: mdi:stop-circle
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.octoprint_emergency_stop
+        grid_options:
+          columns: 6
+      - type: button
+        name: GCode Viewer
+        icon: mdi:cube-outline
+        tap_action:
+          action: url
+          url_path: https://ender5pro.duckdns.org/#gcode
+        grid_options:
+          columns: 6
+      - type: button
+        name: Pretty GCode Viewer
+        icon: mdi:cube-outline
+        tap_action:
+          action: url
+          url_path: https://ender5pro.duckdns.org/#tab_plugin_prettygcode
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Totals
+        icon: mdi:chart-box-outline
+      - type: tile
+        entity: sensor.octoprint_printer_print_time_today
+        name: Print Time Today
+        icon: mdi:clock-start
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_print_time_this_week
+        name: Print Time This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        grid_options:
+          columns: 4
+        entity: sensor.octoprint_printer_print_time_last_7_days
+        name: Print Time Last 7 Days
+        icon: mdi:history
+        vertical: false
+        features_position: bottom
+      - type: tile
+        entity: sensor.octoprint_printer_prints_today
+        name: Prints Today
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_prints_this_week
+        name: Prints This Week
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_printer_prints_last_7_days
+        name: Prints Last 7 Days
+        icon: mdi:counter
+        grid_options:
+          columns: 4
+    - type: grid
+      cards:
+      - type: heading
+        heading: Filament Usage
+        icon: mdi:chart-donut
+      - type: tile
+        entity: sensor.octoprint_last_print_filament
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_daily
+        name: Filament Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weekly
+        name: Filament This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_monthly
+        name: Filament This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_used_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+      - type: heading
+        heading: Grams Usage
+        icon: mdi:weight
+      - type: tile
+        entity: sensor.octoprint_last_print_filament_weight
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_daily
+        name: Filament Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_weekly
+        name: Filament This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_weight_monthly
+        name: Filament This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_used_weight_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+      - type: heading
+        heading: Cost Usage
+        icon: mdi:cash-multiple
+      - type: tile
+        entity: sensor.octoprint_filament_cost_last_job
+        name: Last Job
+        icon: mdi:history
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_daily
+        name: Cost Today
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_weekly
+        name: Cost This Week
+        icon: mdi:calendar-week
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_monthly
+        name: Cost This Month
+        icon: mdi:calendar-month
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.octoprint_filament_cost_total
+        name: Grand Total
+        icon: mdi:chart-pie
+        grid_options:
+          columns: 4
+  - title: History
+    path: history
+    type: sections
+    max_columns: 2
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: Temperature History
+        icon: mdi:chart-line-variant
+      - type: history-graph
+        title: Temperatures (24h)
+        hours_to_show: 24
+        show_names: true
+        expand_legend: true
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Nozzle
+          color: '#ef5350'
+        - entity: sensor.octoprint_tool_0_target
+          name: Nozzle Target
+          color: '#ffab91'
+        - entity: sensor.octoprint_bed_temperature
+          name: Bed
+          color: '#42a5f5'
+        - entity: sensor.octoprint_bed_target
+          name: Bed Target
+          color: '#90caf9'
+        grid_options:
+          columns: full
+      - type: history-graph
+        title: Temperatures (7 days)
+        hours_to_show: 168
+        show_names: true
+        expand_legend: true
+        entities:
+        - entity: sensor.octoprint_tool_0_temperature
+          name: Nozzle
+          color: '#ef5350'
+        - entity: sensor.octoprint_bed_temperature
+          name: Bed
+          color: '#42a5f5'
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print Activity
+        icon: mdi:chart-box-outline
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Z Position (24h)
+          show_states: true
+          colorize_states: true
+        graph_span: 24h
+        series:
+        - entity: sensor.octoprint_current_z
+          name: Current Z
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          fill_raw: last
+        grid_options:
+          columns: full
+        apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+      - type: history-graph
+        title: Print Progress (24h)
+        hours_to_show: 24
+        show_names: true
+        entities:
+        - entity: sensor.octoprint_print_progress_live
+          name: Progress
+          color: '#66bb6a'
+        grid_options:
+          columns: full
+      - type: history-graph
+        title: Print Duration (24h)
+        hours_to_show: 24
+        show_names: true
+        entities:
+        - entity: sensor.octoprint_elapsed
+          name: Elapsed
+          color: '#26c6da'
+        - entity: sensor.octoprint_time_left
+          name: Remaining
+          color: '#ffa726'
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print History
+        icon: mdi:history
+      - type: markdown
+        content: '**Successful:** {{ states(''sensor.octoprint_successful_prints_count'')
+          }} | **Failed:** {{ states(''sensor.octoprint_failed_prints_count'') }}'
+      - type: history-graph
+        title: Printing State (7 days)
+        hours_to_show: 168
+        show_names: true
+        entities:
+        - entity: binary_sensor.octoprint_printing
+          name: Printing
+          color: '#66bb6a'
+        grid_options:
+          columns: full
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Print Outcomes (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            stacked: true
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: true
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+          legend:
+            show: true
+        series:
+        - entity: sensor.octoprint_successful_prints_count
+          name: Successful
+          color: '#66bb6a'
+          type: column
+          group_by:
+            func: diff
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_failed_prints_count
+          name: Failed
+          color: '#ef5350'
+          type: column
+          group_by:
+            func: diff
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: markdown
+        title: Recent Prints
+        content: "{% for j in (state_attr('sensor.octoprint_recent_prints', 'allPrintJobs')\
+          \ | default([]))[:5] %}\n{% set d = j.get('duration', 0) | int %}\n- **{{\
+          \ j.fileName }}** \u2014 {{ j.printStatusResult | title }}, {{ (d / 3600)\
+          \ | int }}h {{ ((d % 3600) / 60) | int }}m, {{ j.get('filamentModels', {}).get('total',\
+          \ {}).get('usedLength', 0) | round(0) }}mm\n{% endfor %}"
+    - type: grid
+      cards:
+      - type: heading
+        heading: Filament Usage
+        icon: mdi:spool
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_daily
+          name: Used (mm)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_used_total
+          name: Total (mm)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_weekly
+          name: Weekly (mm)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage - Grams (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_weight_daily
+          name: Used (g)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_used_weight_total
+          name: Total (g)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_weight_weekly
+          name: Weekly (g)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+      - type: custom:apexcharts-card
+        header:
+          show: true
+          title: Filament Usage - Cost (30 days)
+          show_states: true
+          colorize_states: true
+        graph_span: 30d
+        apex_config:
+          chart:
+            type: bar
+            height: 300
+          plotOptions:
+            bar:
+              columnWidth: 50%
+          dataLabels:
+            enabled: false
+          yaxis:
+            tickAmount: 4
+            labels:
+              minWidth: 40
+        series:
+        - entity: sensor.octoprint_filament_cost_daily
+          name: Used ($)
+          color: '#26c6da'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_cost_weekly
+          name: Weekly ($)
+          color: '#ffca28'
+          type: column
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        - entity: sensor.octoprint_filament_cost_total
+          name: Total ($)
+          color: '#ab47bc'
+          type: line
+          curve: straight
+          group_by:
+            func: last
+            duration: 1d
+            start_with_last: true
+        grid_options:
+          columns: full
+        span:
+          end: day
+    - type: grid
+      cards:
+      - type: heading
+        heading: OctoPrint Host
+        icon: mdi:server
+      - type: tile
+        entity: sensor.octoprint_disk_usage
+        icon: mdi:harddisk
+      - type: tile
+        entity: sensor.octoprint_cpu_usage
+        icon: mdi:cpu-64-bit
+      - type: tile
+        entity: sensor.octoprint_memory_usage
+        icon: mdi:memory
+      - type: tile
+        entity: sensor.octoprint_core_0_temperature
+        icon: mdi:thermometer
+      - type: tile
+        entity: sensor.octoprint_uptime
+        icon: mdi:clock-outline
+  - type: sections
+    max_columns: 4
+    title: Test
+    path: test
+    sections:
+    - type: grid
+      cards:
+      - type: custom:mushroom-title-card
+        title: "Moonraker \u2013 {{ states('sensor.sparkx_moonraker_current_display_message')\
+          \ }}"
+        subtitle: '{{ states(''sensor.sparkx_moonraker_filename'') }}'
+        alignment: center
+        title_tap_action:
+          action: url
+          url_path: http://moonraker.local/
+      - type: tile
+        entity: sensor.sparkx_moonraker_current_print_state
+        name: Status
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_moonraker_print_duration
+        name: Elapsed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_moonraker_print_eta
+        name: Completion
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_moonraker_progress
+        name: Print Progress
+        icon: mdi:clock-end
+        features:
+        - type: bar-gauge
+          min: 0
+          max: 100
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Controls
+        icon: mdi:gesture-tap-button
+      - type: grid
+        columns: 4
+        square: false
+        cards:
+        - type: custom:button-card
+          entity: button.sparkx_moonraker_pause_print
+          color_type: icon
+          tap_action:
+            action: toggle
+          name: Pause
+        - type: custom:button-card
+          entity: button.sparkx_moonraker_resume_print
+          color_type: icon
+          tap_action:
+            action: toggle
+          name: Resume
+        - type: custom:button-card
+          entity: button.sparkx_moonraker_cancel_print
+          color_type: icon
+          tap_action:
+            action: toggle
+          name: Cancel
+          lock:
+            enabled: false
+          confirmation:
+            text: This will CANCEL the print. Are you sure?
+        - type: custom:button-card
+          entity: button.sparkx_moonraker_emergency_stop
+          color_type: icon
+          color: red
+          tap_action:
+            action: toggle
+          name: Emergency
+          lock:
+            enabled: false
+          confirmation:
+            text: This will REBOOT the printer. Are you sure?
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Printer Temperatures
+        icon: mdi:thermometer
+      - type: custom:apexcharts-card
+        graph_span: 1h
+        header:
+          show: true
+          title: Printer Temperatures
+          show_states: true
+          colorize_states: true
+        apex_config:
+          chart:
+            height: 200
+            legend:
+              show: false
+          grid:
+            xaxis:
+              lines:
+                show: true
+              borderColor: '#555'
+          yaxis:
+          - opposite: true
+            decimals: 0
+            tickAmount: 2
+        all_series_config:
+          stroke_width: 2
+          float_precision: 0
+          show:
+            name_in_header: true
+        series:
+        - entity: sensor.sparkx_moonraker_extruder_temperature
+          name: Hotend
+        - entity: sensor.sparkx_moonraker_bed_temperature
+          name: Bed
+        - entity: sensor.sparkx_moonraker_mcu_temp
+          name: MCU
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Fan Speeds
+        icon: mdi:fan
+      - type: custom:apexcharts-card
+        graph_span: 1h
+        header:
+          show: true
+          title: Fan Speeds
+          show_states: true
+          colorize_states: true
+        apex_config:
+          chart:
+            height: 200
+            legend:
+              show: false
+          grid:
+            xaxis:
+              lines:
+                show: true
+              borderColor: '#555'
+          yaxis:
+          - opposite: true
+            decimals: 0
+            tickAmount: 2
+        all_series_config:
+          stroke_width: 2
+          show:
+            name_in_header: true
+        series:
+        - entity: sensor.sparkx_moonraker_hotend_fan
+          name: Hotend
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Camera
+        icon: mdi:camera
+      - type: conditional
+        conditions:
+        - entity: sensor.sparkx_moonraker_current_print_state
+          state_not: unavailable
+        card:
+          type: picture-entity
+          entity: camera.sparkx_moonraker_back
+          camera_view: live
+          show_name: false
+          show_state: false
+          aspect_ratio: 4x3
+        grid_options:
+          columns: 6
+      - type: conditional
+        conditions:
+        - entity: sensor.sparkx_moonraker_current_print_state
+          state_not: unavailable
+        card:
+          type: picture-entity
+          entity: camera.sparkx_moonraker_thumbnail
+          camera_view: auto
+          show_name: false
+          show_state: false
+        grid_options:
+          columns: 6

.ha_mcp/backups/dashboard.sparkx-i7.20260924_015357.yaml

@@ -0,0 +1,328 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T01:53:57.178530+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: creality_k2_192_168_1_233
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_015513.yaml

@@ -0,0 +1,332 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T01:55:13.613039+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: creality_k2_192_168_1_233
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_015614.yaml

@@ -0,0 +1,341 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T01:56:14.808635+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_023741.yaml

@@ -0,0 +1,332 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:37:41.746451+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_023746.yaml

@@ -0,0 +1,380 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:37:46.568526+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_023809.yaml

@@ -0,0 +1,392 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:38:09.546522+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_chamber_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Chamber
+        severity:
+          green: 0
+          red: 70
+          yellow: 45
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20260924_024512.yaml

@@ -0,0 +1,505 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:45:12.119555+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 6
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_chamber_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Chamber
+        severity:
+          green: 0
+          red: 70
+          yellow: 45
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - title: CFS / Fans
+    path: cfs-fans
+    type: sections
+    icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: CFS Box 1
+        icon: mdi:file-cabinet
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_temperature
+        name: Temperature
+        icon: mdi:thermometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_humidity
+        name: Humidity
+        icon: mdi:water-percent
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_remaining'') }}%
+          left'
+        multiline_secondary: true
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_remaining'') }}%
+          left'
+        multiline_secondary: true
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_remaining'') }}%
+          left'
+        multiline_secondary: true
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_remaining'') }}%
+          left'
+        multiline_secondary: true
+    - type: grid
+      cards:
+      - type: heading
+        heading: External / Active
+        icon: mdi:printer-3d
+      - type: tile
+        entity: sensor.sparkx_i7_active_filament_slot
+        name: Active Slot
+        icon: mdi:swap-horizontal
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_external_remaining'') }}% left'
+        multiline_secondary: true
+      - type: tile
+        entity: sensor.sparkx_i7_filament_status
+        name: Filament Status
+        icon: mdi:printer-3d-nozzle-alert
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Fans
+        icon: mdi:fan
+      - type: tile
+        entity: fan.sparkx_i7_model_fan
+        name: Model Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_case_fan
+        name: Case Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_side_fan
+        name: Side Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4

.ha_mcp/backups/dashboard.sparkx-i7.20260924_024525.yaml

@@ -0,0 +1,582 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:45:25.739434+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - type: picture
+        image_entity: image.sparkx_i7_current_print_preview
+        show_name: false
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_position_x
+        name: X
+        icon: mdi:axis-x-arrow
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_i7_position_y
+        name: Y
+        icon: mdi:axis-y-arrow
+        grid_options:
+          columns: 4
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - type: tile
+        entity: number.sparkx_i7_print_tuning
+        name: Print Tuning
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_print_speed
+        name: Speed
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_real_time_flow
+        name: Real-Time Flow
+        icon: mdi:cube-send
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_current_object
+        name: Object
+        icon: mdi:cube-outline
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_object_count
+        name: Object Count
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_chamber_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Chamber
+        severity:
+          green: 0
+          red: 70
+          yellow: 45
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - type: tile
+        entity: button.sparkx_i7_home_xy_then_z
+        name: Home
+        icon: mdi:home-circle
+        grid_options:
+          columns: 4
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_used_material_length
+        name: Used Length
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - title: CFS / Fans
+    path: cfs-fans
+    type: sections
+    icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: CFS Box 1
+        icon: mdi:file-cabinet
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_temperature
+        name: Temperature
+        icon: mdi:thermometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_humidity
+        name: Humidity
+        icon: mdi:water-percent
+        grid_options:
+          columns: 6
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_remaining'') }}%
+          left'
+        multiline_secondary: true
+    - type: grid
+      cards:
+      - type: heading
+        heading: External / Active
+        icon: mdi:printer-3d
+      - type: tile
+        entity: sensor.sparkx_i7_active_filament_slot
+        name: Active Slot
+        icon: mdi:swap-horizontal
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_external_color') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_external_color'') }}'
+      - type: tile
+        entity: sensor.sparkx_i7_filament_status
+        name: Filament Status
+        icon: mdi:printer-3d-nozzle-alert
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Fans
+        icon: mdi:fan
+      - type: tile
+        entity: fan.sparkx_i7_model_fan
+        name: Model Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_case_fan
+        name: Case Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_side_fan
+        name: Side Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4

.ha_mcp/backups/dashboard.sparkx-i7.20260924_024532.yaml

@@ -0,0 +1,582 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T02:45:32.515465+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - type: picture
+        image_entity: image.sparkx_i7_current_print_preview
+        show_name: false
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_position_x
+        name: X
+        icon: mdi:axis-x-arrow
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_i7_position_y
+        name: Y
+        icon: mdi:axis-y-arrow
+        grid_options:
+          columns: 4
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - type: tile
+        entity: number.sparkx_i7_print_tuning
+        name: Print Tuning
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_print_speed
+        name: Speed
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_real_time_flow
+        name: Real-Time Flow
+        icon: mdi:cube-send
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_current_object
+        name: Object
+        icon: mdi:cube-outline
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_object_count
+        name: Object Count
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_chamber_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Chamber
+        severity:
+          green: 0
+          red: 70
+          yellow: 45
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - type: tile
+        entity: button.sparkx_i7_home_xy_then_z
+        name: Home
+        icon: mdi:home-circle
+        grid_options:
+          columns: 4
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_used_material_length
+        name: Used Length
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - title: CFS / Fans
+    path: cfs-fans
+    type: sections
+    icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: CFS Box 1
+        icon: mdi:file-cabinet
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_temperature
+        name: Temperature
+        icon: mdi:thermometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_humidity
+        name: Humidity
+        icon: mdi:water-percent
+        grid_options:
+          columns: 6
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_remaining'') }}%
+          left'
+        multiline_secondary: true
+    - type: grid
+      cards:
+      - type: heading
+        heading: External / Active
+        icon: mdi:printer-3d
+      - type: tile
+        entity: sensor.sparkx_i7_active_filament_slot
+        name: Active Slot
+        icon: mdi:swap-horizontal
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_external_color') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_external_color'') }}'
+      - type: tile
+        entity: sensor.sparkx_i7_filament_status
+        name: Filament Status
+        icon: mdi:printer-3d-nozzle-alert
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Fans
+        icon: mdi:fan
+      - type: tile
+        entity: fan.sparkx_i7_model_fan
+        name: Model Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_case_fan
+        name: Case Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_side_fan
+        name: Side Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4

.ha_mcp/backups/dashboard.sparkx-i7.20260924_030208.yaml

@@ -0,0 +1,580 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-09-24T03:02:08.718310+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - heading: Printer Status
+        icon: mdi:printer-3d-nozzle
+        type: heading
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - show_state: true
+        show_name: true
+        camera_view: live
+        fit_mode: cover
+        type: picture-entity
+        entity: camera.sparkx_i7_printer_camera
+        camera_image: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+      - type: picture
+        image_entity: image.sparkx_i7_current_print_preview
+        show_name: false
+        grid_options:
+          columns: full
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_position_x
+        name: X
+        icon: mdi:axis-x-arrow
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.sparkx_i7_position_y
+        name: Y
+        icon: mdi:axis-y-arrow
+        grid_options:
+          columns: 4
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - type: tile
+        entity: number.sparkx_i7_print_tuning
+        name: Print Tuning
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_print_speed
+        name: Speed
+        icon: mdi:speedometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_real_time_flow
+        name: Real-Time Flow
+        icon: mdi:cube-send
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_current_object
+        name: Object
+        icon: mdi:cube-outline
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_object_count
+        name: Object Count
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_chamber_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Chamber
+        severity:
+          green: 0
+          red: 70
+          yellow: 45
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - type: tile
+        entity: button.sparkx_i7_home_xy_then_z
+        name: Home
+        icon: mdi:home-circle
+        grid_options:
+          columns: 4
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Filament Used
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: g
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - type: tile
+        entity: sensor.sparkx_i7_used_material_length
+        name: Used Length
+        icon: mdi:counter
+        grid_options:
+          columns: 6
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - title: CFS / Fans
+    path: cfs-fans
+    type: sections
+    icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: CFS Box 1
+        icon: mdi:file-cabinet
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_temperature
+        name: Temperature
+        icon: mdi:thermometer
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_cfs_box_1_humidity
+        name: Humidity
+        icon: mdi:water-percent
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_1_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_2_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_3_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'') }}'
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_box_1_slot_4_color')\
+          \ %}{% if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'') }}'
+    - type: grid
+      cards:
+      - type: heading
+        heading: External / Active
+        icon: mdi:printer-3d
+      - type: tile
+        entity: sensor.sparkx_i7_active_filament_slot
+        name: Active Slot
+        icon: mdi:swap-horizontal
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_cfs_external_color') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        multiline_secondary: true
+        icon_color: '{{ states(''sensor.sparkx_i7_cfs_external_color'') }}'
+      - type: tile
+        entity: sensor.sparkx_i7_filament_status
+        name: Filament Status
+        icon: mdi:printer-3d-nozzle-alert
+        grid_options:
+          columns: 6
+    - type: grid
+      cards:
+      - type: heading
+        heading: Fans
+        icon: mdi:fan
+      - type: tile
+        entity: fan.sparkx_i7_model_fan
+        name: Model Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_case_fan
+        name: Case Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: fan.sparkx_i7_side_fan
+        name: Side Fan
+        icon: mdi:fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4

.ha_mcp/backups/dashboard.sparkx-i7.20261008_164745.yaml

@@ -0,0 +1,683 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-10-08T16:47:45.078937+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - bed: sensor.sparkx_i7_bed_temperature
+        camera: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+        layer: sensor.sparkx_i7_working_layer
+        light: light.sparkx_i7_light
+        name: SparkX i7
+        nozzle: sensor.sparkx_i7_nozzle_temperature
+        pause_btn: button.sparkx_i7_pause_print
+        progress: sensor.sparkx_i7_print_progress
+        resume_btn: button.sparkx_i7_resume_print
+        status: sensor.sparkx_i7_print_status
+        stop_btn: button.sparkx_i7_stop_print
+        time_left: sensor.sparkx_i7_print_time_left
+        total_layers: sensor.sparkx_i7_total_layers
+        type: custom:k-printer-card
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - camera_image: camera.sparkx_i7_printer_camera
+        camera_view: live
+        entity: camera.sparkx_i7_printer_camera
+        fit_mode: cover
+        grid_options:
+          columns: full
+        show_name: true
+        show_state: true
+        type: picture-entity
+      - cards:
+        - grid_options:
+            columns: 6
+          image_entity: image.sparkx_i7_current_print_preview
+          show_name: false
+          type: picture
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z_2_decimals
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - entity: sensor.sparkx_i7_position_x
+        grid_options:
+          columns: 4
+        icon: mdi:axis-x-arrow
+        name: X
+        type: tile
+      - entity: sensor.sparkx_i7_position_y
+        grid_options:
+          columns: 4
+        icon: mdi:axis-y-arrow
+        name: Y
+        type: tile
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:message-alert-outline
+        multiline_secondary: true
+        name: Printer Message
+        primary: '{{ states("sensor.sparkx_i7_print_status") | replace("_", " ") |
+          title }}'
+        secondary: '{% set err = state_attr("sensor.sparkx_i7_print_status", "err")
+          or {} %}{% set code = err.get("errcode", 0) | int(0) %}{% set msg = err.get("value",
+          "") %}{% if state_attr("sensor.sparkx_i7_print_status", "paused_flag") |
+          default(false) %}Print paused{% elif msg %}ERROR {{ code }}: {{ msg }}{%
+          elif code %}Printer error {{ code }}{% else %}No printer error{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:file-document-outline
+        multiline_secondary: true
+        name: Current File
+        primary: Current File
+        secondary: '{% set file = state_attr("sensor.sparkx_i7_print_status", "file")
+          or "" %}{% if file %}{{ file.split("/")[-1] | replace(".gcode", "") }}{%
+          else %}No active file{% endif %}'
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - entity: number.sparkx_i7_print_tuning
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Print Tuning
+        type: tile
+      - entity: sensor.sparkx_i7_print_speed
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Speed
+        type: tile
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 6
+        icon: mdi:cube-send
+        name: Real-Time Flow
+        type: tile
+      - entity: sensor.sparkx_i7_flow_rate
+        grid_options:
+          columns: 6
+        icon: mdi:chart-gantt
+        name: Flow Rate
+        type: tile
+      - entity: sensor.sparkx_i7_current_object
+        grid_options:
+          columns: 6
+        icon: mdi:cube-outline
+        name: Object
+        type: tile
+      - entity: sensor.sparkx_i7_object_count
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        name: Object Count
+        type: tile
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - entity: button.sparkx_i7_home_xy_then_z
+        grid_options:
+          columns: 4
+        icon: mdi:home-circle
+        name: Home
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+        icon: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st in
+          [''printing'', ''paused''] %}mdi:printer-3d-nozzle{% else %}mdi:calendar-today{%
+          endif %}'
+        multiline_secondary: true
+        name: Filament Used
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_filament_weight_estimated'')
+          | round(1) }} g{% else %}No active job{% endif %}'
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st\
+          \ in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_used_material_length')\
+          \ | round(0) }} cm this job{% else %}{{ states('sensor.sparkx_i7_filament_weight_daily')\
+          \ | round(1) }} g \xB7 {{ states('sensor.sparkx_i7_filament_cost_daily')\
+          \ | round(2) }} $ today{% endif %}"
+        type: custom:mushroom-template-card
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        multiline_secondary: true
+        name: Used Length
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_used_material_length'')
+          | round(0) }} cm{% else %}{{ (states(''sensor.sparkx_i7_filament_weight_daily'')
+          | float(0) / states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298))
+          | round(0) }} cm{% endif %}'
+        secondary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if
+          st in [''printing'', ''paused''] %}this job (printer-reported){% else %}today,
+          from today''s weight{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Job Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    path: cfs-fans
+    sections:
+    - cards:
+      - heading: CFS Box 1
+        icon: mdi:file-cabinet
+        type: heading
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: External / Active
+        icon: mdi:printer-3d
+        type: heading
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: 6
+          icon: mdi:swap-horizontal
+          name: Active Slot
+          type: tile
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_external_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_external_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_status
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle-alert
+        name: Filament Status
+        type: tile
+      type: grid
+    - cards:
+      - heading: Fans
+        icon: mdi:fan
+        type: heading
+      - entity: fan.sparkx_i7_model_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Model Fan
+        type: tile
+      - entity: fan.sparkx_i7_case_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Case Fan
+        type: tile
+      - entity: fan.sparkx_i7_side_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Side Fan
+        type: tile
+      type: grid
+    title: CFS / Fans
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20261008_164805.yaml

@@ -0,0 +1,683 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-10-08T16:48:05.400974+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - bed: sensor.sparkx_i7_bed_temperature
+        camera: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+        layer: sensor.sparkx_i7_working_layer
+        light: light.sparkx_i7_light
+        name: SparkX i7
+        nozzle: sensor.sparkx_i7_nozzle_temperature
+        pause_btn: button.sparkx_i7_pause_print
+        progress: sensor.sparkx_i7_print_progress
+        resume_btn: button.sparkx_i7_resume_print
+        status: sensor.sparkx_i7_print_status
+        stop_btn: button.sparkx_i7_stop_print
+        time_left: sensor.sparkx_i7_print_time_left
+        total_layers: sensor.sparkx_i7_total_layers
+        type: custom:k-printer-card
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - camera_image: camera.sparkx_i7_printer_camera
+        camera_view: live
+        entity: camera.sparkx_i7_printer_camera
+        fit_mode: cover
+        grid_options:
+          columns: full
+        show_name: true
+        show_state: true
+        type: picture-entity
+      - cards:
+        - grid_options:
+            columns: 6
+          image_entity: image.sparkx_i7_current_print_preview
+          show_name: false
+          type: picture
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z_2_decimals
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - entity: sensor.sparkx_i7_position_x
+        grid_options:
+          columns: 4
+        icon: mdi:axis-x-arrow
+        name: X
+        type: tile
+      - entity: sensor.sparkx_i7_position_y
+        grid_options:
+          columns: 4
+        icon: mdi:axis-y-arrow
+        name: Y
+        type: tile
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:message-alert-outline
+        multiline_secondary: true
+        name: Printer Message
+        primary: '{{ states("sensor.sparkx_i7_print_status") | replace("_", " ") |
+          title }}'
+        secondary: '{% set err = state_attr("sensor.sparkx_i7_print_status", "err")
+          or {} %}{% set code = err.get("errcode", 0) | int(0) %}{% set msg = err.get("value",
+          "") %}{% if state_attr("sensor.sparkx_i7_print_status", "paused_flag") |
+          default(false) %}Print paused{% elif msg %}ERROR {{ code }}: {{ msg }}{%
+          elif code %}Printer error {{ code }}{% else %}No printer error{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:file-document-outline
+        multiline_secondary: true
+        name: Current File
+        primary: Current File
+        secondary: '{% set file = state_attr("sensor.sparkx_i7_print_status", "file")
+          or "" %}{% if file %}{{ file.split("/")[-1] | replace(".gcode", "") }}{%
+          else %}No active file{% endif %}'
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - entity: number.sparkx_i7_print_tuning
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Print Tuning
+        type: tile
+      - entity: sensor.sparkx_i7_print_speed
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Speed
+        type: tile
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 6
+        icon: mdi:cube-send
+        name: Real-Time Flow
+        type: tile
+      - entity: sensor.sparkx_i7_flow_rate
+        grid_options:
+          columns: 6
+        icon: mdi:chart-gantt
+        name: Flow Rate
+        type: tile
+      - entity: sensor.sparkx_i7_current_object
+        grid_options:
+          columns: 6
+        icon: mdi:cube-outline
+        name: Object
+        type: tile
+      - entity: sensor.sparkx_i7_object_count
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        name: Object Count
+        type: tile
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - entity: button.sparkx_i7_home_xy_then_z
+        grid_options:
+          columns: 4
+        icon: mdi:home-circle
+        name: Home
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+        icon: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st in
+          [''printing'', ''paused''] %}mdi:printer-3d-nozzle{% else %}mdi:calendar-today{%
+          endif %}'
+        multiline_secondary: true
+        name: Filament Used
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_filament_weight_estimated'')
+          | round(1) }} g{% else %}No active job{% endif %}'
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st\
+          \ in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_used_material_length')\
+          \ | round(0) }} cm this job{% else %}{{ states('sensor.sparkx_i7_filament_weight_daily')\
+          \ | round(1) }} g \xB7 {{ states('sensor.sparkx_i7_filament_cost_daily')\
+          \ | round(2) }} $ today{% endif %}"
+        type: custom:mushroom-template-card
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        multiline_secondary: true
+        name: Used Length
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_used_material_length'')
+          | round(0) }} cm{% else %}{{ (states(''sensor.sparkx_i7_filament_weight_daily'')
+          | float(0) / states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298))
+          | round(0) }} cm{% endif %}'
+        secondary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if
+          st in [''printing'', ''paused''] %}this job (printer-reported){% else %}today,
+          from today''s weight{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Job Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    path: cfs-fans
+    sections:
+    - cards:
+      - heading: CFS Box 1
+        icon: mdi:file-cabinet
+        type: heading
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: External / Active
+        icon: mdi:printer-3d
+        type: heading
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: 6
+          icon: mdi:swap-horizontal
+          name: Active Slot
+          type: tile
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_external_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_external_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_status
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle-alert
+        name: Filament Status
+        type: tile
+      type: grid
+    - cards:
+      - heading: Fans
+        icon: mdi:fan
+        type: heading
+      - entity: fan.sparkx_i7_model_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Model Fan
+        type: tile
+      - entity: fan.sparkx_i7_case_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Case Fan
+        type: tile
+      - entity: fan.sparkx_i7_side_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Side Fan
+        type: tile
+      type: grid
+    title: CFS / Fans
+    type: sections

.ha_mcp/backups/dashboard.sparkx-i7.20261008_175847.yaml

@@ -0,0 +1,924 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: sparkx-i7
+captured: '2026-10-08T17:58:47.063357+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - max_columns: 4
+    path: print
+    sections:
+    - cards:
+      - bed: sensor.sparkx_i7_bed_temperature
+        camera: camera.sparkx_i7_printer_camera
+        grid_options:
+          columns: full
+        layer: sensor.sparkx_i7_working_layer
+        light: light.sparkx_i7_light
+        name: SparkX i7
+        nozzle: sensor.sparkx_i7_nozzle_temperature
+        pause_btn: button.sparkx_i7_pause_print
+        progress: sensor.sparkx_i7_print_progress
+        resume_btn: button.sparkx_i7_resume_print
+        status: sensor.sparkx_i7_print_status
+        stop_btn: button.sparkx_i7_stop_print
+        time_left: sensor.sparkx_i7_print_time_left
+        total_layers: sensor.sparkx_i7_total_layers
+        type: custom:k-printer-card
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint
+      - grid_options:
+          columns: full
+        type: custom:webrtc-camera
+        ui: true
+        url: octoprint2
+      - camera_image: camera.sparkx_i7_printer_camera
+        camera_view: live
+        entity: camera.sparkx_i7_printer_camera
+        fit_mode: cover
+        grid_options:
+          columns: full
+        show_name: true
+        show_state: true
+        type: picture-entity
+      - cards:
+        - grid_options:
+            columns: 6
+          image_entity: image.sparkx_i7_current_print_preview
+          show_name: false
+          type: picture
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 12
+        icon: mdi:state-machine
+        name: Status
+        type: tile
+      - entity: sensor.sparkx_i7_position_z_2_decimals
+        grid_options:
+          columns: 4
+        icon: mdi:axis-z-arrow
+        name: Current Z
+        type: tile
+      - entity: sensor.sparkx_i7_position_x
+        grid_options:
+          columns: 4
+        icon: mdi:axis-x-arrow
+        name: X
+        type: tile
+      - entity: sensor.sparkx_i7_position_y
+        grid_options:
+          columns: 4
+        icon: mdi:axis-y-arrow
+        name: Y
+        type: tile
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:message-alert-outline
+        multiline_secondary: true
+        name: Printer Message
+        primary: '{{ states("sensor.sparkx_i7_print_status") | replace("_", " ") |
+          title }}'
+        secondary: '{% set err = state_attr("sensor.sparkx_i7_print_status", "err")
+          or {} %}{% set code = err.get("errcode", 0) | int(0) %}{% set msg = err.get("value",
+          "") %}{% if state_attr("sensor.sparkx_i7_print_status", "paused_flag") |
+          default(false) %}Print paused{% elif msg %}ERROR {{ code }}: {{ msg }}{%
+          elif code %}Printer error {{ code }}{% else %}No printer error{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_print_status
+        grid_options:
+          columns: 6
+        icon: mdi:file-document-outline
+        multiline_secondary: true
+        name: Current File
+        primary: Current File
+        secondary: '{% set file = state_attr("sensor.sparkx_i7_print_status", "file")
+          or "" %}{% if file %}{{ file.split("/")[-1] | replace(".gcode", "") }}{%
+          else %}No active file{% endif %}'
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: Print Progress
+        icon: mdi:progress-clock
+        type: heading
+      - entity: sensor.sparkx_i7_print_progress
+        grid_options:
+          columns: 6
+          rows: 3
+        max: 100
+        min: 0
+        name: Progress
+        severity:
+          green: 0
+          red: 90
+          yellow: 40
+        type: gauge
+        unit: '%'
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-start
+        multiline_secondary: true
+        name: Elapsed
+        primary: Elapsed
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_job_time'') | float(0)
+          %}{% set h = (s / 3600) | int %}{% set m = ((s % 3600) / 60) | int %}{%
+          if h %}{{ h }} hr {{ m }} min{% else %}{{ m }} min{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-end
+        multiline_secondary: true
+        name: Remaining
+        primary: Remaining
+        secondary: '{% set s = states(''sensor.sparkx_i7_print_time_left'') | float(-1)
+          %}{% if s <= 0 %}No estimate{% else %}{% set h = (s / 3600) | int %}{% set
+          m = ((s % 3600) / 60) | int %}{% if h %}{{ h }} hr {{ m }} min{% else %}{{
+          m }} min{% endif %}{% endif %}'
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:clock-outline
+        multiline_secondary: true
+        primary: Est. Finish
+        secondary: "{% set left = states('sensor.sparkx_i7_print_time_left') | int(0)\
+          \ %}{% if left > 0 %}{{ (now() + timedelta(seconds=left)).strftime('%I:%M\
+          \ %p').lstrip('0') }}{% else %}\u2014{% endif %}"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:layers
+        multiline_secondary: true
+        name: Layer
+        primary: Layer
+        secondary: '{% set c = states(''sensor.sparkx_i7_working_layer'') | int(0)
+          %}{% set t = states(''sensor.sparkx_i7_total_layers'') | int(0) %}{{ c }}
+          of {{ t }}'
+        type: custom:mushroom-template-card
+      - entity: light.sparkx_i7_light
+        grid_options:
+          columns: 6
+        icon: mdi:lightbulb
+        name: Printer Light
+        type: tile
+      - detail: 1
+        entity: sensor.sparkx_i7_print_progress
+        graph: line
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        name: Progress History
+        type: sensor
+      - entity: number.sparkx_i7_print_tuning
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Print Tuning
+        type: tile
+      - entity: sensor.sparkx_i7_print_speed
+        grid_options:
+          columns: 6
+        icon: mdi:speedometer
+        name: Speed
+        type: tile
+      - entity: sensor.sparkx_i7_real_time_flow
+        grid_options:
+          columns: 6
+        icon: mdi:cube-send
+        name: Real-Time Flow
+        type: tile
+      - entity: sensor.sparkx_i7_flow_rate
+        grid_options:
+          columns: 6
+        icon: mdi:chart-gantt
+        name: Flow Rate
+        type: tile
+      - entity: sensor.sparkx_i7_current_object
+        grid_options:
+          columns: 6
+        icon: mdi:cube-outline
+        name: Object
+        type: tile
+      - entity: sensor.sparkx_i7_object_count
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        name: Object Count
+        type: tile
+      type: grid
+    - cards:
+      - heading: Temperatures
+        icon: mdi:thermometer
+        type: heading
+      - entity: sensor.sparkx_i7_nozzle_temperature
+        grid_options:
+          columns: 4
+        max: 300
+        min: 0
+        name: Nozzle
+        severity:
+          green: 0
+          red: 240
+          yellow: 180
+        type: gauge
+        unit: "\xB0C"
+      - entity: sensor.sparkx_i7_bed_temperature
+        grid_options:
+          columns: 4
+        max: 100
+        min: 0
+        name: Bed
+        severity:
+          green: 0
+          red: 100
+          yellow: 60
+        type: gauge
+        unit: "\xB0C"
+      - entity: number.sparkx_i7_nozzle_target
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        name: Nozzle Target
+        type: tile
+      - entity: number.sparkx_i7_bed_target
+        grid_options:
+          columns: 6
+        icon: mdi:radiator
+        name: Bed Target
+        type: tile
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_nozzle_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Nozzle Temperature
+        type: history-graph
+      - entities:
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Actual
+        - color: '#4caf50'
+          entity: number.sparkx_i7_bed_target
+          name: Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Bed Temperature
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Controls
+        icon: mdi:gesture-tap-button
+        type: heading
+      - entity: button.sparkx_i7_pause_print
+        grid_options:
+          columns: 4
+        icon: mdi:pause
+        name: Pause
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_pause_print
+        type: tile
+      - entity: button.sparkx_i7_resume_print
+        grid_options:
+          columns: 4
+        icon: mdi:play
+        name: Resume
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_resume_print
+        type: tile
+      - entity: button.sparkx_i7_reconnect
+        grid_options:
+          columns: 4
+        icon: mdi:lan-connect
+        name: Connect
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_reconnect
+        type: tile
+      - entity: button.sparkx_i7_stop_print
+        grid_options:
+          columns: 4
+        icon: mdi:cancel
+        name: Cancel Print
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_stop_print
+        type: tile
+      - entity: button.sparkx_i7_home_xy_then_z
+        grid_options:
+          columns: 4
+        icon: mdi:home-circle
+        name: Home
+        tap_action:
+          action: perform-action
+          perform_action: button.press
+          target:
+            entity_id: button.sparkx_i7_home_xy_then_z
+        type: tile
+      type: grid
+    - cards:
+      - heading: Filament
+        icon: mdi:printer-3d-nozzle-outline
+        type: heading
+      - entity: sensor.sparkx_i7_filament_weight_estimated
+        grid_options:
+          columns: 6
+        icon: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st in
+          [''printing'', ''paused''] %}mdi:printer-3d-nozzle{% else %}mdi:calendar-today{%
+          endif %}'
+        multiline_secondary: true
+        name: Filament Used
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_filament_weight_estimated'')
+          | round(1) }} g{% else %}No active job{% endif %}'
+        secondary: "{% set st = states('sensor.sparkx_i7_print_status') %}{% if st\
+          \ in ['printing', 'paused'] %}{{ states('sensor.sparkx_i7_used_material_length')\
+          \ | round(0) }} cm this job{% else %}{{ states('sensor.sparkx_i7_filament_weight_daily')\
+          \ | round(1) }} g \xB7 {{ states('sensor.sparkx_i7_filament_cost_daily')\
+          \ | round(2) }} $ today{% endif %}"
+        type: custom:mushroom-template-card
+      - entity: input_number.sparkx_i7_filament_g_cm
+        grid_options:
+          columns: 6
+        icon: mdi:weight-kilogram
+        name: g/cm
+        type: tile
+      - entity: sensor.sparkx_i7_used_material_length
+        grid_options:
+          columns: 6
+        icon: mdi:counter
+        multiline_secondary: true
+        name: Used Length
+        primary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if st
+          in [''printing'', ''paused''] %}{{ states(''sensor.sparkx_i7_used_material_length'')
+          | round(0) }} cm{% else %}{{ (states(''sensor.sparkx_i7_filament_weight_daily'')
+          | float(0) / states(''input_number.sparkx_i7_filament_g_cm'') | float(0.0298))
+          | round(0) }} cm{% endif %}'
+        secondary: '{% set st = states(''sensor.sparkx_i7_print_status'') %}{% if
+          st in [''printing'', ''paused''] %}this job (printer-reported){% else %}today,
+          from today''s weight{% endif %}'
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_cost
+        grid_options:
+          columns: 3
+        icon: mdi:cash
+        name: Job Cost (total)
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_daily
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: Today
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_weekly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Week
+        type: tile
+      - entity: sensor.sparkx_i7_filament_cost_monthly
+        grid_options:
+          columns: 3
+        icon: mdi:cash-multiple
+        name: This Month
+        type: tile
+      type: grid
+    title: Print
+    type: sections
+  - max_columns: 2
+    path: history
+    sections:
+    - cards:
+      - heading: Temperature History
+        icon: mdi:chart-line-variant
+        type: heading
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#ffab91'
+          entity: number.sparkx_i7_nozzle_target
+          name: Nozzle Target
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        - color: '#90caf9'
+          entity: number.sparkx_i7_bed_target
+          name: Bed Target
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Temperatures (24h)
+        type: history-graph
+      - entities:
+        - color: '#ef5350'
+          entity: sensor.sparkx_i7_nozzle_temperature
+          name: Nozzle
+        - color: '#42a5f5'
+          entity: sensor.sparkx_i7_bed_temperature
+          name: Bed
+        expand_legend: true
+        grid_options:
+          columns: full
+        hours_to_show: 168
+        show_names: true
+        title: Temperatures (7 days)
+        type: history-graph
+      type: grid
+    - cards:
+      - heading: Print Activity
+        icon: mdi:chart-box-outline
+        type: heading
+      - apex_config:
+          chart:
+            height: 300
+          stroke:
+            width: 1
+        graph_span: 24h
+        grid_options:
+          columns: full
+        header:
+          colorize_states: true
+          show: true
+          show_states: true
+          title: Z Position (24h)
+        series:
+        - color: '#ab47bc'
+          curve: straight
+          entity: sensor.sparkx_i7_position_z
+          fill_raw: last
+          name: Current Z
+          type: line
+        type: custom:apexcharts-card
+      - entities:
+        - color: '#66bb6a'
+          entity: sensor.sparkx_i7_print_progress
+          name: Progress
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Progress (24h)
+        type: history-graph
+      - entities:
+        - color: '#26c6da'
+          entity: sensor.sparkx_i7_print_job_time
+          name: Elapsed
+        - color: '#ffa726'
+          entity: sensor.sparkx_i7_print_time_left
+          name: Remaining
+        grid_options:
+          columns: full
+        hours_to_show: 24
+        show_names: true
+        title: Print Duration (24h)
+        type: history-graph
+      type: grid
+    title: History
+    type: sections
+  - icon: mdi:printer-3d-nozzle-outline
+    max_columns: 4
+    path: cfs-fans
+    sections:
+    - cards:
+      - heading: CFS Box 1
+        icon: mdi:file-cabinet
+        type: heading
+      - entity: sensor.sparkx_i7_cfs_box_1_temperature
+        grid_options:
+          columns: 6
+        icon: mdi:thermometer
+        name: Temperature
+        type: tile
+      - entity: sensor.sparkx_i7_cfs_box_1_humidity
+        grid_options:
+          columns: 6
+        icon: mdi:water-percent
+        name: Humidity
+        type: tile
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_1_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 1
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_1_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_1_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_1_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_2_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 2
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_2_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_2_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_2_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_3_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 3
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_3_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_3_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_3_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_box_1_slot_4_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: Slot 4
+        primary: '{{ states(''sensor.sparkx_i7_cfs_box_1_slot_4_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_slot_4_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_box_1_slot_4_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      type: grid
+    - cards:
+      - heading: External / Active
+        icon: mdi:printer-3d
+        type: heading
+      - cards:
+        - entity: sensor.sparkx_i7_active_filament_slot
+          grid_options:
+            columns: 6
+          icon: mdi:swap-horizontal
+          name: Active Slot
+          type: tile
+        - entity: sensor.sparkx_i7_active_filament_slot
+          icon: mdi:palette
+          icon_color: '{% set color = state_attr(''sensor.sparkx_i7_active_filament_slot'',
+            ''color'') | default('''') | string %}{% set core = color | replace(''#'',
+            '''') %}{% if core | length >= 6 %}#{{ core[-6:] }}{% else %}var(--primary-text-color){%
+            endif %}'
+          multiline_secondary: true
+          name: Active Color
+          primary: '{% set slot = states(''sensor.sparkx_i7_active_filament_slot'')
+            %}{% if ''Slot 1'' in slot %}{{ states(''sensor.sparkx_i7_slot_1_color_name'')
+            }}{% elif ''Slot 2'' in slot %}{{ states(''sensor.sparkx_i7_slot_2_color_name'')
+            }}{% elif ''Slot 3'' in slot %}{{ states(''sensor.sparkx_i7_slot_3_color_name'')
+            }}{% elif ''Slot 4'' in slot %}{{ states(''sensor.sparkx_i7_slot_4_color_name'')
+            }}{% elif slot == ''External'' %}{{ states(''sensor.sparkx_i7_external_color_name'')
+            }}{% else %}Unknown{% endif %}'
+          secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+            \ %}{{ slot }}{% if state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') %} \xB7 {{ state_attr('sensor.sparkx_i7_active_filament_slot',\
+            \ 'filament') }}{% endif %}"
+          type: custom:mushroom-template-card
+        grid_options:
+          columns: full
+        type: horizontal-stack
+      - grid_options:
+          columns: 6
+        icon: mdi:lan-outline
+        icon_color: '{% set c = states(''sensor.sparkx_i7_cfs_external_color'')|default('''')|string
+          %}{% set core = c|replace(''#'','''') %}{% if core|length >= 6 %}#{{ core[-6:]
+          }}{% endif %}'
+        multiline_secondary: true
+        name: External Filament
+        primary: '{{ states(''sensor.sparkx_i7_cfs_external_filament'') }}'
+        secondary: "{% set col = states('sensor.sparkx_i7_external_color_name') %}{%\
+          \ if col %}{{ col }} \xB7 {% endif %}{{ states('sensor.sparkx_i7_cfs_external_remaining')\
+          \ }}% left"
+        type: custom:mushroom-template-card
+      - entity: sensor.sparkx_i7_filament_status
+        grid_options:
+          columns: 6
+        icon: mdi:printer-3d-nozzle-alert
+        name: Filament Status
+        type: tile
+      type: grid
+    - cards:
+      - heading: Fans
+        icon: mdi:fan
+        type: heading
+      - entity: fan.sparkx_i7_model_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Model Fan
+        type: tile
+      - entity: fan.sparkx_i7_case_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Case Fan
+        type: tile
+      - entity: fan.sparkx_i7_side_fan
+        features:
+        - type: fan-speed
+        grid_options:
+          columns: 4
+        icon: mdi:fan
+        name: Side Fan
+        type: tile
+      type: grid
+    title: CFS / Fans
+    type: sections
+  - title: Spoolman
+    path: spoolman
+    icon: mdi:package-variant-closed
+    type: sections
+    max_columns: 4
+    sections:
+    - type: grid
+      cards:
+      - type: heading
+        heading: Overture Black ABS (Spool 1)
+        icon: mdi:spool
+      - type: gauge
+        entity: sensor.spoolman_spool_1
+        name: Remaining
+        unit: g
+        min: 0
+        max: 1000
+        severity:
+          red: 0
+          yellow: 300
+          green: 600
+        grid_options:
+          columns: 6
+          rows: 3
+      - type: custom:mushroom-template-card
+        entity: sensor.spoolman_spool_1_color_hex
+        name: Color
+        icon: mdi:palette
+        icon_color: '{% set c = states(''sensor.spoolman_spool_1_color_hex'')|replace(''#'','''')|lower
+          %}{% if c|length == 6 %}#{{ c }}{% else %}var(--primary-text-color){% endif
+          %}'
+        primary: '{{ states(''sensor.spoolman_spool_1_color_hex'') }}'
+        secondary: "{{ states('sensor.spoolman_spool_1_filament_name') }} \xB7 {{\
+          \ states('sensor.spoolman_spool_1_material') }}"
+        multiline_secondary: true
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.spoolman_spool_1_used_weight
+        name: Used Weight
+        icon: mdi:scale-balance
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_used_percentage
+        name: Used %
+        icon: mdi:chart-donut
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_remaining_length
+        name: Remaining Length
+        icon: mdi:ruler
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_used_length
+        name: Used Length
+        icon: mdi:ruler-square
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_spool_weight
+        name: Empty Spool Weight
+        icon: mdi:scale
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_filament_weight
+        name: Full Spool Weight
+        icon: mdi:weight-kilogram
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_vendor
+        name: Vendor
+        icon: mdi:factory
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_material
+        name: Material
+        icon: mdi:layers-triple
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_diameter
+        name: Diameter
+        icon: mdi:circle-outline
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_density
+        name: Density
+        icon: mdi:weight-gram
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_filament_name
+        name: Filament Name
+        icon: mdi:tag-outline
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: select.spoolman_spool_1_location
+        name: Location
+        icon: mdi:map-marker-outline
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_estimated_runout
+        name: Est. Runout
+        icon: mdi:calendar-alert
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.spoolman_spool_1_registered
+        name: Registered
+        icon: mdi:calendar-check-outline
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: binary_sensor.spoolman_spool_1_low_filament
+        name: Low Filament
+        icon: mdi:alert-circle-outline
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_flow_rate
+        name: Flow Rate
+        icon: mdi:progress-clock
+        grid_options:
+          columns: 4
+      - type: tile
+        entity: sensor.spoolman_spool_1_id
+        name: Spool ID
+        icon: mdi:identifier
+        grid_options:
+          columns: 4
+      - type: markdown
+        content: "**Spoolman UI:** [http://2c829f0e-spoolman.local.hass.io:7912](http://2c829f0e-spoolman.local.hass.io:7912)\n\
+          \n**Changing filaments:** 1. Set the slot color in the CFS app. 2. Create\
+          \ the spool in Spoolman with a matching color hex. No Home Assistant changes\
+          \ needed \u2014 new spools appear here automatically."
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Adjust Remaining
+        icon: mdi:pencil-outline
+      - type: entities
+        title: Set value (g)
+        show_header_toggle: false
+        entities:
+        - input_number.spoolman_set_remaining
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.spoolman_spool_1
+        name: Apply to Spool 1
+        icon: mdi:content-save-outline
+        grid_options:
+          columns: 6
+        tap_action:
+          action: perform-action
+          perform_action: script.spoolman_set_spool_remaining
+          data:
+            spool_id: 1
+          confirmation:
+            text: Overwrite Spool 1 remaining weight in Spoolman?
+      - type: markdown
+        content: "1. Type the new remaining grams above. 2. Tap **Apply to Spool 1**.\
+          \ The value is **absolute** \u2014 it replaces Spoolman's remaining weight,\
+          \ and print deductions continue from there. Wait for a running print to\
+          \ finish before adjusting."
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Print Linkage
+        icon: mdi:printer-3d-nozzle
+      - type: tile
+        entity: input_text.sparkx_i7_print_spool_latch
+        name: Latched Spool ID
+        icon: mdi:link-variant
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: sensor.sparkx_i7_filament_weight_estimated
+        name: Current Job Weight
+        icon: mdi:weight-gram
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: automation.sparkx_i7_latch_print_spool_for_spoolman
+        name: Latch Automation
+        icon: mdi:link
+        grid_options:
+          columns: 6
+      - type: tile
+        entity: automation.sparkx_i7_deduct_filament_in_spoolman_on_print_complete
+        name: Deduct Automation
+        icon: mdi:minus-circle-outline
+        grid_options:
+          columns: 6
+      - type: custom:mushroom-template-card
+        name: Next Deduction Match
+        icon: mdi:magnet
+        icon_color: mdi:link
+        primary: '{{ states(''sensor.sparkx_i7_active_filament_slot'') }}'
+        secondary: "{% set slot = states('sensor.sparkx_i7_active_filament_slot')\
+          \ %}{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot|lower|replace(' ','_'))\
+          \ ~ '_color' %}{% set color = states(ce)|replace('#','')|lower %}{% set\
+          \ ns = namespace(id='') %}{% for e in integration_entities('spoolman') %}{%\
+          \ if e.endswith('_color_hex') and (states(e)|lower) == color %}{% set ns.id\
+          \ = states(e[:-10] ~ '_id') %}{% endif %}{% endfor %}{% if ns.id %}Color\
+          \ #{{ color }} \u2192 deducts from spool {{ ns.id }} ({% set fn = 'sensor.spoolman_spool_'\
+          \ ~ ns.id ~ '_filament_name' %}{{ states(fn) }}){% elif color in ['', 'unknown',\
+          \ 'unavailable'] %}Slot color unavailable{% else %}Color #{{ color }} \u2014\
+          \ no matching spool{% endif %}"
+        multiline_secondary: true
+        grid_options:
+          columns: full
+    - type: grid
+      cards:
+      - type: heading
+        heading: Spool History
+        icon: mdi:history
+      - type: history-graph
+        title: Remaining & Used (7 days)
+        hours_to_show: 168
+        show_names: true
+        entities:
+        - entity: sensor.spoolman_spool_1
+          name: Remaining
+        - entity: sensor.spoolman_spool_1_used_weight
+          name: Used
+        grid_options:
+          columns: full

.ha_mcp/backups/dashboard.spoolman-ui.20261009_002240.yaml

@@ -0,0 +1,15 @@
+# ha_mcp_backup
+schema_version: 1
+domain: dashboard
+entity_id: spoolman-ui
+captured: '2026-10-09T00:22:40.531965+00:00'
+tool: ha_config_set_dashboard
+config:
+  views:
+  - title: Spoolman
+    path: spoolman
+    type: panel
+    cards:
+    - type: iframe
+      url: http://192.168.1.140:7912
+      aspect_ratio: 100%

.ha_mcp/backups/entity.input_text.sparkx_i7_print_spool_latch.20261008_171215.yaml

@@ -0,0 +1,23 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: input_text.sparkx_i7_print_spool_latch
+captured: '2026-10-08T17:12:15.440599+00:00'
+tool: ha_set_entity
+config:
+  entity_id: input_text.sparkx_i7_print_spool_latch
+  state: unknown
+  attributes:
+    mode: text
+    min: 0
+    max: 100
+    pattern: null
+    editable: true
+    friendly_name: SparkX i7 Print Spool Latch
+  last_changed: '2026-10-08T16:31:30.856182+00:00'
+  last_reported: '2026-10-08T16:31:30.856673+00:00'
+  last_updated: '2026-10-08T16:31:30.856182+00:00'
+  context:
+    id: 01M4E5P2H8J5XCWZG5TCX7AHCK
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.input_text.total_filament_used.20261010_064039.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: input_text.total_filament_used
+captured: '2026-10-10T06:40:39.314783+00:00'
+tool: ha_set_entity
+config:
+  entity_id: input_text.total_filament_used
+  state: unknown
+  attributes:
+    mode: text
+    min: 0
+    max: 100
+    pattern: null
+    editable: true
+    icon: mdi:counter
+    friendly_name: Total Filament Used
+  last_changed: '2026-10-10T06:40:34.866852+00:00'
+  last_reported: '2026-10-10T06:40:34.867787+00:00'
+  last_updated: '2026-10-10T06:40:34.866852+00:00'
+  context:
+    id: 01M4J8NFHJPBQD3E3BK5Y65S7Z
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.sensor.spoolman_filament_1.20261009_010434.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: sensor.spoolman_filament_1
+captured: '2026-10-09T01:04:34.967384+00:00'
+tool: ha_remove_entity
+config:
+  entity_id: sensor.spoolman_filament_1
+  state: unavailable
+  attributes:
+    restored: true
+    state_class: measurement
+    device_class: weight
+    icon: mdi:printer-3d-nozzle
+    friendly_name: Filaments Overture Black ABS
+    supported_features: 0
+    unit_of_measurement: g
+  last_changed: '2026-10-09T00:42:15.531885+00:00'
+  last_reported: '2026-10-09T00:42:15.531885+00:00'
+  last_updated: '2026-10-09T00:42:15.531885+00:00'
+  context:
+    id: 01M4F1RN3B72ZCY9YK8Y43F2CG
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.sensor.spoolman_filament_2.20261009_010434.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: sensor.spoolman_filament_2
+captured: '2026-10-09T01:04:34.964180+00:00'
+tool: ha_remove_entity
+config:
+  entity_id: sensor.spoolman_filament_2
+  state: unavailable
+  attributes:
+    restored: true
+    state_class: measurement
+    device_class: weight
+    icon: mdi:printer-3d-nozzle
+    friendly_name: Filaments Generic PLA PLA
+    supported_features: 0
+    unit_of_measurement: g
+  last_changed: '2026-10-09T00:55:34.767842+00:00'
+  last_reported: '2026-10-09T00:55:34.767842+00:00'
+  last_updated: '2026-10-09T00:55:34.767842+00:00'
+  context:
+    id: 01M4F2H1KFTKXWS3G5NHFAWH80
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.sensor.spoolman_filament_7.20261009_184853.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: sensor.spoolman_filament_7
+captured: '2026-10-09T18:48:53.850639+00:00'
+tool: ha_remove_entity
+config:
+  entity_id: sensor.spoolman_filament_7
+  state: unavailable
+  attributes:
+    restored: true
+    state_class: measurement
+    device_class: weight
+    icon: mdi:printer-3d-nozzle
+    friendly_name: Filaments Black Hyper RFID PLA
+    supported_features: 0
+    unit_of_measurement: g
+  last_changed: '2026-10-09T18:48:49.033085+00:00'
+  last_reported: '2026-10-09T18:48:49.033085+00:00'
+  last_updated: '2026-10-09T18:48:49.033085+00:00'
+  context:
+    id: 01M4GZY6M98V7PHG0YC8EQN8SE
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.sensor.spoolman_filament_8.20261009_184853.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: sensor.spoolman_filament_8
+captured: '2026-10-09T18:48:53.853156+00:00'
+tool: ha_remove_entity
+config:
+  entity_id: sensor.spoolman_filament_8
+  state: unavailable
+  attributes:
+    restored: true
+    state_class: measurement
+    device_class: weight
+    icon: mdi:printer-3d-nozzle
+    friendly_name: Filaments White Hyper RFID PLA
+    supported_features: 0
+    unit_of_measurement: g
+  last_changed: '2026-10-09T18:48:49.033206+00:00'
+  last_reported: '2026-10-09T18:48:49.033206+00:00'
+  last_updated: '2026-10-09T18:48:49.033206+00:00'
+  context:
+    id: 01M4GZY6M9XM8RXZN954T76C8X
+    parent_id: null
+    user_id: null

.ha_mcp/backups/entity.sensor.spoolman_filament_9.20261009_184853.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: entity
+entity_id: sensor.spoolman_filament_9
+captured: '2026-10-09T18:48:53.855002+00:00'
+tool: ha_remove_entity
+config:
+  entity_id: sensor.spoolman_filament_9
+  state: unavailable
+  attributes:
+    restored: true
+    state_class: measurement
+    device_class: weight
+    icon: mdi:printer-3d-nozzle
+    friendly_name: Filaments Hyper PLA (Naval Adventures) Hyper PLA
+    supported_features: 0
+    unit_of_measurement: g
+  last_changed: '2026-10-09T18:48:49.033339+00:00'
+  last_reported: '2026-10-09T18:48:49.033339+00:00'
+  last_updated: '2026-10-09T18:48:49.033339+00:00'
+  context:
+    id: 01M4GZY6M9D3XRZC93ZNADDB5K
+    parent_id: null
+    user_id: null

.ha_mcp/backups/helper_template.01M4J95V58XWWCRA3X26S6ZDN6.20261010_065550.yaml

@@ -0,0 +1,20 @@
+# ha_mcp_backup
+schema_version: 1
+domain: helper_template
+entity_id: 01M4J95V58XWWCRA3X26S6ZDN6
+captured: '2026-10-10T06:55:50.281069+00:00'
+tool: ha_config_set_helper
+config:
+  entry_id: 01M4J95V58XWWCRA3X26S6ZDN6
+  options:
+    template_type: sensor
+    name: Active Spool
+    state: '{% set sid = states(''sensor.sparkx_moonraker_spool_id'') | int(0) %}{%
+      if sid == 0 %}No active spool{% else %}{% set eid = ''sensor.spoolman_spool_''
+      ~ sid %}{{ state_attr(eid, ''friendly_name'') or (''Spool '' ~ sid) }}{% endif
+      %}'
+  entities:
+  - entity_id: sensor.active_spool
+    unique_id: 01M4J95V58XWWCRA3X26S6ZDN6
+    name: null
+    original_name: Active Spool

.ha_mcp/backups/script.spoolman_set_spool_remaining.20261008_175220.yaml

@@ -0,0 +1,24 @@
+# ha_mcp_backup
+schema_version: 1
+domain: script
+entity_id: spoolman_set_spool_remaining
+captured: '2026-10-08T17:52:20.969671+00:00'
+tool: ha_config_set_script
+config:
+  alias: Spoolman - Set Spool Remaining
+  fields:
+    spool_id:
+      required: true
+      name: Spool ID
+      selector:
+        number:
+          min: 1
+          max: 9999
+          mode: box
+  sequence:
+  - action: spoolman.patch_spool
+    data:
+      id: '{{ spool_id | int(0) }}'
+      remaining_weight: '{{ states(''input_number.spoolman_set_remaining'') | float(0)
+        }}'
+  mode: single

.ha_mcp/backups/script.spoolman_set_spool_remaining.20261009_002618.yaml

@@ -0,0 +1,60 @@
+# ha_mcp_backup
+schema_version: 1
+domain: script
+entity_id: spoolman_set_spool_remaining
+captured: '2026-10-09T00:26:18.075188+00:00'
+tool: ha_config_set_script
+config:
+  alias: Spoolman - Set Spool Remaining
+  fields:
+    slot:
+      name: CFS Slot
+      description: CFS slot number 1-4 - resolves the spool by the slot color hex
+      selector:
+        number:
+          min: 1
+          max: 4
+          mode: box
+    spool_id:
+      name: Spool ID
+      description: Direct Spoolman spool ID - used when no slot is given
+      selector:
+        number:
+          min: 1
+          max: 9999
+          mode: box
+  sequence:
+  - variables:
+      resolved_id: '{% set n = (slot | int(0)) if slot is defined else 0 %}{% if n
+        >= 1 %}{% set color = states(''sensor.sparkx_i7_cfs_box_1_slot_'' ~ (n | int)
+        ~ ''_color'') | replace(''#'', '''') | lower %}{% set ns = namespace(id='''')
+        %}{% for e in integration_entities(''spoolman'') %}{% if e.endswith(''_color_hex'')
+        and (states(e) | replace(''#'', '''') | lower) == color and ns.id == ''''
+        %}{% set ns.id = states(e[:-10] ~ ''_id'') %}{% endif %}{% endfor %}{{ ns.id
+        }}{% else %}{{ (spool_id | int(0)) if spool_id is defined else 0 }}{% endif
+        %}'
+      slot_n: '{{ (slot | int(0)) if slot is defined else 0 }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ resolved_id | int(0) > 0 }}'
+      sequence:
+      - action: spoolman.patch_spool
+        data:
+          id: '{{ resolved_id | int(0) }}'
+          remaining_weight: '{{ states(''input_number.spoolman_set_remaining'') |
+            float(0) }}'
+    default:
+    - action: notify.persistent_notification
+      data:
+        title: Spoolman - remaining not set
+        message: '{% if slot_n | int >= 1 %}No Spoolman spool matched CFS slot {{
+          slot_n }} (color {{ states(''sensor.sparkx_i7_cfs_box_1_slot_'' ~ (slot_n
+          | int) ~ ''_color'') }}) - register a spool with that color hex in Spoolman,
+          then try again.{% else %}No spool resolved - pass spool_id or a CFS slot
+          1-4. Nothing was set.{% endif %}'
+  mode: single
+  description: Sets a Spoolman spool remaining weight from the shared helper input_number.spoolman_set_remaining.
+    Pass slot (1-4) to resolve the spool by the CFS slot color hex (no remaining-weight
+    guard, so an exhausted spool can be reset to full), or pass spool_id directly.
+    Notifies via persistent notification when nothing could be resolved.

.ha_mcp/backups/script.spoolman_set_spool_remaining.20261015_132353.yaml

@@ -0,0 +1,60 @@
+# ha_mcp_backup
+schema_version: 1
+domain: script
+entity_id: spoolman_set_spool_remaining
+captured: '2026-10-15T13:23:53.118614+00:00'
+tool: ha_config_set_script
+config:
+  alias: Spoolman - Set Spool Remaining
+  fields:
+    slot:
+      name: CFS Slot
+      description: CFS slot number 1-4 - resolves the spool by the slot color hex
+      selector:
+        number:
+          min: 1
+          max: 4
+          mode: box
+    spool_id:
+      name: Spool ID
+      description: Direct Spoolman spool ID - used when no slot is given
+      selector:
+        number:
+          min: 1
+          max: 9999
+          mode: box
+  sequence:
+  - variables:
+      resolved_id: '{% set n = (slot | int(0)) if slot is defined else 0 %}{% if n
+        >= 1 %}{% set ns = namespace(id='''') %}{% for e in integration_entities(''spoolman'')
+        %}{% if e.endswith(''_color_hex'') and (state_attr(e[:-10], ''location'')
+        | default('''', true) | lower) == (''cfs lite '' ~ (n | int)) and ns.id ==
+        '''' %}{% set ns.id = states(e[:-10] ~ ''_id'') %}{% endif %}{% endfor %}{{
+        ns.id }}{% else %}{{ (spool_id | int(0)) if spool_id is defined else 0 }}{%
+        endif %}'
+      slot_n: '{{ (slot | int(0)) if slot is defined else 0 }}'
+  - choose:
+    - conditions:
+        condition: template
+        value_template: '{{ resolved_id | int(0) > 0 }}'
+      sequence:
+      - action: spoolman.patch_spool
+        data:
+          id: '{{ resolved_id | int(0) }}'
+          remaining_weight: '{{ states(''input_number.spoolman_set_remaining'') |
+            float(0) }}'
+    default:
+    - action: notify.persistent_notification
+      data:
+        title: Spoolman - remaining not set
+        message: '{% if slot_n | int >= 1 %}No Spoolman spool matched CFS slot {{
+          slot_n }} (color {{ states(''sensor.sparkx_i7_cfs_box_1_slot_'' ~ (slot_n
+          | int) ~ ''_color'') }}) in the CFS Lite location - register a spool with
+          that color hex and location in Spoolman, then try again.{% else %}No spool
+          resolved - pass spool_id or a CFS slot 1-4. Nothing was set.{% endif %}'
+  mode: single
+  description: Sets a Spoolman spool remaining weight from the shared helper input_number.spoolman_set_remaining.
+    Pass slot (1-4) to resolve the spool by the CFS slot color hex in the CFS Lite
+    location (no remaining-weight guard, so an exhausted spool can be reset to full),
+    or pass spool_id directly. Notifies via persistent notification when nothing could
+    be resolved.

.ha_run.lock

@@ -1 +1 @@
-{"pid": 72, "version": 1, "ha_version": "2026.8.3", "start_ts": 1788057668.905601}
+{"pid": 71, "version": 1, "ha_version": "2026.10.1", "start_ts": 1792306893.29437}

.storage/lovelace.3d_printer_cellphone

@@ -0,0 +1,209 @@
+{
+  "version": 1,
+  "minor_version": 1,
+  "key": "lovelace.3d_printer_cellphone",
+  "data": {
+    "config": {
+      "views": [
+        {
+          "sections": [
+            {
+              "cards": [
+                {
+                  "card": {
+                    "columns": 4,
+                    "square": false,
+                    "type": "grid"
+                  },
+                  "card_param": "cards",
+                  "filter": {
+                    "template": "{% set ns = namespace(cards=[]) %}{% set active_n = (states('sensor.sparkx_i7_active_filament_slot').split('_')[-1] | int(0)) if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] else 0 %}\n{% for n in [1, 2, 3, 4] %}\n  {% set sp = namespace(ent='') %}\n  {% for s in states.sensor %}\n    {% if sp.ent == '' and s.entity_id.startswith('sensor.spoolman_spool_') %}\n      {% set loc = (s.attributes.location | default('')) | lower %}\n      {% if loc == ('cfs lite ' ~ n) %}\n        {% set sp.ent = s.entity_id %}\n      {% endif %}\n    {% endif %}\n  {% endfor %}\n  {% set v = namespace(html='', label='Slot ' ~ n, border='transparent', wrap='', text='#111111', halo='rgba(255,255,255,0.95)', vendor='') %}\n  {% if sp.ent != '' %}\n    {% set hex = state_attr(sp.ent, 'filament_color_hex') | default('44739e') %}\n    {% set hex_clean = hex if hex.startswith('#') else '#' ~ hex %}\n    {% set remain = (state_attr(sp.ent, 'remaining_weight') | default(states(sp.ent)) | float(0)) | round(1) %}\n    {% set total = state_attr(sp.ent, 'filament_weight') | float(1000) %}\n    {% set raw_pct = ((remain / total) * 100) | round(1) if total > 0 else 0 %}\n    {% set pct = 0 if raw_pct < 0 else (100 if raw_pct > 100 else raw_pct) %}\n    {% set rem_n = states(sp.ent) | float(-1) %}{% set tr = hex_clean[1:3] | int(0, 16) %}{% set tg = hex_clean[3:5] | int(0, 16) %}{% set tb = hex_clean[5:7] | int(0, 16) %}{% set lum = 0.2126 * tr + 0.7152 * tg + 0.0722 * tb %}{% set v.text = '#ffffff' if (pct >= 60 and lum <= 170) else '#111111' %}{% set v.halo = 'rgba(0,0,0,0.9)' if v.text == '#ffffff' else 'rgba(255,255,255,0.95)' %}\n    {% set band = 2 if (rem_n >= 0 and rem_n < 25) else (1 if (rem_n >= 0 and rem_n < 100) else 0) %}\n    {% set v.wrap = ' warn-crit' if band == 2 else (' warn-low' if band == 1 else '') %}{% set v.wrap = v.wrap ~ ' active' if (n == active_n) else v.wrap %}\n    {% set v.border = '#d0d0d0' if hex_clean | lower in ['#ffffff', '#fff'] else 'transparent' %}\n    {% set v.html = \"<div class='tube-bg'><div class='tube-fill' style='height: \" ~ pct ~ \"%; background-color: \" ~ hex_clean ~ \";'></div><div class='tube-text'>\" ~ remain ~ \"g</div></div>\" %}\n    {% set v.vendor = (state_attr(sp.ent, 'filament_vendor_name') | default('') | string | trim) %}{% set v.label = 'Slot ' ~ n ~ (' ⚠' if band > 0 else '') %}\n  {% else %}\n    {% set v.html = \"<div class='tube-bg tube-empty'></div>\" %}\n    {% set v.label = \"<span class='slot-warn'>Slot \" ~ n ~ \" — empty</span>\" %}\n  {% endif %}\n  {% set card = {\n    \"type\": \"custom:button-card\",\n    \"entity\": sp.ent if sp.ent != '' else 'sensor.sparkx_i7_active_filament_slot',\n    \"show_icon\": false,\n    \"show_state\": false,\n    \"show_name\": false,\n    \"custom_fields\": {\n      \"tube\": \"<div class='tube-wrap\" ~ v.wrap ~ \"'>\" ~ ((\"<div class='slot-vendor'>\" ~ v.vendor ~ \"</div>\") if v.vendor else '') ~ v.html ~ \"<div class='slot-label'>\" ~ v.label ~ \"</div></div>\"\n    },\n    \"styles\": {\n      \"card\": [\n        {\"background\": \"transparent\"},\n        {\"box-shadow\": \"none\"},\n        {\"border\": \"none\"},\n        {\"padding\": \"8px 2px\"},\n        {\"display\": \"flex\"},\n        {\"flex-direction\": \"column\"},\n        {\"align-items\": \"center\"}\n      ],\n      \"custom_fields\": {\n        \"tube\": [\n          {\"width\": \"100%\"},\n          {\"display\": \"flex\"},\n          {\"flex-direction\": \"column\"},\n          {\"align-items\": \"center\"}\n        ]\n      }\n    },\n    \"extra_styles\": \"\n      .tube-wrap.active .tube-bg { box-shadow: 0 0 10px 2px var(--primary-color); } .tube-wrap.active .slot-label { color: var(--primary-color); font-weight: 800; } .tube-wrap.active .slot-vendor { color: var(--primary-color); font-weight: 800; }      .tube-wrap {\n        display: flex;\n        flex-direction: column;\n        align-items: center;\n        width: 100%;\n      }\n      .tube-bg {\n        position: relative;\n        width: 60px;\n        height: 180px;\n        background-color: #dedede;\n        border-radius: 20px;\n        overflow: hidden;\n        border: 1px solid \" ~ v.border ~ \";\n        display: flex;\n        flex-direction: column;\n        justify-content: flex-end;\n      }\n      .tube-empty {\n        background: transparent;\n        border: 2px dashed var(--error-color);\n      }\n      .tube-fill {\n        width: 100%;\n        border-radius: 0 0 19px 19px;\n      }\n      .tube-text {\n        position: absolute;\n        top: 48%;\n        left: 50%;\n        transform: translate(-50%, -50%);\n        font-size: 13px;\n        font-weight: 800;\n        color: \" ~ v.text ~ \";        text-shadow: 0 0 3px \" ~ v.halo ~ \", 0 0 6px \" ~ v.halo ~ \";\n        pointer-events: none;\n        z-index: 2;\n        white-space: nowrap;\n      }\n      .slot-label {\n        margin-top: 8px;\n        font-size: Line truncated
+                  },
+                  "type": "custom:auto-entities"
+                },
+                {
+                  "type": "horizontal-stack",
+                  "grid_options": {
+                    "columns": "full"
+                  },
+                  "cards": [
+                    {
+                      "type": "markdown",
+                      "content": "{% if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] %}{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}{% set cur = states('sensor.sparkx_i7_used_material_length') | float(0) %}{% set ck = states('input_number.sparkx_i7_spoolman_length_checkpoint') | float(0) %}{% set booked = states('input_number.sparkx_i7_slot_1_grams') | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if states('sensor.sparkx_i7_active_filament_slot') == 'box_1_slot_1' else 0) %}{{ live | round(1) }}g{% else %}{{ (states('input_number.sparkx_i7_slot_1_grams') | float(0)) | round(1) }}g{% endif %}",
+                      "card_mod": {
+                        "style": "ha-card { background: transparent; box-shadow: none; border: none; padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: left; font-size: 11px; line-height: 1; }"
+                      }
+                    },
+                    {
+                      "type": "markdown",
+                      "content": "{% if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] %}{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}{% set cur = states('sensor.sparkx_i7_used_material_length') | float(0) %}{% set ck = states('input_number.sparkx_i7_spoolman_length_checkpoint') | float(0) %}{% set booked = states('input_number.sparkx_i7_slot_2_grams') | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if states('sensor.sparkx_i7_active_filament_slot') == 'box_1_slot_2' else 0) %}{{ live | round(1) }}g{% else %}{{ (states('input_number.sparkx_i7_slot_2_grams') | float(0)) | round(1) }}g{% endif %}",
+                      "card_mod": {
+                        "style": "ha-card { background: transparent; box-shadow: none; border: none; padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: left; font-size: 11px; line-height: 1; }"
+                      }
+                    },
+                    {
+                      "type": "markdown",
+                      "content": "{% if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] %}{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}{% set cur = states('sensor.sparkx_i7_used_material_length') | float(0) %}{% set ck = states('input_number.sparkx_i7_spoolman_length_checkpoint') | float(0) %}{% set booked = states('input_number.sparkx_i7_slot_3_grams') | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if states('sensor.sparkx_i7_active_filament_slot') == 'box_1_slot_3' else 0) %}{{ live | round(1) }}g{% else %}{{ (states('input_number.sparkx_i7_slot_3_grams') | float(0)) | round(1) }}g{% endif %}",
+                      "card_mod": {
+                        "style": "ha-card { background: transparent; box-shadow: none; border: none; padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: left; font-size: 11px; line-height: 1; }"
+                      }
+                    },
+                    {
+                      "type": "markdown",
+                      "content": "{% if states('sensor.sparkx_i7_print_status') in ['printing', 'paused'] %}{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}{% set cur = states('sensor.sparkx_i7_used_material_length') | float(0) %}{% set ck = states('input_number.sparkx_i7_spoolman_length_checkpoint') | float(0) %}{% set booked = states('input_number.sparkx_i7_slot_4_grams') | float(0) %}{% set live = booked + ((([cur - ck, 0] | max) * gcm) if states('sensor.sparkx_i7_active_filament_slot') == 'box_1_slot_4' else 0) %}{{ live | round(1) }}g{% else %}{{ (states('input_number.sparkx_i7_slot_4_grams') | float(0)) | round(1) }}g{% endif %}",
+                      "card_mod": {
+                        "style": "ha-card { background: transparent; box-shadow: none; border: none; padding: 0 4px; margin: 0; text-align: left; } .markdown { padding: 0; margin: 0; text-align: left; } p { margin: 0; padding: 0; text-align: left; font-size: 11px; line-height: 1; }"
+                      }
+                    }
+                  ]
+                },
+                {
+                  "entity": "sensor.sparkx_i7_cfs_box_1_humidity",
+                  "grid_options": {
+                    "columns": 6
+                  },
+                  "icon": "mdi:water-percent",
+                  "name": "Humidity",
+                  "type": "tile"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_cfs_box_1_temperature",
+                  "grid_options": {
+                    "columns": 6
+                  },
+                  "icon": "mdi:thermometer",
+                  "name": "Temperature",
+                  "type": "tile"
+                },
+                {
+                  "cards": [
+                    {
+                      "entity": "sensor.sparkx_i7_active_filament_slot",
+                      "grid_options": {
+                        "columns": "full"
+                      },
+                      "icon": "mdi:magnet",
+                      "icon_color": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}{% set c = states('sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color') | replace('#', '') | lower %}{% if c | length == 6 %}#{{ c }}{% else %}var(--primary-color){% endif %}",
+                      "multiline_secondary": true,
+                      "name": "Next Deduction Match",
+                      "primary": "{{ states('sensor.sparkx_i7_active_filament_slot') }}",
+                      "secondary": "{% set slot = states('sensor.sparkx_i7_active_filament_slot') %}\n{% set n = slot.split('_')[-1] %}\n{% set ce = 'sensor.sparkx_i7_cfs_' ~ (slot | lower | replace(' ', '_')) ~ '_color' %}\n{% set color = states(ce) | replace('#', '') | lower %}\n{% set ns = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman') %}\n{% if e.endswith('_color_hex') and (state_attr(e[:-10], 'location') | default('', true) | lower) == ('cfs lite ' ~ n) and ns.id == '' %}\n{% set ns.id = states(e[:-10] ~ '_id') %}\n{% set ns.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor %}\n{% if slot in ['', 'unknown', 'unavailable'] %}No slot latched\n{% elif ns.id == '' %}No spool assigned to CFS Lite {{ n }}\n{% elif ns.rem < 0 %}Color #{{ color | upper }} → spool {{ ns.id }} unreachable\n{% elif ns.rem == 0 %}Color #{{ color | upper }} → spool {{ ns.id }} is EMPTY\n{% else %}Color #{{ color | upper }} → spool {{ ns.id }} ({{ states('sensor.spoolman_spool_' ~ ns.id ~ '_filament_name') }} · {{ ns.rem | round(1) }} g left)\n{% endif %}\n",
+                      "type": "custom:mushroom-template-card"
+                    }
+                  ],
+                  "grid_options": {
+                    "columns": "full"
+                  },
+                  "type": "horizontal-stack"
+                },
+                {
+                  "heading": "Last/Current Print Job",
+                  "heading_style": "title",
+                  "icon": "mdi:printer-3d",
+                  "type": "heading"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_used_material_length",
+                  "grid_options": {
+                    "columns": 6,
+                    "rows": 1
+                  },
+                  "icon": "mdi:plus-minus",
+                  "name": "Used Material Total",
+                  "type": "tile"
+                },
+                {
+                  "entity": "sensor.sparkx_moonraker_print_eta",
+                  "features_position": "bottom",
+                  "grid_options": {
+                    "columns": 6,
+                    "rows": 1
+                  },
+                  "name": "Print ETA",
+                  "type": "tile",
+                  "vertical": false
+                },
+                {
+                  "entity": "sensor.sparkx_i7_filament_weight_estimated",
+                  "grid_options": {
+                    "columns": 6,
+                    "rows": "auto"
+                  },
+                  "icon": "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in ['printing', 'paused'] %}\n  mdi:printer-3d-nozzle\n{% else %}\n  mdi:cash-multiple\n{% endif %}",
+                  "icon_color": "{% set st = states('sensor.sparkx_i7_print_status') %} {% if st in ['printing', 'paused'] %}\n  blue\n{% else %}\n  green\n{% endif %}",
+                  "multiline_secondary": true,
+                  "primary": "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set w = states('sensor.sparkx_i7_filament_weight_estimated') %}\n{% if st in ['printing', 'paused'] %}\n  {% if is_number(w) %}{{ w | float | round(1) }} g{% else %}weight unavailable{% endif %}\n{% else %}\n  Last: {{ states('input_number.sparkx_i7_last_job_filament_weight') | float(0) | round(1) }} g\n{% endif %}\n",
+                  "secondary": "{% set st = states('sensor.sparkx_i7_print_status') %}\n{% set c = states('sensor.sparkx_i7_filament_cost') %}\n{% if st in ['printing', 'paused'] %}\n  {% if is_number(c) %}{{ c | float | round(2) }} $ (live){% else %}cost unavailable{% endif %}\n{% else %}\n  {{ states('input_number.sparkx_i7_last_job_cost') | float(0) | round(2) }} $ (last job)\n{% endif %}\n",
+                  "type": "custom:mushroom-template-card"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_expected_material_length",
+                  "grid_options": {
+                    "columns": 6,
+                    "rows": "auto"
+                  },
+                  "icon": "mdi:scale-balance",
+                  "icon_color": "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length') | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight') | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length') | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color') | default('', true) | string).split(';') %}\n{% set q = p | replace('#','') | lower | trim %}\n{% if q not in ['','none','unknown','unavailable'] %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot') | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false, ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n{% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location') | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10] %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status') | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown', label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle' %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{% elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH' %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough' %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'ok' %}green{% elif v.state == 'short' %}red{% elif v.state in ['none','idle'] %}grey{% else %}orange{% endif %}",
+                  "multiline_secondary": true,
+                  "name": "Filament Sufficiency",
+                  "primary": "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length') | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight') | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length') | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color') | default('', true) | string).split(';') %}\n{% set q = p | replace('#','') | lower | trim %}\n{% if q not in ['','none','unknown','unavailable'] %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot') | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false, ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n{% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location') | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10] %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status') | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown', label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle' %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{% elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH' %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough' %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle' %}no active print{% else %}{{ job_g }} g needed · {{ used_g }} g used{% endif %}",
+                  "secondary": "{% set gcm = states('input_number.sparkx_i7_filament_g_cm') | float(0.0298) %}\n{% set lencm = states('sensor.sparkx_i7_expected_material_length') | float(0) %}\n{% set wgt = states('sensor.sparkx_i7_expected_material_weight') | float(0) %}\n{% set job_g = ((wgt if wgt > 0 else lencm * gcm) | round(1)) %}\n{% set used_g = ((states('sensor.sparkx_i7_used_material_length') | float(0)) * gcm) | round(1) %}\n{% set rem_g = ([job_g - used_g, 0] | max) | round(1) %}\n{% set gc = namespace(list=[]) %}\n{% for p in (state_attr('sensor.sparkx_i7_expected_material_length','color') | default('', true) | string).split(';') %}\n{% set q = p | replace('#','') | lower | trim %}\n{% if q not in ['','none','unknown','unavailable'] %}{% set gc.list = gc.list + [q] %}{% endif %}\n{% endfor %}\n{% set single = (gc.list | length) == 1 %}\n{% set aslot = (states('sensor.sparkx_i7_active_filament_slot') | default('', true) | string).split('_')[-1] %}\n{% set aslot = aslot if aslot in ['1','2','3','4'] else '' %}\n{% set s = namespace(short=false, ok=false, matched=0, active=false) %}\n{% for n in ['1','2','3','4'] %}\n{% set sp = namespace(id='', rem=-1) %}\n{% for e in integration_entities('spoolman') if e.endswith('_color_hex') %}\n{% if sp.id == '' and (state_attr(e[:-10],'location') | default('', true) | lower) == ('cfs lite ' ~ n) %}\n{% set sp.id = e[:-10] %}\n{% set sp.rem = states(e[:-10]) | float(-1) %}\n{% endif %}\n{% endfor %}\n{% if sp.id != '' and sp.rem >= 0 %}\n{% set s.matched = s.matched + 1 %}\n{% if single %}\n{% if n == aslot %}\n{% set s.active = true %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% else %}\n{% if sp.rem < job_g %}{% set s.short = true %}{% else %}{% set s.ok = true %}{% endif %}\n{% endif %}\n{% endif %}\n{% endfor %}\n{% set active = (states('sensor.sparkx_i7_print_status') | default('', true)) in ['printing','paused'] %}\n{% set v = namespace(state='unknown', label='check unavailable') %}\n{% if not active %}\n{% set v.state = 'idle' %}\n{% set v.label = 'no active print' %}\n{% elif job_g <= 0 %}\n{% set v.state = 'none' %}\n{% set v.label = 'no slicer estimate yet' %}\n{% elif s.short %}\n{% set v.state = 'short' %}\n{% set v.label = 'NOT ENOUGH' %}\n{% elif s.ok %}\n{% set v.state = 'ok' %}\n{% set v.label = 'enough' %}\n{% elif single and aslot == '' %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no active CFS slot' %}\n{% elif single and not s.active %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'active slot has no spool' %}\n{% elif s.matched == 0 %}\n{% set v.state = 'unknown' %}\n{% set v.label = 'no spool loaded' %}\n{% endif %}\n{% if v.state == 'idle' %}last job: {{ job_g }} g needed{% else %}{{ rem_g }} g left to print · {{ v.label }}{% endif %}",
+                  "type": "custom:mushroom-template-card"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_nozzle_temperature",
+                  "grid_options": {
+                    "columns": 4
+                  },
+                  "max": 300,
+                  "min": 0,
+                  "name": "Nozzle",
+                  "severity": {
+                    "green": 0,
+                    "red": 240,
+                    "yellow": 180
+                  },
+                  "type": "gauge",
+                  "unit": "°C"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_bed_temperature",
+                  "grid_options": {
+                    "columns": 4
+                  },
+                  "max": 100,
+                  "min": 0,
+                  "name": "Bed",
+                  "severity": {
+                    "green": 0,
+                    "red": 100,
+                    "yellow": 60
+                  },
+                  "type": "gauge",
+                  "unit": "°C"
+                },
+                {
+                  "entity": "sensor.sparkx_i7_real_time_flow",
+                  "grid_options": {
+                    "columns": 4
+                  },
+                  "max": 40,
+                  "min": 0,
+                  "name": "Flow",
+                  "severity": {
+                    "green": 0,
+                    "red": 24,
+                    "yellow": 12
+                  },
+                  "type": "gauge"
+                }
+              ],
+              "type": "grid"
+            }
+          ],
+          "type": "sections"
+        }
+      ]
+    }
+  }
+}

.storage/lovelace.ender5_printer

@@ -673,6 +673,24 @@
                   ]
                 }
               ]
+            },
+            {
+              "type": "grid",
+              "cards": [
+                {
+                  "type": "heading",
+                  "heading": "New section"
+                },
+                {
+                  "show_state": true,
+                  "show_name": true,
+                  "camera_view": "live",
+                  "fit_mode": "cover",
+                  "type": "picture-entity",
+                  "entity": "camera.sparkx_i7_printer_camera",
+                  "camera_image": "camera.sparkx_i7_printer_camera"
+                }
+              ]
             }
           ]
         }